| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Fix premature hw access after PCI error\n\nAfter a recoverable PCI error has been detected and recovered, qla driver\nneeds to check to see if the error condition still persist and/or wait\nfor the OS to give the resume signal.\n\nSep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440\nqla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx]\nSep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60\n[qla2xxx]\nSep 8 22:26:03 localhost kernel: Call Trace:\nSep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx]\nSep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160\n[qla2xxx]\nSep 8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx]\nSep 8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120\n[qla2xxx]\nSep 8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80\nSep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80\nSep 8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90\nSep 8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0\nSep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240\nSep 8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0\nSep 8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360\n..\nSep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI\ndisconnect.\nSep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22:\nqla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h\nSep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to\ncapture FW dump\nSep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0,\nwaited 5221 msecs\nSep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio\nenabled returning.\nSep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX\nCommand timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5\nmb[0-3]=[0xffff 0xffff 0xffff 0xffff]" |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/scsi/qla2xxx/qla_os.c", |
| "drivers/scsi/qla2xxx/qla_tmpl.c" |
| ], |
| "versions": [ |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "5ef6319f9882699613d5182fbd7929b017e8c5ab", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "d7994dff9071555a959a168f9184dd9abae68a6b", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "6c125fd5ad035777f7b471553f7ddda76e8e7136", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "e35920ab7874d5e2faeb4f958a74bfa793f1ce5a", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/scsi/qla2xxx/qla_os.c", |
| "drivers/scsi/qla2xxx/qla_tmpl.c" |
| ], |
| "versions": [ |
| { |
| "version": "5.15.33", |
| "lessThanOrEqual": "5.15.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.16.19", |
| "lessThanOrEqual": "5.16.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.17.2", |
| "lessThanOrEqual": "5.17.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.18", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.15.33" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.16.19" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.17.2" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.18" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/5ef6319f9882699613d5182fbd7929b017e8c5ab" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/d7994dff9071555a959a168f9184dd9abae68a6b" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/6c125fd5ad035777f7b471553f7ddda76e8e7136" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/e35920ab7874d5e2faeb4f958a74bfa793f1ce5a" |
| } |
| ], |
| "title": "scsi: qla2xxx: Fix premature hw access after PCI error", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2022-49157", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
