| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nPCI/PM: Drain runtime-idle callbacks before driver removal\n\nA race condition between the .runtime_idle() callback and the .remove()\ncallback in the rtsx_pcr PCI driver leads to a kernel crash due to an\nunhandled page fault [1].\n\nThe problem is that rtsx_pci_runtime_idle() is not expected to be running\nafter pm_runtime_get_sync() has been called, but the latter doesn't really\nguarantee that. It only guarantees that the suspend and resume callbacks\nwill not be running when it returns.\n\nHowever, if a .runtime_idle() callback is already running when\npm_runtime_get_sync() is called, the latter will notice that the runtime PM\nstatus of the device is RPM_ACTIVE and it will return right away without\nwaiting for the former to complete. In fact, it cannot wait for\n.runtime_idle() to complete because it may be called from that callback (it\narguably does not make much sense to do that, but it is not strictly\nprohibited).\n\nThus in general, whoever is providing a .runtime_idle() callback needs\nto protect it from running in parallel with whatever code runs after\npm_runtime_get_sync(). [Note that .runtime_idle() will not start after\npm_runtime_get_sync() has returned, but it may continue running then if it\nhas started earlier.]\n\nOne way to address that race condition is to call pm_runtime_barrier()\nafter pm_runtime_get_sync() (not before it, because a nonzero value of the\nruntime PM usage counter is necessary to prevent runtime PM callbacks from\nbeing invoked) to wait for the .runtime_idle() callback to complete should\nit be running at that point. A suitable place for doing that is in\npci_device_remove() which calls pm_runtime_get_sync() before removing the\ndriver, so it may as well call pm_runtime_barrier() subsequently, which\nwill prevent the race in question from occurring, not just in the rtsx_pcr\ndriver, but in any PCI drivers providing .runtime_idle() callbacks." |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/pci/pci-driver.c" |
| ], |
| "versions": [ |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "9a87375bb586515c0af63d5dcdcd58ec4acf20a6", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "47d8aafcfe313511a98f165a54d0adceb34e54b1", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "bbe068b24409ef740657215605284fc7cdddd491", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "7cc94dd36e48879e76ae7a8daea4ff322b7d9674", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "900b81caf00c89417172afe0e7e49ac4eb110f4b", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "d86ad8c3e152349454b82f37007ff6ba45f26989", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "d534198311c345e4b062c4b88bb609efb8bd91d5", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "6347348c6aba52dda0b33296684cbb627bdc6970", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "9d5286d4e7f68beab450deddbb6a32edd5ecf4bf", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/pci/pci-driver.c" |
| ], |
| "versions": [ |
| { |
| "version": "4.19.312", |
| "lessThanOrEqual": "4.19.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.4.274", |
| "lessThanOrEqual": "5.4.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.10.215", |
| "lessThanOrEqual": "5.10.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.15.154", |
| "lessThanOrEqual": "5.15.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.84", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.24", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.7.12", |
| "lessThanOrEqual": "6.7.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.8.3", |
| "lessThanOrEqual": "6.8.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.9", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "4.19.312" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.4.274" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.10.215" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.15.154" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.1.84" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.6.24" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.7.12" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.8.3" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.9" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/9a87375bb586515c0af63d5dcdcd58ec4acf20a6" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/47d8aafcfe313511a98f165a54d0adceb34e54b1" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/bbe068b24409ef740657215605284fc7cdddd491" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/7cc94dd36e48879e76ae7a8daea4ff322b7d9674" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/900b81caf00c89417172afe0e7e49ac4eb110f4b" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/d86ad8c3e152349454b82f37007ff6ba45f26989" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/d534198311c345e4b062c4b88bb609efb8bd91d5" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/6347348c6aba52dda0b33296684cbb627bdc6970" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/9d5286d4e7f68beab450deddbb6a32edd5ecf4bf" |
| } |
| ], |
| "title": "PCI/PM: Drain runtime-idle callbacks before driver removal", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2024-35809", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
