| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: dwc2: fix a devres leak in hw_enable upon suspend resume\n\nEach time the platform goes to low power, PM suspend / resume routines\ncall: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset().\nThis adds a new devres each time.\nThis may also happen at runtime, as dwc2_lowlevel_hw_enable() can be\ncalled from udc_start().\n\nThis can be seen with tracing:\n- echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable\n- go to low power\n- cat /sys/kernel/debug/tracing/trace\n\nA new \"ADD\" entry is found upon each low power cycle:\n... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes)\n... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes)\n...\n\nA second issue is addressed here:\n- regulator_bulk_enable() is called upon each PM cycle (suspend/resume).\n- regulator_bulk_disable() never gets called.\n\nSo the reference count for these regulators constantly increase, by one\nupon each low power cycle, due to missing regulator_bulk_disable() call\nin __dwc2_lowlevel_hw_disable().\n\nThe original fix that introduced the devm_add_action_or_reset() call,\nfixed an issue during probe, that happens due to other errors in\ndwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without\ndisabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL.\n\nRather fix the error path: disable all the low level hardware in the\nerror path, by using the \"hsotg->ll_hw_enabled\" flag. Checking dr_mode\nhas been introduced to avoid a dual call to dwc2_lowlevel_hw_disable().\n\"ll_hw_enabled\" should achieve the same (and is used currently in the\nremove() routine)." |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/usb/dwc2/platform.c" |
| ], |
| "versions": [ |
| { |
| "version": "33a06f1300a79cfd461cea0268f05e969d4f34ec", |
| "lessThan": "1f01027c51eb16145e8e07fafea3ca07ef102d06", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "33a06f1300a79cfd461cea0268f05e969d4f34ec", |
| "lessThan": "cba76e1fb896b573f09f51aa299223276a77bc90", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "33a06f1300a79cfd461cea0268f05e969d4f34ec", |
| "lessThan": "ffb8ab6f87bd28d700ab5c20d9d3a7e75067630d", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "33a06f1300a79cfd461cea0268f05e969d4f34ec", |
| "lessThan": "6485fc381b6528b6f547ee1ff10bdbcbe31a6e4c", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "33a06f1300a79cfd461cea0268f05e969d4f34ec", |
| "lessThan": "f747313249b74f323ddf841a9c8db14d989f296a", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "c95e1f67b9a84479d1a6d2e9b123a1553af2a75e", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "7d2a4749e1589295c69183f7d79d5b62664b34d6", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "8a8841b9f3eb1f46e3fc6d56a9b9299c53f4f86f", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "fa7fd9ba18533e9aa5f718a06de3deb522a4b587", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "b2c2b88b049684b89776036f9a03fcc2d1bb3c22", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "e7c4b79d70a70b4b7b0a04c640238a2ef0a7a8c8", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "88dcd13872b11bd60e6d4cb6317821e1d367e524", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/usb/dwc2/platform.c" |
| ], |
| "versions": [ |
| { |
| "version": "5.9", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "5.9", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.10.177", |
| "lessThanOrEqual": "5.10.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.15.105", |
| "lessThanOrEqual": "5.15.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.22", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.2.9", |
| "lessThanOrEqual": "6.2.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.3", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.9", |
| "versionEndExcluding": "5.10.177" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.9", |
| "versionEndExcluding": "5.15.105" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.9", |
| "versionEndExcluding": "6.1.22" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.9", |
| "versionEndExcluding": "6.2.9" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.9", |
| "versionEndExcluding": "6.3" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.4.233" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.9.233" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.14.194" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.19.140" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.4.59" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.7.16" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.8.2" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/1f01027c51eb16145e8e07fafea3ca07ef102d06" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/cba76e1fb896b573f09f51aa299223276a77bc90" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/ffb8ab6f87bd28d700ab5c20d9d3a7e75067630d" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/6485fc381b6528b6f547ee1ff10bdbcbe31a6e4c" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/f747313249b74f323ddf841a9c8db14d989f296a" |
| } |
| ], |
| "title": "usb: dwc2: fix a devres leak in hw_enable upon suspend resume", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2023-53054", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
