| Source: e2fsprogs |
| Section: admin |
| Priority: required |
| Maintainer: Theodore Y. Ts'o <tytso@mit.edu> |
| Build-Depends: gettext, texinfo, pkg-config, libfuse-dev [linux-any kfreebsd-any], libattr1-dev, debhelper (>= 9.0), libblkid-dev, uuid-dev, m4 |
| Standards-Version: 4.0.0 |
| Homepage: http://e2fsprogs.sourceforge.net |
| |
| ifdef(`FUSE2FS',`` |
| Package: fuse2fs |
| Priority: optional |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Architecture: linux-any kfreebsd-any |
| Description: ext2 / ext3 / ext4 file system driver for FUSE |
| fuse2fs is a FUSE file system client that supports reading and |
| writing from devices or image files containing ext2, ext3, and ext4 |
| file systems. |
| '')dnl |
| |
| ifdef(`E2FSCK_STATIC',`` |
| Package: e2fsck-static |
| Priority: optional |
| Depends: ${misc:Depends} |
| Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static |
| Architecture: any |
| Description: statically-linked version of the ext2/ext3/ext4 filesystem checker |
| This may be of some help to you if your filesystem gets corrupted enough |
| to break the shared libraries used by the dynamically linked checker. |
| . |
| This binary takes much more space than its dynamic counterpart located |
| in e2fsprogs, though. |
| . |
| You may want to install a statically-linked shell as well, to be able |
| to run this program if something like your C library gets corrupted. |
| '')dnl |
| |
| Package: e2fsprogs-l10n |
| Priority: extra |
| Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends} |
| Replaces: e2fsprogs (<< 1.43.5-1) |
| Architecture: all |
| Description: ext2/ext3/ext4 file system utilities - translations |
| The ext2, ext3 and ext4 file systems are successors of the original ext |
| ("extended") file system. They are the main file system types used for |
| hard disks on Debian and other Linux systems. |
| . |
| This package provides translations for messages for programs found in |
| the 'e2fsprogs' package. |
| |
| Package: libcomerr2 |
| Section: libs |
| Provides: libcomerr-kth-compat |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Multi-Arch: same |
| Pre-Depends: ${misc:Pre-Depends} |
| Description: common error description library |
| libcomerr is an attempt to present a common error-handling mechanism to |
| manipulate the most common form of error code in a fashion that does not |
| have the problems identified with mechanisms commonly in use. |
| |
| Package: comerr-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}), ${misc:Depends} |
| Suggests: doc-base |
| Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) |
| Architecture: any |
| Description: common error description library - headers and static libraries |
| libcom_err is an attempt to present a common error-handling mechanism to |
| manipulate the most common form of error code in a fashion that does not |
| have the problems identified with mechanisms commonly in use. |
| . |
| This package contains the development environment for the com_err library. |
| |
| Package: libss2 |
| Section: libs |
| Depends: libcomerr2, ${shlibs:Depends}, ${misc:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Multi-Arch: same |
| Pre-Depends: ${misc:Pre-Depends} |
| Description: command-line interface parsing library |
| libss provides a simple command-line interface parser which will |
| accept input from the user, parse the command into an argv argument |
| vector, and then dispatch it to a handler function. |
| . |
| It was originally inspired by the Multics SubSystem library. |
| |
| Package: ss-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev, ${misc:Depends} |
| Architecture: any |
| Description: command-line interface parsing library - headers and static libraries |
| This package includes a tool that parses a command table to generate |
| a simple command-line interface parser, the include files needed to |
| compile and use it, and the static libs. |
| . |
| It was originally inspired by the Multics SubSystem library. |
| . |
| This package contains the development environment for the ss library. |
| |
| ifdef(`UDEB_PKGS',`` |
| Package: e2fsprogs-udeb |
| Package-Type: udeb |
| Section: debian-installer |
| Priority: optional |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Architecture: any |
| Description: stripped-down versions of e2fsprogs, for debian-installer |
| This package is an e2fsprogs package built for a reduced size, so that |
| it can help to save space in debian-installer. |
| . |
| Don'''``t attempt to install this package, it has no support for a couple of |
| features you surely want. Anyway it should refuse to install. |
| '')dnl |
| |
| Package: e2fslibs |
| Section: libs |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Provides: libext2fs2, libe2p2 |
| Architecture: any |
| Multi-Arch: same |
| Pre-Depends: ${misc:Pre-Depends} |
| Description: ext2/ext3/ext4 file system libraries |
| The ext2, ext3 and ext4 file systems are successors of the original ext |
| ("extended") file system. They are the main file system types used for |
| hard disks on Debian and other Linux systems. |
| . |
| This package provides the ext2fs and e2p libraries, for userspace software |
| that directly accesses extended file systems. Programs that use libext2fs |
| include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include |
| dumpe2fs, chattr, and lsattr. |
| |
| Package: e2fslibs-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}), ${misc:Depends} |
| Suggests: doc-base |
| Provides: ext2fs-dev, e2p-dev |
| Replaces: libkrb5-dev (<< 1.3) |
| Architecture: any |
| Description: ext2/ext3/ext4 file system libraries - headers and static libraries |
| The ext2, ext3 and ext4 file systems are successors of the original ext |
| ("extended") file system. They are the main file system types used for |
| hard disks on Debian and other Linux systems. |
| . |
| This package contains the development environment for the ext2fs and e2p |
| libraries. |
| |
| Package: e2fsprogs |
| Essential: yes |
| Pre-Depends: ${shlibs:Depends}, ${misc:Depends}, libblkid1, libuuid1 |
| Multi-Arch: foreign |
| Suggests: gpart, parted, fuse2fs, e2fsck-static, e2fsprogs-l10n |
| Architecture: any |
| Description: ext2/ext3/ext4 file system utilities |
| The ext2, ext3 and ext4 file systems are successors of the original ext |
| ("extended") file system. They are the main file system types used for |
| hard disks on Debian and other Linux systems. |
| . |
| This package contains programs for creating, checking, and maintaining |
| ext2/3/4-based file systems. It also includes the "badblocks" program, |
| which can be used to scan for bad blocks on a disk or other storage device. |
| ifdef(`USE_DBGSYM',,`` |
| Package: e2fsprogs-dbg |
| Section: debug |
| Priority: extra |
| Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for e2fsprogs |
| This package includes the debug information useful for debugging e2fsprogs |
| and its libraries, contained in the e2fsprogs and e2fsck-static packages. |
| The debug information is used for execution tracing and core |
| dump analysis. |
| |
| Package: e2fslibs-dbg |
| Section: debug |
| Priority: extra |
| Depends: e2fslibs (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for e2fslibs |
| This package includes the debug information useful for debugging the |
| ext2fs and e2p libraries, contained in the e2fslibs package. The debug |
| information is used for execution tracing and core dump analysis. |
| |
| Package: libcomerr2-dbg |
| Section: debug |
| Priority: extra |
| Depends: libcomerr2 (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for libcomerr2 |
| This package includes the debug information useful for debugging the |
| com_err library, contained in the libcomerr2 package. The debugging |
| information is used for execution tracing and core dump analysis. |
| |
| Package: libss2-dbg |
| Section: debug |
| Priority: extra |
| Depends: libss2 (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for libss2 |
| This package includes the debug information useful for debugging the |
| ss library, contained in the libss2 package. The debug information |
| is used for execution tracing and core dump analysis. |
| '')dnl |
