| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nx86/fpu: Ensure shadow stack is active before \"getting\" registers\n\nThe x86 shadow stack support has its own set of registers. Those registers\nare XSAVE-managed, but they are \"supervisor state components\" which means\nthat userspace can not touch them with XSAVE/XRSTOR. It also means that\nthey are not accessible from the existing ptrace ABI for XSAVE state.\nThus, there is a new ptrace get/set interface for it.\n\nThe regset code that ptrace uses provides an ->active() handler in\naddition to the get/set ones. For shadow stack this ->active() handler\nverifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the\nthread struct. The ->active() handler is checked from some call sites of\nthe regset get/set handlers, but not the ptrace ones. This was not\nunderstood when shadow stack support was put in place.\n\nAs a result, both the set/get handlers can be called with\nXFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to\nreturn NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an\nssp_active() check to avoid surprising the kernel with shadow stack\nbehavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That\ncheck just happened to avoid the warning.\n\nBut the ->get() side wasn't so lucky. It can be called with shadow stacks\ndisabled, triggering the warning in practice, as reported by Christina\nSchimpe:\n\nWARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0\n[...]\nCall Trace:\n<TASK>\n? show_regs+0x6e/0x80\n? ssp_get+0x89/0xa0\n? __warn+0x91/0x150\n? ssp_get+0x89/0xa0\n? report_bug+0x19d/0x1b0\n? handle_bug+0x46/0x80\n? exc_invalid_op+0x1d/0x80\n? asm_exc_invalid_op+0x1f/0x30\n? __pfx_ssp_get+0x10/0x10\n? ssp_get+0x89/0xa0\n? ssp_get+0x52/0xa0\n__regset_get+0xad/0xf0\ncopy_regset_to_user+0x52/0xc0\nptrace_regset+0x119/0x140\nptrace_request+0x13c/0x850\n? wait_task_inactive+0x142/0x1d0\n? do_syscall_64+0x6d/0x90\narch_ptrace+0x102/0x300\n[...]\n\nEnsure that shadow stacks are active in a thread before looking them up\nin the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are\nset at the same time, the active check ensures that there will be\nsomething to find in the XSAVE buffer.\n\n[ dhansen: changelog/subject tweaks ]" |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "arch/x86/kernel/fpu/regset.c" |
| ], |
| "versions": [ |
| { |
| "version": "2fab02b25ae7cf5f714ab456b03d9a3fe5ae98c9", |
| "lessThan": "0a3a872214188e4268d31581ed0cd44508e038cf", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "2fab02b25ae7cf5f714ab456b03d9a3fe5ae98c9", |
| "lessThan": "6bfe1fc22f462bec87422cdcbec4d7a2f43ff01d", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "2fab02b25ae7cf5f714ab456b03d9a3fe5ae98c9", |
| "lessThan": "a9d9c33132d49329ada647e4514d210d15e31d81", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "arch/x86/kernel/fpu/regset.c" |
| ], |
| "versions": [ |
| { |
| "version": "6.6", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "6.6", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.72", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.12.10", |
| "lessThanOrEqual": "6.12.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.13", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.6", |
| "versionEndExcluding": "6.6.72" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.6", |
| "versionEndExcluding": "6.12.10" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.6", |
| "versionEndExcluding": "6.13" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/0a3a872214188e4268d31581ed0cd44508e038cf" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/6bfe1fc22f462bec87422cdcbec4d7a2f43ff01d" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/a9d9c33132d49329ada647e4514d210d15e31d81" |
| } |
| ], |
| "title": "x86/fpu: Ensure shadow stack is active before \"getting\" registers", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2025-21632", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
