man/modprobe.8.scd

MODPROBE(8) "kmod" "modprobe"

# NAME

modprobe - Add and remove modules from the Linux Kernel

# SYNOPSIS

*modprobe* [*-v*] [*-V*] [*-C* _config-file_] [*-n*] [*-i*] [*-q*] [*-b*] _modulename_
\ \ \ \ \ \ \ \ \ \[_module parameters_]

*modprobe* [*-r*] [*-v*] [*-n*] [*-i*] _modulename_

*modprobe* [*-c*]

*modprobe* [*--show-modversions*] _filename_

# DESCRIPTION

*modprobe* intelligently adds or removes a module from the Linux kernel: note
that for convenience, there is no difference between \_ and - in module names
(automatic underscore conversion is performed). *modprobe* looks in the module
directory @MODULE_DIRECTORY@/$(uname -r) for all the modules and other files,
except for the optional configuration files (see *modprobe.d*(5)). *modprobe* will
also use module options specified on the kernel command line in the form of
<module>.<option> and blacklists in the form of modprobe.blacklist=<module>.

Note that unlike in 2.4 series Linux kernels (which are not supported by this
tool) this version of *modprobe* does not do anything to the module itself: the
work of resolving symbols and understanding parameters is done inside the
kernel. So module failure is sometimes accompanied by a kernel message: see
*dmesg*(8).

*modprobe* expects an up-to-date modules.dep.bin file as generated by the
corresponding *depmod* utility shipped along with *modprobe* (see *depmod*(8)).
This file lists what other modules each module needs (if any), and *modprobe*
uses this to add or remove these dependencies automatically.

If any arguments are given after the _modulename_, they are passed to the kernel
(in addition to any options listed in the configuration file).

When loading modules, _modulename_ can also be a path to the module. If the path
is relative, it must explicitly start with "./". Note that this may fail when
using a path to a module with dependencies not matching the installed *depmod*
database.

# OPTIONS

*-a*, *--all*
	Insert all module names on the command line.

*-b*, *--use-blacklist*
	This option causes *modprobe* to apply the *blacklist* commands in the
	configuration files (if any) to module names as well. It is usually used
	by *udev*(7).

*-C* _directory_, *--config* _directory_
	This option overrides the default configuration directory. See
	*modprobe.d*(5).

	This option is passed through *install* or *remove* commands to other
	*modprobe* commands in the MODPROBE_OPTIONS environment variable.

*-c*, *--show-config*
	Print out the effective configuration from the config directory and exit.

	For compatibility reasons *--showconfig* is also accepted for this option
	but will be removed after kmod 36.

*--show-modversions*
	Print out a list of module versioning information required by a module.
	This option is commonly used by distributions in order to package up a
	Linux kernel module using module versioning deps.

	For compatibility reasons *--dump-modversions* is also accepted for this
	option but will be removed after kmod 36.

*--show-exports*
	Print out a list of symbols exported by the module. This option is
	commonly used to inspect the function list, while investigating loading
	of modules with partial or missing dependencies.

*-d*, *--dirname*
	Root directory for modules, / by default.

*--first-time*
	Normally, *modprobe* will succeed (and do nothing) if told to insert a
	module which is already present or to remove a module which isn't
	present. This is ideal for simple scripts; however, more complicated
	scripts often want to know whether *modprobe* really did something: this
	option makes *modprobe* fail in the case that it actually didn't do
	anything.

*--force-vermagic*
	Every module contains a small string containing important information,
	such as the kernel and compiler versions. If a module fails to load and
	the kernel complains that the "version magic" doesn't match, you can use
	this option to remove it. Naturally, this check is there for your
	protection, so using this option is dangerous unless you know what
	you're doing.

	This applies to any modules inserted: both the module (or alias) on the
	command line and any modules on which it depends.

*--force-modversion*
	When modules are compiled with CONFIG_MODVERSIONS set, a section
	detailing the versions of every interfaced used by (or supplied by) the
	module is created. If a module fails to load and the kernel complains
	that the module disagrees about a version of some interface, you can use
	*--force-modversion* to remove the version information altogether.
	Naturally, this check is there for your protection, so using this option
	is dangerous unless you know what you're doing.

	This applies to any modules inserted: both the module (or alias) on the
	command line and any modules on which it depends.

*-f*, *--force*
	Try to strip any versioning information from the module which might
	otherwise stop it from loading: this is the same as using both
	*--force-vermagic* and *--force-modversion*. Naturally, these checks are
	there for your protection, so using this option is dangerous unless you
	know what you are doing.

	This applies to any modules inserted: both the module (or alias) on the
	command line and any modules on which it depends.

*-i*, *--ignore-install*, *--ignore-remove*
	This option causes *modprobe* to ignore *install* and *remove* commands
	in the configuration file (if any) for the module specified on the
	command line (any dependent modules are still subject to commands set
	for them in the configuration file). Both *install* and *remove* commands
	will currently be ignored when this option is used regardless of whether
	the request was more specifically made with only one or other (and not
	both) of *--ignore-install* or *--ignore-remove*. See *modprobe.d*(5).

*-n*, *--dry-run*
	This option does everything but actually insert or delete the modules
	(or run the install or remove commands). Combined with *-v*, it is
	useful for debugging problems.

	For compatibility reasons *--show* is also accepted for this option but
	will be removed after kmod 36.

*-q*, *--quiet*
	With this flag, *modprobe* won't print an error message if you try to
	remove or insert a module it can't find (and isn't an alias or
	*install*/*remove* command). However, it will still return with a non-zero
	exit status. The kernel uses this to opportunistically probe for modules
	which might exist using request_module.

*-R*, *--show-alias*
	Print all module names matching an alias. This can be useful for
	debugging module alias problems.

	For compatibility reasons *--resolve-alias* is also accepted for this
	option but will be removed after kmod 36.

*-r*, *--remove*
	This option causes *modprobe* to remove rather than insert a module. If
	the modules it depends on are also unused, *modprobe* will try to remove
	them too. Unlike insertion, more than one module can be specified on the
	command line (it does not make sense to specify module parameters when
	removing modules).

	There is usually no reason to remove modules, but some buggy modules
	require it. Your distribution kernel may not have been built to support
	removal of modules at all.

*--remove-holders*
	This option causes *modprobe* to remove the mentioned module(s), alongside
	other modules that depend on it/them - aka the reverse dependency list.
	This options implies --remove.

	For compatibility reasons *--remove-dependencies* is also accepted for
	this option but will be removed after kmod 36.

*-w* _TIMEOUT_MSEC_, *--wait* _TIMEOUT_MSEC_
	This option causes *modprobe -r *to continue trying to remove a module
	if it fails due to the module being busy, i.e. its refcount is not 0 at
	the time the call is made. Modprobe tries to remove the module with an
	incremental sleep time between each tentative up until the maximum wait
	time in milliseconds passed in this option.

*-S* _version_, *--set-version* _version_
	Set the kernel version, rather than using *uname*(2) to decide on the
	kernel version (which dictates where to find the modules).

*--show-depends*
	List the dependencies of a module (or alias), including the module
	itself. This produces a (possibly empty) set of module filenames, one
	per line, each starting with "insmod" and is typically used by
	distributions to determine which modules to include when generating
	initrd/initramfs images. *Install* commands which apply are shown
	prefixed by "install". It does not run any of the install commands. Note
	that *modinfo*(8) can be used to extract dependencies of a module from the
	module itself, but knows nothing of aliases or install commands.

*-s*, *--syslog*
	This option causes any error messages to go through the syslog mechanism
	(as LOG_DAEMON with level LOG_NOTICE) rather than to standard error.
	This is also automatically enabled when stderr is unavailable.

	This option is passed through *install* or *remove* commands to other
	*modprobe* commands in the MODPROBE_OPTIONS environment variable.

*-V*, *--version*
	Show version of program and exit.

*-v*, *--verbose*
	Print messages about what the program is doing. Usually *modprobe* only
	prints messages if something goes wrong.

	This option is passed through *install* or *remove* commands to other
	*modprobe* commands in the MODPROBE_OPTIONS environment variable.

# ENVIRONMENT

The MODPROBE_OPTIONS environment variable can also be used to pass command line
arguments to *modprobe*. The format is intentionally left undocumented, since
the use by third-party tools and scripts is discouraged.

The environment variable originates with the implementation of the install
rules.

# SEE ALSO

*modprobe.d*(5), *insmod*(8), *rmmod*(8), *lsmod*(8), *modinfo*(8), *depmod*(8)