| ver 3.6: |
| Fix issue with handling blacklisting and roaming requests. |
| Fix issue with handling CQM thresholds for FullMAC devices. |
| Add support for PMKSA when using FullMAC devices. |
| |
| ver 3.5: |
| Add support for option to disable blacklist handling. |
| Add support for option to disable SAE for broken drivers. |
| |
| ver 3.4: |
| Add support for the Test Anything Protocol. |
| |
| ver 3.3: |
| Fix issue with handling External Authentication. |
| |
| ver 3.2: |
| Fix issue with GCC 15 and -std=c23 build errors. |
| Add support for using PMKSA over SAE if available. |
| Add support for HighUtilization/StationCount thresholds. |
| Add support for disabling Multicast RX option. |
| |
| ver 3.1: |
| Fix issue with handling OWE transition BSS selection. |
| Fix issue with handling oper class 136 starting frequency. |
| |
| ver 3.0: |
| Fix issue with handling alpha2 code for United Kingdom. |
| Fix issue with handling empty TX/RX bitrate attributes. |
| Fix issue with handling RSSI polling fallback workaround. |
| Fix issue with handling harmless cloned information elements. |
| Add experimental support for External Authentication feature. |
| |
| ver 2.22: |
| Fix issue with handling the Affinities property. |
| Fix issue with handling ConnectedAccessPoint signal when roaming. |
| |
| ver 2.21: |
| Fix issue with pending scan requests after regdom update. |
| Fix issue with handling the rearming of the roaming timeout. |
| Fix issue with survey request and externally triggered scans. |
| Fix issue with RSSI fallback when setting CQM threshold fails. |
| Fix issue with FT-over-Air without offchannel support. |
| Add support for per station Affinities property. |
| |
| ver 2.20: |
| Fix issue with PKEX timeout and number of frequencies used. |
| Fix issue with handling logic for handshake failures. |
| Fix issue with handling ConnectedAccessPoint signal. |
| |
| ver 2.19: |
| Fix issue with handling flush flag for external scans. |
| Fix issue with handling SNR calculation in ranking. |
| |
| ver 2.18: |
| Fix issue with handling BSS with invalid HE capabilities. |
| Fix issue with neighbor reports with invalid country codes. |
| Fix issue with EAP-TTLS Start packets with L flag set. |
| Add support for enabling SAE for AP mode operation. |
| |
| ver 2.17: |
| Fix issue with handling deauthenticate on disconnect. |
| Fix issue with handling of rate estimation errors. |
| Fix issue with handling EAPOL frame listeners. |
| |
| ver 2.16: |
| Fix issue with uninitialized variable and DPP encrypt. |
| Fix issue with Access Point mode and ATTR_MAC validation. |
| Fix issue with Access Point mode and frequency attributes. |
| Fix issue with P2P and handling client info description. |
| Fix issue with P2P and handling parsing of service info. |
| Fix issue with netconfig and handling domain list. |
| Add support for forcing a default ECC group. |
| |
| ver 2.15: |
| Fix issue with notice events for connection timeouts. |
| Fix issue with reason code and deauthenticate event. |
| Fix issue with handling basename() functionality. |
| |
| ver 2.14: |
| Fix issue with accepting PTK 4/4 after receiving PTK 2/4. |
| Fix issue with frequency limit for quick scans. |
| Fix issue with limiting DHCPv4 attempts. |
| |
| ver 2.13: |
| Fix issue with handling netconfig and roaming conditions. |
| Fix issue with logging requirement for CMD_EXTERNAL_AUTH. |
| Fix issue with using OpenSSL 3.2 installations. |
| |
| ver 2.12: |
| Fix issue with DPP extra settings not being used. |
| Fix issue with DPP and PRF+ handling on AARCH64. |
| Add support for SAE password identifiers. |
| |
| ver 2.11: |
| Fix issue with handling iovecs with multiple IEs. |
| Fix issue with handling SAE password identifiers. |
| Fix issue with handling agent release method call. |
| |
| ver 2.10: |
| Fix issue with buffer overflow for 32 byte SSIDs. |
| Fix issue with deauthentication before FT work completes. |
| Fix issue with power save disabling procedure. |
| |
| ver 2.9: |
| Fix issue with handling certain FT failures. |
| Fix issue with handling user-disabled bands. |
| Fix issue with handling roam on beacon loss event. |
| Add support for PKEX configurator. |
| Add support for PKEX enrollee. |
| |
| ver 2.8: |
| Fix issue with handling OWE AKM in association reply. |
| |
| ver 2.7: |
| Fix issue with handling FT-8021X and SHA256 PMKID derivation. |
| |
| ver 2.6: |
| Add support for setting driver specific quirks. |
| Add support for disabling power saving mode. |
| |
| ver 2.5: |
| Fix issue with HT40+/- checks when creating chandef. |
| Fix issue with handling support for FT-8021X-SHA384. |
| Fix issue with handling secure bit check in handshake 1/4. |
| Fix issue with allowing roaming before netconfig finishes. |
| Fix issue with double free when disconnecting during FT. |
| |
| ver 2.4: |
| Fix issue with FT-over-Air and same channel operation. |
| Fix issue with AP mode and missing support for GTK. |
| Fix issue with AP mode and channel switch event. |
| Fix issue with SSID string conversion handling. |
| |
| ver 2.3: |
| Fix issue with length calculation for WMM IE. |
| Fix issue with channel number allocation off-by-one. |
| Fix issue with cached session when TLS phase2 fails. |
| Add support for FastReauthentication setting for EAP-TLS. |
| |
| ver 2.2: |
| Fix issue with handling FT and multiple roaming scans. |
| Fix issue with handling multiple wiphy registrations. |
| Fix issue with with EAP-PEAP session resumption. |
| Add support for using PTK rekeying in AP mode. |
| Add support for setting country IE in AP mode. |
| Add support for setting WMM parameter IE in AP mode. |
| |
| ver 2.1: |
| Fix issue with handling FT-over-DS action. |
| Fix issue with handling scan and 6 GHz support check. |
| Fix issue with handling when periodic scans get aborted. |
| Add support for using 5 GHz frequencies in AP mode. |
| |
| ver 2.0: |
| Fix issue with handling P2P and limiting ciphers to CCMP. |
| Fix issue with scanning before forced roaming action. |
| Fix issue with provided scan frequencies from RRM. |
| Fix issue with handling Michael MIC failure message. |
| Fix issue with handling timestamp size in MPDU frames. |
| Fix issue with handling enablement of OCVC for FT AKMs. |
| Fix issue with handling FT work as highest priority. |
| Fix issue with handling roaming events and Multi-BSS. |
| Add support for utilizing roaming candidates list. |
| Add support for utilizing TLS session caching. |
| Add support for ciphers with 256 bits key size. |
| Add support for Access Point mode with legacy TKIP. |
| Add support for MAC address changes while powered. |
| Add support for IPv4 and IPv6 network configuration. |
| |
| ver 1.30: |
| Fix issue with handling OWE if buggy AP is detected. |
| Fix issue with handling quick scan and enabling 6GHz. |
| Fix issue with handling tags for extended IEs. |
| Add support for handling HE capabilities. |
| Add support for handling regulatory domain changes. |
| Add support for handling netdev packet loss events. |
| |
| ver 1.29: |
| Fix issue with handling EAP-Success message. |
| Fix issue with handling secure setting and EAPoL. |
| Add support for DeviceProvisioning API properties. |
| |
| ver 1.28: |
| Fix issue with handling invalid EAPoL frames. |
| Fix issue with handling unexpectedly unencrypted EAP frames. |
| Fix issue with handling AlwaysRandomizeAddress/AddressOverride. |
| Fix issue with handling initial signal level notification. |
| Fix issue with handling sorting of scan requests. |
| Fix issue with handling frame type check in FT. |
| |
| ver 1.27: |
| Fix issue with hidden networks on connection error. |
| Fix issue with directed roams if already trying to roam. |
| Fix issue with checking for connected in FT frame event. |
| |
| ver 1.26: |
| Fix issue with handling BSS that changed frequency. |
| Fix issue with handling frequencies in neighbor report. |
| Fix issue with operating classes for 802.11ax standard. |
| Fix issue with enforcing of MFPR for 6 GHz frequencies. |
| Add support for band defined in the WiFi 6E amendment. |
| Add support for scanning while in AP mode. |
| |
| ver 1.25: |
| Fix issue with handling abort of periodic scans. |
| Fix issue with handling connection when link goes down. |
| Fix issue with handling operating channel information. |
| Add support for encrypted network profile storage. |
| Add support for DPP initiating as a configurator. |
| |
| ver 1.24: |
| Fix issue with handshake and missing rekeying support. |
| Fix issue with BSS ranking and zero signal strength. |
| Fix issue with setting OWE IE length correctly. |
| |
| ver 1.23: |
| Fix issue with handling handshake offloading. |
| Fix issue with at_console and D-Bus policy. |
| |
| ver 1.22: |
| Fix issue with handling periodic scanning. |
| Fix issue with handling scanning completion. |
| Fix issue with handling scanning for OWE auto-connect. |
| Add support for additional DPP features. |
| |
| ver 1.21: |
| Fix issue with handling disconnect events issued by AP. |
| Add experimental support for DPP feature. |
| |
| ver 1.20: |
| Fix issue with handling Hotspot 2.0 requirements. |
| Add support for evict_nocarrier setting during roaming. |
| Add support for experimental NetworkConfigurationAgent API. |
| |
| ver 1.19: |
| Fix issue with handling OCV if offloading is supported. |
| Fix issue with handling SA Query on channel switch event. |
| Fix issue with starting FT-over-DS actions after roaming. |
| Add support for OWE transition networks. |
| Add support for extended key IDs. |
| |
| ver 1.18: |
| Fix issue with handling faulty SAE duplicate commits. |
| Add support for Access Point FILS IP Address Assignment IE. |
| Add support for P2P GO-side 4-way handshake IP allocation. |
| Add support for forcing SAE group 19 if BSS requires it. |
| |
| ver 1.17: |
| Fix issue with sending additional and vendor IEs. |
| Fix issue with IE ordering for 802.11-2020 support. |
| Fix issue with frequency update on channel switch events. |
| Fix issue with drivers and handling of IF_OPER_UP setting. |
| |
| ver 1.16: |
| Fix issue with writing provisioning files with a passphrase. |
| Add support for Authenticator & Supplicant RSN Extension elements. |
| Add support for handling Transition Disable info. |
| Add support for SAE Hash-to-Element feature. |
| |
| ver 1.15: |
| Add support for FT-over-DS procedure with multiple BSS. |
| Add support for estimation of VHT RX data rate. |
| Add support for exporting Daemon information. |
| |
| ver 1.14: |
| Fix issue with scanning property and quick scan cancellation. |
| Fix issue with handling authentication timeouts from SAE. |
| Fix issue with handling association timeouts and retries. |
| Fix issue with handling roaming frequencies after roaming. |
| Fix issue with requesting neighbor report after roaming. |
| Add support for handling PSK offload connections. |
| |
| ver 1.13: |
| Fix issue with EAPoL protocol version 2010 handling. |
| Fix issue with authenticator method logic handling. |
| Fix issue with getting scan results from firmware. |
| Add support for handling SAE offload connections. |
| Add support for roaming with FullMAC devices. |
| |
| ver 1.12: |
| Fix issue with handling retry roaming without higher RSSI. |
| Fix issue with WPA3, OWE and FILS authentication handling. |
| Fix issue with handling locally generated deauth frames. |
| Fix issue with quick scanning and connect interaction. |
| Add support for diagnostic D-Bus interfaces. |
| |
| ver 1.11: |
| Add support for ACD client for static configuration. |
| Add support for intelligent scan of all frequencies. |
| |
| ver 1.10: |
| Add support for DHCP v6 configuration. |
| Add support for DHCP server operation with AP mode. |
| Add support for IP allocation during the 4-Way Handshake. |
| Add support for P2P Group-owner handling. |
| |
| ver 1.9: |
| Fix issue with WPA3 connections in transition mode. |
| Fix issue with handling roaming attempt failures. |
| Add support for radio management work queue. |
| Add support P2P service manager interface. |
| Add support for WiFi Display client API. |
| |
| ver 1.8: |
| Fix issue with handling FT AKMs when not supported. |
| Fix issue with handling FILS and RSNE in authenticate. |
| Fix issue with handling auto-connection and quick scan. |
| Fix issue with sending multiple scan requests. |
| Add support for P2P feature and API. |
| |
| ver 1.7: |
| Fix issue with APs that send IGTK falsely in big endian. |
| Fix issue with setting linkmode & operstate for open networks. |
| |
| ver 1.6: |
| Fix issue with handling missing AP stop events. |
| Fix issue with handling out-of-order disconnect events. |
| Fix issue with handling missing auth/assoc support. |
| Fix issue with handling omitted EAP-TLS-CACert. |
| Fix issue with handling OWE PTK derivation. |
| Add support for internal frame exchange API. |
| Add support for MAC randomization and override. |
| Add support for per-network MAC addresses. |
| |
| ver 1.5: |
| Fix issue with handling missing NEW_WIPHY events. |
| Fix issue with interface creation and NEW_WIPHY events. |
| Fix issue with handling LastConnectedTime property change. |
| Fix issue with PEAPv0 interoperability with Windows. |
| |
| ver 1.4: |
| Fix issue with handling Crypto-Binding and invalid MACs. |
| Fix issue with handling change station error results. |
| Fix issue with handling DNS resolving installations. |
| |
| ver 1.3: |
| Fix issue with handling EAP-GTC and password requests. |
| Fix issue with handling Crypto-Binding TLV for PEAPv0. |
| Fix issue with handling key installation and PEAP Phase 2. |
| Fix issue with handling externally triggered scan requests. |
| Fix issue with handling RCPI calculation for RRM requests. |
| |
| ver 1.2: |
| Fix issue with handling scan requests while connecting. |
| Fix issue with handling scan duration for RRM requests. |
| Fix issue with handling parent TSF value for RRM requests. |
| |
| ver 1.1: |
| Fix issue with simple configuration support checks. |
| Fix issue with handling TLS tunnel and PEAPv0. |
| Add support for radio resource management. |
| |
| ver 1.0: |
| Add support for stable D-Bus interfaces. |
| Add support for network configuration documentation. |
| |
| ver 0.23: |
| Fix issue with strict certificate chain checks. |
| Fix issue with parsing RSNE_ADVANCE information. |
| Fix issue with parsing RSN information for WPA1. |
| Fix issue with logic error in scan frequency validation. |
| Fix issue with integer overflow and authentication frames. |
| Add support for installing various manual pages. |
| |
| ver 0.22: |
| Fix issue with hotplug and device capability detection. |
| Add support for IPv6 network configuration handling. |
| Add support for embedding certificates in profiles. |
| |
| ver 0.21: |
| Fix issue with cleartext ACK and tunneled EAP-Success. |
| Fix issue with setting bits in extended capabilities. |
| Fix issue with WPA-1 information element parsing. |
| Add support for handling QoS Map IE and frames. |
| Add support for STATE_DIRECTORY environment. |
| Add support for CONFIGURATION_DIRECTORY environment. |
| |
| ver 0.20: |
| Add support for adding Extended Capabilities bits. |
| Add support for ServerDomainMask configuration option. |
| |
| ver 0.19: |
| Add support for Hotspot 2.0 functionality. |
| Add support for FILS Fast Transition feature. |
| Add support for network configuration handling. |
| Add support for resolution services framework. |
| |
| ver 0.18: |
| Fix issue with handling stale scan results. |
| Fix issue with handling OWE group renegotiation. |
| Fix issue with handshake failures on FT-PSK. |
| Add support for FILS (Fast Initial Link Setup). |
| |
| ver 0.17: |
| Fix issue with handling association failure path. |
| Fix issue with handling checks for valid ECC point/scalar. |
| Fix issue with handling potential infinite loop and SAE. |
| Fix issue with handling randomization for passive scans. |
| Add support for randomization of SN for probe requests. |
| Add support for handling the FILS cipher suites. |
| Add support for ERP key caching feature. |
| |
| ver 0.16: |
| Add missing pkcs8.conf for module loading. |
| |
| ver 0.15: |
| Fix issue with handling RSSI thresholds. |
| Fix issue with handling abort for a connection. |
| Fix issue with stopping Access Point operation. |
| Add support for individual BSS blacklisting. |
| Add support for utilizing MAC randomization. |
| Add support for utilizing different key lengths. |
| Add support for 16, 24 and 32 byte MIC lengths. |
| Add support for handling driver rekying feature. |
| |
| ver 0.14: |
| Add support for tunneled MSCHAPv2 authentication. |
| |
| ver 0.13: |
| Fix issue with WSC interface runtime handling. |
| Add support for Opportunistic Wireless Encryption. |
| Add support for common EAP-TLS framework. |
| |
| ver 0.12: |
| Fix issue with handling 802.1x automatic connection. |
| Fix issue with handling missing support for backtrace. |
| |
| ver 0.11: |
| Fix issue with handling EAP-TTLS and redundant L flags. |
| Fix issue with handling EAP-TLS upper limit on request size. |
| Fix issue with handling handshake complete after setting keys. |
| Fix issue with handling access points with too many rates. |
| Fix issue with requiring PSK if passphrase is present. |
| Add support for retrieving list of hidden access points. |
| Add support for tunneled MS-CHAP. |
| |
| ver 0.10: |
| Fix issue with Ethernet authentication packet handling. |
| Fix issue with ad-hoc network scan results in station mode. |
| Fix issue with cancellation of ongoing rekey offload. |
| Add support for setting per-mac GTK credentials. |
| Add support for using external Embedded Linux library. |
| |
| ver 0.9: |
| Fix issue with handling EAP-WSC passwords. |
| Add support for TTLS-CHAP and TTLS-PAP. |
| Add support for handling FT over SAE. |
| |
| ver 0.8: |
| Fix issue with handling EAP_CACHE_NEVER secret types. |
| Fix issue with redundant usage of the L flag and PEAP. |
| Fix issue with EAP type 33 as termination mechanism for PEAPv1. |
| Add initial version of Ethernet authentication daemon. |
| Add support for Station mode interface. |
| |
| ver 0.7: |
| Fix issue with hard coded peer address and SAE networks. |
| Fix issue with raw passphrase requirement and SAE networks. |
| Fix issue with differentiating authenticator and supplicant. |
| Fix issue with timestamps comparison of known networks. |
| Fix issue with handling cancellation of power callbacks. |
| Fix issue with honoring auto-connect setting on power up. |
| Fix issue with crash during operstate callbacks. |
| |
| ver 0.6: |
| Fix issue with syncing the PSK on first connection. |
| Fix issue with unnecessary known object removal events. |
| |
| ver 0.5: |
| Fix issue with EAPoL handling and Ad-Hoc networks. |
| Add support for using agent with EAP-GTC methods. |
| Add support for improved Known Networks management. |
| Add support for Simultaneous Authentication of Equals. |
| Add support for exposing supported modes of operation. |
| Add support for D-Bus auto-activation via systemd. |
| |
| ver 0.4: |
| Fix issue with handling all zero PMKID. |
| Fix issue with handling PEAP servers and M bit requirement. |
| Fix issue with handling MS-CHAP v2 and uninitialized memory. |
| Fix issue with handling memory leak and aborting connections. |
| Fix issue with handling memory leak and PSK configuration. |
| Fix issue with handling not yet running D-Bus daemon. |
| Add support for advanced scanning of hidden networks. |
| Add support for MAC address randomization. |
| Add support for Ad-Hoc network interface. |
| Add support for Access Point interface. |
| |
| ver 0.3: |
| Fix issue with auto-connect settings for open networks. |
| Fix issue with handling beacon loss in roaming situations. |
| Fix issue with handling bridged wireless network interfaces. |
| Fix issue with handling EAP identity prompt or notification. |
| Fix issue with handling EAP state reset and reauthentication. |
| Add support for user specified hidden network connections. |
| Add support for configuring WDS / 4ADDR operation. |
| |
| ver 0.2: |
| Fix issue with unsupported bands from roam scan frequency set. |
| Fix issue with handling disconnect by AP and by SME events. |
| Fix issue with string start calculation for MS-CHAP v2. |
| Add workaround for 0 oper class in neighbor report. |
| Add support for EAPoL over NL80211 kernel feature. |
| Add support for EAP-PWD authentication method. |
| Add support for EAP-GTC authentication method. |
| Add support for agent functionality to client. |
| |
| ver 0.1: |
| Initial public release. |
