blob: 48845dc8fa852d097d9ebb1df87b4f10758089f4 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
menu "Remoteproc drivers"
config REMOTEPROC
bool "Support for Remote Processor subsystem"
depends on HAS_DMA
select CRC32
select FW_LOADER
select VIRTIO
select WANT_DEV_COREDUMP
help
Support for remote processors (such as DSP coprocessors). These
are mainly used on embedded systems.
if REMOTEPROC
config REMOTEPROC_CDEV
bool "Remoteproc character device interface"
help
Say y here to have a character device interface for the remoteproc
framework. Userspace can boot/shutdown remote processors through
this interface.
It's safe to say N if you don't want to use this interface.
config IMX_REMOTEPROC
tristate "i.MX remoteproc support"
depends on ARCH_MXC
depends on HAVE_ARM_SMCCC
select MAILBOX
help
Say y here to support iMX's remote processors via the remote
processor framework.
It's safe to say N here.
config IMX_DSP_REMOTEPROC
tristate "i.MX DSP remoteproc support"
depends on ARCH_MXC
depends on HAVE_ARM_SMCCC
select MAILBOX
help
Say y here to support iMX's DSP remote processors via the remote
processor framework.
It's safe to say N here.
config INGENIC_VPU_RPROC
tristate "Ingenic JZ47xx VPU remoteproc support"
depends on MIPS || COMPILE_TEST
help
Say y or m here to support the VPU in the JZ47xx SoCs from Ingenic.
This can be either built-in or a loadable module.
If unsure say N.
config MTK_SCP
tristate "Mediatek SCP support"
depends on ARCH_MEDIATEK || COMPILE_TEST
select RPMSG_MTK_SCP
help
Say y here to support Mediatek's System Companion Processor (SCP) via
the remote processor framework.
It's safe to say N here.
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
depends on OMAP_IOMMU
select MAILBOX
select OMAP2PLUS_MBOX
help
Say y here to support OMAP's remote processors (dual M3
and DSP on OMAP4) via the remote processor framework.
Currently only supported on OMAP4.
Usually you want to say Y here, in order to enable multimedia
use-cases to run on your platform (multimedia codecs are
offloaded to remote DSP processors using this framework).
It's safe to say N here if you're not interested in multimedia
offloading or just want a bare minimum kernel.
config OMAP_REMOTEPROC_WATCHDOG
bool "OMAP remoteproc watchdog timer"
depends on OMAP_REMOTEPROC
default n
help
Say Y here to enable watchdog timer for remote processors.
This option controls the watchdog functionality for the remote
processors in OMAP. Dedicated OMAP DMTimers are used by the remote
processors and triggers the timer interrupt upon a watchdog
detection.
config WKUP_M3_RPROC
tristate "AMx3xx Wakeup M3 remoteproc support"
depends on SOC_AM33XX || SOC_AM43XX
help
Say y here to support Wakeup M3 remote processor on TI AM33xx
and AM43xx family of SoCs.
Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
firmware onto these remote processors.
If unsure say N.
config DA8XX_REMOTEPROC
tristate "DA8xx/OMAP-L13x remoteproc support"
depends on ARCH_DAVINCI_DA8XX
depends on DMA_CMA
help
Say y here to support DA8xx/OMAP-L13x remote processors via the
remote processor framework.
You want to say y here in order to enable AMP
use-cases to run on your platform (multimedia codecs are
offloaded to remote DSP processors using this framework).
This module controls the name of the firmware file that gets
loaded on the DSP. This file must reside in the /lib/firmware
directory. It can be specified via the module parameter
da8xx_fw_name=<filename>, and if not specified will default to
"rproc-dsp-fw".
It's safe to say n here if you're not interested in multimedia
offloading.
config KEYSTONE_REMOTEPROC
tristate "Keystone Remoteproc support"
depends on ARCH_KEYSTONE
help
Say Y here here to support Keystone remote processors (DSP)
via the remote processor framework.
It's safe to say N here if you're not interested in the Keystone
DSPs or just want to use a bare minimum kernel.
config MESON_MX_AO_ARC_REMOTEPROC
tristate "Amlogic Meson6/8/8b/8m2 AO ARC remote processor support"
depends on HAS_IOMEM
depends on (ARM && ARCH_MESON) || COMPILE_TEST
select GENERIC_ALLOCATOR
help
Say m or y here to have support for the AO ARC remote processor
on Amlogic Meson6/Meson8/Meson8b/Meson8m2 SoCs. This is
typically used for system suspend.
If unsure say N.
config PRU_REMOTEPROC
tristate "TI PRU remoteproc support"
depends on TI_PRUSS
default TI_PRUSS
help
Support for TI PRU remote processors present within a PRU-ICSS
subsystem via the remote processor framework.
Say Y or M here to support the Programmable Realtime Unit (PRU)
processors on various TI SoCs. It's safe to say N here if you're
not interested in the PRU or if you are unsure.
config QCOM_PIL_INFO
tristate
config QCOM_RPROC_COMMON
tristate
config QCOM_Q6V5_COMMON
tristate
depends on ARCH_QCOM
depends on QCOM_SMEM
config QCOM_Q6V5_ADSP
tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
select MFD_SYSCON
select QCOM_PIL_INFO
select QCOM_MDT_LOADER
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
help
Say y here to support the Peripheral Image Loader
for the non-TrustZone part of Qualcomm Technology Inc. ADSP and CDSP
remote processors. The TrustZone part is handled by QCOM_Q6V5_PAS
driver.
config QCOM_Q6V5_MSS
tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
select MFD_SYSCON
select QCOM_MDT_LOADER
select QCOM_PIL_INFO
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
select QCOM_SCM
help
Say y here to support the Qualcomm self-authenticating modem
subsystem based on Hexagon V5. The TrustZone based system is
handled by QCOM_Q6V5_PAS driver.
config QCOM_Q6V5_PAS
tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
select MFD_SYSCON
select QCOM_PIL_INFO
select QCOM_MDT_LOADER
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
select QCOM_SCM
help
Say y here to support the TrustZone based Peripheral Image Loader
for the Qualcomm Hexagon v5 based remote processors. This is commonly
used to control subsystems such as ADSP (Audio DSP),
CDSP (Compute DSP), MPSS (Modem Peripheral SubSystem), and
SLPI (Sensor Low Power Island).
config QCOM_Q6V5_WCSS
tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
select MFD_SYSCON
select QCOM_MDT_LOADER
select QCOM_PIL_INFO
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
select QCOM_SCM
help
Say y here to support the Qualcomm Peripheral Image Loader for the
Hexagon V5 based WCSS remote processors on e.g. IPQ8074. This is
a non-TrustZone wireless subsystem.
config QCOM_SYSMON
tristate "Qualcomm sysmon driver"
depends on RPMSG
depends on ARCH_QCOM
depends on NET
select QCOM_QMI_HELPERS
help
The sysmon driver implements a sysmon QMI client and a handler for
the sys_mon SMD and GLINK channel, which are used for graceful
shutdown, retrieving failure information and propagating information
about other subsystems being shut down.
Say y here if your system runs firmware on any other subsystems, e.g.
modem or DSP.
config QCOM_WCNSS_PIL
tristate "Qualcomm WCNSS Peripheral Image Loader"
depends on OF && ARCH_QCOM
depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SMEM
depends on QCOM_SYSMON || QCOM_SYSMON=n
depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
select QCOM_MDT_LOADER
select QCOM_PIL_INFO
select QCOM_RPROC_COMMON
select QCOM_SCM
help
Say y here to support the Peripheral Image Loader for loading WCNSS
firmware and boot the core on e.g. MSM8974, MSM8916. The firmware is
verified and booted with the help of the Peripheral Authentication
System (PAS) in TrustZone.
config RCAR_REMOTEPROC
tristate "Renesas R-Car Gen3 remoteproc support"
depends on ARCH_RENESAS || COMPILE_TEST
help
Say y here to support R-Car realtime processor via the
remote processor framework. An ELF firmware can be loaded
thanks to sysfs remoteproc entries. The remote processor
can be started and stopped.
This can be either built-in or a loadable module.
If compiled as module (M), the module name is rcar_rproc.
config ST_REMOTEPROC
tristate "ST remoteproc support"
depends on ARCH_STI
select MAILBOX
select STI_MBOX
help
Say y here to support ST's adjunct processors via the remote
processor framework.
This can be either built-in or a loadable module.
config ST_SLIM_REMOTEPROC
tristate
config STM32_RPROC
tristate "STM32 remoteproc support"
depends on ARCH_STM32 || COMPILE_TEST
depends on REMOTEPROC
select MAILBOX
help
Say y here to support STM32 MCU processors via the
remote processor framework.
You want to say y here in order to enable AMP
use-cases to run on your platform (dedicated firmware could be
offloaded to remote MCU processors using this framework).
This can be either built-in or a loadable module.
config TI_K3_DSP_REMOTEPROC
tristate "TI K3 DSP remoteproc support"
depends on ARCH_K3
select MAILBOX
select OMAP2PLUS_MBOX
help
Say m here to support TI's C66x and C71x DSP remote processor
subsystems on various TI K3 family of SoCs through the remote
processor framework.
It's safe to say N here if you're not interested in utilizing
the DSP slave processors.
config TI_K3_R5_REMOTEPROC
tristate "TI K3 R5 remoteproc support"
depends on ARCH_K3
select MAILBOX
select OMAP2PLUS_MBOX
help
Say m here to support TI's R5F remote processor subsystems
on various TI K3 family of SoCs through the remote processor
framework.
It's safe to say N here if you're not interested in utilizing
a slave processor.
config XLNX_R5_REMOTEPROC
tristate "Xilinx R5 remoteproc support"
depends on PM && ARCH_ZYNQMP
select ZYNQMP_FIRMWARE
select RPMSG_VIRTIO
select MAILBOX
select ZYNQMP_IPI_MBOX
help
Say y or m here to support Xilinx R5 remote processors via the remote
processor framework.
It's safe to say N if not interested in using RPU r5f cores.
endif # REMOTEPROC
endmenu