| From bippy-1.1.0 Mon Sep 17 00:00:00 2001 |
| From: Greg Kroah-Hartman <gregkh@kernel.org> |
| To: <linux-cve-announce@vger.kernel.org> |
| Reply-to: <cve@kernel.org>, <linux-kernel@vger.kernel.org> |
| Subject: CVE-2023-53054: usb: dwc2: fix a devres leak in hw_enable upon suspend resume |
| |
| Description |
| =========== |
| |
| In the Linux kernel, the following vulnerability has been resolved: |
| |
| usb: dwc2: fix a devres leak in hw_enable upon suspend resume |
| |
| Each time the platform goes to low power, PM suspend / resume routines |
| call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). |
| This adds a new devres each time. |
| This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be |
| called from udc_start(). |
| |
| This can be seen with tracing: |
| - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable |
| - go to low power |
| - cat /sys/kernel/debug/tracing/trace |
| |
| A new "ADD" entry is found upon each low power cycle: |
| ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) |
| ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) |
| ... |
| |
| A second issue is addressed here: |
| - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). |
| - regulator_bulk_disable() never gets called. |
| |
| So the reference count for these regulators constantly increase, by one |
| upon each low power cycle, due to missing regulator_bulk_disable() call |
| in __dwc2_lowlevel_hw_disable(). |
| |
| The original fix that introduced the devm_add_action_or_reset() call, |
| fixed an issue during probe, that happens due to other errors in |
| dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without |
| disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. |
| |
| Rather fix the error path: disable all the low level hardware in the |
| error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode |
| has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). |
| "ll_hw_enabled" should achieve the same (and is used currently in the |
| remove() routine). |
| |
| The Linux kernel CVE team has assigned CVE-2023-53054 to this issue. |
| |
| |
| Affected and fixed versions |
| =========================== |
| |
| Issue introduced in 5.9 with commit 33a06f1300a79cfd461cea0268f05e969d4f34ec and fixed in 5.10.177 with commit 1f01027c51eb16145e8e07fafea3ca07ef102d06 |
| Issue introduced in 5.9 with commit 33a06f1300a79cfd461cea0268f05e969d4f34ec and fixed in 5.15.105 with commit cba76e1fb896b573f09f51aa299223276a77bc90 |
| Issue introduced in 5.9 with commit 33a06f1300a79cfd461cea0268f05e969d4f34ec and fixed in 6.1.22 with commit ffb8ab6f87bd28d700ab5c20d9d3a7e75067630d |
| Issue introduced in 5.9 with commit 33a06f1300a79cfd461cea0268f05e969d4f34ec and fixed in 6.2.9 with commit 6485fc381b6528b6f547ee1ff10bdbcbe31a6e4c |
| Issue introduced in 5.9 with commit 33a06f1300a79cfd461cea0268f05e969d4f34ec and fixed in 6.3 with commit f747313249b74f323ddf841a9c8db14d989f296a |
| Issue introduced in 4.4.233 with commit c95e1f67b9a84479d1a6d2e9b123a1553af2a75e |
| Issue introduced in 4.9.233 with commit 7d2a4749e1589295c69183f7d79d5b62664b34d6 |
| Issue introduced in 4.14.194 with commit 8a8841b9f3eb1f46e3fc6d56a9b9299c53f4f86f |
| Issue introduced in 4.19.140 with commit fa7fd9ba18533e9aa5f718a06de3deb522a4b587 |
| Issue introduced in 5.4.59 with commit b2c2b88b049684b89776036f9a03fcc2d1bb3c22 |
| Issue introduced in 5.7.16 with commit e7c4b79d70a70b4b7b0a04c640238a2ef0a7a8c8 |
| Issue introduced in 5.8.2 with commit 88dcd13872b11bd60e6d4cb6317821e1d367e524 |
| |
| Please see https://www.kernel.org for a full list of currently supported |
| kernel versions by the kernel community. |
| |
| Unaffected versions might change over time as fixes are backported to |
| older supported kernel versions. The official CVE entry at |
| https://cve.org/CVERecord/?id=CVE-2023-53054 |
| will be updated if fixes are backported, please check that for the most |
| up to date information about this issue. |
| |
| |
| Affected files |
| ============== |
| |
| The file(s) affected by this issue are: |
| drivers/usb/dwc2/platform.c |
| |
| |
| Mitigation |
| ========== |
| |
| The Linux kernel CVE team recommends that you update to the latest |
| stable kernel version for this, and many other bugfixes. Individual |
| changes are never tested alone, but rather are part of a larger kernel |
| release. Cherry-picking individual commits is not recommended or |
| supported by the Linux kernel community at all. If however, updating to |
| the latest release is impossible, the individual changes to resolve this |
| issue can be found at these commits: |
| https://git.kernel.org/stable/c/1f01027c51eb16145e8e07fafea3ca07ef102d06 |
| https://git.kernel.org/stable/c/cba76e1fb896b573f09f51aa299223276a77bc90 |
| https://git.kernel.org/stable/c/ffb8ab6f87bd28d700ab5c20d9d3a7e75067630d |
| https://git.kernel.org/stable/c/6485fc381b6528b6f547ee1ff10bdbcbe31a6e4c |
| https://git.kernel.org/stable/c/f747313249b74f323ddf841a9c8db14d989f296a |