| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: wilc1000: unregister wiphy only if it has been registered\n\nThere is a specific error path in probe functions in wilc drivers (both\nsdio and spi) which can lead to kernel panic, as this one for example\nwhen using SPI:\n\nUnable to handle kernel paging request at virtual address 9f000000 when read\n[9f000000] *pgd=00000000\nInternal error: Oops: 5 [#1] ARM\nModules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc\nCPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22\nHardware name: Atmel SAMA5\nPC is at wiphy_unregister+0x244/0xc40 [cfg80211]\nLR is at wiphy_unregister+0x1c0/0xc40 [cfg80211]\n[...]\n wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000]\n wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi]\n wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4\n spi_probe from really_probe+0x270/0xb2c\n really_probe from __driver_probe_device+0x1dc/0x4e8\n __driver_probe_device from driver_probe_device+0x5c/0x140\n driver_probe_device from __driver_attach+0x220/0x540\n __driver_attach from bus_for_each_dev+0x13c/0x1a8\n bus_for_each_dev from bus_add_driver+0x2a0/0x6a4\n bus_add_driver from driver_register+0x27c/0x51c\n driver_register from do_one_initcall+0xf8/0x564\n do_one_initcall from do_init_module+0x2e4/0x82c\n do_init_module from load_module+0x59a0/0x70c4\n load_module from init_module_from_file+0x100/0x148\n init_module_from_file from sys_finit_module+0x2fc/0x924\n sys_finit_module from ret_fast_syscall+0x0/0x1c\n\nThe issue can easily be reproduced, for example by not wiring correctly\na wilc device through SPI (and so, make it unresponsive to early SPI\ncommands). It is due to a recent change decoupling wiphy allocation from\nwiphy registration, however wilc_netdev_cleanup has not been updated\naccordingly, letting it possibly call wiphy unregister on a wiphy which\nhas never been registered.\n\nFix this crash by moving wiphy_unregister/wiphy_free out of\nwilc_netdev_cleanup, and by adjusting error paths in both drivers" |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/wireless/microchip/wilc1000/netdev.c", |
| "drivers/net/wireless/microchip/wilc1000/sdio.c", |
| "drivers/net/wireless/microchip/wilc1000/spi.c" |
| ], |
| "versions": [ |
| { |
| "version": "fbdf0c5248dce4b55181e9aff8f1b61819ba6bd7", |
| "lessThan": "c7115b8229f3e6cdfae43b1cdd180f5b6c67cd70", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "fbdf0c5248dce4b55181e9aff8f1b61819ba6bd7", |
| "lessThan": "1be94490b6b8a06ff14cd23fda8714e6ec37cdfb", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/wireless/microchip/wilc1000/netdev.c", |
| "drivers/net/wireless/microchip/wilc1000/sdio.c", |
| "drivers/net/wireless/microchip/wilc1000/spi.c" |
| ], |
| "versions": [ |
| { |
| "version": "6.13", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "6.13", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.13.2", |
| "lessThanOrEqual": "6.13.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.14", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.13", |
| "versionEndExcluding": "6.13.2" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.13", |
| "versionEndExcluding": "6.14" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/c7115b8229f3e6cdfae43b1cdd180f5b6c67cd70" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/1be94490b6b8a06ff14cd23fda8714e6ec37cdfb" |
| } |
| ], |
| "title": "wifi: wilc1000: unregister wiphy only if it has been registered", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2024-57992", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
