blob: d5a5b30458fa33794c04eab5de9299492616a1ac [file] [log] [blame]
/*
* (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
* use of U-Boot, and does *not* fall under the heading of "derived
* work".
********************************************************************
*/
#ifndef __UBOOT_IMAGE_H__
#define __UBOOT_IMAGE_H__
/*
* Operating System Codes
*/
#define IH_OS_INVALID 0 /* Invalid OS */
#define IH_OS_OPENBSD 1 /* OpenBSD */
#define IH_OS_NETBSD 2 /* NetBSD */
#define IH_OS_FREEBSD 3 /* FreeBSD */
#define IH_OS_4_4BSD 4 /* 4.4BSD */
#define IH_OS_LINUX 5 /* Linux */
#define IH_OS_SVR4 6 /* SVR4 */
#define IH_OS_ESIX 7 /* Esix */
#define IH_OS_SOLARIS 8 /* Solaris */
#define IH_OS_IRIX 9 /* Irix */
#define IH_OS_SCO 10 /* SCO */
#define IH_OS_DELL 11 /* Dell */
#define IH_OS_NCR 12 /* NCR */
#define IH_OS_LYNXOS 13 /* LynxOS */
#define IH_OS_VXWORKS 14 /* VxWorks */
#define IH_OS_PSOS 15 /* pSOS */
#define IH_OS_QNX 16 /* QNX */
#define IH_OS_U_BOOT 17 /* Firmware */
#define IH_OS_RTEMS 18 /* RTEMS */
#define IH_OS_ARTOS 19 /* ARTOS */
#define IH_OS_UNITY 20 /* Unity OS */
/*
* CPU Architecture Codes (supported by Linux)
*/
#define IH_CPU_INVALID 0 /* Invalid CPU */
#define IH_CPU_ALPHA 1 /* Alpha */
#define IH_CPU_ARM 2 /* ARM */
#define IH_CPU_I386 3 /* Intel x86 */
#define IH_CPU_IA64 4 /* IA64 */
#define IH_CPU_MIPS 5 /* MIPS */
#define IH_CPU_MIPS64 6 /* MIPS 64 Bit */
#define IH_CPU_PPC 7 /* PowerPC */
#define IH_CPU_S390 8 /* IBM S390 */
#define IH_CPU_SH 9 /* SuperH */
#define IH_CPU_SPARC 10 /* Sparc */
#define IH_CPU_SPARC64 11 /* Sparc 64 Bit */
#define IH_CPU_M68K 12 /* M68K */
#define IH_CPU_NIOS 13 /* Nios-32 */
#define IH_CPU_MICROBLAZE 14 /* MicroBlaze */
#define IH_CPU_NIOS2 15 /* Nios-II */
#define IH_CPU_BLACKFIN 16 /* Blackfin */
#define IH_CPU_AVR32 17 /* AVR32 */
/*
* Image Types
*
* "Standalone Programs" are directly runnable in the environment
* provided by U-Boot; it is expected that (if they behave
* well) you can continue to work in U-Boot after return from
* the Standalone Program.
* "OS Kernel Images" are usually images of some Embedded OS which
* will take over control completely. Usually these programs
* will install their own set of exception handlers, device
* drivers, set up the MMU, etc. - this means, that you cannot
* expect to re-enter U-Boot except by resetting the CPU.
* "RAMDisk Images" are more or less just data blocks, and their
* parameters (address, size) are passed to an OS kernel that is
* being started.
* "Multi-File Images" contain several images, typically an OS
* (Linux) kernel image and one or more data images like
* RAMDisks. This construct is useful for instance when you want
* to boot over the network using BOOTP etc., where the boot
* server provides just a single image file, but you want to get
* for instance an OS kernel and a RAMDisk image.
*
* "Multi-File Images" start with a list of image sizes, each
* image size (in bytes) specified by an "uint32_t" in network
* byte order. This list is terminated by an "(uint32_t)0".
* Immediately after the terminating 0 follow the images, one by
* one, all aligned on "uint32_t" boundaries (size rounded up to
* a multiple of 4 bytes - except for the last file).
*
* "Firmware Images" are binary images containing firmware (like
* U-Boot or FPGA images) which usually will be programmed to
* flash memory.
*
* "Script files" are command sequences that will be executed by
* U-Boot's command interpreter; this feature is especially
* useful when you configure U-Boot to use a real shell (hush)
* as command interpreter (=> Shell Scripts).
*/
#define IH_TYPE_INVALID 0 /* Invalid Image */
#define IH_TYPE_STANDALONE 1 /* Standalone Program */
#define IH_TYPE_KERNEL 2 /* OS Kernel Image */
#define IH_TYPE_RAMDISK 3 /* RAMDisk Image */
#define IH_TYPE_MULTI 4 /* Multi-File Image */
#define IH_TYPE_FIRMWARE 5 /* Firmware Image */
#define IH_TYPE_SCRIPT 6 /* Script file */
#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
/*
* Compression Types
*/
#define IH_COMP_NONE 0 /* No Compression Used */
#define IH_COMP_GZIP 1 /* gzip Compression Used */
#define IH_COMP_BZIP2 2 /* bzip2 Compression Used */
#define IH_MAGIC 0x27051956 /* Image Magic Number */
#define IH_NMLEN 32 /* Image Name Length */
/*
* all data in network byte order (aka natural aka bigendian)
*/
typedef struct uboot_image_header {
uint32_t ih_magic; /* Image Header Magic Number */
uint32_t ih_hcrc; /* Image Header CRC Checksum */
uint32_t ih_time; /* Image Creation Timestamp */
uint32_t ih_size; /* Image Data Size */
uint32_t ih_load; /* Data Load Address */
uint32_t ih_ep; /* Entry Point Address */
uint32_t ih_dcrc; /* Image Data CRC Checksum */
uint8_t ih_os; /* Operating System */
uint8_t ih_arch; /* CPU architecture */
uint8_t ih_type; /* Image Type */
uint8_t ih_comp; /* Compression Type */
uint8_t ih_name[IH_NMLEN]; /* Image Name */
} uboot_image_header_t;
#endif /* __IMAGE_H__ */