| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet/mlx5: Always stop health timer during driver removal\n\nCurrently, if teardown_hca fails to execute during driver removal, mlx5\ndoes not stop the health timer. Afterwards, mlx5 continue with driver\nteardown. This may lead to a UAF bug, which results in page fault\nOops[1], since the health timer invokes after resources were freed.\n\nHence, stop the health monitor even if teardown_hca fails.\n\n[1]\nmlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)\nmlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)\nmlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)\nmlx5_core 0000:18:00.0: E-Switch: cleanup\nmlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource\nmlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup\nBUG: unable to handle page fault for address: ffffa26487064230\nPGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0\nOops: 0000 [#1] PREEMPT SMP PTI\nCPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1\nHardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020\nRIP: 0010:ioread32be+0x34/0x60\nRSP: 0018:ffffa26480003e58 EFLAGS: 00010292\nRAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0\nRDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230\nRBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8\nR10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0\nR13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0\nFS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000\nCS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\nCR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0\nDR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\nDR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400\nPKRU: 55555554\nCall Trace:\n <IRQ>\n ? __die+0x23/0x70\n ? page_fault_oops+0x171/0x4e0\n ? exc_page_fault+0x175/0x180\n ? asm_exc_page_fault+0x26/0x30\n ? __pfx_poll_health+0x10/0x10 [mlx5_core]\n ? __pfx_poll_health+0x10/0x10 [mlx5_core]\n ? ioread32be+0x34/0x60\n mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core]\n ? __pfx_poll_health+0x10/0x10 [mlx5_core]\n poll_health+0x42/0x230 [mlx5_core]\n ? __next_timer_interrupt+0xbc/0x110\n ? __pfx_poll_health+0x10/0x10 [mlx5_core]\n call_timer_fn+0x21/0x130\n ? __pfx_poll_health+0x10/0x10 [mlx5_core]\n __run_timers+0x222/0x2c0\n run_timer_softirq+0x1d/0x40\n __do_softirq+0xc9/0x2c8\n __irq_exit_rcu+0xa6/0xc0\n sysvec_apic_timer_interrupt+0x72/0x90\n </IRQ>\n <TASK>\n asm_sysvec_apic_timer_interrupt+0x1a/0x20\nRIP: 0010:cpuidle_enter_state+0xcc/0x440\n ? cpuidle_enter_state+0xbd/0x440\n cpuidle_enter+0x2d/0x40\n do_idle+0x20d/0x270\n cpu_startup_entry+0x2a/0x30\n rest_init+0xd0/0xd0\n arch_call_rest_init+0xe/0x30\n start_kernel+0x709/0xa90\n x86_64_start_reservations+0x18/0x30\n x86_64_start_kernel+0x96/0xa0\n secondary_startup_64_no_verify+0x18f/0x19b\n---[ end trace 0000000000000000 ]---" |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/ethernet/mellanox/mlx5/core/main.c" |
| ], |
| "versions": [ |
| { |
| "version": "9b98d395b85dd042fe83fb696b1ac02e6c93a520", |
| "lessThan": "e7d4485d47839f4d1284592ae242c4e65b2810a9", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "9b98d395b85dd042fe83fb696b1ac02e6c93a520", |
| "lessThan": "6ccada6ffb42e0ac75e3db06d41baf5a7f483f8a", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "9b98d395b85dd042fe83fb696b1ac02e6c93a520", |
| "lessThan": "e6777ae0bf6fd5bc626bb051c8c93e3c8198a3f8", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "9b98d395b85dd042fe83fb696b1ac02e6c93a520", |
| "lessThan": "c8b3f38d2dae0397944814d691a419c451f9906f", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/ethernet/mellanox/mlx5/core/main.c" |
| ], |
| "versions": [ |
| { |
| "version": "6.1", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "6.1", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.95", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.35", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.9.6", |
| "lessThanOrEqual": "6.9.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.10", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.1", |
| "versionEndExcluding": "6.1.95" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.1", |
| "versionEndExcluding": "6.6.35" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.1", |
| "versionEndExcluding": "6.9.6" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.1", |
| "versionEndExcluding": "6.10" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/e7d4485d47839f4d1284592ae242c4e65b2810a9" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/6ccada6ffb42e0ac75e3db06d41baf5a7f483f8a" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/e6777ae0bf6fd5bc626bb051c8c93e3c8198a3f8" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/c8b3f38d2dae0397944814d691a419c451f9906f" |
| } |
| ], |
| "title": "net/mlx5: Always stop health timer during driver removal", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2024-40906", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
