| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nipvlan: ensure network headers are in skb linear part\n\nsyzbot found that ipvlan_process_v6_outbound() was assuming\nthe IPv6 network header isis present in skb->head [1]\n\nAdd the needed pskb_network_may_pull() calls for both\nIPv4 and IPv6 handlers.\n\n[1]\nBUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47\n __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47\n ipv6_addr_type include/net/ipv6.h:555 [inline]\n ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline]\n ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651\n ip6_route_output include/net/ip6_route.h:93 [inline]\n ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476\n ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline]\n ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline]\n ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline]\n ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671\n ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223\n __netdev_start_xmit include/linux/netdevice.h:5150 [inline]\n netdev_start_xmit include/linux/netdevice.h:5159 [inline]\n xmit_one net/core/dev.c:3735 [inline]\n dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751\n sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343\n qdisc_restart net/sched/sch_generic.c:408 [inline]\n __qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416\n qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127\n net_tx_action+0x78b/0x940 net/core/dev.c:5484\n handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561\n __do_softirq+0x14/0x1a kernel/softirq.c:595\n do_softirq+0x9a/0x100 kernel/softirq.c:462\n __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389\n local_bh_enable include/linux/bottom_half.h:33 [inline]\n rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]\n __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611\n dev_queue_xmit include/linux/netdevice.h:3311 [inline]\n packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276\n packet_snd net/packet/af_packet.c:3132 [inline]\n packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164\n sock_sendmsg_nosec net/socket.c:718 [inline]" |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/ipvlan/ipvlan_core.c" |
| ], |
| "versions": [ |
| { |
| "version": "2ad7bf3638411cb547f2823df08166c13ab04269", |
| "lessThan": "5b8dea8d1612dc7151d2457d7d2e6a69820309bf", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "2ad7bf3638411cb547f2823df08166c13ab04269", |
| "lessThan": "4ec48f812804f370f622e0874e6dd8fcc58241cd", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "2ad7bf3638411cb547f2823df08166c13ab04269", |
| "lessThan": "5353fd89663c48f56bdff975c562cfe78b1a2e4c", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "2ad7bf3638411cb547f2823df08166c13ab04269", |
| "lessThan": "e2a4f76a2d8a44816ecd25bcbdb47b786d621974", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "2ad7bf3638411cb547f2823df08166c13ab04269", |
| "lessThan": "27843ce6ba3d3122b65066550fe33fb8839f8aef", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/net/ipvlan/ipvlan_core.c" |
| ], |
| "versions": [ |
| { |
| "version": "3.19", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "3.19", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.130", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.81", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.12.18", |
| "lessThanOrEqual": "6.12.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.13.6", |
| "lessThanOrEqual": "6.13.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.14", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "3.19", |
| "versionEndExcluding": "6.1.130" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "3.19", |
| "versionEndExcluding": "6.6.81" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "3.19", |
| "versionEndExcluding": "6.12.18" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "3.19", |
| "versionEndExcluding": "6.13.6" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "3.19", |
| "versionEndExcluding": "6.14" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/5b8dea8d1612dc7151d2457d7d2e6a69820309bf" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/4ec48f812804f370f622e0874e6dd8fcc58241cd" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/5353fd89663c48f56bdff975c562cfe78b1a2e4c" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/e2a4f76a2d8a44816ecd25bcbdb47b786d621974" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/27843ce6ba3d3122b65066550fe33fb8839f8aef" |
| } |
| ], |
| "title": "ipvlan: ensure network headers are in skb linear part", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2025-21891", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
