blob: acaac0cc4cb62a5618c599c5c6a8505f9c0a4f08 [file] [log] [blame]
/*
* QEMU VNC display driver: SASL auth protocol
*
* Copyright (C) 2009 Red Hat, Inc
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vnc.h"
/* Max amount of data we send/recv for SASL steps to prevent DOS */
#define SASL_DATA_MAX_LEN (1024 * 1024)
void vnc_sasl_client_cleanup(VncState *vs)
{
if (vs->sasl.conn) {
vs->sasl.runSSF = vs->sasl.waitWriteSSF = vs->sasl.wantSSF = 0;
vs->sasl.encodedLength = vs->sasl.encodedOffset = 0;
vs->sasl.encoded = NULL;
free(vs->sasl.username);
free(vs->sasl.mechlist);
vs->sasl.username = vs->sasl.mechlist = NULL;
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
}
}
long vnc_client_write_sasl(VncState *vs)
{
long ret;
VNC_DEBUG("Write SASL: Pending output %p size %d offset %d Encoded: %p size %d offset %d\n",
vs->output.buffer, vs->output.capacity, vs->output.offset,
vs->sasl.encoded, vs->sasl.encodedLength, vs->sasl.encodedOffset);
if (!vs->sasl.encoded) {
int err;
err = sasl_encode(vs->sasl.conn,
(char *)vs->output.buffer,
vs->output.offset,
(const char **)&vs->sasl.encoded,
&vs->sasl.encodedLength);
if (err != SASL_OK)
return vnc_client_io_error(vs, -1, EIO);
vs->sasl.encodedOffset = 0;
}
ret = vnc_client_write_buf(vs,
vs->sasl.encoded + vs->sasl.encodedOffset,
vs->sasl.encodedLength - vs->sasl.encodedOffset);
if (!ret)
return 0;
vs->sasl.encodedOffset += ret;
if (vs->sasl.encodedOffset == vs->sasl.encodedLength) {
vs->output.offset = 0;
vs->sasl.encoded = NULL;
vs->sasl.encodedOffset = vs->sasl.encodedLength = 0;
}
/* Can't merge this block with one above, because
* someone might have written more unencrypted
* data in vs->output while we were processing
* SASL encoded output
*/
if (vs->output.offset == 0) {
qemu_set_fd_handler2(vs->csock, NULL, vnc_client_read, NULL, vs);
}
return ret;
}
long vnc_client_read_sasl(VncState *vs)
{
long ret;
uint8_t encoded[4096];
const char *decoded;
unsigned int decodedLen;
int err;
ret = vnc_client_read_buf(vs, encoded, sizeof(encoded));
if (!ret)
return 0;
err = sasl_decode(vs->sasl.conn,
(char *)encoded, ret,
&decoded, &decodedLen);
if (err != SASL_OK)
return vnc_client_io_error(vs, -1, -EIO);
VNC_DEBUG("Read SASL Encoded %p size %ld Decoded %p size %d\n",
encoded, ret, decoded, decodedLen);
buffer_reserve(&vs->input, decodedLen);
buffer_append(&vs->input, decoded, decodedLen);
return decodedLen;
}
static int vnc_auth_sasl_check_access(VncState *vs)
{
const void *val;
int err;
int allow;
err = sasl_getprop(vs->sasl.conn, SASL_USERNAME, &val);
if (err != SASL_OK) {
VNC_DEBUG("cannot query SASL username on connection %d (%s), denying access\n",
err, sasl_errstring(err, NULL, NULL));
return -1;
}
if (val == NULL) {
VNC_DEBUG("no client username was found, denying access\n");
return -1;
}
VNC_DEBUG("SASL client username %s\n", (const char *)val);
vs->sasl.username = qemu_strdup((const char*)val);
if (vs->vd->sasl.acl == NULL) {
VNC_DEBUG("no ACL activated, allowing access\n");
return 0;
}
allow = qemu_acl_party_is_allowed(vs->vd->sasl.acl, vs->sasl.username);
VNC_DEBUG("SASL client %s %s by ACL\n", vs->sasl.username,
allow ? "allowed" : "denied");
return allow ? 0 : -1;
}
static int vnc_auth_sasl_check_ssf(VncState *vs)
{
const void *val;
int err, ssf;
if (!vs->sasl.wantSSF)
return 1;
err = sasl_getprop(vs->sasl.conn, SASL_SSF, &val);
if (err != SASL_OK)
return 0;
ssf = *(const int *)val;
VNC_DEBUG("negotiated an SSF of %d\n", ssf);
if (ssf < 56)
return 0; /* 56 is good for Kerberos */
/* Only setup for read initially, because we're about to send an RPC
* reply which must be in plain text. When the next incoming RPC
* arrives, we'll switch on writes too
*
* cf qemudClientReadSASL in qemud.c
*/
vs->sasl.runSSF = 1;
/* We have a SSF that's good enough */
return 1;
}
/*
* Step Msg
*
* Input from client:
*
* u32 clientin-length
* u8-array clientin-string
*
* Output to client:
*
* u32 serverout-length
* u8-array serverout-strin
* u8 continue
*/
static int protocol_client_auth_sasl_step_len(VncState *vs, uint8_t *data, size_t len);
static int protocol_client_auth_sasl_step(VncState *vs, uint8_t *data, size_t len)
{
uint32_t datalen = len;
const char *serverout;
unsigned int serveroutlen;
int err;
char *clientdata = NULL;
/* NB, distinction of NULL vs "" is *critical* in SASL */
if (datalen) {
clientdata = (char*)data;
clientdata[datalen-1] = '\0'; /* Wire includes '\0', but make sure */
datalen--; /* Don't count NULL byte when passing to _start() */
}
VNC_DEBUG("Step using SASL Data %p (%d bytes)\n",
clientdata, datalen);
err = sasl_server_step(vs->sasl.conn,
clientdata,
datalen,
&serverout,
&serveroutlen);
if (err != SASL_OK &&
err != SASL_CONTINUE) {
VNC_DEBUG("sasl step failed %d (%s)\n",
err, sasl_errdetail(vs->sasl.conn));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
if (serveroutlen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("sasl step reply data too long %d\n",
serveroutlen);
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
VNC_DEBUG("SASL return data %d bytes, nil; %d\n",
serveroutlen, serverout ? 0 : 1);
if (serveroutlen) {
vnc_write_u32(vs, serveroutlen + 1);
vnc_write(vs, serverout, serveroutlen + 1);
} else {
vnc_write_u32(vs, 0);
}
/* Whether auth is complete */
vnc_write_u8(vs, err == SASL_CONTINUE ? 0 : 1);
if (err == SASL_CONTINUE) {
VNC_DEBUG("%s", "Authentication must continue\n");
/* Wait for step length */
vnc_read_when(vs, protocol_client_auth_sasl_step_len, 4);
} else {
if (!vnc_auth_sasl_check_ssf(vs)) {
VNC_DEBUG("Authentication rejected for weak SSF %d\n", vs->csock);
goto authreject;
}
/* Check username whitelist ACL */
if (vnc_auth_sasl_check_access(vs) < 0) {
VNC_DEBUG("Authentication rejected for ACL %d\n", vs->csock);
goto authreject;
}
VNC_DEBUG("Authentication successful %d\n", vs->csock);
vnc_write_u32(vs, 0); /* Accept auth */
/*
* Delay writing in SSF encoded mode until pending output
* buffer is written
*/
if (vs->sasl.runSSF)
vs->sasl.waitWriteSSF = vs->output.offset;
start_client_init(vs);
}
return 0;
authreject:
vnc_write_u32(vs, 1); /* Reject auth */
vnc_write_u32(vs, sizeof("Authentication failed"));
vnc_write(vs, "Authentication failed", sizeof("Authentication failed"));
vnc_flush(vs);
vnc_client_error(vs);
return -1;
authabort:
vnc_client_error(vs);
return -1;
}
static int protocol_client_auth_sasl_step_len(VncState *vs, uint8_t *data, size_t len)
{
uint32_t steplen = read_u32(data, 0);
VNC_DEBUG("Got client step len %d\n", steplen);
if (steplen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("Too much SASL data %d\n", steplen);
vnc_client_error(vs);
return -1;
}
if (steplen == 0)
return protocol_client_auth_sasl_step(vs, NULL, 0);
else
vnc_read_when(vs, protocol_client_auth_sasl_step, steplen);
return 0;
}
/*
* Start Msg
*
* Input from client:
*
* u32 clientin-length
* u8-array clientin-string
*
* Output to client:
*
* u32 serverout-length
* u8-array serverout-strin
* u8 continue
*/
#define SASL_DATA_MAX_LEN (1024 * 1024)
static int protocol_client_auth_sasl_start(VncState *vs, uint8_t *data, size_t len)
{
uint32_t datalen = len;
const char *serverout;
unsigned int serveroutlen;
int err;
char *clientdata = NULL;
/* NB, distinction of NULL vs "" is *critical* in SASL */
if (datalen) {
clientdata = (char*)data;
clientdata[datalen-1] = '\0'; /* Should be on wire, but make sure */
datalen--; /* Don't count NULL byte when passing to _start() */
}
VNC_DEBUG("Start SASL auth with mechanism %s. Data %p (%d bytes)\n",
vs->sasl.mechlist, clientdata, datalen);
err = sasl_server_start(vs->sasl.conn,
vs->sasl.mechlist,
clientdata,
datalen,
&serverout,
&serveroutlen);
if (err != SASL_OK &&
err != SASL_CONTINUE) {
VNC_DEBUG("sasl start failed %d (%s)\n",
err, sasl_errdetail(vs->sasl.conn));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
if (serveroutlen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("sasl start reply data too long %d\n",
serveroutlen);
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
VNC_DEBUG("SASL return data %d bytes, nil; %d\n",
serveroutlen, serverout ? 0 : 1);
if (serveroutlen) {
vnc_write_u32(vs, serveroutlen + 1);
vnc_write(vs, serverout, serveroutlen + 1);
} else {
vnc_write_u32(vs, 0);
}
/* Whether auth is complete */
vnc_write_u8(vs, err == SASL_CONTINUE ? 0 : 1);
if (err == SASL_CONTINUE) {
VNC_DEBUG("%s", "Authentication must continue\n");
/* Wait for step length */
vnc_read_when(vs, protocol_client_auth_sasl_step_len, 4);
} else {
if (!vnc_auth_sasl_check_ssf(vs)) {
VNC_DEBUG("Authentication rejected for weak SSF %d\n", vs->csock);
goto authreject;
}
/* Check username whitelist ACL */
if (vnc_auth_sasl_check_access(vs) < 0) {
VNC_DEBUG("Authentication rejected for ACL %d\n", vs->csock);
goto authreject;
}
VNC_DEBUG("Authentication successful %d\n", vs->csock);
vnc_write_u32(vs, 0); /* Accept auth */
start_client_init(vs);
}
return 0;
authreject:
vnc_write_u32(vs, 1); /* Reject auth */
vnc_write_u32(vs, sizeof("Authentication failed"));
vnc_write(vs, "Authentication failed", sizeof("Authentication failed"));
vnc_flush(vs);
vnc_client_error(vs);
return -1;
authabort:
vnc_client_error(vs);
return -1;
}
static int protocol_client_auth_sasl_start_len(VncState *vs, uint8_t *data, size_t len)
{
uint32_t startlen = read_u32(data, 0);
VNC_DEBUG("Got client start len %d\n", startlen);
if (startlen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("Too much SASL data %d\n", startlen);
vnc_client_error(vs);
return -1;
}
if (startlen == 0)
return protocol_client_auth_sasl_start(vs, NULL, 0);
vnc_read_when(vs, protocol_client_auth_sasl_start, startlen);
return 0;
}
static int protocol_client_auth_sasl_mechname(VncState *vs, uint8_t *data, size_t len)
{
char *mechname = malloc(len + 1);
if (!mechname) {
VNC_DEBUG("Out of memory reading mechname\n");
vnc_client_error(vs);
}
strncpy(mechname, (char*)data, len);
mechname[len] = '\0';
VNC_DEBUG("Got client mechname '%s' check against '%s'\n",
mechname, vs->sasl.mechlist);
if (strncmp(vs->sasl.mechlist, mechname, len) == 0) {
if (vs->sasl.mechlist[len] != '\0' &&
vs->sasl.mechlist[len] != ',') {
VNC_DEBUG("One %d", vs->sasl.mechlist[len]);
vnc_client_error(vs);
return -1;
}
} else {
char *offset = strstr(vs->sasl.mechlist, mechname);
VNC_DEBUG("Two %p\n", offset);
if (!offset) {
vnc_client_error(vs);
return -1;
}
VNC_DEBUG("Two '%s'\n", offset);
if (offset[-1] != ',' ||
(offset[len] != '\0'&&
offset[len] != ',')) {
vnc_client_error(vs);
return -1;
}
}
free(vs->sasl.mechlist);
vs->sasl.mechlist = mechname;
VNC_DEBUG("Validated mechname '%s'\n", mechname);
vnc_read_when(vs, protocol_client_auth_sasl_start_len, 4);
return 0;
}
static int protocol_client_auth_sasl_mechname_len(VncState *vs, uint8_t *data, size_t len)
{
uint32_t mechlen = read_u32(data, 0);
VNC_DEBUG("Got client mechname len %d\n", mechlen);
if (mechlen > 100) {
VNC_DEBUG("Too long SASL mechname data %d\n", mechlen);
vnc_client_error(vs);
return -1;
}
if (mechlen < 1) {
VNC_DEBUG("Too short SASL mechname %d\n", mechlen);
vnc_client_error(vs);
return -1;
}
vnc_read_when(vs, protocol_client_auth_sasl_mechname,mechlen);
return 0;
}
#define USES_X509_AUTH(vs) \
((vs)->subauth == VNC_AUTH_VENCRYPT_X509NONE || \
(vs)->subauth == VNC_AUTH_VENCRYPT_X509VNC || \
(vs)->subauth == VNC_AUTH_VENCRYPT_X509PLAIN || \
(vs)->subauth == VNC_AUTH_VENCRYPT_X509SASL)
void start_auth_sasl(VncState *vs)
{
const char *mechlist = NULL;
sasl_security_properties_t secprops;
int err;
char *localAddr, *remoteAddr;
int mechlistlen;
VNC_DEBUG("Initialize SASL auth %d\n", vs->csock);
/* Get local & remote client addresses in form IPADDR;PORT */
if (!(localAddr = vnc_socket_local_addr("%s;%s", vs->csock)))
goto authabort;
if (!(remoteAddr = vnc_socket_remote_addr("%s;%s", vs->csock))) {
free(localAddr);
goto authabort;
}
err = sasl_server_new("vnc",
NULL, /* FQDN - just delegates to gethostname */
NULL, /* User realm */
localAddr,
remoteAddr,
NULL, /* Callbacks, not needed */
SASL_SUCCESS_DATA,
&vs->sasl.conn);
free(localAddr);
free(remoteAddr);
localAddr = remoteAddr = NULL;
if (err != SASL_OK) {
VNC_DEBUG("sasl context setup failed %d (%s)",
err, sasl_errstring(err, NULL, NULL));
vs->sasl.conn = NULL;
goto authabort;
}
#ifdef CONFIG_VNC_TLS
/* Inform SASL that we've got an external SSF layer from TLS/x509 */
if (vs->vd->auth == VNC_AUTH_VENCRYPT &&
vs->vd->subauth == VNC_AUTH_VENCRYPT_X509SASL) {
gnutls_cipher_algorithm_t cipher;
sasl_ssf_t ssf;
cipher = gnutls_cipher_get(vs->tls.session);
if (!(ssf = (sasl_ssf_t)gnutls_cipher_get_key_size(cipher))) {
VNC_DEBUG("%s", "cannot TLS get cipher size\n");
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
ssf *= 8; /* tls key size is bytes, sasl wants bits */
err = sasl_setprop(vs->sasl.conn, SASL_SSF_EXTERNAL, &ssf);
if (err != SASL_OK) {
VNC_DEBUG("cannot set SASL external SSF %d (%s)\n",
err, sasl_errstring(err, NULL, NULL));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
} else
#endif /* CONFIG_VNC_TLS */
vs->sasl.wantSSF = 1;
memset (&secprops, 0, sizeof secprops);
/* Inform SASL that we've got an external SSF layer from TLS */
if (strncmp(vs->vd->display, "unix:", 5) == 0
#ifdef CONFIG_VNC_TLS
/* Disable SSF, if using TLS+x509+SASL only. TLS without x509
is not sufficiently strong */
|| (vs->vd->auth == VNC_AUTH_VENCRYPT &&
vs->vd->subauth == VNC_AUTH_VENCRYPT_X509SASL)
#endif /* CONFIG_VNC_TLS */
) {
/* If we've got TLS or UNIX domain sock, we don't care about SSF */
secprops.min_ssf = 0;
secprops.max_ssf = 0;
secprops.maxbufsize = 8192;
secprops.security_flags = 0;
} else {
/* Plain TCP, better get an SSF layer */
secprops.min_ssf = 56; /* Good enough to require kerberos */
secprops.max_ssf = 100000; /* Arbitrary big number */
secprops.maxbufsize = 8192;
/* Forbid any anonymous or trivially crackable auth */
secprops.security_flags =
SASL_SEC_NOANONYMOUS | SASL_SEC_NOPLAINTEXT;
}
err = sasl_setprop(vs->sasl.conn, SASL_SEC_PROPS, &secprops);
if (err != SASL_OK) {
VNC_DEBUG("cannot set SASL security props %d (%s)\n",
err, sasl_errstring(err, NULL, NULL));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
err = sasl_listmech(vs->sasl.conn,
NULL, /* Don't need to set user */
"", /* Prefix */
",", /* Separator */
"", /* Suffix */
&mechlist,
NULL,
NULL);
if (err != SASL_OK) {
VNC_DEBUG("cannot list SASL mechanisms %d (%s)\n",
err, sasl_errdetail(vs->sasl.conn));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
VNC_DEBUG("Available mechanisms for client: '%s'\n", mechlist);
if (!(vs->sasl.mechlist = strdup(mechlist))) {
VNC_DEBUG("Out of memory");
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
mechlistlen = strlen(mechlist);
vnc_write_u32(vs, mechlistlen);
vnc_write(vs, mechlist, mechlistlen);
vnc_flush(vs);
VNC_DEBUG("Wait for client mechname length\n");
vnc_read_when(vs, protocol_client_auth_sasl_mechname_len, 4);
return;
authabort:
vnc_client_error(vs);
return;
}