| #!/bin/bash |
| |
| PS4='$LINENO:' |
| CRYPTSETUP=../cryptsetup |
| |
| CRYPTSETUP_VALGRIND=../.libs/cryptsetup |
| CRYPTSETUP_LIB_VALGRIND=../.libs |
| |
| DEV_NAME=dummy |
| DEV_NAME2=dummy2 |
| DEV_NAME3=dummy3 |
| ORIG_IMG=luks-test-orig |
| IMG=luks-test |
| IMG10=luks-test-v10 |
| HEADER_IMG=luks-header |
| HEADER_KEYU=luks2_keyslot_unassigned.img |
| HEADER_LUKS2_PV=blkid-luks2-pv.img |
| KEY1=key1 |
| KEY2=key2 |
| KEY5=key5 |
| KEYE=keye |
| PWD0="compatkey" |
| PWD1="93R4P4pIqAH8" |
| PWD2="mymJeD8ivEhE" |
| PWD3="ocMakf3fAcQO" |
| PWDW="rUkL4RUryBom" |
| TEST_KEYRING_NAME="compattest2_keyring" |
| TEST_TOKEN0="compattest2_desc0" |
| TEST_TOKEN1="compattest2_desc1" |
| VK_FILE="compattest2_vkfile" |
| IMPORT_TOKEN="{\"type\":\"some_type\",\"keyslots\":[],\"base64_data\":\"zxI7vKB1Qwl4VPB4D-N-OgcC14hPCG0IDu8O7eCqaQ\"}" |
| TOKEN_FILE0=test-token-file0 |
| TOKEN_FILE1=test-token-file1 |
| |
| FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000" |
| |
| TEST_UUID="12345678-1234-1234-1234-123456789abc" |
| |
| LOOPDEV=$(losetup -f 2>/dev/null) |
| [ -f /etc/system-fips ] && FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null) |
| |
| LOCK_DIR=$(grep DEFAULT_LUKS2_LOCK_PATH ../config.h | cut -d\" -f 2) |
| HAVE_KEYRING=$(grep -e "#define KERNEL_KEYRING" ../config.h) |
| test -n "$HAVE_KEYRING" || HAVE_KEYRING=0 |
| HAVE_KEYRING=${HAVE_KEYRING: -1} |
| |
| function remove_mapping() |
| { |
| [ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove $DEV_NAME3 |
| [ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove $DEV_NAME2 |
| [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME |
| losetup -d $LOOPDEV >/dev/null 2>&1 |
| rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $HEADER_KEYU $VK_FILE $HEADER_LUKS2_PV missing-file $TOKEN_FILE0 $TOKEN_FILE1 >/dev/null 2>&1 |
| |
| # unlink whole test keyring |
| [ -n "$TEST_KEYRING" ] && keyctl unlink $TEST_KEYRING "@u" >/dev/null |
| unset TEST_KEYRING |
| } |
| |
| function force_uevent() |
| { |
| DNAME=$(echo $LOOPDEV | cut -f3 -d /) |
| echo "change" >/sys/block/$DNAME/uevent |
| } |
| |
| function fail() |
| { |
| [ -n "$1" ] && echo "$1" |
| remove_mapping |
| echo "FAILED at line $(caller)" |
| exit 2 |
| } |
| |
| function fips_mode() |
| { |
| [ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ] |
| } |
| |
| function can_fail_fips() |
| { |
| # Ignore this fail if running in FIPS mode |
| fips_mode || fail $1 |
| } |
| |
| function skip() |
| { |
| [ -n "$1" ] && echo "$1" |
| remove_mapping |
| exit 77 |
| } |
| |
| function prepare() |
| { |
| [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME |
| |
| case "$2" in |
| wipe) |
| remove_mapping |
| dd if=/dev/zero of=$IMG bs=4096 count=5000 >/dev/null 2>&1 |
| sync |
| losetup $LOOPDEV $IMG |
| ;; |
| new) |
| remove_mapping |
| xz -cd compatimage.img.xz > $IMG |
| xz -dk $HEADER_KEYU.xz |
| # FIXME: switch to internal loop (no losetup at all) |
| echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \ |
| grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped." |
| losetup $LOOPDEV $IMG |
| xz -cd compatv10image.img.xz > $IMG10 |
| ;; |
| reuse | *) |
| if [ ! -e $IMG ]; then |
| xz -cd compatimage.img.xz > $IMG |
| losetup $LOOPDEV $IMG |
| fi |
| [ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10 |
| ;; |
| esac |
| |
| if [ ! -e $KEY1 ]; then |
| #dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1 |
| echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1 |
| echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1 |
| fi |
| |
| if [ ! -e $KEY2 ]; then |
| dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1 |
| fi |
| |
| if [ ! -e $KEY5 ]; then |
| dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1 |
| fi |
| |
| if [ ! -e $KEYE ]; then |
| touch $KEYE |
| fi |
| |
| cp $IMG $ORIG_IMG |
| [ -n "$1" ] && echo "CASE: $1" |
| } |
| |
| function check_exists() |
| { |
| [ -b /dev/mapper/$DEV_NAME ] || fail |
| } |
| |
| function valgrind_setup() |
| { |
| which valgrind >/dev/null 2>&1 || fail "Cannot find valgrind." |
| [ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable." |
| export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH" |
| } |
| |
| function valgrind_run() |
| { |
| INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@" |
| } |
| |
| function dm_crypt_keyring_support() |
| { |
| VER_STR=$(dmsetup targets | grep crypt | cut -f2 -dv) |
| [ -z "$VER_STR" ] && fail "Failed to parse dm-crypt version." |
| |
| VER_MAJ=$(echo $VER_STR | cut -f 1 -d.) |
| VER_MIN=$(echo $VER_STR | cut -f 2 -d.) |
| VER_PTC=$(echo $VER_STR | cut -f 3 -d.) |
| |
| [ $VER_MAJ -gt 1 ] && return 0 |
| [ $VER_MAJ -eq 1 -a $VER_MIN -gt 18 ] && return 0 |
| [ $VER_MAJ -eq 1 -a $VER_MIN -eq 18 -a $VER_PTC -ge 1 ] && return 0 |
| return 1 |
| } |
| |
| function dm_crypt_keyring_flawed() |
| { |
| dm_crypt_keyring_support && return 1; |
| |
| [ $VER_MAJ -gt 1 ] && return 0 |
| [ $VER_MAJ -eq 1 -a $VER_MIN -ge 15 ] && return 0 |
| return 1 |
| } |
| |
| function test_and_prepare_keyring() { |
| which keyctl > /dev/null 2>&1 || skip "Cannot find keyctl, test skipped" |
| keyctl list "@s" > /dev/null || skip "Current session keyring is unreachable, test skipped" |
| TEST_KEYRING=$(keyctl newring $TEST_KEYRING_NAME "@u" 2> /dev/null) |
| test -n "$TEST_KEYRING" || skip "Failed to create keyring in user keyring" |
| keyctl search "@s" keyring "$TEST_KEYRING" > /dev/null 2>&1 || keyctl link "@u" "@s" > /dev/null 2>&1 |
| load_key user test_key test_data "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped." |
| } |
| |
| # $1 type |
| # $2 description |
| # $3 payload |
| # $4 keyring |
| function load_key() |
| { |
| keyctl add $@ >/dev/null |
| } |
| |
| export LANG=C |
| |
| [ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run |
| |
| [ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped." |
| [ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped." |
| [ -d "$LOCK_DIR" ] || skip "WARNING: LUKS2 locking directory ($LOCK_DIR) is missing, test skipped." |
| |
| prepare "[2] Sector size and old payload alignment" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 511 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 256 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 8192 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 512 || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --align-payload 5 || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 512 --align-payload 5 || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32 || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32768 || fail |
| $CRYPTSETUP -q luksDump $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 --align-payload 32768 || fail |
| $CRYPTSETUP -q luksDump $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail |
| |
| prepare "[3] format" new |
| echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail |
| prepare "[4] format using hash sha512" wipe |
| echo $PWD1 | $CRYPTSETUP $FAST_PBKDF_OPT -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail |
| |
| prepare "[5] open" |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail |
| echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail |
| [ $? -ne 2 ] && fail "luksOpen should return EPERM exit code" |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| check_exists |
| |
| # Key Slot 1 and key material section 1 must change, the rest must not. |
| prepare "[6] add key" |
| echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT || fail |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| # Unsuccessful Key Delete - nothing may change |
| prepare "[7] unsuccessful delete" |
| echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail |
| [ $? -ne 2 ] && fail "luksKillSlot should return EPERM exit code" |
| #FIXME |
| #$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail |
| #$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail |
| |
| # Delete Key Test |
| # Key Slot 1 and key material section 1 must change, the rest must not |
| prepare "[8] successful delete" |
| $CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail |
| [ $? -ne 2 ] && fail "luksOpen should return EPERM exit code" |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| # Key Slot 1 and key material section 1 must change, the rest must not |
| prepare "[9] add key test for key files" |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| # Key Slot 1 and key material section 1 must change, the rest must not |
| prepare "[10] delete key test with key1 as remaining key" |
| $CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail |
| |
| # Delete last slot |
| prepare "[11] delete last key" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail |
| echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| |
| # Format test for ESSIV, and some other parameters. |
| prepare "[12] parameter variation test" wipe |
| $CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| prepare "[13] open/close - stacked devices" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 /dev/mapper/$DEV_NAME $FAST_PBKDF_OPT || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME2 || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[14] format/open - passphrase on stdin & new line" wipe |
| # stdin defined by "-" must take even newline |
| #echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks2 $LOOPDEV || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| # now also try --key-file |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV --key-file=- || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # process newline if from stdin |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV || fail |
| echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[15] UUID - use and report provided UUID" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid blah --type luks2 $LOOPDEV 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV || fail |
| tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) |
| [ "$tst"x = "$TEST_UUID"x ] || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail |
| $CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail |
| tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) |
| [ "$tst"x = "$TEST_UUID"x ] || fail |
| |
| prepare "[16] luksFormat" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --master-key-file /dev/urandom --type luks2 $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --master-key-file /dev/urandom --type luks2 $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --master-key-file /dev/urandom -s 256 --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # open by UUID |
| force_uevent # some systems do not update loop by-uuid |
| $CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # empty keyfile |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEYE || fail |
| $CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # open by volume key |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -s 256 --master-key-file $KEY1 --type luks2 $LOOPDEV || fail |
| $CRYPTSETUP luksOpen --master-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksOpen --master-key-file $KEY1 $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[17] AddKey volume key, passphrase and keyfile" wipe |
| # masterkey |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --master-key-file /dev/zero --key-slot 3 || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail |
| echo $PWD2 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 4 || fail |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail |
| echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/null --key-slot 5 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 5 $KEY1 || fail |
| $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail |
| |
| # special "-" handling |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail |
| $CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail |
| |
| # [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2 |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail |
| # keyfile/keyfile |
| $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail |
| $CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail |
| # passphrase/keyfile |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail |
| # passphrase/passphrase |
| echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail |
| # keyfile/passphrase |
| echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 3 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail |
| |
| prepare "[18] RemoveKey passphrase and keyfile" reuse |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" && fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail |
| [ $? -ne 2 ] && fail "luksRemoveKey should return EPERM exit code" |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" && fail |
| # if password or keyfile is provided, batch mode must not suppress it |
| echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail |
| echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail |
| echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail |
| echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail |
| # kill slot using passphrase from 1 |
| echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail |
| # remove key0 / slot 0 |
| echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" && fail |
| # last keyslot, in batch mode no passphrase needed... |
| $CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail |
| |
| prepare "[19] create & status & resize" wipe |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "offset:" | grep -q "3 sectors" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "skipped:" | grep -q "4 sectors" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "mode:" | grep -q "readonly" || fail |
| $CRYPTSETUP -q resize $DEV_NAME --size 100 || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP -q resize $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "39997 sectors" || fail |
| # Resize underlying loop device as well |
| truncate -s 16M $IMG || fail |
| $CRYPTSETUP -q resize $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "32765 sectors" || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME >/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 $LOOPDEV || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 --size 100 $LOOPDEV || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| # verify is ignored on non-tty input |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --verify-passphrase 2>/dev/null || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size 255 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size -1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 -l -1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d blah 2>/dev/null && fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d /dev/urandom || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| if dm_crypt_keyring_support; then |
| echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME 2>/dev/null && fail |
| fi |
| echo $PWD1 | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen --disable-keyring $LOOPDEV $DEV_NAME || fail |
| echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| if dm_crypt_keyring_support; then |
| $CRYPTSETUP -q resize --disable-keyring --size 100 $DEV_NAME 2>/dev/null && fail |
| fi |
| |
| prepare "[20] Disallow open/create if already mapped." wipe |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME2 $LOOPDEV -d $KEY1 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV 2>/dev/null && fail |
| $CRYPTSETUP remove $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| |
| prepare "[21] luksDump" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail |
| echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key | grep -q "MK dump:" || can_fail_fips |
| $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key -d $KEY1 | grep -q "MK dump:" || can_fail_fips |
| echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE >/dev/null || can_fail_fips |
| echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE 2>/dev/null && fail |
| fips_mode || { |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --master-key-file $VK_FILE $LOOPDEV || fail |
| } |
| |
| prepare "[22] remove disappeared device" wipe |
| dmsetup create $DEV_NAME --table "0 39998 linear $LOOPDEV 2" || fail |
| echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks2 /dev/mapper/$DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail |
| # underlying device now returns error but node is still present |
| dmsetup load $DEV_NAME --table "0 40000 error" || fail |
| dmsetup resume $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME2 || fail |
| dmsetup remove $DEV_NAME || fail |
| |
| prepare "[23] ChangeKey passphrase and keyfile" wipe |
| # [0]$KEY1 [1]key0 |
| $CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail |
| # keyfile [0] / keyfile [0] |
| $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail |
| # passphrase [1] / passphrase [1] |
| echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail |
| # keyfile [0] / keyfile [new] |
| $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" && fail |
| # passphrase [1] / passphrase [new] |
| echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail |
| # use all slots |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail |
| # still allows replace |
| #FIXME |
| #$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail |
| #$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail |
| |
| prepare "[24] Keyfile limit" wipe |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail |
| $CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l -1 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail |
| [ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code" |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail |
| # -l is ignored for stdin if _only_ passphrase is used |
| echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail |
| # this is stupid, but expected |
| echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail |
| echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail |
| echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail |
| # offset |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail |
| $CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail |
| $CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| |
| prepare "[25] Create shared segments" wipe |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --offset 0 --size 256 || fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 --shared || fail |
| $CRYPTSETUP -q remove $DEV_NAME2 || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| |
| prepare "[26] Suspend/Resume" wipe |
| # only LUKS is supported |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail |
| # LUKS |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME || fail |
| $CRYPTSETUP -q resize $DEV_NAME 2>/dev/null && fail |
| echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail |
| [ $? -ne 2 ] && fail "luksResume should return EPERM exit code" |
| echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[27] luksOpen with specified key slot number" new |
| # first, let's try passphrase option |
| echo $PWD3 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -S 5 --type luks2 $LOOPDEV || fail |
| echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail |
| check_exists |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail |
| echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| # second, try it with keyfiles |
| $CRYPTSETUP -q luksFormat -q -S 5 $FAST_PBKDF_OPT -d $KEY5 --type luks2 $LOOPDEV || fail |
| $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail |
| check_exists |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| $CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| # test keyslot not assigned to segment is unable to unlock volume |
| # otoh it should be allowed to test for proper passphrase |
| echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail |
| echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_KEYU || fail |
| echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| echo $PWD1 | $CRYPTSETUP open $HEADER_KEYU $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| echo $PWD0 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksKillSlot -q $HEADER_KEYU 0 |
| $CRYPTSETUP luksDump $HEADER_KEYU | grep -q "0: luks2" && fail |
| echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail |
| echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_KEYU || fail |
| echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME && fail |
| |
| prepare "[28] Detached LUKS header" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail |
| #FIXME |
| #echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 4096 || fail |
| $CRYPTSETUP luksDump $HEADER_IMG | grep -e "0: crypt" -A1 | grep -qe $((4096*512)) || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q resize $DEV_NAME --size 100 --header $HEADER_IMG || fail |
| $CRYPTSETUP -q status $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "type:" | grep -q "n/a" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail |
| echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME && fail |
| echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail |
| $CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" || fail |
| $CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail |
| $CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" && fail |
| |
| prepare "[29] Repair metadata" wipe |
| xz -dk $HEADER_LUKS2_PV.xz |
| $CRYPTSETUP isLuks --disable-locks $HEADER_LUKS2_PV && fail |
| $CRYPTSETUP isLuks $HEADER_LUKS2_PV && fail |
| $CRYPTSETUP isLuks --disable-locks --type luks2 $HEADER_LUKS2_PV && fail |
| $CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV && fail |
| $CRYPTSETUP -q repair $HEADER_LUKS2_PV || fail |
| $CRYPTSETUP isLuks $HEADER_LUKS2_PV || fail |
| $CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV || fail |
| $CRYPTSETUP isLuks --type luks1 $HEADER_LUKS2_PV && fail |
| |
| prepare "[30] LUKS erase" wipe |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail |
| $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail |
| $CRYPTSETUP luksErase -q $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" && fail |
| |
| prepare "[31] LUKS convert" wipe |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail |
| $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail |
| $CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail |
| $CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail |
| |
| if dm_crypt_keyring_flawed; then |
| prepare "[32a] LUKS2 keyring dm-crypt bug" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| # key must not load in kernel key even when dm-crypt module is missing |
| if rmmod dm-crypt > /dev/null 2>&1; then |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| fi |
| fi |
| |
| if dm_crypt_keyring_support; then |
| prepare "[32] LUKS2 key in keyring" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail |
| # check keyring support detection works as expected |
| rmmod dm-crypt > /dev/null 2>&1 || true |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail |
| |
| $CRYPTSETUP close $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksResume --disable-keyring $DEV_NAME --header $HEADER_IMG || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| fi |
| |
| # FIXME: candidate for non-root tests |
| prepare "[33] tokens" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail |
| if [ $HAVE_KEYRING -gt 0 ]; then |
| |
| test_and_prepare_keyring |
| |
| $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 --token-id 3 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" || fail |
| # keyslot 5 is inactive |
| $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 5 2> /dev/null && fail |
| # key description is not reachable |
| $CRYPTSETUP open --token-only $LOOPDEV --test-passphrase && fail |
| # wrong passphrase |
| load_key user $TEST_TOKEN0 "blabla" "$TEST_KEYRING" || fail "Cannot load 32 byte user key type" |
| $CRYPTSETUP open --token-only $LOOPDEV --test-passphrase 2>/dev/null && fail |
| load_key user $TEST_TOKEN0 $PWD1 "$TEST_KEYRING" || fail "Cannot load 32 byte user key type" |
| $CRYPTSETUP open --token-only $LOOPDEV --test-passphrase || fail |
| $CRYPTSETUP open --token-only $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP status $DEV_NAME > /dev/null || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| $CRYPTSETUP token remove --token-id 3 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" && fail |
| |
| # test we can remove keyslot with token |
| echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -S4 $FAST_PBKDF_OPT $LOOPDEV || fail |
| $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 4 || fail |
| $CRYPTSETUP -q luksKillSlot $LOOPDEV 4 || fail |
| fi |
| echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 10 || fail |
| echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 11 --json-file - || fail |
| echo -n "$IMPORT_TOKEN" > $TOKEN_FILE0 |
| $CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 || fail |
| $CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 2>/dev/null && fail |
| $CRYPTSETUP token export $LOOPDEV --token-id 10 | diff --from-file - $TOKEN_FILE0 || fail |
| $CRYPTSETUP token export $LOOPDEV --token-id 11 | diff --from-file - $TOKEN_FILE0 || fail |
| $CRYPTSETUP token export $LOOPDEV --token-id 12 | diff --from-file - $TOKEN_FILE0 || fail |
| $CRYPTSETUP token export $LOOPDEV --token-id 12 --json-file $TOKEN_FILE1 || fail |
| diff $TOKEN_FILE0 $TOKEN_FILE1 || fail |
| $CRYPTSETUP token export $LOOPDEV --token-id 12 > $TOKEN_FILE1 || fail |
| diff $TOKEN_FILE0 $TOKEN_FILE1 || fail |
| |
| prepare "[34] LUKS keyslot priority" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -S 1 || fail |
| echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -S 5 || fail |
| $CRYPTSETUP config $LOOPDEV -S 0 --priority prefer && fail |
| $CRYPTSETUP config $LOOPDEV -S 1 --priority bla >/dev/null 2>&1 && fail |
| $CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase -S 1 || fail |
| echo $PWD2 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail |
| $CRYPTSETUP config $LOOPDEV -S 1 --priority normal || fail |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail |
| $CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail |
| |
| prepare "[35] LUKS label and subsystem" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "(no subsystem)" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --subsystem SatelliteTwo --label TheLabel || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteTwo" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail |
| $CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail |
| $CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree --label TheLabel |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail |
| |
| prepare "[36] LUKS PBKDF setting" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf bla $LOOPDEV >/dev/null 2>&1 && fail |
| # Force setting, no benchmark. PBKDF2 has 1000 iterations as a minimum |
| echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf pbkdf2 --pbkdf-force-iterations 999 $LOOPDEV 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2 --pbkdf-force-iterations 1234 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Iterations:" | grep -q "1234" || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 3 $LOOPDEV 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 4 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2id" || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i --pbkdf-force-iterations 4 \ |
| --pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2i" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | grep -q "4" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | grep -q "1234" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "Threads:" | grep -q "1" || fail |
| # Benchmark |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i -i 500 --pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || fail |
| [ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || fail |
| [ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2 -i 500 $LOOPDEV || fail |
| [ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep -m1 "Iterations:" | cut -d' ' -f 2 | sed -e 's/\ //g')" -gt 1000 ] || fail |
| |
| prepare "[37] LUKS Keyslot convert" wipe |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail |
| $CRYPTSETUP -q luksConvertKey $LOOPDEV --key-file $KEY5 && fail |
| $CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail |
| $CRYPTSETUP -q luksConvertKey $LOOPDEV -S 5 --key-file $KEY5 --pbkdf argon2i -i1 --pbkdf-memory 32 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -S 1 --key-file $KEY5 || fail |
| $CRYPTSETUP -q luksKillSlot $LOOPDEV 5 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail |
| echo $PWD1 | $CRYPTSETUP -q luksConvertKey $LOOPDEV -S 1 --pbkdf argon2i -i1 --pbkdf-memory 32 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail |
| |
| prepare "[38] luksAddKey unbound tests" wipe |
| $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail |
| # unbound key may have arbitrary size |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 16 $LOOPDEV || fail |
| echo $PWD2 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 32 -S 2 $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" || fail |
| echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 8 -S 3 --master-key-file /dev/urandom $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" || fail |
| # unbound key size is required |
| echo $PWD1 | $CRYPTSETUP -q luksAddKey --unbound $LOOPDEV 2>/dev/null && fail |
| echo $PWD3 | $CRYPTSETUP -q luksAddKey --unbound --master-key-file /dev/urandom $LOOPDEV 2> /dev/null && fail |
| # do not allow to replace keyslot by unbound slot |
| echo $PWD1 | $CRYPTSETUP -q luksAddKey -S5 --unbound -s 32 $LOOPDEV 2>/dev/null && fail |
| echo $PWD2 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail |
| echo $PWD2 | $CRYPTSETUP -q open $LOOPDEV --test-passphrase || fail |
| echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV $DEV_NAME 2> /dev/null && fail |
| echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV --test-passphrase || fail |
| echo $PWD1 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail |
| echo $PWD1 | $CRYPTSETUP -q open $LOOPDEV --test-passphrase || fail |
| # do not allow adding keyslot by unbound keyslot |
| echo -e "$PWD2\n$PWD1" | $CRYPTSETUP -q luksAddKey $LOOPDEV 2> /dev/null && fail |
| # check adding keyslot works when there's unbound keyslot |
| echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --key-file $KEY5 -S8 || fail |
| echo $PWD1 | $CRYPTSETUP open $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP close $DEV_NAME || fail |
| $CRYPTSETUP luksKillSlot -q $LOOPDEV 2 |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" && fail |
| $CRYPTSETUP luksKillSlot -q $LOOPDEV 3 |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" && fail |
| |
| remove_mapping |
| exit 0 |
