| #include <ctype.h> |
| #include <netlink/attr.h> |
| #include <errno.h> |
| #include <stdbool.h> |
| #include "iw.h" |
| #include "nl80211.h" |
| |
| void mac_addr_n2a(char *mac_addr, const unsigned char *arg) |
| { |
| int i, l; |
| |
| l = 0; |
| for (i = 0; i < ETH_ALEN ; i++) { |
| if (i == 0) { |
| sprintf(mac_addr+l, "%02x", arg[i]); |
| l += 2; |
| } else { |
| sprintf(mac_addr+l, ":%02x", arg[i]); |
| l += 3; |
| } |
| } |
| } |
| |
| int mac_addr_a2n(unsigned char *mac_addr, char *arg) |
| { |
| int i; |
| |
| for (i = 0; i < ETH_ALEN ; i++) { |
| int temp; |
| char *cp = strchr(arg, ':'); |
| if (cp) { |
| *cp = 0; |
| cp++; |
| } |
| if (sscanf(arg, "%x", &temp) != 1) |
| return -1; |
| if (temp < 0 || temp > 255) |
| return -1; |
| |
| mac_addr[i] = temp; |
| if (!cp) |
| break; |
| arg = cp; |
| } |
| if (i < ETH_ALEN - 1) |
| return -1; |
| |
| return 0; |
| } |
| |
| int parse_hex_mask(char *hexmask, unsigned char **result, size_t *result_len, |
| unsigned char **mask) |
| { |
| size_t len = strlen(hexmask) / 2; |
| unsigned char *result_val; |
| unsigned char *result_mask = NULL; |
| |
| int pos = 0; |
| |
| *result_len = 0; |
| |
| result_val = calloc(len + 2, 1); |
| if (!result_val) |
| goto error; |
| *result = result_val; |
| if (mask) { |
| result_mask = calloc(DIV_ROUND_UP(len, 8) + 2, 1); |
| if (!result_mask) |
| goto error; |
| *mask = result_mask; |
| } |
| |
| while (1) { |
| char *cp = strchr(hexmask, ':'); |
| if (cp) { |
| *cp = 0; |
| cp++; |
| } |
| |
| if (result_mask && (strcmp(hexmask, "-") == 0 || |
| strcmp(hexmask, "xx") == 0 || |
| strcmp(hexmask, "--") == 0)) { |
| /* skip this byte and leave mask bit unset */ |
| } else { |
| int temp, mask_pos; |
| char *end; |
| |
| temp = strtoul(hexmask, &end, 16); |
| if (*end) |
| goto error; |
| if (temp < 0 || temp > 255) |
| goto error; |
| result_val[pos] = temp; |
| |
| mask_pos = pos / 8; |
| if (result_mask) |
| result_mask[mask_pos] |= 1 << (pos % 8); |
| } |
| |
| (*result_len)++; |
| pos++; |
| |
| if (!cp) |
| break; |
| hexmask = cp; |
| } |
| |
| return 0; |
| error: |
| free(result_val); |
| free(result_mask); |
| return -1; |
| } |
| |
| unsigned char *parse_hex(char *hex, size_t *outlen) |
| { |
| unsigned char *result; |
| |
| if (parse_hex_mask(hex, &result, outlen, NULL)) |
| return NULL; |
| return result; |
| } |
| |
| static const char *ifmodes[NL80211_IFTYPE_MAX + 1] = { |
| "unspecified", |
| "IBSS", |
| "managed", |
| "AP", |
| "AP/VLAN", |
| "WDS", |
| "monitor", |
| "mesh point", |
| "P2P-client", |
| "P2P-GO", |
| "P2P-device", |
| "outside context of a BSS", |
| "NAN", |
| }; |
| |
| static char modebuf[100]; |
| |
| const char *iftype_name(enum nl80211_iftype iftype) |
| { |
| if (iftype <= NL80211_IFTYPE_MAX && ifmodes[iftype]) |
| return ifmodes[iftype]; |
| sprintf(modebuf, "Unknown mode (%d)", iftype); |
| return modebuf; |
| } |
| |
| static const char *commands[NL80211_CMD_MAX + 1] = { |
| #include "nl80211-commands.inc" |
| }; |
| |
| static char cmdbuf[100]; |
| |
| const char *command_name(enum nl80211_commands cmd) |
| { |
| if (cmd <= NL80211_CMD_MAX && commands[cmd]) |
| return commands[cmd]; |
| sprintf(cmdbuf, "Unknown command (%d)", cmd); |
| return cmdbuf; |
| } |
| |
| int ieee80211_channel_to_frequency(int chan, enum nl80211_band band) |
| { |
| /* see 802.11 17.3.8.3.2 and Annex J |
| * there are overlapping channel numbers in 5GHz and 2GHz bands */ |
| if (chan <= 0) |
| return 0; /* not supported */ |
| switch (band) { |
| case NL80211_BAND_2GHZ: |
| if (chan == 14) |
| return 2484; |
| else if (chan < 14) |
| return 2407 + chan * 5; |
| break; |
| case NL80211_BAND_5GHZ: |
| if (chan >= 182 && chan <= 196) |
| return 4000 + chan * 5; |
| else |
| return 5000 + chan * 5; |
| break; |
| case NL80211_BAND_6GHZ: |
| /* see 802.11ax D6.1 27.3.23.2 */ |
| if (chan == 2) |
| return 5935; |
| if (chan <= 253) |
| return 5950 + chan * 5; |
| break; |
| case NL80211_BAND_60GHZ: |
| if (chan < 7) |
| return 56160 + chan * 2160; |
| break; |
| default: |
| ; |
| } |
| return 0; /* not supported */ |
| } |
| |
| int ieee80211_frequency_to_channel(int freq) |
| { |
| if (freq < 1000) |
| return 0; |
| /* see 802.11-2007 17.3.8.3.2 and Annex J */ |
| if (freq == 2484) |
| return 14; |
| /* see 802.11ax D6.1 27.3.23.2 and Annex E */ |
| else if (freq == 5935) |
| return 2; |
| else if (freq < 2484) |
| return (freq - 2407) / 5; |
| else if (freq >= 4910 && freq <= 4980) |
| return (freq - 4000) / 5; |
| else if (freq < 5950) |
| return (freq - 5000) / 5; |
| else if (freq <= 45000) /* DMG band lower limit */ |
| /* see 802.11ax D6.1 27.3.23.2 */ |
| return (freq - 5950) / 5; |
| else if (freq >= 58320 && freq <= 70200) |
| return (freq - 56160) / 2160; |
| else |
| return 0; |
| } |
| |
| void print_ssid_escaped(const uint8_t len, const uint8_t *data) |
| { |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| if (isprint(data[i]) && data[i] != ' ' && data[i] != '\\') |
| printf("%c", data[i]); |
| else if (data[i] == ' ' && |
| (i != 0 && i != len -1)) |
| printf(" "); |
| else |
| printf("\\x%.2x", data[i]); |
| } |
| } |
| |
| static int hex2num(char digit) |
| { |
| if (!isxdigit(digit)) |
| return -1; |
| if (isdigit(digit)) |
| return digit - '0'; |
| return tolower(digit) - 'a' + 10; |
| } |
| |
| static int hex2byte(const char *hex) |
| { |
| int d1, d2; |
| |
| d1 = hex2num(hex[0]); |
| if (d1 < 0) |
| return -1; |
| d2 = hex2num(hex[1]); |
| if (d2 < 0) |
| return -1; |
| return (d1 << 4) | d2; |
| } |
| |
| char *hex2bin(const char *hex, char *buf) |
| { |
| char *result = buf; |
| int d; |
| |
| while (hex[0]) { |
| d = hex2byte(hex); |
| if (d < 0) |
| return NULL; |
| buf[0] = d; |
| buf++; |
| hex += 2; |
| } |
| |
| return result; |
| } |
| |
| static int parse_akm_suite(const char *cipher_str) |
| { |
| |
| if (!strcmp(cipher_str, "PSK")) |
| return 0x000FAC02; |
| if (!strcmp(cipher_str, "FT/PSK")) |
| return 0x000FAC03; |
| if (!strcmp(cipher_str, "PSK/SHA-256")) |
| return 0x000FAC06; |
| if (!strcmp(cipher_str, "SAE")) |
| return 0x000FAC08; |
| |
| return -EINVAL; |
| } |
| |
| static int parse_cipher_suite(const char *cipher_str) |
| { |
| |
| if (!strcmp(cipher_str, "TKIP")) |
| return WLAN_CIPHER_SUITE_TKIP; |
| if (!strcmp(cipher_str, "CCMP") || !strcmp(cipher_str, "CCMP-128")) |
| return WLAN_CIPHER_SUITE_CCMP; |
| if (!strcmp(cipher_str, "GCMP") || !strcmp(cipher_str, "GCMP-128")) |
| return WLAN_CIPHER_SUITE_GCMP; |
| if (!strcmp(cipher_str, "GCMP-256")) |
| return WLAN_CIPHER_SUITE_GCMP_256; |
| if (!strcmp(cipher_str, "CCMP-256")) |
| return WLAN_CIPHER_SUITE_CCMP_256; |
| return -EINVAL; |
| } |
| |
| int parse_keys(struct nl_msg *msg, char **argv[], int *argc) |
| { |
| struct nlattr *keys; |
| int i = 0; |
| bool have_default = false; |
| char *arg = **argv; |
| char keybuf[13]; |
| int pos = 0; |
| |
| if (!*argc) |
| return 1; |
| |
| if (!memcmp(&arg[pos], "psk", 3)) { |
| char psk_keybuf[32]; |
| int cipher_suite, akm_suite; |
| |
| if (*argc < 4) |
| goto explain; |
| |
| pos+=3; |
| if (arg[pos] != ':') |
| goto explain; |
| pos++; |
| |
| NLA_PUT_U32(msg, NL80211_ATTR_WPA_VERSIONS, NL80211_WPA_VERSION_2); |
| |
| if (strlen(&arg[pos]) != (sizeof(psk_keybuf) * 2) || !hex2bin(&arg[pos], psk_keybuf)) { |
| printf("Bad PSK\n"); |
| return -EINVAL; |
| } |
| |
| NLA_PUT(msg, NL80211_ATTR_PMK, 32, psk_keybuf); |
| NLA_PUT_U32(msg, NL80211_ATTR_AUTH_TYPE, NL80211_AUTHTYPE_OPEN_SYSTEM); |
| |
| *argv += 1; |
| *argc -= 1; |
| arg = **argv; |
| |
| akm_suite = parse_akm_suite(arg); |
| if (akm_suite < 0) |
| goto explain; |
| |
| NLA_PUT_U32(msg, NL80211_ATTR_AKM_SUITES, akm_suite); |
| |
| *argv += 1; |
| *argc -= 1; |
| arg = **argv; |
| |
| cipher_suite = parse_cipher_suite(arg); |
| if (cipher_suite < 0) |
| goto explain; |
| |
| NLA_PUT_U32(msg, NL80211_ATTR_CIPHER_SUITES_PAIRWISE, cipher_suite); |
| |
| *argv += 1; |
| *argc -= 1; |
| arg = **argv; |
| |
| cipher_suite = parse_cipher_suite(arg); |
| if (cipher_suite < 0) |
| goto explain; |
| |
| NLA_PUT_U32(msg, NL80211_ATTR_CIPHER_SUITE_GROUP, cipher_suite); |
| |
| *argv += 1; |
| *argc -= 1; |
| return 0; |
| } |
| |
| if (!memcmp(&arg[pos], "sae_pwd", 7)) { |
| pos += 7; |
| if (arg[pos] != ':') |
| goto explain; |
| pos++; |
| |
| NLA_PUT_U32(msg, NL80211_ATTR_WPA_VERSIONS, NL80211_WPA_VERSION_3); |
| NLA_PUT(msg, NL80211_ATTR_SAE_PASSWORD, strlen(&arg[pos]), &arg[pos]); |
| NLA_PUT_U32(msg, NL80211_ATTR_AUTH_TYPE, NL80211_AUTHTYPE_SAE); |
| NLA_PUT_U32(msg, NL80211_ATTR_AKM_SUITES, parse_akm_suite("SAE")); |
| NLA_PUT_U32(msg, NL80211_ATTR_CIPHER_SUITE_GROUP, parse_cipher_suite("CCMP")); |
| NLA_PUT_U32(msg, NL80211_ATTR_CIPHER_SUITES_PAIRWISE, parse_cipher_suite("CCMP")); |
| |
| *argv += 1; |
| *argc -= 1; |
| |
| return 0; |
| } |
| |
| NLA_PUT_FLAG(msg, NL80211_ATTR_PRIVACY); |
| |
| keys = nla_nest_start(msg, NL80211_ATTR_KEYS); |
| if (!keys) |
| return -ENOBUFS; |
| |
| do { |
| int keylen; |
| struct nlattr *key = nla_nest_start(msg, ++i); |
| char *keydata; |
| |
| arg = **argv; |
| pos = 0; |
| |
| if (!key) |
| return -ENOBUFS; |
| |
| if (arg[pos] == 'd') { |
| NLA_PUT_FLAG(msg, NL80211_KEY_DEFAULT); |
| pos++; |
| if (arg[pos] == ':') |
| pos++; |
| have_default = true; |
| } |
| |
| if (!isdigit(arg[pos])) |
| goto explain; |
| NLA_PUT_U8(msg, NL80211_KEY_IDX, arg[pos++] - '0'); |
| if (arg[pos++] != ':') |
| goto explain; |
| keydata = arg + pos; |
| switch (strlen(keydata)) { |
| case 10: |
| keydata = hex2bin(keydata, keybuf); |
| /* fall through */ |
| case 5: |
| NLA_PUT_U32(msg, NL80211_KEY_CIPHER, |
| WLAN_CIPHER_SUITE_WEP40); |
| keylen = 5; |
| break; |
| case 26: |
| keydata = hex2bin(keydata, keybuf); |
| /* fall through */ |
| case 13: |
| NLA_PUT_U32(msg, NL80211_KEY_CIPHER, |
| WLAN_CIPHER_SUITE_WEP104); |
| keylen = 13; |
| break; |
| default: |
| goto explain; |
| } |
| |
| if (!keydata) |
| goto explain; |
| |
| NLA_PUT(msg, NL80211_KEY_DATA, keylen, keydata); |
| |
| *argv += 1; |
| *argc -= 1; |
| |
| /* one key should be TX key */ |
| if (!have_default && !*argc) |
| NLA_PUT_FLAG(msg, NL80211_KEY_DEFAULT); |
| |
| nla_nest_end(msg, key); |
| } while (*argc); |
| |
| nla_nest_end(msg, keys); |
| |
| return 0; |
| nla_put_failure: |
| return -ENOBUFS; |
| explain: |
| fprintf(stderr, "key must be [d:]index:data where\n" |
| " 'd:' means default (transmit) key\n" |
| " 'index:' is a single digit (0-3)\n" |
| " 'data' must be 5 or 13 ascii chars\n" |
| " or 10 or 26 hex digits\n" |
| "for example: d:2:6162636465 is the same as d:2:abcde\n" |
| "or psk:data <AKM Suite> <pairwise CIPHER> <groupwise CIPHER> where\n" |
| " 'data' is the PSK (output of wpa_passphrase and the CIPHER can be CCMP or GCMP)\n" |
| "for example: psk:0123456789abcdef PSK CCMP CCMP\n" |
| "The allowed AKM suites are PSK, FT/PSK, PSK/SHA-256\n" |
| "The allowed Cipher suites are TKIP, CCMP, GCMP, GCMP-256, CCMP-256\n" |
| "or sae_pwd:data where 'data' is the password\n" |
| "for example: sae_pwd:foobar\n"); |
| return 2; |
| } |
| |
| enum nl80211_chan_width str_to_bw(const char *str) |
| { |
| static const struct { |
| const char *name; |
| unsigned int val; |
| } bwmap[] = { |
| { .name = "5", .val = NL80211_CHAN_WIDTH_5, }, |
| { .name = "10", .val = NL80211_CHAN_WIDTH_10, }, |
| { .name = "20", .val = NL80211_CHAN_WIDTH_20, }, |
| { .name = "40", .val = NL80211_CHAN_WIDTH_40, }, |
| { .name = "80", .val = NL80211_CHAN_WIDTH_80, }, |
| { .name = "80+80", .val = NL80211_CHAN_WIDTH_80P80, }, |
| { .name = "160", .val = NL80211_CHAN_WIDTH_160, }, |
| { .name = "320", .val = NL80211_CHAN_WIDTH_320, }, |
| }; |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bwmap); i++) { |
| if (strcasecmp(bwmap[i].name, str) == 0) |
| return bwmap[i].val; |
| } |
| |
| return NL80211_CHAN_WIDTH_20_NOHT; |
| } |
| |
| static int parse_freqs(struct chandef *chandef, int argc, char **argv, |
| int *parsed, bool freq_in_khz) |
| { |
| uint32_t freq; |
| char *end; |
| bool need_cf1 = false, need_cf2 = false; |
| |
| if (argc < 1) |
| return 0; |
| |
| chandef->width = str_to_bw(argv[0]); |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| /* First argument was not understood, give up gracefully. */ |
| return 0; |
| case NL80211_CHAN_WIDTH_20: |
| case NL80211_CHAN_WIDTH_5: |
| case NL80211_CHAN_WIDTH_10: |
| break; |
| case NL80211_CHAN_WIDTH_80P80: |
| need_cf2 = true; |
| /* fall through */ |
| case NL80211_CHAN_WIDTH_40: |
| case NL80211_CHAN_WIDTH_80: |
| case NL80211_CHAN_WIDTH_160: |
| case NL80211_CHAN_WIDTH_320: |
| need_cf1 = true; |
| break; |
| case NL80211_CHAN_WIDTH_1: |
| case NL80211_CHAN_WIDTH_2: |
| case NL80211_CHAN_WIDTH_4: |
| case NL80211_CHAN_WIDTH_8: |
| case NL80211_CHAN_WIDTH_16: |
| /* can't happen yet */ |
| break; |
| } |
| |
| *parsed += 1; |
| |
| if (!need_cf1) |
| return 0; |
| |
| if (argc < 2) |
| return 1; |
| |
| /* center freq 1 */ |
| if (!*argv[1]) |
| return 1; |
| freq = strtoul(argv[1], &end, 10); |
| if (*end) |
| return 1; |
| *parsed += 1; |
| |
| if (freq_in_khz) { |
| chandef->center_freq1 = freq / 1000; |
| chandef->center_freq1_offset = freq % 1000; |
| } else { |
| chandef->center_freq1 = freq; |
| chandef->center_freq1_offset = 0; |
| } |
| |
| if (!need_cf2) |
| return 0; |
| |
| if (argc < 3) |
| return 1; |
| |
| /* center freq 2 */ |
| if (!*argv[2]) |
| return 1; |
| freq = strtoul(argv[2], &end, 10); |
| if (*end) |
| return 1; |
| |
| if (freq_in_khz) |
| chandef->center_freq2 = freq / 1000; |
| else |
| chandef->center_freq2 = freq; |
| |
| *parsed += 1; |
| |
| return 0; |
| } |
| |
| |
| /** |
| * parse_freqchan - Parse frequency or channel definition |
| * |
| * @chandef: chandef structure to be filled in |
| * @chan: Boolean whether to parse a channel or frequency based specifier |
| * @argc: Number of arguments |
| * @argv: Array of string arguments |
| * @parsed: Pointer to return the number of used arguments, or NULL to error |
| * out if any argument is left unused. |
| * @freq_in_khz: Boolean whether to parse the frequency in kHz or default as MHz |
| * |
| * The given chandef structure will be filled in from the command line |
| * arguments. argc/argv will be updated so that further arguments from the |
| * command line can be parsed. |
| * |
| * Note that despite the fact that the function knows how many center freqs |
| * are needed, there's an ambiguity if the next argument after this is an |
| * integer argument, since the valid channel width values are interpreted |
| * as such, rather than a following argument. This can be avoided by the |
| * user by giving "NOHT" instead. |
| * |
| * The working specifier if chan is set are: |
| * <channel> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz|160MHz|320MHz] |
| * |
| * And if frequency is set: |
| * <freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz|160MHz|320MHz] |
| * <control freq> [5|10|20|40|80|80+80|160|320] [<center1_freq> [<center2_freq>]] |
| * |
| * If the mode/channel width is not given the NOHT is assumed. |
| * |
| * Return: Number of used arguments, zero or negative error number otherwise |
| */ |
| int parse_freqchan(struct chandef *chandef, bool chan, int argc, char **argv, |
| int *parsed, bool freq_in_khz) |
| { |
| char *end; |
| static const struct chanmode chanmode[] = { |
| { .name = "HT20", |
| .width = NL80211_CHAN_WIDTH_20, |
| .freq1_diff = 0, |
| .chantype = NL80211_CHAN_HT20 }, |
| { .name = "HT40+", |
| .width = NL80211_CHAN_WIDTH_40, |
| .freq1_diff = 10, |
| .chantype = NL80211_CHAN_HT40PLUS }, |
| { .name = "HT40-", |
| .width = NL80211_CHAN_WIDTH_40, |
| .freq1_diff = -10, |
| .chantype = NL80211_CHAN_HT40MINUS }, |
| { .name = "NOHT", |
| .width = NL80211_CHAN_WIDTH_20_NOHT, |
| .freq1_diff = 0, |
| .chantype = NL80211_CHAN_NO_HT }, |
| { .name = "5MHz", |
| .width = NL80211_CHAN_WIDTH_5, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "10MHz", |
| .width = NL80211_CHAN_WIDTH_10, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "80MHz", |
| .width = NL80211_CHAN_WIDTH_80, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "160MHz", |
| .width = NL80211_CHAN_WIDTH_160, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "320MHz", |
| .width = NL80211_CHAN_WIDTH_320, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "1MHz", |
| .width = NL80211_CHAN_WIDTH_1, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "2MHz", |
| .width = NL80211_CHAN_WIDTH_2, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "4MHz", |
| .width = NL80211_CHAN_WIDTH_4, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "8MHz", |
| .width = NL80211_CHAN_WIDTH_8, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| { .name = "16MHz", |
| .width = NL80211_CHAN_WIDTH_16, |
| .freq1_diff = 0, |
| .chantype = -1 }, |
| |
| }; |
| const struct chanmode *chanmode_selected = NULL; |
| unsigned int freq, freq_offset = 0; |
| unsigned int i; |
| int _parsed = 0; |
| int res = 0; |
| |
| if (argc < 1) |
| return 1; |
| |
| if (!argv[0]) |
| goto out; |
| |
| freq = strtoul(argv[0], &end, 10); |
| |
| if (freq_in_khz) { |
| freq_offset = freq % 1000; |
| freq = freq / 1000; |
| } |
| |
| if (*end) { |
| res = 1; |
| goto out; |
| } |
| |
| _parsed += 1; |
| |
| memset(chandef, 0, sizeof(struct chandef)); |
| |
| if (chan) { |
| enum nl80211_band band; |
| |
| band = freq <= 14 ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ; |
| freq = ieee80211_channel_to_frequency(freq, band); |
| } |
| chandef->control_freq = freq; |
| chandef->control_freq_offset = freq_offset; |
| /* Assume 20MHz NOHT channel for now. */ |
| chandef->center_freq1 = freq; |
| chandef->center_freq1_offset = freq_offset; |
| |
| /* Try to parse HT mode definitions */ |
| if (argc > 1) { |
| for (i = 0; i < ARRAY_SIZE(chanmode); i++) { |
| if (strcasecmp(chanmode[i].name, argv[1]) == 0) { |
| chanmode_selected = &chanmode[i]; |
| _parsed += 1; |
| break; |
| } |
| } |
| } |
| |
| /* Set channel width's default value */ |
| if (chandef->control_freq < 1000) |
| chandef->width = NL80211_CHAN_WIDTH_16; |
| else |
| chandef->width = NL80211_CHAN_WIDTH_20_NOHT; |
| |
| /* channel mode given, use it and return. */ |
| if (chanmode_selected) { |
| chandef->center_freq1 = get_cf1(chanmode_selected, freq); |
| |
| /* For non-S1G frequency */ |
| if (chandef->center_freq1 > 1000) |
| chandef->center_freq1_offset = 0; |
| |
| chandef->width = chanmode_selected->width; |
| goto out; |
| } |
| |
| /* This was a only a channel definition, only puncturing may follow */ |
| if (chan) |
| goto out; |
| |
| res = parse_freqs(chandef, argc - 1, argv + 1, &_parsed, freq_in_khz); |
| |
| out: |
| if (!freq_in_khz && argc > _parsed && strcmp(argv[_parsed], "punct") == 0) { |
| _parsed++; |
| if (argc <= _parsed) |
| return 1; |
| chandef->punctured = strtoul(argv[_parsed], &end, 10); |
| if (*end) |
| return 1; |
| _parsed++; |
| } |
| |
| /* |
| * Either this must consume all args, or users must pass a |
| * valid pointer as 'parsed' and use it to know how many of |
| * the arguments this function consumed. |
| */ |
| if (_parsed != argc && !parsed) |
| return 1; |
| |
| if (parsed) |
| *parsed = _parsed; |
| |
| return res; |
| } |
| |
| int put_chandef(struct nl_msg *msg, struct chandef *chandef) |
| { |
| NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, chandef->control_freq); |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_WIPHY_FREQ_OFFSET, |
| chandef->control_freq_offset); |
| NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH, chandef->width); |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
| NL80211_CHAN_NO_HT); |
| break; |
| case NL80211_CHAN_WIDTH_20: |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
| NL80211_CHAN_HT20); |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| if (chandef->control_freq > chandef->center_freq1) |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
| NL80211_CHAN_HT40MINUS); |
| else |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
| NL80211_CHAN_HT40PLUS); |
| break; |
| default: |
| break; |
| } |
| |
| if (chandef->center_freq1) |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_CENTER_FREQ1, |
| chandef->center_freq1); |
| |
| if (chandef->center_freq1_offset) |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_CENTER_FREQ1_OFFSET, |
| chandef->center_freq1_offset); |
| |
| if (chandef->center_freq2) |
| NLA_PUT_U32(msg, |
| NL80211_ATTR_CENTER_FREQ2, |
| chandef->center_freq2); |
| |
| if (chandef->punctured) |
| NLA_PUT_U32(msg, NL80211_ATTR_PUNCT_BITMAP, chandef->punctured); |
| |
| return 0; |
| |
| nla_put_failure: |
| return -ENOBUFS; |
| } |
| |
| static void print_mcs_index(const __u8 *mcs) |
| { |
| int mcs_bit, prev_bit = -2, prev_cont = 0; |
| |
| for (mcs_bit = 0; mcs_bit <= 76; mcs_bit++) { |
| unsigned int mcs_octet = mcs_bit/8; |
| unsigned int MCS_RATE_BIT = 1 << mcs_bit % 8; |
| bool mcs_rate_idx_set; |
| |
| mcs_rate_idx_set = !!(mcs[mcs_octet] & MCS_RATE_BIT); |
| |
| if (!mcs_rate_idx_set) |
| continue; |
| |
| if (prev_bit != mcs_bit - 1) { |
| if (prev_bit != -2) |
| printf("%d, ", prev_bit); |
| else |
| printf(" "); |
| printf("%d", mcs_bit); |
| prev_cont = 0; |
| } else if (!prev_cont) { |
| printf("-"); |
| prev_cont = 1; |
| } |
| |
| prev_bit = mcs_bit; |
| } |
| |
| if (prev_cont) |
| printf("%d", prev_bit); |
| printf("\n"); |
| } |
| |
| /* |
| * There are only 4 possible values, we just use a case instead of computing it, |
| * but technically this can also be computed through the formula: |
| * |
| * Max AMPDU length = (2 ^ (13 + exponent)) - 1 bytes |
| */ |
| static __u32 compute_ampdu_length(__u8 exponent) |
| { |
| switch (exponent) { |
| case 0: return 8191; /* (2 ^(13 + 0)) -1 */ |
| case 1: return 16383; /* (2 ^(13 + 1)) -1 */ |
| case 2: return 32767; /* (2 ^(13 + 2)) -1 */ |
| case 3: return 65535; /* (2 ^(13 + 3)) -1 */ |
| default: return 0; |
| } |
| } |
| |
| static const char *print_ampdu_space(__u8 space) |
| { |
| switch (space) { |
| case 0: return "No restriction"; |
| case 1: return "1/4 usec"; |
| case 2: return "1/2 usec"; |
| case 3: return "1 usec"; |
| case 4: return "2 usec"; |
| case 5: return "4 usec"; |
| case 6: return "8 usec"; |
| case 7: return "16 usec"; |
| default: |
| return "BUG (spacing more than 3 bits!)"; |
| } |
| } |
| |
| void print_ampdu_length(__u8 exponent) |
| { |
| __u32 max_ampdu_length; |
| |
| max_ampdu_length = compute_ampdu_length(exponent); |
| |
| if (max_ampdu_length) { |
| printf("\t\tMaximum RX AMPDU length %d bytes (exponent: 0x0%02x)\n", |
| max_ampdu_length, exponent); |
| } else { |
| printf("\t\tMaximum RX AMPDU length: unrecognized bytes " |
| "(exponent: %d)\n", exponent); |
| } |
| } |
| |
| void print_ampdu_spacing(__u8 spacing) |
| { |
| printf("\t\tMinimum RX AMPDU time spacing: %s (0x%02x)\n", |
| print_ampdu_space(spacing), spacing); |
| } |
| |
| void print_ht_capability(__u16 cap) |
| { |
| #define PRINT_HT_CAP(_cond, _str) \ |
| do { \ |
| if (_cond) \ |
| printf("\t\t\t" _str "\n"); \ |
| } while (0) |
| |
| printf("\t\tCapabilities: 0x%02x\n", cap); |
| |
| PRINT_HT_CAP((cap & BIT(0)), "RX LDPC"); |
| PRINT_HT_CAP((cap & BIT(1)), "HT20/HT40"); |
| PRINT_HT_CAP(!(cap & BIT(1)), "HT20"); |
| |
| PRINT_HT_CAP(((cap >> 2) & 0x3) == 0, "Static SM Power Save"); |
| PRINT_HT_CAP(((cap >> 2) & 0x3) == 1, "Dynamic SM Power Save"); |
| PRINT_HT_CAP(((cap >> 2) & 0x3) == 3, "SM Power Save disabled"); |
| |
| PRINT_HT_CAP((cap & BIT(4)), "RX Greenfield"); |
| PRINT_HT_CAP((cap & BIT(5)), "RX HT20 SGI"); |
| PRINT_HT_CAP((cap & BIT(6)), "RX HT40 SGI"); |
| PRINT_HT_CAP((cap & BIT(7)), "TX STBC"); |
| |
| PRINT_HT_CAP(((cap >> 8) & 0x3) == 0, "No RX STBC"); |
| PRINT_HT_CAP(((cap >> 8) & 0x3) == 1, "RX STBC 1-stream"); |
| PRINT_HT_CAP(((cap >> 8) & 0x3) == 2, "RX STBC 2-streams"); |
| PRINT_HT_CAP(((cap >> 8) & 0x3) == 3, "RX STBC 3-streams"); |
| |
| PRINT_HT_CAP((cap & BIT(10)), "HT Delayed Block Ack"); |
| |
| PRINT_HT_CAP(!(cap & BIT(11)), "Max AMSDU length: 3839 bytes"); |
| PRINT_HT_CAP((cap & BIT(11)), "Max AMSDU length: 7935 bytes"); |
| |
| /* |
| * For beacons and probe response this would mean the BSS |
| * does or does not allow the usage of DSSS/CCK HT40. |
| * Otherwise it means the STA does or does not use |
| * DSSS/CCK HT40. |
| */ |
| PRINT_HT_CAP((cap & BIT(12)), "DSSS/CCK HT40"); |
| PRINT_HT_CAP(!(cap & BIT(12)), "No DSSS/CCK HT40"); |
| |
| /* BIT(13) is reserved */ |
| |
| PRINT_HT_CAP((cap & BIT(14)), "40 MHz Intolerant"); |
| |
| PRINT_HT_CAP((cap & BIT(15)), "L-SIG TXOP protection"); |
| #undef PRINT_HT_CAP |
| } |
| |
| void print_ht_mcs(const __u8 *mcs) |
| { |
| /* As defined in 7.3.2.57.4 Supported MCS Set field */ |
| unsigned int tx_max_num_spatial_streams, max_rx_supp_data_rate; |
| bool tx_mcs_set_defined, tx_mcs_set_equal, tx_unequal_modulation; |
| |
| max_rx_supp_data_rate = (mcs[10] | ((mcs[11] & 0x3) << 8)); |
| tx_mcs_set_defined = !!(mcs[12] & (1 << 0)); |
| tx_mcs_set_equal = !(mcs[12] & (1 << 1)); |
| tx_max_num_spatial_streams = ((mcs[12] >> 2) & 3) + 1; |
| tx_unequal_modulation = !!(mcs[12] & (1 << 4)); |
| |
| if (max_rx_supp_data_rate) |
| printf("\t\tHT Max RX data rate: %d Mbps\n", max_rx_supp_data_rate); |
| /* XXX: else see 9.6.0e.5.3 how to get this I think */ |
| |
| if (tx_mcs_set_defined) { |
| if (tx_mcs_set_equal) { |
| printf("\t\tHT TX/RX MCS rate indexes supported:"); |
| print_mcs_index(mcs); |
| } else { |
| printf("\t\tHT RX MCS rate indexes supported:"); |
| print_mcs_index(mcs); |
| |
| if (tx_unequal_modulation) |
| printf("\t\tTX unequal modulation supported\n"); |
| else |
| printf("\t\tTX unequal modulation not supported\n"); |
| |
| printf("\t\tHT TX Max spatial streams: %d\n", |
| tx_max_num_spatial_streams); |
| |
| printf("\t\tHT TX MCS rate indexes supported may differ\n"); |
| } |
| } else { |
| printf("\t\tHT RX MCS rate indexes supported:"); |
| print_mcs_index(mcs); |
| printf("\t\tHT TX MCS rate indexes are undefined\n"); |
| } |
| } |
| |
| struct vht_nss_ratio { |
| bool valid; |
| int bw_20; |
| int bw_40; |
| int bw_80; |
| int bw_160; |
| int bw_80_80; |
| }; |
| |
| /* |
| * indexed by [chan_width][ext_nss_bw], ratio in 1/4 unit |
| */ |
| static const struct vht_nss_ratio nss_ratio_tbl[3][4] = { |
| { |
| /* chan_width == 0, ext_nss_bw == 0 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| }, |
| /* chan_width == 0, ext_nss_bw == 1 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| .bw_160 = 2, |
| }, |
| /* chan_width == 0, ext_nss_bw == 2 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| .bw_160 = 2, |
| .bw_80_80 = 2, |
| }, |
| /* chan_width == 0, ext_nss_bw == 3 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| .bw_160 = 3, |
| .bw_80_80 = 3, |
| }, |
| }, |
| { |
| /* chan_width == 1, ext_nss_bw == 0 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| .bw_160 = 4, |
| }, |
| /* chan_width == 1, ext_nss_bw == 1 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| .bw_160 = 4, |
| .bw_80_80 = 2, |
| }, |
| /* chan_width == 1, ext_nss_bw == 2 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| .bw_160 = 4, |
| .bw_80_80 = 3, |
| }, |
| /* chan_width == 1, ext_nss_bw == 3 */ |
| { |
| .valid = true, |
| .bw_20 = 8, |
| .bw_40 = 8, |
| .bw_80 = 8, |
| .bw_160 = 8, |
| .bw_80_80 = 1, |
| }, |
| }, |
| { |
| /* chan_width == 2, ext_nss_bw == 0 */ |
| { |
| .valid = true, |
| .bw_20 = 4, |
| .bw_40 = 4, |
| .bw_80 = 4, |
| .bw_160 = 4, |
| .bw_80_80 = 4, |
| }, |
| /* chan_width == 2, ext_nss_bw == 1 */ |
| {}, |
| /* chan_width == 2, ext_nss_bw == 2 */ |
| {}, |
| /* chan_width == 2, ext_nss_bw == 3 */ |
| { |
| .valid = true, |
| .bw_20 = 8, |
| .bw_40 = 8, |
| .bw_80 = 8, |
| .bw_160 = 4, |
| .bw_80_80 = 4, |
| }, |
| }, |
| }; |
| |
| static void print_nss_ratio_value(int ratio) |
| { |
| const char *rstr; |
| |
| switch (ratio) { |
| case 4: |
| return; |
| case 3: |
| rstr = "3/4"; |
| break; |
| case 2: |
| rstr = "1/2"; |
| break; |
| case 8: |
| rstr = "x2"; |
| break; |
| default: |
| rstr = "undef"; |
| break; |
| } |
| |
| printf("(%s NSS) ", rstr); |
| } |
| |
| static void print_nss_ratio(const char *str, bool force_show, int ratio) |
| { |
| if (!ratio) |
| return; |
| if (ratio == 4) { |
| if (force_show) |
| printf("%s ", str); |
| } else { |
| printf("%s ", str); |
| print_nss_ratio_value(ratio); |
| } |
| } |
| |
| void print_vht_info(__u32 capa, const __u8 *mcs) |
| { |
| __u16 tmp; |
| __u32 supp_chan_width, ext_nss_bw; |
| const struct vht_nss_ratio *nss_tbl; |
| int i; |
| |
| printf("\t\tVHT Capabilities (0x%.8x):\n", capa); |
| |
| #define PRINT_VHT_CAPA(_bit, _str) \ |
| do { \ |
| if (capa & BIT(_bit)) \ |
| printf("\t\t\t" _str "\n"); \ |
| } while (0) |
| |
| printf("\t\t\tMax MPDU length: "); |
| switch (capa & 3) { |
| case 0: printf("3895\n"); break; |
| case 1: printf("7991\n"); break; |
| case 2: printf("11454\n"); break; |
| case 3: printf("(reserved)\n"); |
| } |
| |
| printf("\t\t\tSupported Channel Width: "); |
| supp_chan_width = (capa >> 2) & 3; |
| ext_nss_bw = (capa >> 30) & 3; |
| nss_tbl = &nss_ratio_tbl[supp_chan_width][ext_nss_bw]; |
| |
| if (!nss_tbl->valid) |
| printf("(reserved)\n"); |
| else if (nss_tbl->bw_20 == 4 && |
| nss_tbl->bw_40 == 4 && |
| nss_tbl->bw_80 == 4 && |
| (!nss_tbl->bw_160 || nss_tbl->bw_160 == 4) && |
| (!nss_tbl->bw_80_80 || nss_tbl->bw_80_80 == 4)) { |
| /* old style print format */ |
| switch (supp_chan_width) { |
| case 0: printf("neither 160 nor 80+80\n"); break; |
| case 1: printf("160 MHz\n"); break; |
| case 2: printf("160 MHz, 80+80 MHz\n"); break; |
| } |
| } else { |
| print_nss_ratio("20MHz", false, nss_tbl->bw_20); |
| print_nss_ratio("40MHz", false, nss_tbl->bw_40); |
| print_nss_ratio("80MHz", false, nss_tbl->bw_80); |
| print_nss_ratio("160MHz", false, nss_tbl->bw_160); |
| print_nss_ratio("80+80MHz", false, nss_tbl->bw_80_80); |
| printf("\n"); |
| } |
| |
| PRINT_VHT_CAPA(4, "RX LDPC"); |
| PRINT_VHT_CAPA(5, "short GI (80 MHz)"); |
| PRINT_VHT_CAPA(6, "short GI (160/80+80 MHz)"); |
| PRINT_VHT_CAPA(7, "TX STBC"); |
| /* RX STBC */ |
| PRINT_VHT_CAPA(11, "SU Beamformer"); |
| PRINT_VHT_CAPA(12, "SU Beamformee"); |
| /* compressed steering */ |
| /* # of sounding dimensions */ |
| PRINT_VHT_CAPA(19, "MU Beamformer"); |
| PRINT_VHT_CAPA(20, "MU Beamformee"); |
| PRINT_VHT_CAPA(21, "VHT TXOP PS"); |
| PRINT_VHT_CAPA(22, "+HTC-VHT"); |
| /* max A-MPDU */ |
| /* VHT link adaptation */ |
| PRINT_VHT_CAPA(28, "RX antenna pattern consistency"); |
| PRINT_VHT_CAPA(29, "TX antenna pattern consistency"); |
| |
| printf("\t\tVHT RX MCS set:\n"); |
| tmp = mcs[0] | (mcs[1] << 8); |
| for (i = 1; i <= 8; i++) { |
| printf("\t\t\t%d streams: ", i); |
| switch ((tmp >> ((i-1)*2) ) & 3) { |
| case 0: printf("MCS 0-7\n"); break; |
| case 1: printf("MCS 0-8\n"); break; |
| case 2: printf("MCS 0-9\n"); break; |
| case 3: printf("not supported\n"); break; |
| } |
| } |
| tmp = mcs[2] | (mcs[3] << 8); |
| printf("\t\tVHT RX highest supported: %d Mbps\n", tmp & 0x1fff); |
| |
| printf("\t\tVHT TX MCS set:\n"); |
| tmp = mcs[4] | (mcs[5] << 8); |
| for (i = 1; i <= 8; i++) { |
| printf("\t\t\t%d streams: ", i); |
| switch ((tmp >> ((i-1)*2) ) & 3) { |
| case 0: printf("MCS 0-7\n"); break; |
| case 1: printf("MCS 0-8\n"); break; |
| case 2: printf("MCS 0-9\n"); break; |
| case 3: printf("not supported\n"); break; |
| } |
| } |
| tmp = mcs[6] | (mcs[7] << 8); |
| printf("\t\tVHT TX highest supported: %d Mbps\n", tmp & 0x1fff); |
| |
| printf("\t\tVHT extended NSS: %ssupported\n", |
| (tmp & (1 << 13)) ? "" : "not "); |
| } |
| |
| static void __print_he_capa(const __u16 *mac_cap, |
| const __u16 *phy_cap, |
| const __u16 *mcs_set, size_t mcs_len, |
| const __u8 *ppet, int ppet_len, |
| bool indent) |
| { |
| size_t mcs_used; |
| int i; |
| const char *pre = indent ? "\t" : ""; |
| |
| #define PRINT_HE_CAP(_var, _idx, _bit, _str) \ |
| do { \ |
| if (le16toh(_var[_idx]) & BIT(_bit)) \ |
| printf("%s\t\t\t" _str "\n", pre); \ |
| } while (0) |
| |
| #define PRINT_HE_CAP_MASK(_var, _idx, _shift, _mask, _str) \ |
| do { \ |
| if ((le16toh(_var[_idx]) >> _shift) & _mask) \ |
| printf("%s\t\t\t" _str ": %d\n", pre, \ |
| (le16toh(_var[_idx]) >> _shift) & _mask); \ |
| } while (0) |
| |
| #define PRINT_HE_MAC_CAP(...) PRINT_HE_CAP(mac_cap, __VA_ARGS__) |
| #define PRINT_HE_MAC_CAP_MASK(...) PRINT_HE_CAP_MASK(mac_cap, __VA_ARGS__) |
| #define PRINT_HE_PHY_CAP(...) PRINT_HE_CAP(phy_cap, __VA_ARGS__) |
| #define PRINT_HE_PHY_CAP0(_idx, _bit, ...) PRINT_HE_CAP(phy_cap, _idx, _bit + 8, __VA_ARGS__) |
| #define PRINT_HE_PHY_CAP_MASK(...) PRINT_HE_CAP_MASK(phy_cap, __VA_ARGS__) |
| |
| printf("%s\t\tHE MAC Capabilities (0x", pre); |
| for (i = 0; i < 6; i++) |
| printf("%02x", ((__u8 *)mac_cap)[i]); |
| printf("):\n"); |
| |
| PRINT_HE_MAC_CAP(0, 0, "+HTC HE Supported"); |
| PRINT_HE_MAC_CAP(0, 1, "TWT Requester"); |
| PRINT_HE_MAC_CAP(0, 2, "TWT Responder"); |
| PRINT_HE_MAC_CAP_MASK(0, 3, 0x3, "Dynamic BA Fragementation Level"); |
| PRINT_HE_MAC_CAP_MASK(0, 5, 0x7, "Maximum number of MSDUS Fragments"); |
| PRINT_HE_MAC_CAP_MASK(0, 8, 0x3, "Minimum Payload size of 128 bytes"); |
| PRINT_HE_MAC_CAP_MASK(0, 10, 0x3, "Trigger Frame MAC Padding Duration"); |
| PRINT_HE_MAC_CAP_MASK(0, 12, 0x7, "Multi-TID Aggregation Support"); |
| |
| PRINT_HE_MAC_CAP(1, 1, "All Ack"); |
| PRINT_HE_MAC_CAP(1, 2, "TRS"); |
| PRINT_HE_MAC_CAP(1, 3, "BSR"); |
| PRINT_HE_MAC_CAP(1, 4, "Broadcast TWT"); |
| PRINT_HE_MAC_CAP(1, 5, "32-bit BA Bitmap"); |
| PRINT_HE_MAC_CAP(1, 6, "MU Cascading"); |
| PRINT_HE_MAC_CAP(1, 7, "Ack-Enabled Aggregation"); |
| PRINT_HE_MAC_CAP(1, 9, "OM Control"); |
| PRINT_HE_MAC_CAP(1, 10, "OFDMA RA"); |
| PRINT_HE_MAC_CAP_MASK(1, 11, 0x3, "Maximum A-MPDU Length Exponent"); |
| PRINT_HE_MAC_CAP(1, 13, "A-MSDU Fragmentation"); |
| PRINT_HE_MAC_CAP(1, 14, "Flexible TWT Scheduling"); |
| PRINT_HE_MAC_CAP(1, 15, "RX Control Frame to MultiBSS"); |
| |
| PRINT_HE_MAC_CAP(2, 0, "BSRP BQRP A-MPDU Aggregation"); |
| PRINT_HE_MAC_CAP(2, 1, "QTP"); |
| PRINT_HE_MAC_CAP(2, 2, "BQR"); |
| PRINT_HE_MAC_CAP(2, 3, "SRP Responder Role"); |
| PRINT_HE_MAC_CAP(2, 4, "NDP Feedback Report"); |
| PRINT_HE_MAC_CAP(2, 5, "OPS"); |
| PRINT_HE_MAC_CAP(2, 6, "A-MSDU in A-MPDU"); |
| PRINT_HE_MAC_CAP_MASK(2, 7, 7, "Multi-TID Aggregation TX"); |
| PRINT_HE_MAC_CAP(2, 10, "HE Subchannel Selective Transmission"); |
| PRINT_HE_MAC_CAP(2, 11, "UL 2x996-Tone RU"); |
| PRINT_HE_MAC_CAP(2, 12, "OM Control UL MU Data Disable RX"); |
| |
| printf("%s\t\tHE PHY Capabilities: (0x", pre); |
| for (i = 0; i < 11; i++) |
| printf("%02x", ((__u8 *)phy_cap)[i + 1]); |
| printf("):\n"); |
| |
| PRINT_HE_PHY_CAP0(0, 1, "HE40/2.4GHz"); |
| PRINT_HE_PHY_CAP0(0, 2, "HE40/HE80/5GHz"); |
| PRINT_HE_PHY_CAP0(0, 3, "HE160/5GHz"); |
| PRINT_HE_PHY_CAP0(0, 4, "HE160/HE80+80/5GHz"); |
| PRINT_HE_PHY_CAP0(0, 5, "242 tone RUs/2.4GHz"); |
| PRINT_HE_PHY_CAP0(0, 6, "242 tone RUs/5GHz"); |
| |
| PRINT_HE_PHY_CAP_MASK(1, 0, 0xf, "Punctured Preamble RX"); |
| PRINT_HE_PHY_CAP_MASK(1, 4, 0x1, "Device Class"); |
| PRINT_HE_PHY_CAP(1, 5, "LDPC Coding in Payload"); |
| PRINT_HE_PHY_CAP(1, 6, "HE SU PPDU with 1x HE-LTF and 0.8us GI"); |
| PRINT_HE_PHY_CAP_MASK(1, 7, 0x3, "Midamble Rx Max NSTS"); |
| PRINT_HE_PHY_CAP(1, 9, "NDP with 4x HE-LTF and 3.2us GI"); |
| PRINT_HE_PHY_CAP(1, 10, "STBC Tx <= 80MHz"); |
| PRINT_HE_PHY_CAP(1, 11, "STBC Rx <= 80MHz"); |
| PRINT_HE_PHY_CAP(1, 12, "Doppler Tx"); |
| PRINT_HE_PHY_CAP(1, 13, "Doppler Rx"); |
| PRINT_HE_PHY_CAP(1, 14, "Full Bandwidth UL MU-MIMO"); |
| PRINT_HE_PHY_CAP(1, 15, "Partial Bandwidth UL MU-MIMO"); |
| |
| PRINT_HE_PHY_CAP_MASK(2, 0, 0x3, "DCM Max Constellation"); |
| PRINT_HE_PHY_CAP_MASK(2, 2, 0x1, "DCM Max NSS Tx"); |
| PRINT_HE_PHY_CAP_MASK(2, 3, 0x3, "DCM Max Constellation Rx"); |
| PRINT_HE_PHY_CAP_MASK(2, 5, 0x1, "DCM Max NSS Rx"); |
| PRINT_HE_PHY_CAP(2, 6, "Rx HE MU PPDU from Non-AP STA"); |
| PRINT_HE_PHY_CAP(2, 7, "SU Beamformer"); |
| PRINT_HE_PHY_CAP(2, 8, "SU Beamformee"); |
| PRINT_HE_PHY_CAP(2, 9, "MU Beamformer"); |
| PRINT_HE_PHY_CAP_MASK(2, 10, 0x7, "Beamformee STS <= 80MHz"); |
| PRINT_HE_PHY_CAP_MASK(2, 13, 0x7, "Beamformee STS > 80MHz"); |
| |
| PRINT_HE_PHY_CAP_MASK(3, 0, 0x7, "Sounding Dimensions <= 80MHz"); |
| PRINT_HE_PHY_CAP_MASK(3, 3, 0x7, "Sounding Dimensions > 80MHz"); |
| PRINT_HE_PHY_CAP(3, 6, "Ng = 16 SU Feedback"); |
| PRINT_HE_PHY_CAP(3, 7, "Ng = 16 MU Feedback"); |
| PRINT_HE_PHY_CAP(3, 8, "Codebook Size SU Feedback"); |
| PRINT_HE_PHY_CAP(3, 9, "Codebook Size MU Feedback"); |
| PRINT_HE_PHY_CAP(3, 10, "Triggered SU Beamforming Feedback"); |
| PRINT_HE_PHY_CAP(3, 11, "Triggered MU Beamforming Feedback"); |
| PRINT_HE_PHY_CAP(3, 12, "Triggered CQI Feedback"); |
| PRINT_HE_PHY_CAP(3, 13, "Partial Bandwidth Extended Range"); |
| PRINT_HE_PHY_CAP(3, 14, "Partial Bandwidth DL MU-MIMO"); |
| PRINT_HE_PHY_CAP(3, 15, "PPE Threshold Present"); |
| |
| PRINT_HE_PHY_CAP(4, 0, "SRP-based SR"); |
| PRINT_HE_PHY_CAP(4, 1, "Power Boost Factor ar"); |
| PRINT_HE_PHY_CAP(4, 2, "HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI"); |
| PRINT_HE_PHY_CAP_MASK(4, 3, 0x7, "Max NC"); |
| PRINT_HE_PHY_CAP(4, 6, "STBC Tx > 80MHz"); |
| PRINT_HE_PHY_CAP(4, 7, "STBC Rx > 80MHz"); |
| PRINT_HE_PHY_CAP(4, 8, "HE ER SU PPDU 4x HE-LTF 0.8us GI"); |
| PRINT_HE_PHY_CAP(4, 9, "20MHz in 40MHz HE PPDU 2.4GHz"); |
| PRINT_HE_PHY_CAP(4, 10, "20MHz in 160/80+80MHz HE PPDU"); |
| PRINT_HE_PHY_CAP(4, 11, "80MHz in 160/80+80MHz HE PPDU"); |
| PRINT_HE_PHY_CAP(4, 12, "HE ER SU PPDU 1x HE-LTF 0.8us GI"); |
| PRINT_HE_PHY_CAP(4, 13, "Midamble Rx 2x & 1x HE-LTF"); |
| PRINT_HE_PHY_CAP_MASK(4, 14, 0x3, "DCM Max BW"); |
| |
| PRINT_HE_PHY_CAP(5, 0, "Longer Than 16HE SIG-B OFDM Symbols"); |
| PRINT_HE_PHY_CAP(5, 1, "Non-Triggered CQI Feedback"); |
| PRINT_HE_PHY_CAP(5, 2, "TX 1024-QAM"); |
| PRINT_HE_PHY_CAP(5, 3, "RX 1024-QAM"); |
| PRINT_HE_PHY_CAP(5, 4, "RX Full BW SU Using HE MU PPDU with Compression SIGB"); |
| PRINT_HE_PHY_CAP(5, 5, "RX Full BW SU Using HE MU PPDU with Non-Compression SIGB"); |
| |
| mcs_used = 0; |
| for (i = 0; i < 3; i++) { |
| __u8 phy_cap_support[] = { BIT(1) | BIT(2), BIT(3), BIT(4) }; |
| char *bw[] = { "<= 80", "160", "80+80" }; |
| int j; |
| |
| if ((le16toh(phy_cap[0]) & (phy_cap_support[i] << 8)) == 0) |
| continue; |
| |
| /* Supports more, but overflow? Abort. */ |
| if ((i * 2 + 2) * sizeof(le16toh(mcs_set[0])) > mcs_len) |
| return; |
| |
| for (j = 0; j < 2; j++) { |
| int k; |
| printf("%s\t\tHE %s MCS and NSS set %s MHz\n", pre, j ? "TX" : "RX", bw[i]); |
| for (k = 0; k < 8; k++) { |
| __u16 mcs = le16toh(mcs_set[(i * 2) + j]); |
| mcs >>= k * 2; |
| mcs &= 0x3; |
| printf("%s\t\t\t%d streams: ", pre, k + 1); |
| if (mcs == 3) |
| printf("not supported\n"); |
| else |
| printf("MCS 0-%d\n", 7 + (mcs * 2)); |
| } |
| |
| } |
| mcs_used += 2 * sizeof(mcs_set[0]); |
| } |
| |
| /* Caller didn't provide ppet; infer it, if there's trailing space. */ |
| if (!ppet) { |
| ppet = (const void *)((const __u8 *)mcs_set + mcs_used); |
| if (mcs_used < mcs_len) |
| ppet_len = mcs_len - mcs_used; |
| else |
| ppet_len = 0; |
| } |
| |
| if (ppet_len && (le16toh(phy_cap[3]) & BIT(15))) { |
| printf("%s\t\tPPE Threshold ", pre); |
| for (i = 0; i < ppet_len; i++) |
| if (ppet[i]) |
| printf("0x%02x ", ppet[i]); |
| printf("\n"); |
| } |
| } |
| |
| void print_iftype_list(const char *name, const char *pfx, struct nlattr *attr) |
| { |
| struct nlattr *ift; |
| int rem; |
| |
| printf("%s:\n", name); |
| nla_for_each_nested(ift, attr, rem) |
| printf("%s * %s\n", pfx, iftype_name(nla_type(ift))); |
| } |
| |
| void print_iftype_line(struct nlattr *attr) |
| { |
| struct nlattr *ift; |
| bool first = true; |
| int rem; |
| |
| nla_for_each_nested(ift, attr, rem) { |
| if (first) |
| first = false; |
| else |
| printf(", "); |
| printf("%s", iftype_name(nla_type(ift))); |
| } |
| } |
| |
| void print_he_info(struct nlattr *nl_iftype) |
| { |
| struct nlattr *tb[NL80211_BAND_IFTYPE_ATTR_MAX + 1]; |
| __u16 mac_cap[3] = { 0 }; |
| __u16 phy_cap[6] = { 0 }; |
| __u16 mcs_set[6] = { 0 }; |
| __u8 ppet[25] = { 0 }; |
| size_t len; |
| int mcs_len = 0, ppet_len = 0; |
| |
| nla_parse(tb, NL80211_BAND_IFTYPE_ATTR_MAX, |
| nla_data(nl_iftype), nla_len(nl_iftype), NULL); |
| |
| if (!tb[NL80211_BAND_IFTYPE_ATTR_IFTYPES]) |
| return; |
| |
| printf("\t\tHE Iftypes: "); |
| print_iftype_line(tb[NL80211_BAND_IFTYPE_ATTR_IFTYPES]); |
| printf("\n"); |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC]); |
| if (len > sizeof(mac_cap)) |
| len = sizeof(mac_cap); |
| memcpy(mac_cap, |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC]), |
| len); |
| } |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]); |
| |
| if (len > sizeof(phy_cap) - 1) |
| len = sizeof(phy_cap) - 1; |
| memcpy(&((__u8 *)phy_cap)[1], |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]), |
| len); |
| } |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET]); |
| if (len > sizeof(mcs_set)) |
| len = sizeof(mcs_set); |
| memcpy(mcs_set, |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET]), |
| len); |
| mcs_len = len; |
| } |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE]); |
| if (len > sizeof(ppet)) |
| len = sizeof(ppet); |
| memcpy(ppet, |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE]), |
| len); |
| ppet_len = len; |
| } |
| |
| __print_he_capa(mac_cap, phy_cap, mcs_set, mcs_len, ppet, ppet_len, |
| true); |
| } |
| |
| static void __print_eht_capa(int band, |
| const __u8 *mac_cap, |
| const __u32 *phy_cap, |
| const __u8 *mcs_set, size_t mcs_len, |
| const __u8 *ppet, size_t ppet_len, |
| const __u16 *he_phy_cap, |
| bool from_ap, |
| bool indent) |
| { |
| unsigned int i; |
| const char *pre = indent ? "\t" : ""; |
| |
| #define PRINT_EHT_MAC_CAP(_idx, _bit, _str) \ |
| do { \ |
| if (mac_cap[_idx] & BIT(_bit)) \ |
| printf("%s\t\t\t" _str "\n", pre); \ |
| } while (0) |
| |
| #define PRINT_EHT_MAC_CAP_MASK(_idx, _shift, _mask, _str) \ |
| do { \ |
| if ((mac_cap[_idx] >> _shift) & _mask) \ |
| printf("%s\t\t\t" _str ": %d\n", pre, \ |
| (mac_cap[_idx] >> _shift) & _mask); \ |
| } while (0) |
| |
| #define PRINT_EHT_PHY_CAP(_idx, _bit, _str) \ |
| do { \ |
| if (le32toh(phy_cap[_idx]) & BIT(_bit)) \ |
| printf("%s\t\t\t" _str "\n", pre); \ |
| } while (0) |
| |
| #define PRINT_EHT_PHY_CAP_MASK(_idx, _shift, _mask, _str) \ |
| do { \ |
| if ((le32toh(phy_cap[_idx]) >> _shift) & _mask) \ |
| printf("%s\t\t\t" _str ": %d\n", pre, \ |
| (le32toh(phy_cap[_idx]) >> _shift) & _mask); \ |
| } while (0) |
| |
| printf("%s\t\tEHT MAC Capabilities (0x", pre); |
| for (i = 0; i < 2; i++) |
| printf("%02x", mac_cap[i]); |
| printf("):\n"); |
| |
| PRINT_EHT_MAC_CAP(0, 0, "EPCS Priority Access Supported"); |
| PRINT_EHT_MAC_CAP(0, 1, "EHT OM Control Supported"); |
| PRINT_EHT_MAC_CAP(0, 2, "Triggered TXOP Sharing Mode 1 Supported"); |
| PRINT_EHT_MAC_CAP(0, 3, "Triggered TXOP Sharing Mode 2 Supported"); |
| PRINT_EHT_MAC_CAP(0, 4, "Restricted TWP Supported"); |
| PRINT_EHT_MAC_CAP(0, 5, "SCS Traffic Description Supported"); |
| PRINT_EHT_MAC_CAP_MASK(0, 6, 0x3, "Maximum MPDU Length"); |
| |
| PRINT_EHT_MAC_CAP(1, 1, "Maximum A_MPDU Length Exponent Extension"); |
| PRINT_EHT_MAC_CAP(1, 2, "EHT TRS Supported"); |
| PRINT_EHT_MAC_CAP(1, 3, "TXOP Return In TXOP Sharing Mode 2 Supported"); |
| PRINT_EHT_MAC_CAP(1, 4, "Two BQRs Supported"); |
| PRINT_EHT_MAC_CAP_MASK(1, 5, 0x3, "EHT Link Adaptation Supported"); |
| |
| printf("%s\t\tEHT PHY Capabilities (0x", pre); |
| for (i = 0; i < 9; i++) |
| printf("%02x", ((__u8 *)phy_cap)[i]); |
| printf("):\n"); |
| |
| PRINT_EHT_PHY_CAP(0, 1, "320MHz in 6GHz Supported"); |
| PRINT_EHT_PHY_CAP(0, 2, "242-tone RU in BW wider than 20MHz Supported"); |
| PRINT_EHT_PHY_CAP(0, 3, "NDP With EHT-LTF And 3.2 µs GI"); |
| PRINT_EHT_PHY_CAP(0, 4, "Partial Bandwidth UL MU-MIMO"); |
| PRINT_EHT_PHY_CAP(0, 5, "SU Beamformer"); |
| PRINT_EHT_PHY_CAP(0, 6, "SU Beamformee"); |
| PRINT_EHT_PHY_CAP_MASK(0, 7, 0x7, "Beamformee SS (80MHz)"); |
| PRINT_EHT_PHY_CAP_MASK(0, 10, 0x7, "Beamformee SS (160MHz)"); |
| PRINT_EHT_PHY_CAP_MASK(0, 13, 0x7, "Beamformee SS (320MHz)"); |
| |
| PRINT_EHT_PHY_CAP_MASK(0, 16, 0x7, "Number Of Sounding Dimensions (80MHz)"); |
| PRINT_EHT_PHY_CAP_MASK(0, 19, 0x7, "Number Of Sounding Dimensions (160MHz)"); |
| PRINT_EHT_PHY_CAP_MASK(0, 22, 0x7, "Number Of Sounding Dimensions (320MHz)"); |
| PRINT_EHT_PHY_CAP(0, 25, "Ng = 16 SU Feedback"); |
| PRINT_EHT_PHY_CAP(0, 26, "Ng = 16 MU Feedback"); |
| PRINT_EHT_PHY_CAP(0, 27, "Codebook size (4, 2) SU Feedback"); |
| PRINT_EHT_PHY_CAP(0, 28, "Codebook size (7, 5) MU Feedback"); |
| PRINT_EHT_PHY_CAP(0, 29, "Triggered SU Beamforming Feedback"); |
| PRINT_EHT_PHY_CAP(0, 30, "Triggered MU Beamforming Partial BW Feedback"); |
| PRINT_EHT_PHY_CAP(0, 31, "Triggered CQI Feedback"); |
| |
| PRINT_EHT_PHY_CAP(1, 0, "Partial Bandwidth DL MU-MIMO"); |
| PRINT_EHT_PHY_CAP(1, 1, "PSR-Based SR Support"); |
| PRINT_EHT_PHY_CAP(1, 2, "Power Boost Factor Support"); |
| PRINT_EHT_PHY_CAP(1, 3, "EHT MU PPDU With 4 EHT-LTF And 0.8 µs GI"); |
| PRINT_EHT_PHY_CAP_MASK(1, 4, 0xf, "Max Nc"); |
| PRINT_EHT_PHY_CAP(1, 8, "Non-Triggered CQI Feedback"); |
| |
| PRINT_EHT_PHY_CAP(1, 9, "Tx 1024-QAM And 4096-QAM < 242-tone RU"); |
| PRINT_EHT_PHY_CAP(1, 10, "Rx 1024-QAM And 4096-QAM < 242-tone RU"); |
| PRINT_EHT_PHY_CAP(1, 11, "PPE Thresholds Present"); |
| PRINT_EHT_PHY_CAP_MASK(1, 12, 0x3, "Common Nominal Packet Padding"); |
| PRINT_EHT_PHY_CAP_MASK(1, 14, 0x1f, "Maximum Number Of Supported EHT-LTFs"); |
| PRINT_EHT_PHY_CAP_MASK(1, 19, 0xf, "Support of MCS 15"); |
| PRINT_EHT_PHY_CAP(1, 23, "Support Of EHT DUP In 6 GHz"); |
| PRINT_EHT_PHY_CAP(1, 24, "Support For 20MHz Rx NDP With Wider Bandwidth"); |
| PRINT_EHT_PHY_CAP(1, 25, "Non-OFDMA UL MU-MIMO (80MHz)"); |
| PRINT_EHT_PHY_CAP(1, 26, "Non-OFDMA UL MU-MIMO (160MHz)"); |
| PRINT_EHT_PHY_CAP(1, 27, "Non-OFDMA UL MU-MIMO (320MHz)"); |
| PRINT_EHT_PHY_CAP(1, 28, "MU Beamformer (80MHz)"); |
| PRINT_EHT_PHY_CAP(1, 29, "MU Beamformer (160MHz)"); |
| PRINT_EHT_PHY_CAP(1, 30, "MU Beamformer (320MHz)"); |
| PRINT_EHT_PHY_CAP(1, 31, "TB Sounding Feedback Rate Limit"); |
| |
| PRINT_EHT_PHY_CAP(2, 0, "Rx 1024-QAM In Wider Bandwidth DL OFDMA Supported"); |
| PRINT_EHT_PHY_CAP(2, 1, "Rx 4096-QAM In Wider Bandwidth DL OFDMA Supported"); |
| |
| if (!from_ap && |
| !(le16toh(he_phy_cap[0]) & ((BIT(1) | BIT(2) | BIT(3) | BIT(4)) << 8))) { |
| static const char * const mcs[] = { "0-7", "8-9", "10-11", "12-13" }; |
| |
| printf("%s\t\tEHT-MCS Map (20 MHz Non-AP STA) (0x", pre); |
| for (i = 0; i < mcs_len; i++) |
| printf("%02x", ((__u8 *)mcs_set)[i]); |
| printf("):\n"); |
| |
| for (i = 0; i < 4; i++) { |
| printf("%s\t\t\tRx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] & 0xf); |
| printf("%s\t\t\tTx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] >> 4); |
| } |
| } else { |
| static const char * const mcs[] = { "0-9", "10-11", "12-13"}; |
| |
| /* Bit 1 corresponds to 2.4GHz 40MHz support |
| * Bit 2 corresponds to 5/6GHz 40 and 80MHz support |
| * If no Channel Width bits are set, but we are an AP, we use |
| * this MCS logic also. |
| */ |
| if (le16toh(he_phy_cap[0]) & ((BIT(1) | BIT(2)) << 8) || |
| (from_ap && !(le16toh(he_phy_cap[0]) & |
| ((BIT(1) | BIT(2) | BIT(3) | BIT(4)) << 8)))) { |
| printf("%s\t\tEHT-MCS Map (BW <= 80) (0x", pre); |
| for (i = 0; i < 3; i++) |
| printf("%02x", ((__u8 *)mcs_set)[i]); |
| printf("):\n"); |
| |
| for (i = 0; i < 3; i++) { |
| printf("%s\t\t\tRx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] & 0xf); |
| printf("%s\t\t\tTx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] >> 4); |
| } |
| } |
| mcs_set += 3; |
| |
| if (le16toh(he_phy_cap[0]) & (BIT(3) << 8)) { |
| printf("%s\t\tEHT-MCS Map (BW = 160) (0x", pre); |
| for (i = 0; i < 3; i++) |
| printf("%02x", ((__u8 *)mcs_set)[i]); |
| printf("):\n"); |
| |
| for (i = 0; i < 3; i++) { |
| printf("%s\t\t\tRx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] & 0xf); |
| printf("%s\t\t\tTx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] >> 4); |
| } |
| } |
| |
| mcs_set += 3; |
| if (band == NL80211_BAND_6GHZ && (le32toh(phy_cap[0]) & BIT(1))) { |
| printf("%s\t\tEHT-MCS Map (BW = 320) (0x", pre); |
| for (i = 0; i < 3; i++) |
| printf("%02x", ((__u8 *)mcs_set)[i]); |
| printf("):\n"); |
| |
| for (i = 0; i < 3; i++) { |
| printf("%s\t\t\tRx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] & 0xf); |
| printf("%s\t\t\tTx Max NSS for MCS %s: %u\n", |
| pre, mcs[i], mcs_set[i] >> 4); |
| } |
| } |
| } |
| |
| if (ppet && ppet_len && (le32toh(phy_cap[1]) & BIT(11))) { |
| printf("%s\t\tEHT PPE Thresholds ", pre); |
| for (i = 0; i < ppet_len; i++) |
| if (ppet[i]) |
| printf("0x%02x ", ppet[i]); |
| printf("\n"); |
| } |
| } |
| |
| void print_eht_info(struct nlattr *nl_iftype, int band) |
| { |
| struct nlattr *tb[NL80211_BAND_IFTYPE_ATTR_MAX + 1]; |
| __u8 mac_cap[2] = { 0 }; |
| __u32 phy_cap[2] = { 0 }; |
| __u8 mcs_set[13] = { 0 }; |
| __u8 ppet[31] = { 0 }; |
| __u16 he_phy_cap[6] = { 0 }; |
| size_t len, mcs_len = 0, ppet_len = 0; |
| |
| nla_parse(tb, NL80211_BAND_IFTYPE_ATTR_MAX, |
| nla_data(nl_iftype), nla_len(nl_iftype), NULL); |
| |
| if (!tb[NL80211_BAND_IFTYPE_ATTR_IFTYPES] || |
| !tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]) |
| return; |
| |
| printf("\t\tEHT Iftypes: "); |
| print_iftype_line(tb[NL80211_BAND_IFTYPE_ATTR_IFTYPES]); |
| printf("\n"); |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]); |
| if (len > sizeof(mac_cap)) |
| len = sizeof(mac_cap); |
| memcpy(mac_cap, |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]), |
| len); |
| } |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]); |
| |
| if (len > sizeof(phy_cap)) |
| len = sizeof(phy_cap); |
| |
| memcpy(phy_cap, |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]), |
| len); |
| } |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]); |
| if (len > sizeof(mcs_set)) |
| len = sizeof(mcs_set); |
| memcpy(mcs_set, |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]), |
| len); |
| |
| // Assume that all parts of the MCS set are present |
| mcs_len = sizeof(mcs_set); |
| } |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]); |
| if (len > sizeof(ppet)) |
| len = sizeof(ppet); |
| memcpy(ppet, |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]), |
| len); |
| ppet_len = len; |
| } |
| |
| if (tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]) { |
| len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]); |
| |
| if (len > sizeof(he_phy_cap) - 1) |
| len = sizeof(he_phy_cap) - 1; |
| memcpy(&((__u8 *)he_phy_cap)[1], |
| nla_data(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]), |
| len); |
| } |
| |
| __print_eht_capa(band, mac_cap, phy_cap, mcs_set, mcs_len, ppet, ppet_len, |
| he_phy_cap, false, true); |
| } |
| |
| void print_eht_capability(const uint8_t *ie, int len, const uint8_t *he_cap, |
| bool from_ap) |
| { |
| const void *mac_cap, *phy_cap, *mcs_set, *he_phy_cap; |
| int mcs_len; |
| int i = 0; |
| |
| mac_cap = &ie[i]; |
| i += 2; |
| |
| phy_cap = &ie[i]; |
| i += 9; |
| |
| mcs_set = &ie[i]; |
| mcs_len = len - i; |
| |
| he_phy_cap = &he_cap[6]; |
| |
| __print_eht_capa(NL80211_BAND_6GHZ, mac_cap, phy_cap, mcs_set, mcs_len, |
| NULL, 0, he_phy_cap - 1, from_ap, false); |
| } |
| |
| void print_he_capability(const uint8_t *ie, int len) |
| { |
| const void *mac_cap, *phy_cap, *mcs_set; |
| int mcs_len; |
| int i = 0; |
| |
| mac_cap = &ie[i]; |
| i += 6; |
| |
| phy_cap = &ie[i]; |
| i += 11; |
| |
| mcs_set = &ie[i]; |
| mcs_len = len - i; |
| |
| __print_he_capa(mac_cap, phy_cap - 1, mcs_set, mcs_len, NULL, 0, false); |
| } |
| |
| void print_he_operation(const uint8_t *ie, int len) |
| { |
| uint8_t oper_parameters[3] = {ie[0], ie[1], ie[2] }; |
| uint8_t bss_color = ie[3]; |
| uint16_t nss_mcs_set = le16toh(*(uint16_t *)(&ie[4])); |
| uint8_t vht_oper_present = oper_parameters[1] & 0x40; |
| uint8_t co_hosted_bss_present = oper_parameters[1] & 0x80; |
| uint8_t uhb_operation_info_present = oper_parameters[2] & 0x02; |
| uint8_t offset = 6; |
| |
| printf("\t\tHE Operation Parameters: (0x%02x%02x%02x)\n", |
| oper_parameters[2], oper_parameters[1], oper_parameters[0]); |
| printf("\t\t\tDefault PE Duration: %hhu\n", oper_parameters[0] & 0x07); |
| if (oper_parameters[0] & 0x08) |
| printf("\t\t\tTWT Required\n"); |
| |
| printf("\t\t\tTXOP Duration RTS Threshold: %hu\n", |
| le16toh((*(uint16_t *)(oper_parameters))) >> 4 & 0x03ff); |
| if (oper_parameters[1] & 0x40) |
| printf("\t\t\tVHT Operation Information Present\n"); |
| |
| if (oper_parameters[1] & 0x80) |
| printf("\t\t\tCo-Hosted BSS\n"); |
| |
| if (oper_parameters[2] & 0x01) |
| printf("\t\t\tER SU Disable\n"); |
| |
| if (oper_parameters[2] & 0x02) |
| printf("\t\t\t6 GHz Operation Information Present\n"); |
| |
| printf("\t\tBSS Color: %hhu\n", bss_color & 0x3F); |
| if (bss_color & 0x40) |
| printf("\t\tPartial BSS Color\n"); |
| |
| if (bss_color & 0x80) |
| printf("\t\tBSS Color Disabled\n"); |
| |
| printf("\t\tBasic HE-MCS NSS Set: 0x%04x\n", nss_mcs_set); |
| for (int k = 0; k < 8; k++) { |
| __u16 mcs = nss_mcs_set; |
| |
| mcs >>= k * 2; |
| mcs &= 0x3; |
| printf("\t\t\t%d streams: ", k + 1); |
| if (mcs == 3) |
| printf("not supported\n"); |
| else |
| printf("MCS 0-%d\n", 7 + (mcs * 2)); |
| } |
| |
| if (vht_oper_present) { |
| if (len - offset < 3) { |
| printf("\t\tVHT Operation Info: Invalid\n"); |
| return; |
| } |
| |
| printf("\t\tVHT Operation Info: 0x%02x%02x%02x\n", |
| ie[offset + 2], ie[offset + 1], ie[offset + 0]); |
| offset += 3; |
| } |
| |
| if (co_hosted_bss_present) { |
| if (len - offset < 1) { |
| printf("\t\tMax Co-Hosted BSSID: Invalid\n"); |
| return; |
| } |
| |
| printf("\t\tMax Co-Hosted BSSID: %hhu\n", ie[offset]); |
| offset += 1; |
| } |
| |
| if (uhb_operation_info_present) { |
| if (len - offset < 5) { |
| printf("\t\t6 GHz Operation Info: Invalid\n"); |
| return; |
| } else { |
| const uint8_t control = ie[offset + 1]; |
| |
| printf("\t\t6 GHz Operation Information: 0x"); |
| for (uint8_t i = 0; i < 5; i++) |
| printf("%02x", ie[offset + i]); |
| |
| printf("\n"); |
| printf("\t\t\tPrimary Channel: %hhu\n", ie[offset]); |
| printf("\t\t\tChannel Width: "); |
| switch (control & 0x3) { |
| case 0: printf("20 MHz\n"); break; |
| case 1: printf("40 MHz\n"); break; |
| case 2: printf("80 MHz\n"); break; |
| case 3: printf("80+80 or 160 MHz\n"); break; |
| } |
| |
| if (control & 0x4) |
| printf("\t\t\tDuplicate Beacon: True\n"); |
| |
| printf("\t\t\tRegulatory Info: %hhu\n", (control >> 3) & 0xf); |
| printf("\t\t\tCenter Frequency Segment 0: %hhu\n", ie[offset+2]); |
| printf("\t\t\tCenter Frequency Segment 1: %hhu\n", ie[offset+3]); |
| printf("\t\t\tMinimum Rate: %hhu\n", ie[offset+4]); |
| } |
| } |
| } |
| |
| void print_multi_link(const uint8_t *ie, int len) |
| { |
| uint16_t eml_capa = 0; |
| uint16_t mld_capa = 0; |
| uint16_t presence_bitmap = (ie[1] << 8) | ie[0]; |
| bool link_id_info_present = presence_bitmap & 0x0010; |
| bool bss_param_change_present = presence_bitmap & 0x0020; |
| bool medium_sync_delay_present = presence_bitmap & 0x0040; |
| bool eml_capabilities_present = presence_bitmap & 0x0080; |
| bool mld_capabilities_present = presence_bitmap & 0x0100; |
| uint8_t common_info_len = ie[2] - 1; |
| uint8_t offset = 3; |
| char mld_mac[20]; |
| |
| mac_addr_n2a(mld_mac, (uint8_t *)ie + offset); |
| printf("\t\tMLD MAC: %s\n", mld_mac); |
| offset += 6; |
| |
| // Link ID Info |
| if (offset < common_info_len && link_id_info_present) { |
| printf("\t\tLink ID: %d\n", ie[offset] & 0xF); |
| offset += 1; |
| } |
| |
| // BSS Parameters Change Count |
| if (offset < common_info_len && bss_param_change_present) |
| offset += 1; |
| |
| // Medium Synchronization Delay Information |
| if (offset < common_info_len && medium_sync_delay_present) |
| offset += 2; |
| |
| // EML Capabilities |
| if (offset < common_info_len && eml_capabilities_present) { |
| eml_capa = (ie[offset + 1] << 8) | ie[offset]; |
| printf("\t\t\tEML Capabilities: 0x%04x\n", eml_capa); |
| |
| if (eml_capa & 0x0001) |
| printf("\t\t\t\tEMLSR Support\n"); |
| if (eml_capa & 0x0080) |
| printf("\t\t\t\tEMLMR Support\n"); |
| |
| offset += 2; |
| } |
| |
| // MLD Capabilities and Operations |
| if (offset < common_info_len && mld_capabilities_present) { |
| mld_capa = (ie[offset + 1] << 8) | ie[offset]; |
| printf("\t\t\tMLD Capabilities and Operations: 0x%04x\n", mld_capa); |
| |
| // This is zero-indexed (i.e. 0 means 1 simulataneous link, 1 means 2, etc) |
| printf("\t\t\t\tMaximum Number of Simultaneous Links: %d\n", mld_capa & 0xF); |
| |
| offset += 2; |
| } |
| } |
| |
| void print_eht_operation(const uint8_t *ie, int len) |
| { |
| uint8_t oper_parameters = ie[0]; |
| uint8_t disabled_subchannel_info_present = oper_parameters & 0x02; |
| uint8_t eht_operation_info_present = oper_parameters & 0x01; |
| |
| printf("\t\tEHT Operation Parameters: (0x%02x)\n", |
| oper_parameters); |
| |
| if (oper_parameters & 0x04) |
| printf("\t\t\tEHT Default PE Duration\n"); |
| |
| if (oper_parameters & 0x08) |
| printf("\t\t\tGroup Addressed BU Indication Limit\n"); |
| |
| printf("\t\t\tGroup Addressed BU Indication Exponent: 0x%01x\n", |
| (oper_parameters >> 4 & 3)); |
| |
| printf("\t\tBasic EHT-MCS And Nss Set: 0x"); |
| for (uint8_t i = 0; i < 4; i++) |
| printf("%02x", ie[1 + i]); |
| |
| printf("\n"); |
| |
| if (eht_operation_info_present) { |
| uint8_t offset = 5; |
| const uint8_t control = ie[offset]; |
| uint8_t eht_operation_info_len = 3; |
| |
| if (disabled_subchannel_info_present) |
| eht_operation_info_len += 2; |
| |
| if (len - offset < eht_operation_info_len) { |
| printf("\t\tEHT Operation Info: Invalid\n"); |
| return; |
| } |
| |
| printf("\t\tEHT Operation Info: 0x"); |
| for (uint8_t i = 0; i < eht_operation_info_len; i++) |
| printf("%02x", ie[offset + i]); |
| |
| printf("\n"); |
| printf("\t\t\tChannel Width: "); |
| switch (control & 0x7) { |
| case 0: printf("20 MHz\n"); break; |
| case 1: printf("40 MHz\n"); break; |
| case 2: printf("80 MHz\n"); break; |
| case 3: printf("160 MHz\n"); break; |
| case 4: printf("320 MHz\n"); break; |
| default: printf("invalid bandwidth (%d)\n", control & 0x7); break; |
| } |
| |
| printf("\t\t\tCenter Frequency Segment 0: %hhu\n", |
| ie[offset + 1]); |
| printf("\t\t\tCenter Frequency Segment 1: %hhu\n", |
| ie[offset + 2]); |
| |
| if (disabled_subchannel_info_present) |
| printf("\t\t\tDisabled Subchannel Bitmap: 0x%02x%02x\n", |
| ie[offset + 3], ie[offset + 4]); |
| } |
| } |
| |
| void iw_hexdump(const char *prefix, const __u8 *buf, size_t size) |
| { |
| size_t i; |
| |
| printf("%s: ", prefix); |
| for (i = 0; i < size; i++) { |
| if (i && i % 16 == 0) |
| printf("\n%s: ", prefix); |
| printf("%02x ", buf[i]); |
| } |
| printf("\n\n"); |
| } |
| |
| int get_cf1(const struct chanmode *chanmode, unsigned long freq) |
| { |
| unsigned int cf1 = freq, j; |
| unsigned int bw80[] = { 5180, 5260, 5500, 5580, 5660, 5745, |
| 5955, 6035, 6115, 6195, 6275, 6355, |
| 6435, 6515, 6595, 6675, 6755, 6835, |
| 6915, 6995 }; |
| unsigned int bw160[] = { 5180, 5500, 5955, 6115, 6275, 6435, |
| 6595, 6755, 6915 }; |
| /* based on 11be D2 E.1 Country information and operating classes */ |
| unsigned int bw320[] = {5955, 6115, 6275, 6435, 6595, 6755}; |
| |
| switch (chanmode->width) { |
| case NL80211_CHAN_WIDTH_80: |
| /* setup center_freq1 */ |
| for (j = 0; j < ARRAY_SIZE(bw80); j++) { |
| if (freq >= bw80[j] && freq < bw80[j] + 80) |
| break; |
| } |
| |
| if (j == ARRAY_SIZE(bw80)) |
| break; |
| |
| cf1 = bw80[j] + 30; |
| break; |
| case NL80211_CHAN_WIDTH_160: |
| /* setup center_freq1 */ |
| for (j = 0; j < ARRAY_SIZE(bw160); j++) { |
| if (freq >= bw160[j] && freq < bw160[j] + 160) |
| break; |
| } |
| |
| if (j == ARRAY_SIZE(bw160)) |
| break; |
| |
| cf1 = bw160[j] + 70; |
| break; |
| case NL80211_CHAN_WIDTH_320: |
| /* setup center_freq1 */ |
| for (j = 0; j < ARRAY_SIZE(bw320); j++) { |
| if (freq >= bw320[j] && freq < bw320[j] + 160) |
| break; |
| } |
| |
| if (j == ARRAY_SIZE(bw320)) |
| break; |
| |
| cf1 = bw320[j] + 150; |
| break; |
| default: |
| cf1 = freq + chanmode->freq1_diff; |
| break; |
| } |
| |
| return cf1; |
| } |
| |
| int parse_random_mac_addr(struct nl_msg *msg, char *addrs) |
| { |
| char *a_addr, *a_mask, *sep; |
| unsigned char addr[ETH_ALEN], mask[ETH_ALEN]; |
| |
| if (!*addrs) { |
| /* randomise all but the multicast bit */ |
| NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, |
| "\x00\x00\x00\x00\x00\x00"); |
| NLA_PUT(msg, NL80211_ATTR_MAC_MASK, ETH_ALEN, |
| "\x01\x00\x00\x00\x00\x00"); |
| return 0; |
| } |
| |
| if (*addrs != '=') |
| return 1; |
| |
| addrs++; |
| sep = strchr(addrs, '/'); |
| a_addr = addrs; |
| |
| if (!sep) |
| return 1; |
| |
| *sep = 0; |
| a_mask = sep + 1; |
| if (mac_addr_a2n(addr, a_addr) || mac_addr_a2n(mask, a_mask)) |
| return 1; |
| |
| NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr); |
| NLA_PUT(msg, NL80211_ATTR_MAC_MASK, ETH_ALEN, mask); |
| |
| return 0; |
| nla_put_failure: |
| return -ENOBUFS; |
| } |
| |
| char *s1g_ss_max_support(__u8 maxss) |
| { |
| switch (maxss) { |
| case 0: return "Max S1G-MCS 2"; |
| case 1: return "Max S1G-MCS 7"; |
| case 2: return "Max S1G-MCS 9"; |
| case 3: return "Not supported"; |
| default: return ""; |
| } |
| } |
| |
| char *s1g_ss_min_support(__u8 minss) |
| { |
| switch (minss) { |
| case 0: return "no minimum restriction"; |
| case 1: return "MCS 0 not recommended"; |
| case 2: return "MCS 0 and 1 not recommended"; |
| case 3: return "invalid"; |
| default: return ""; |
| } |
| } |
| |
| void print_s1g_capability(const uint8_t *caps) |
| { |
| #define PRINT_S1G_CAP(_cond, _str) \ |
| do { \ |
| if (_cond) \ |
| printf("\t\t\t" _str "\n"); \ |
| } while (0) |
| |
| static char buf[20]; |
| int offset = 0; |
| uint8_t cap = caps[0]; |
| |
| /* S1G Capabilities Information subfield */ |
| if (cap) |
| printf("\t\tByte[0]: 0x%02x\n", cap); |
| |
| PRINT_S1G_CAP((cap & BIT(0)), "S1G PHY: S1G_LONG PPDU Format"); |
| |
| if ((cap >> 1) & 0x1f) { |
| offset = sprintf(buf, "SGI support:"); |
| offset += sprintf(buf + offset, "%s", ((cap >> 1) & 0x1) ? " 1" : ""); |
| offset += sprintf(buf + offset, "%s", ((cap >> 1) & 0x2) ? " 2" : ""); |
| offset += sprintf(buf + offset, "%s", ((cap >> 1) & 0x4) ? " 4" : ""); |
| offset += sprintf(buf + offset, "%s", ((cap >> 1) & 0x8) ? " 8" : ""); |
| offset += sprintf(buf + offset, "%s", ((cap >> 1) & 0x10) ? " 16" : ""); |
| offset += sprintf(buf + offset, " MHz"); |
| printf("\t\t\t%s\n", buf); |
| } |
| |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x0, "Channel width: 1, 2 MHz"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x1, "Channel width: 1, 2, 4 MHz"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x2, "Channel width: 1, 2, 4, 8 MHz"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x3, "Channel width: 1, 2, 4, 8, 16 MHz"); |
| |
| cap = caps[1]; |
| |
| if (cap) |
| printf("\t\tByte[1]: 0x%02x\n", cap); |
| |
| PRINT_S1G_CAP((cap & BIT(0)), "Rx LDPC"); |
| PRINT_S1G_CAP((cap & BIT(1)), "Tx STBC"); |
| PRINT_S1G_CAP((cap & BIT(2)), "Rx STBC"); |
| PRINT_S1G_CAP((cap & BIT(3)), "SU Beamformer"); |
| PRINT_S1G_CAP((cap & BIT(4)), "SU Beamformee"); |
| if (cap & BIT(4)) |
| printf("\t\t\tBeamformee STS: %d\n", (cap >> 5) + 1); |
| |
| cap = caps[2]; |
| printf("\t\tByte[2]: 0x%02x\n", cap); |
| |
| if (caps[1] & BIT(3)) |
| printf("\t\t\tSounding dimensions: %d\n", (cap & 0x7) + 1); |
| |
| PRINT_S1G_CAP((cap & BIT(3)), "MU Beamformer"); |
| PRINT_S1G_CAP((cap & BIT(4)), "MU Beamformee"); |
| PRINT_S1G_CAP((cap & BIT(5)), "+HTC-VHT Capable"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x0, "No support for Traveling Pilot"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x1, "Supports 1 STS Traveling Pilot"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x3, "Supports 1 and 2 STS Traveling Pilot"); |
| |
| cap = caps[3]; |
| printf("\t\tByte[3]: 0x%02x\n", cap); |
| PRINT_S1G_CAP((cap & BIT(0)), "RD Responder"); |
| /* BIT(1) in Byte 3 or BIT(25) in all capabilities is reserved */ |
| PRINT_S1G_CAP(((cap & BIT(2)) == 0x0), "Max MPDU length: 3895 bytes"); |
| PRINT_S1G_CAP((cap & BIT(2)), "Max MPDU length: 7991 bytes"); |
| |
| if (compute_ampdu_length((cap >> 2) & 0x3)) { |
| printf("\t\t\tMaximum AMPDU length: %d bytes (exponent: 0x0%02x)\n", |
| compute_ampdu_length((cap >> 2) & 0x3), (cap >> 2) & 0x3); |
| } else { |
| printf("\t\t\tMaximum AMPDU length: unrecognized bytes (exponent: %d)\n", |
| (cap >> 2) & 0x3); |
| } |
| |
| printf("\t\t\tMinimum MPDU time spacing: %s (0x%02x)\n", |
| print_ampdu_space((cap >> 5) & 0x7), (cap >> 5) & 0x7); |
| |
| cap = caps[4]; |
| printf("\t\tByte[4]: 0x%02x\n", cap); |
| PRINT_S1G_CAP((cap & BIT(0)), "Uplink sync capable"); |
| PRINT_S1G_CAP((cap & BIT(1)), "Dynamic AID"); |
| PRINT_S1G_CAP((cap & BIT(2)), "BAT"); |
| PRINT_S1G_CAP((cap & BIT(3)), "TIM ADE"); |
| PRINT_S1G_CAP((cap & BIT(4)), "Non-TIM"); |
| PRINT_S1G_CAP((cap & BIT(5)), "Group AID"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x0, "Sensor and non-sensor STAs"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x1, "Only sensor STAs"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x2, "Only non-sensor STAs"); |
| |
| cap = caps[5]; |
| printf("\t\tByte[5]: 0x%02x\n", cap); |
| PRINT_S1G_CAP((cap & BIT(0)), "Centralized authentication control"); |
| PRINT_S1G_CAP((cap & BIT(1)), "Distributed authentication control"); |
| PRINT_S1G_CAP((cap & BIT(2)), "A-MSDU supported"); |
| PRINT_S1G_CAP((cap & BIT(3)), "A-MPDU supported"); |
| PRINT_S1G_CAP((cap & BIT(4)), "Asymmetric BA supported"); |
| PRINT_S1G_CAP((cap & BIT(5)), "Flow control supported"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x0, "Sectorization operation not supported"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x1, "TXOP-based sectorization operation"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x2, "only group sectorization operation"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x3, "Group and TXOP-based sectorization operations"); |
| |
| cap = caps[6]; |
| if (cap) |
| printf("\t\tByte[6]: 0x%02x\n", cap); |
| |
| PRINT_S1G_CAP((cap & BIT(0)), "OBSS mitigation"); |
| PRINT_S1G_CAP((cap & BIT(1)), "Fragment BA"); |
| PRINT_S1G_CAP((cap & BIT(2)), "NDP PS-Poll"); |
| PRINT_S1G_CAP((cap & BIT(3)), "RAW operation"); |
| PRINT_S1G_CAP((cap & BIT(4)), "Page slicing"); |
| PRINT_S1G_CAP((cap & BIT(5)), "TXOP sharing smplicit Ack"); |
| |
| /* Only in case +HTC-VHT Capable is 0x1 */ |
| if (caps[2] & BIT(5)) { |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x0, "Not provide VHT MFB (No Feedback)"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x2, "Provides only unsolicited VHT MFB"); |
| PRINT_S1G_CAP(((cap >> 6) & 0x3) == 0x3, |
| "Provides both feedback and unsolicited VHT MFB"); |
| } |
| |
| cap = caps[7]; |
| printf("\t\tByte[7]: 0x%02x\n", cap); |
| PRINT_S1G_CAP((cap & BIT(0)), "TACK support as PS-Poll response"); |
| PRINT_S1G_CAP((cap & BIT(1)), "Duplicate 1 MHz"); |
| PRINT_S1G_CAP((cap & BIT(2)), "MCS negotiation"); |
| PRINT_S1G_CAP((cap & BIT(3)), "1 MHz control response preamble"); |
| PRINT_S1G_CAP((cap & BIT(4)), "NDP beamforming report poll"); |
| PRINT_S1G_CAP((cap & BIT(5)), "Unsolicited dynamic AID"); |
| PRINT_S1G_CAP((cap & BIT(6)), "Sector training operation"); |
| PRINT_S1G_CAP((cap & BIT(7)), "Temporary PS mode switch"); |
| |
| cap = caps[8]; |
| if (cap) |
| printf("\t\tByte[8]: 0x%02x\n", cap); |
| |
| PRINT_S1G_CAP((cap & BIT(0)), "TWT grouping"); |
| PRINT_S1G_CAP((cap & BIT(1)), "BDT capable"); |
| printf("\t\t\tColor: %u\n", (cap >> 2) & 0x7); |
| PRINT_S1G_CAP((cap & BIT(5)), "TWT requester"); |
| PRINT_S1G_CAP((cap & BIT(6)), "TWT responder"); |
| PRINT_S1G_CAP((cap & BIT(7)), "PV1 frame support"); |
| |
| cap = caps[9]; |
| if (cap) |
| printf("\t\tByte[9]: 0x%02x\n", cap); |
| |
| PRINT_S1G_CAP((cap & BIT(0)), "Link Adaptation without NDP CMAC PPDU capable"); |
| /* Rest of byte 9 bits are reserved */ |
| |
| /* Supported S1G-MCS and NSS Set subfield */ |
| /* Rx S1G-MCS Map */ |
| cap = caps[10]; |
| printf("\t\tMax Rx S1G MCS Map: 0x%02x\n", cap); |
| printf("\t\t\tFor 1 SS: %s\n", s1g_ss_max_support(cap & 0x3)); |
| printf("\t\t\tFor 2 SS: %s\n", s1g_ss_max_support((cap >> 2) & 0x3)); |
| printf("\t\t\tFor 3 SS: %s\n", s1g_ss_max_support((cap >> 4) & 0x3)); |
| printf("\t\t\tFor 4 SS: %s\n", s1g_ss_max_support((cap >> 6) & 0x3)); |
| |
| /* Rx Long GI data rate field comprises of 9 bits */ |
| cap = caps[11]; |
| if (cap || caps[12] & 0x1) |
| printf("\t\t\tRx Highest Long GI Data Rate: %u Mbps\n", |
| cap + ((caps[12] & 0x1) << 8)); |
| |
| /* Tx S1G-MCS Map */ |
| cap = caps[12]; |
| printf("\t\tMax Tx S1G MCS Map: 0x%02x\n", cap); |
| printf("\t\t\tFor 1 SS: %s\n", s1g_ss_max_support((cap >> 1) & 0x3)); |
| printf("\t\t\tFor 2 SS: %s\n", s1g_ss_max_support((cap >> 3) & 0x3)); |
| printf("\t\t\tFor 3 SS: %s\n", s1g_ss_max_support((cap >> 5) & 0x3)); |
| printf("\t\t\tFor 4 SS: %s\n", s1g_ss_max_support(((cap >> 7) & 0x1) + |
| ((caps[13] << 1) & 0x2))); |
| |
| /* Tx Long GI data rate field comprises of 9 bits */ |
| cap = caps[13]; |
| if (((cap >> 7) & 0x7f) || (caps[14] & 0x3)) |
| printf("\t\t\tTx Highest Long GI Data Rate: %u Mbps\n", ((cap >> 7) & 0x7f) + |
| ((caps[14] & 0x3) << 7)); |
| |
| /* Rx and Tx single spatial streams and S1G MCS Map for 1 MHz */ |
| cap = (caps[15] >> 2) & 0xf; |
| PRINT_S1G_CAP((cap & 0x3) == 0x0, "Rx single SS for 1 MHz: as in Rx S1G MCS Map"); |
| PRINT_S1G_CAP((cap & 0x3) == 0x1, "Rx single SS for 1 MHz: single SS and S1G-MCS 2"); |
| PRINT_S1G_CAP((cap & 0x3) == 0x2, "Rx single SS for 1 MHz: single SS and S1G-MCS 7"); |
| PRINT_S1G_CAP((cap & 0x3) == 0x3, "Rx single SS for 1 MHz: single SS and S1G-MCS 9"); |
| cap = (cap >> 2) & 0x3; |
| PRINT_S1G_CAP((cap & 0x3) == 0x0, "Tx single SS for 1 MHz: as in Tx S1G MCS Map"); |
| PRINT_S1G_CAP((cap & 0x3) == 0x1, "Tx single SS for 1 MHz: single SS and S1G-MCS 2"); |
| PRINT_S1G_CAP((cap & 0x3) == 0x2, "Tx single SS for 1 MHz: single SS and S1G-MCS 7"); |
| PRINT_S1G_CAP((cap & 0x3) == 0x3, "Tx single SS for 1 MHz: single SS and S1G-MCS 9"); |
| /* Last 2 bits are reserved */ |
| #undef PRINT_S1G_CAP |
| } |
| |
| int parse_link_id(struct nl_msg *msg, int *argc, char ***argv) |
| { |
| unsigned int link_id; |
| char *endptr; |
| |
| if (*argc < 1) |
| return 0; |
| |
| if (strcmp((*argv)[0], "link-id") != 0) |
| return 0; |
| |
| if (*argc == 1) |
| goto usage; |
| |
| link_id = strtol((*argv)[1], &endptr, 0); |
| if (*endptr != '\0') |
| goto usage; |
| |
| *argv += 2; |
| *argc -= 2; |
| |
| NLA_PUT_U8(msg, NL80211_ATTR_MLO_LINK_ID, link_id); |
| return 0; |
| |
| usage: |
| return HANDLER_RET_USAGE; |
| |
| nla_put_failure: |
| return -ENOBUFS; |
| } |