| From bippy-5f407fcff5a0 Mon Sep 17 00:00:00 2001 |
| From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
| To: <linux-cve-announce@vger.kernel.org> |
| Reply-to: <cve@kernel.org>, <linux-kernel@vger.kernel.org> |
| Subject: CVE-2022-48902: btrfs: do not WARN_ON() if we have PageError set |
| |
| Description |
| =========== |
| |
| In the Linux kernel, the following vulnerability has been resolved: |
| |
| btrfs: do not WARN_ON() if we have PageError set |
| |
| Whenever we do any extent buffer operations we call |
| assert_eb_page_uptodate() to complain loudly if we're operating on an |
| non-uptodate page. Our overnight tests caught this warning earlier this |
| week |
| |
| WARNING: CPU: 1 PID: 553508 at fs/btrfs/extent_io.c:6849 assert_eb_page_uptodate+0x3f/0x50 |
| CPU: 1 PID: 553508 Comm: kworker/u4:13 Tainted: G W 5.17.0-rc3+ #564 |
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 |
| Workqueue: btrfs-cache btrfs_work_helper |
| RIP: 0010:assert_eb_page_uptodate+0x3f/0x50 |
| RSP: 0018:ffffa961440a7c68 EFLAGS: 00010246 |
| RAX: 0017ffffc0002112 RBX: ffffe6e74453f9c0 RCX: 0000000000001000 |
| RDX: ffffe6e74467c887 RSI: ffffe6e74453f9c0 RDI: ffff8d4c5efc2fc0 |
| RBP: 0000000000000d56 R08: ffff8d4d4a224000 R09: 0000000000000000 |
| R10: 00015817fa9d1ef0 R11: 000000000000000c R12: 00000000000007b1 |
| R13: ffff8d4c5efc2fc0 R14: 0000000001500000 R15: 0000000001cb1000 |
| FS: 0000000000000000(0000) GS:ffff8d4dbbd00000(0000) knlGS:0000000000000000 |
| CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 |
| CR2: 00007ff31d3448d8 CR3: 0000000118be8004 CR4: 0000000000370ee0 |
| Call Trace: |
| |
| extent_buffer_test_bit+0x3f/0x70 |
| free_space_test_bit+0xa6/0xc0 |
| load_free_space_tree+0x1f6/0x470 |
| caching_thread+0x454/0x630 |
| ? rcu_read_lock_sched_held+0x12/0x60 |
| ? rcu_read_lock_sched_held+0x12/0x60 |
| ? rcu_read_lock_sched_held+0x12/0x60 |
| ? lock_release+0x1f0/0x2d0 |
| btrfs_work_helper+0xf2/0x3e0 |
| ? lock_release+0x1f0/0x2d0 |
| ? finish_task_switch.isra.0+0xf9/0x3a0 |
| process_one_work+0x26d/0x580 |
| ? process_one_work+0x580/0x580 |
| worker_thread+0x55/0x3b0 |
| ? process_one_work+0x580/0x580 |
| kthread+0xf0/0x120 |
| ? kthread_complete_and_exit+0x20/0x20 |
| ret_from_fork+0x1f/0x30 |
| |
| This was partially fixed by c2e39305299f01 ("btrfs: clear extent buffer |
| uptodate when we fail to write it"), however all that fix did was keep |
| us from finding extent buffers after a failed writeout. It didn't keep |
| us from continuing to use a buffer that we already had found. |
| |
| In this case we're searching the commit root to cache the block group, |
| so we can start committing the transaction and switch the commit root |
| and then start writing. After the switch we can look up an extent |
| buffer that hasn't been written yet and start processing that block |
| group. Then we fail to write that block out and clear Uptodate on the |
| page, and then we start spewing these errors. |
| |
| Normally we're protected by the tree lock to a certain degree here. If |
| we read a block we have that block read locked, and we block the writer |
| from locking the block before we submit it for the write. However this |
| isn't necessarily fool proof because the read could happen before we do |
| the submit_bio and after we locked and unlocked the extent buffer. |
| |
| Also in this particular case we have path->skip_locking set, so that |
| won't save us here. We'll simply get a block that was valid when we |
| read it, but became invalid while we were using it. |
| |
| What we really want is to catch the case where we've "read" a block but |
| it's not marked Uptodate. On read we ClearPageError(), so if we're |
| !Uptodate and !Error we know we didn't do the right thing for reading |
| the page. |
| |
| Fix this by checking !Uptodate && !Error, this way we will not complain |
| if our buffer gets invalidated while we're using it, and we'll maintain |
| the spirit of the check which is to make sure we have a fully in-cache |
| block while we're messing with it. |
| |
| The Linux kernel CVE team has assigned CVE-2022-48902 to this issue. |
| |
| |
| Affected and fixed versions |
| =========================== |
| |
| Fixed in 5.15.27 with commit e00077aa439f0e8f416699fa4e9600db6583db70 |
| Fixed in 5.16.13 with commit 9efcc83b33b576302147634eca9bece8e3737e34 |
| Fixed in 5.17 with commit a50e1fcbc9b85fd4e95b89a75c0884cb032a3e06 |
| |
| Please see https://www.kernel.org for a full list of currently supported |
| kernel versions by the kernel community. |
| |
| Unaffected versions might change over time as fixes are backported to |
| older supported kernel versions. The official CVE entry at |
| https://cve.org/CVERecord/?id=CVE-2022-48902 |
| will be updated if fixes are backported, please check that for the most |
| up to date information about this issue. |
| |
| |
| Affected files |
| ============== |
| |
| The file(s) affected by this issue are: |
| fs/btrfs/extent_io.c |
| |
| |
| Mitigation |
| ========== |
| |
| The Linux kernel CVE team recommends that you update to the latest |
| stable kernel version for this, and many other bugfixes. Individual |
| changes are never tested alone, but rather are part of a larger kernel |
| release. Cherry-picking individual commits is not recommended or |
| supported by the Linux kernel community at all. If however, updating to |
| the latest release is impossible, the individual changes to resolve this |
| issue can be found at these commits: |
| https://git.kernel.org/stable/c/e00077aa439f0e8f416699fa4e9600db6583db70 |
| https://git.kernel.org/stable/c/9efcc83b33b576302147634eca9bece8e3737e34 |
| https://git.kernel.org/stable/c/a50e1fcbc9b85fd4e95b89a75c0884cb032a3e06 |