| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: ath10k: avoid NULL pointer error during sdio remove\n\nWhen running 'rmmod ath10k', ath10k_sdio_remove() will free sdio\nworkqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON\nis set to yes, kernel panic will happen:\nCall trace:\n destroy_workqueue+0x1c/0x258\n ath10k_sdio_remove+0x84/0x94\n sdio_bus_remove+0x50/0x16c\n device_release_driver_internal+0x188/0x25c\n device_driver_detach+0x20/0x2c\n\nThis is because during 'rmmod ath10k', ath10k_sdio_remove() will call\nath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release()\nwill finally be called in ath10k_core_destroy(). This function will free\nstruct cfg80211_registered_device *rdev and all its members, including\nwiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio\nworkqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON.\n\nAfter device release, destroy_workqueue() will use NULL pointer then the\nkernel panic happen.\n\nCall trace:\nath10k_sdio_remove\n ->ath10k_core_unregister\n ……\n ->ath10k_core_stop\n ->ath10k_hif_stop\n ->ath10k_sdio_irq_disable\n ->ath10k_hif_power_down\n ->del_timer_sync(&ar_sdio->sleep_timer)\n ->ath10k_core_destroy\n ->ath10k_mac_destroy\n ->ieee80211_free_hw\n ->wiphy_free\n ……\n ->wiphy_dev_release\n ->destroy_workqueue\n\nNeed to call destroy_workqueue() before ath10k_core_destroy(), free\nthe work queue buffer first and then free pointer of work queue by\nath10k_core_destroy(). This order matches the error path order in\nath10k_sdio_probe().\n\nNo work will be queued on sdio workqueue between it is destroyed and\nath10k_core_destroy() is called. Based on the call_stack above, the\nreason is:\nOnly ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and\nath10k_sdio_irq_disable() will queue work on sdio workqueue.\nSleep timer will be deleted before ath10k_core_destroy() in\nath10k_hif_power_down().\nath10k_sdio_irq_disable() only be called in ath10k_hif_stop().\nath10k_core_unregister() will call ath10k_hif_power_down() to stop hif\nbus, so ath10k_sdio_hif_tx_sg() won't be called anymore.\n\nTested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189" |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/wireless/ath/ath10k/sdio.c" |
| ], |
| "versions": [ |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "27d5d217ae7ffb99dd623375a17a7d3418d9c755", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "27fda36eedad9e4ec795dc481f307901d1885112", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "6e5dbd1c04abf2c19b2282915e6fa48b6ccc6921", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "b35de9e01fc79c7baac666fb2dcb4ba7698a1d97", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "543c0924d446b21f35701ca084d7feca09511220", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "95c38953cb1ecf40399a676a1f85dfe2b5780a9a", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/wireless/ath/ath10k/sdio.c" |
| ], |
| "versions": [ |
| { |
| "version": "5.10.237", |
| "lessThanOrEqual": "5.10.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.15.181", |
| "lessThanOrEqual": "5.15.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.127", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.70", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.12.5", |
| "lessThanOrEqual": "6.12.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.13", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.10.237" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.15.181" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.1.127" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.6.70" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.12.5" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.13" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/27d5d217ae7ffb99dd623375a17a7d3418d9c755" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/27fda36eedad9e4ec795dc481f307901d1885112" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/6e5dbd1c04abf2c19b2282915e6fa48b6ccc6921" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/b35de9e01fc79c7baac666fb2dcb4ba7698a1d97" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/543c0924d446b21f35701ca084d7feca09511220" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/95c38953cb1ecf40399a676a1f85dfe2b5780a9a" |
| } |
| ], |
| "title": "wifi: ath10k: avoid NULL pointer error during sdio remove", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2024-56599", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
