Merge tag 'tegra-for-3.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt2
Pull "ARM: tegra: Device tree changes for v3.19" from Thierry Reding:
The bulk of these changes add memory controller nodes for Tegra30,
Tegra114 and Tegra124. The memory controller implements an IOMMU that
the display controllers are attached to. This allows them to scan out
physically non-contiguous framebuffers and removes one of the primary
users of CMA.
The only other change adds a new MIPI pad control bank to the pin
controller on Tegra124. The corresponding driver patch for this went
into v3.18 as:
3ccc11f6b82c pinctrl: tegra: Add MIPI pad control
* tag 'tegra-for-3.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable IOMMU for display controllers on Tegra124
ARM: tegra: Enable IOMMU for display controllers on Tegra114
ARM: tegra: Enable IOMMU for display controllers on Tegra30
ARM: tegra: Add memory controller support for Tegra124
ARM: tegra: Add memory controller support for Tegra114
ARM: tegra: Add memory controller support for Tegra30
ARM: tegra: Add APB_MISC_GP as a MIPI pad control bank
These additional commits are merged as dependencies:
memory: Add NVIDIA Tegra memory controller support
of: Add NVIDIA Tegra memory controller binding
ARM: tegra: Move AHB Kconfig to drivers/amba
amba: Add Kconfig file
clk: tegra: Implement memory-controller clock
powerpc/iommu: Rename iommu_[un]map_sg functions
iommu: Improve error handling when setting bus iommu
iommu: Do more input validation in iommu_map_sg()
iommu: Add iommu_map_sg() function
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index c554ed3..556c866 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -92,3 +92,68 @@
- core-module: the root node to the Versatile platforms must have
a core-module with regs and the compatible strings
"arm,core-module-versatile", "syscon"
+
+ARM RealView Boards
+-------------------
+The RealView boards cover tailored evaluation boards that are used to explore
+the ARM11 and Cortex A-8 and Cortex A-9 processors.
+
+Required properties (in root node):
+ /* RealView Emulation Baseboard */
+ compatible = "arm,realview-eb";
+ /* RealView Platform Baseboard for ARM1176JZF-S */
+ compatible = "arm,realview-pb1176";
+ /* RealView Platform Baseboard for ARM11 MPCore */
+ compatible = "arm,realview-pb11mp";
+ /* RealView Platform Baseboard for Cortex A-8 */
+ compatible = "arm,realview-pba8";
+ /* RealView Platform Baseboard Explore for Cortex A-9 */
+ compatible = "arm,realview-pbx";
+
+Required nodes:
+
+- soc: some node of the RealView platforms must be the SoC
+ node that contain the SoC-specific devices, withe the compatible
+ string set to one of these tuples:
+ "arm,realview-eb-soc", "simple-bus"
+ "arm,realview-pb1176-soc", "simple-bus"
+ "arm,realview-pb11mp-soc", "simple-bus"
+ "arm,realview-pba8-soc", "simple-bus"
+ "arm,realview-pbx-soc", "simple-bus"
+
+- syscon: some subnode of the RealView SoC node must be a
+ system controller node pointing to the control registers,
+ with the compatible string set to one of these tuples:
+ "arm,realview-eb-syscon", "syscon"
+ "arm,realview-pb1176-syscon", "syscon"
+ "arm,realview-pb11mp-syscon", "syscon"
+ "arm,realview-pba8-syscon", "syscon"
+ "arm,realview-pbx-syscon", "syscon"
+
+ Required properties for the system controller:
+ - regs: the location and size of the system controller registers,
+ one range of 0x1000 bytes.
+
+Example:
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB1176 with device tree";
+ compatible = "arm,realview-pb1176";
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb1176-soc", "simple-bus";
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+ };
+
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/bcm/cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt
new file mode 100644
index 0000000..4c77169
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt
@@ -0,0 +1,31 @@
+Broadcom Cygnus device tree bindings
+------------------------------------
+
+
+Boards with Cygnus SoCs shall have the following properties:
+
+Required root node property:
+
+BCM11300
+compatible = "brcm,bcm11300", "brcm,cygnus";
+
+BCM11320
+compatible = "brcm,bcm11320", "brcm,cygnus";
+
+BCM11350
+compatible = "brcm,bcm11350", "brcm,cygnus";
+
+BCM11360
+compatible = "brcm,bcm11360", "brcm,cygnus";
+
+BCM58300
+compatible = "brcm,bcm58300", "brcm,cygnus";
+
+BCM58302
+compatible = "brcm,bcm58302", "brcm,cygnus";
+
+BCM58303
+compatible = "brcm,bcm58303", "brcm,cygnus";
+
+BCM58305
+compatible = "brcm,bcm58305", "brcm,cygnus";
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c7d2fa1..b38608a 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -17,6 +17,7 @@
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
"brcm,brahma-b15-gic"
+ "arm,arm1176jzf-devchip-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
index 904de57..a99eb9e 100644
--- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -106,11 +106,21 @@
- groups: a list of strings describing the group names.
- function: a string describing the function used to mux the groups.
+* Reset controller binding
+
+A reset controller is part of the chip control registers set. The chip control
+node also provides the reset. The register set is not at the same offset between
+Berlin SoCs.
+
+Required property:
+- #reset-cells: must be set to 2
+
Example:
chip: chip-control@ea0000 {
compatible = "marvell,berlin2-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>;
clocks = <&refclk>, <&externaldev 0>;
clock-names = "refclk", "video_ext0";
diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
index 6256ec3..2fdff5a 100644
--- a/Documentation/devicetree/bindings/arm/ste-nomadik.txt
+++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
@@ -10,6 +10,12 @@
Boards with the Nomadik SoC include:
+Nomadik NHK-15 board manufactured by ST Microelectronics:
+
+Required root node property:
+
+compatible="st,nomadik-nhk-15";
+
S8815 "MiniKit" manufactured by Calao Systems:
Required root node property:
diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
new file mode 100644
index 0000000..00d26ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
@@ -0,0 +1,34 @@
+Broadcom Cygnus Clocks
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Currently various "fixed" clocks are declared for peripheral drivers that use
+the common clock framework to reference their core clocks. Proper support of
+these clocks will be added later
+
+Device tree example:
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <25000000>;
+ };
+
+ apb_clk: apb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
new file mode 100644
index 0000000..0eb2b32
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -0,0 +1,54 @@
+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+ <chip> compatible description:
+ - sama5d4: first SoC adding the XDMAC
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+ - The 1st cell specifies the channel configuration register:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0004000 0x200>;
+ interrupts = <50 4 0>;
+ #dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8024000 0x4000>;
+ interrupts = <34 4 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(6))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index fbde415..605dcca 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,6 +56,8 @@
infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz)
isl,isl12057 Intersil ISL12057 I2C RTC Chip
+isil,isl29028 (deprecated, use isl)
+isl,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor
maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 0ef00be..43404b1 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -7,7 +7,10 @@
- "renesas,thermal-r8a73a4" (R-Mobile AP6)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- - "renesas,thermal-r8a7791" (R-Car M2)
+ - "renesas,thermal-r8a7791" (R-Car M2-W)
+ - "renesas,thermal-r8a7792" (R-Car V2H)
+ - "renesas,thermal-r8a7793" (R-Car M2-N)
+ - "renesas,thermal-r8a7794" (R-Car E2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
index d9a8d5a..ba0a34d 100644
--- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
@@ -1,4 +1,4 @@
-* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+* Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
clock inputs and programmable compare match.
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
index 7db89fb..cd5f20b 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -1,4 +1,4 @@
-* Renesas R-Car Timer Unit (TMU)
+* Renesas R-Mobile/R-Car Timer Unit (TMU)
The TMU is a 32-bit timer/counter with configurable clock inputs and
programmable compare match.
@@ -9,6 +9,8 @@
Required Properties:
- compatible: must contain one or more of the following:
+ - "renesas,tmu-r8a7740" for the r8a7740 TMU
+ - "renesas,tmu-r8a7778" for the r8a7778 TMU
- "renesas,tmu-r8a7779" for the r8a7779 TMU
- "renesas,tmu" for any TMU.
This is a fallback for the above renesas,tmu-* entries
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 723999d..bfbd93e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -77,6 +77,7 @@
intel Intel Corporation
intercontrol Inter Control Group
isee ISEE 2007 S.L.
+isil Intersil (deprecated, use isl)
isl Intersil
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4c81a86..479f332 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3621,7 +3621,7 @@
usb-storage.delay_use=
[UMS] The delay in seconds before a new device is
- scanned for Logical Units (default 5).
+ scanned for Logical Units (default 1).
usb-storage.quirks=
[UMS] A list of quirks entries to supplement or
diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt
index eeb11a2..e5a940e 100644
--- a/Documentation/video4linux/vivid.txt
+++ b/Documentation/video4linux/vivid.txt
@@ -221,12 +221,11 @@
key, not quality.
multiplanar: select whether each device instance supports multi-planar formats,
- and thus the V4L2 multi-planar API. By default the first device instance
- is single-planar, the second multi-planar, and it keeps alternating.
+ and thus the V4L2 multi-planar API. By default device instances are
+ single-planar.
This module option can override that for each instance. Values are:
- 0: use alternating single and multi-planar devices.
1: this is a single-planar instance.
2: this is a multi-planar instance.
@@ -975,9 +974,8 @@
0 otherwise.
The driver has to be configured to support the multiplanar formats. By default
-the first driver instance is single-planar, the second is multi-planar, and it
-keeps alternating. This can be changed by setting the multiplanar module option,
-see section 1 for more details on that option.
+the driver instances are single-planar. This can be changed by setting the
+multiplanar module option, see section 1 for more details on that option.
If the driver instance is using the multiplanar formats/API, then the first
single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
@@ -1021,7 +1019,7 @@
to see the blended framebuffer overlay that's being written to by the second
instance. This setup would require the following commands:
- $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1
+ $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
$ v4l2-ctl -d1 --find-fb
/dev/fb1 is the framebuffer associated with base address 0x12800000
$ sudo v4l2-ctl -d2 --set-fbuf fb=1
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c64271..2b87aee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1543,6 +1543,7 @@
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
+R: Sören Brinkmann <soren.brinkmann@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://wiki.xilinx.com
T: git git://git.xilinx.com/linux-xlnx.git
@@ -1713,6 +1714,13 @@
F: drivers/dma/at_hdmac_regs.h
F: include/linux/platform_data/dma-atmel.h
+ATMEL XDMA DRIVER
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
+L: linux-arm-kernel@lists.infradead.org
+L: dmaengine@vger.kernel.org
+S: Supported
+F: drivers/dma/at_xdmac.c
+
ATMEL I2C DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-i2c@vger.kernel.org
@@ -2071,8 +2079,9 @@
BROADCOM BCM2835 ARM ARCHITECTURE
M: Stephen Warren <swarren@wwwdotorg.org>
+M: Lee Jones <lee@kernel.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
@@ -7179,6 +7188,7 @@
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
@@ -8483,7 +8493,6 @@
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
M: Kevin Hilman <khilman@deeprootsystems.com>
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Supported
@@ -8493,7 +8502,6 @@
TI DAVINCI SERIES MEDIA DRIVER
M: Lad, Prabhakar <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
@@ -9703,11 +9711,6 @@
F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
-USB/IP DRIVERS
-L: linux-usb@vger.kernel.org
-S: Orphan
-F: drivers/staging/usbip/
-
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
diff --git a/Makefile b/Makefile
index ffc1ce2..bc7eb6a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 18
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Diseased Newt
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 03dc4c1..d8f6a2e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1187,7 +1187,7 @@
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
- default 0xf2100000 if DEBUG_PXA_UART1
+ default 0xf6200000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89ca..2b093f1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -54,8 +54,12 @@
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
+ bcm911360k.dtb \
+ bcm958300k.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
bcm21664-garnet.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
@@ -81,6 +85,7 @@
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
@@ -104,6 +109,7 @@
kirkwood-d2net.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
+ kirkwood-dir665.dtb \
kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
@@ -274,7 +280,8 @@
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
+dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \
+ ste-nomadik-nhk15.dtb
dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
nspire-tp.dtb \
nspire-clp.dtb
@@ -302,7 +309,9 @@
omap3-ha.dtb \
omap3-ha-lcd.dtb \
omap3-igep0020.dtb \
+ omap3-igep0020-rev-f.dtb \
omap3-igep0030.dtb \
+ omap3-igep0030-rev-g.dtb \
omap3-ldp.dtb \
omap3-lilly-dbb056.dtb \
omap3-n900.dtb \
@@ -347,6 +356,7 @@
omap5-sbc-t54.dtb \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
+ am57xx-beagle-x15.dtb \
dra72-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
@@ -363,6 +373,7 @@
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3188-radxarock.dtb \
@@ -376,25 +387,25 @@
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
+ r8a73a4-ape6evm.dtb \
+ r8a73a4-ape6evm-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
r8a7779-marzen.dtb \
- r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
+ r8a7791-koelsch.dtb \
+ sh7372-mackerel.dtb \
sh73a0-kzm9g.dtb \
- sh73a0-kzm9g-reference.dtb \
- r8a73a4-ape6evm.dtb \
- r8a73a4-ape6evm-reference.dtb \
- sh7372-mackerel.dtb
+ sh73a0-kzm9g-reference.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a7740-armadillo800eva.dtb \
+ r8a7779-marzen.dtb \
+ r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
- r8a7790-lager.dtb \
- r8a7779-marzen.dtb \
r8a7794-alt.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
@@ -495,7 +506,8 @@
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
- armada-370-rd.dtb
+ armada-370-rd.dtb \
+ armada-370-synology-ds213j.dtb
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
@@ -508,7 +520,8 @@
armada-xp-lenovo-ix4-300d.dtb \
armada-xp-matrix.dtb \
armada-xp-netgear-rn2120.dtb \
- armada-xp-openblocks-ax3-4.dtb
+ armada-xp-openblocks-ax3-4.dtb \
+ armada-xp-synology-ds414.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e2156a5..43a536c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -437,9 +437,9 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index a1a0cc5..c0e1135 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -126,10 +126,10 @@
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-width = <1>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 8318105..62bf053 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -204,6 +204,8 @@
reg = <0x44e09000 0x2000>;
interrupts = <72>;
status = "disabled";
+ dmas = <&edma 26>, <&edma 27>;
+ dma-names = "tx", "rx";
};
uart1: serial@48022000 {
@@ -213,6 +215,8 @@
reg = <0x48022000 0x2000>;
interrupts = <73>;
status = "disabled";
+ dmas = <&edma 28>, <&edma 29>;
+ dma-names = "tx", "rx";
};
uart2: serial@48024000 {
@@ -222,6 +226,8 @@
reg = <0x48024000 0x2000>;
interrupts = <74>;
status = "disabled";
+ dmas = <&edma 30>, <&edma 31>;
+ dma-names = "tx", "rx";
};
uart3: serial@481a6000 {
@@ -356,6 +362,7 @@
reg = <0x480C8000 0x200>;
interrupts = <77>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 46660ff..4367f75 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -168,6 +168,7 @@
reg = <0x480C8000 0x200>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ac3e485..bb4cb85 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -438,9 +438,9 @@
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
new file mode 100644
index 0000000..49edbda
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -0,0 +1,405 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15";
+ compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ rtc0 = &mcp_rtc;
+ rtc1 = &tps659038_rtc;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ vin-supply = <®en1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ /* TPS51200 */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ vin-supply = <&smps3_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ led@0 {
+ label = "beagle-x15:usr0";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "beagle-x15:usr1";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "beagle-x15:usr2";
+ gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "beagle-x15:usr3";
+ gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ide-disk";
+ default-state = "off";
+ };
+ };
+};
+
+&dra7_pmx_core {
+ leds_pins_default: leds_pins_default {
+ pinctrl-single,pins = <
+ 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
+ 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
+ 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
+ 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
+ >;
+ };
+
+ i2c1_pins_default: i2c1_pins_default {
+ pinctrl-single,pins = <
+ 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ >;
+ };
+
+ i2c3_pins_default: i2c3_pins_default {
+ pinctrl-single,pins = <
+ 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ >;
+ };
+
+ uart3_pins_default: uart3_pins_default {
+ pinctrl-single,pins = <
+ 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
+ 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ tps659038_pins_default: tps659038_pins_default {
+ pinctrl-single,pins = <
+ 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ >;
+ };
+
+ tmp102_pins_default: tmp102_pins_default {
+ pinctrl-single,pins = <
+ 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
+ >;
+ };
+
+ mcp79410_pins_default: mcp79410_pins_default {
+ pinctrl-single,pins = <
+ 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps659038_pins_default>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_CORE */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS7 unused */
+
+ smps8_reg: smps8 {
+ /* VDD_1V8 */
+ regulator-name = "smps8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS9 unused */
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_SHV5 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ regen1: regen1 {
+ /* VDD_3V3_ON */
+ regulator-name = "regen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659038_rtc: tps659038_rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&tps659038>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+ };
+
+ tmp102: tmp102@48 {
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tmp102_pins_default>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_default>;
+ clock-frequency = <400000>;
+
+ mcp_rtc: rtc@6f {
+ compatible = "microchip,mcp7941x";
+ reg = <0x6f>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcp79410_pins_default>;
+
+ vcc-supply = <&vdd_3v3>;
+ wakeup-source;
+ };
+};
+
+&gpio7 {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
+
+&cpu0 {
+ cpu0-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x248>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ vmmc_aux-supply = <&vdd_3v3>;
+ pbias-supply = <&pbias_mmc_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+ cap-mmc-dual-data-rate;
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
new file mode 100644
index 0000000..ff26c7e
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -0,0 +1,412 @@
+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB1176";
+ compatible = "arm,realview-pb1176";
+
+ chosen { };
+
+ aliases {
+ serial0 = &pb1176_serial0;
+ serial1 = &pb1176_serial1;
+ serial2 = &pb1176_serial2;
+ serial3 = &pb1176_serial3;
+ serial4 = &fpga_serial;
+ };
+
+ memory {
+ /* 128 MiB memory @ 0x0 */
+ reg = <0x00000000 0x08000000>;
+ };
+
+ /* The voltage to the MMC card is hardwired at 3.3V */
+ vmmc: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ mclk: mclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ kmiclk: kmiclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ sspclk: sspclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb1176-soc", "simple-bus";
+ regmap = <&syscon>;
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-pb1176-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+ };
+
+ /* Primary DevChip GIC synthesized with the CPU */
+ intc_dc1176: interrupt-controller@10120000 {
+ compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10121000 0x1000>,
+ <0x10120000 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l220-cache";
+ reg = <0x10110000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ /*
+ * Override default cache size, sets and
+ * associativity as these may be erroneously set
+ * up by boot loader(s).
+ */
+ arm,override-auxreg;
+ cache-size = <131072>; // 128kB
+ cache-sets = <512>;
+ cache-line-size = <32>;
+ };
+
+ pmu {
+ compatible = "arm,arm1176-pmu";
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer01: timer@10104000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10104000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer23: timer@10105000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10105000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ pb1176_rtc: rtc@10108000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10108000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ pb1176_gpio0: gpio@1010a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x1010a000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ pb1176_ssp: ssp@1010b000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1010b000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sspclk>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
+ };
+
+ pb1176_serial0: serial@1010c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010c000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial1: serial@1010d000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010d000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial2: serial@1010e000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010e000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial3: serial@1010f000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010f000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+ };
+
+ /* These peripherals are inside the FPGA rather than the DevChip */
+ fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ fpga_mci: mmcsd@10005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x10005000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>;
+ /* Due to frequent FIFO overruns, use just 500 kHz */
+ max-frequency = <500000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ clocks = <&mclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ vmmc-supply = <&vmmc>;
+ cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ fpga_kmi0: kmi@10006000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10006000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ fpga_kmi1: kmi@10007000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10007000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ fpga_charlcd: charlcd@10008000 {
+ compatible = "arm,versatile-lcd";
+ reg = <0x10008000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ fpga_serial: serial@10009000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x10009000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ /* This GIC on the board is cascaded off the DevChip GIC */
+ intc_fpga1176: interrupt-controller@10040000 {
+ compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10041000 0x1000>,
+ <0x10040000 0x100>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ fpga_gpio0: gpio@10014000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10014000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ fpga_gpio1: gpio@10015000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10015000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ fpga_rtc: rtc@10017000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10017000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index a495e58..1466580 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -75,6 +75,7 @@
clock-frequency = <100000>;
status = "okay";
audio_codec: audio-codec@4a {
+ #sound-dai-cells = <0>;
compatible = "cirrus,cs42l51";
reg = <0x4a>;
};
@@ -102,30 +103,6 @@
broken-cd;
};
- pinctrl {
- /*
- * These pins might be muxed as I2S by
- * the bootloader, but it conflicts
- * with the real I2S pins that are
- * muxed using i2s_pins. We must mux
- * those pins to a function other than
- * I2S.
- */
- pinctrl-0 = <&hog_pins1 &hog_pins2>;
- pinctrl-names = "default";
-
- hog_pins1: hog-pins1 {
- marvell,pins = "mpp6", "mpp8", "mpp10",
- "mpp12", "mpp13";
- marvell,function = "gpio";
- };
-
- hog_pins2: hog-pins2 {
- marvell,pins = "mpp5", "mpp7", "mpp9";
- marvell,function = "gpo";
- };
- };
-
usb@50000 {
status = "okay";
};
@@ -135,6 +112,8 @@
};
spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins2>;
+ pinctrl-names = "default";
status = "okay";
spi-flash@0 {
@@ -167,17 +146,84 @@
};
sound {
- compatible = "marvell,a370db-audio";
- marvell,audio-controller = <&audio_controller>;
- marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
- status = "okay";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Armada 370 DB Audio";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Headphone", "Out Jack",
+ "Line", "In Jack";
+ simple-audio-card,routing =
+ "Out Jack", "HPL",
+ "Out Jack", "HPR",
+ "AIN1L", "In Jack",
+ "AIN1L", "In Jack";
+ status = "okay";
+
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 0>;
+ };
+
+ codec {
+ sound-dai = <&audio_codec>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 1>;
+ };
+
+ codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ simple-audio-card,dai-link@2 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 1>;
+ };
+
+ codec {
+ sound-dai = <&spdif_in>;
+ };
+ };
};
spdif_out: spdif-out {
- compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
};
spdif_in: spdif-in {
- compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dir";
+ };
+};
+
+&pinctrl {
+ /*
+ * These pins might be muxed as I2S by
+ * the bootloader, but it conflicts
+ * with the real I2S pins that are
+ * muxed using i2s_pins. We must mux
+ * those pins to a function other than
+ * I2S.
+ */
+ pinctrl-0 = <&hog_pins1 &hog_pins2>;
+ pinctrl-names = "default";
+
+ hog_pins1: hog-pins1 {
+ marvell,pins = "mpp6", "mpp8", "mpp10",
+ "mpp12", "mpp13";
+ marvell,function = "gpio";
+ };
+
+ hog_pins2: hog-pins2 {
+ marvell,pins = "mpp5", "mpp7", "mpp9";
+ marvell,function = "gpo";
};
};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 2b6d24e..e1b0eb6 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -54,18 +54,6 @@
status = "okay";
};
- pinctrl {
- pwr_led_pin: pwr-led-pin {
- marvell,pins = "mpp63";
- marvell,function = "gpo";
- };
-
- stat_led_pins: stat-led-pins {
- marvell,pins = "mpp64", "mpp65";
- marvell,function = "gpio";
- };
- };
-
gpio_leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -169,3 +157,16 @@
};
};
};
+
+&pinctrl {
+ pwr_led_pin: pwr-led-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ stat_led_pins: stat-led-pins {
+ marvell,pins = "mpp64", "mpp65";
+ marvell,function = "gpio";
+ };
+};
+
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 3aebd93..4e24932 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -35,7 +35,7 @@
pcie-controller {
status = "okay";
- /* Connected to Marvell SATA controller */
+ /* Connected to Marvell 88SE9170 SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
@@ -53,53 +53,12 @@
status = "okay";
};
+ /* eSATA interface */
sata@a0000 {
- nr-ports = <2>;
+ nr-ports = <1>;
status = "okay";
};
- pinctrl {
- power_led_pin: power-led-pin {
- marvell,pins = "mpp57";
- marvell,function = "gpio";
- };
-
- sata1_led_pin: sata1-led-pin {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- sata2_led_pin: sata2-led-pin {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- backup_led_pin: backup-led-pin {
- marvell,pins = "mpp56";
- marvell,function = "gpio";
- };
-
- backup_button_pin: backup-button-pin {
- marvell,pins = "mpp58";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- poweroff: poweroff {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
- };
-
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
@@ -204,20 +163,20 @@
default-state = "keep";
};
- green-sata1-led {
- label = "rn102:green:sata1";
+ blue-sata1-led {
+ label = "rn102:blue:sata1";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green-sata2-led {
- label = "rn102:green:sata2";
+ blue-sata2-led {
+ label = "rn102:blue:sata2";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green-backup-led {
- label = "rn102:green:backup";
+ blue-backup-led {
+ label = "rn102:blue:backup";
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "on";
};
@@ -256,3 +215,45 @@
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+
+ sata1_led_pin: sata1-led-pin {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ sata2_led_pin: sata2-led-pin {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ poweroff: poweroff {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index c2f414b..30586e47 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -53,38 +53,6 @@
status = "okay";
};
- pinctrl {
- poweroff: poweroff {
- marvell,pins = "mpp60";
- marvell,function = "gpio";
- };
-
- backup_button_pin: backup-button-pin {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
-
- backup_led_pin: backup-led-pin {
- marvell,pins = "mpp63";
- marvell,function = "gpo";
- };
-
- power_led_pin: power-led-pin {
- marvell,pins = "mpp64";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp65";
- marvell,function = "gpio";
- };
- };
-
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
@@ -269,3 +237,35 @@
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ poweroff: poweroff {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index f57a8f84..3943089 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -59,18 +59,6 @@
};
internal-regs {
- pinctrl {
- fan_pins: fan-pins {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- led_pins: led-pins {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
- };
-
serial@12000 {
status = "okay";
};
@@ -85,10 +73,6 @@
phy0: ethernet-phy@0 {
reg = <0>;
};
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
ethernet@70000 {
@@ -100,8 +84,11 @@
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
- phy = <&phy1>;
phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
mvsdio@d4000 {
@@ -173,4 +160,56 @@
};
};
};
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð1>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
};
+
+&pinctrl {
+ fan_pins: fan-pins {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ led_pins: led-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
new file mode 100644
index 0000000..70fecde
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -0,0 +1,316 @@
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+ model = "Synology DS213j";
+ compatible = "synology,ds213j", "marvell,armada370",
+ "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+
+ /* RTC provided by Seiko S-35390A I2C RTC chip below */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition@00000000 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000c0000>; /* 768KB */
+ };
+
+ partition@000c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000c0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition@00390000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x00390000 0x00440000>; /* 4250KB */
+ };
+
+ partition@007d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* Main device RTC chip */
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ /* Connected to a header on device's PCB */
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Connected to a TI MSP430F2111 for power control */
+ serial@12100 {
+ status = "okay";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&coreclk 0>;
+ };
+
+ /* rear USB port, near reset button */
+ usb@50000 {
+ status = "okay";
+ };
+
+ /* rear USB port, near RJ45 port */
+ usb@51000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+ };
+
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-fan-32-38 {
+ status = "okay";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+ &fan_ctrl_high_pin &fan_alarm_pin>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+ &gpio2 0 GPIO_ACTIVE_HIGH
+ &gpio2 1 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 1000 1
+ 1150 2
+ 1350 4
+ 1500 3
+ 1650 5
+ 1750 6
+ 1900 7 >;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&disk1_led_pin
+ &disk2_led_pin>;
+ pinctrl-names = "default";
+
+ disk1-led-amber {
+ label = "synology:amber:disk1";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ disk2-led-amber {
+ label = "synology:amber:disk2";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+ pinctrl-names = "default";
+
+ sata1_regulator: sata1-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_regulator: sata2-regulator {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA2 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ disk1_led_pin: disk1-led-pin {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ disk2_led_pin: disk2-led-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ sata1_pwr_pin: sata1-pwr-pin {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ sata2_pwr_pin: sata2-pwr-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit0_pin: syno-id-bit0-pin {
+ marvell,pins = "mpp55";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit1_pin: syno-id-bit1-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit2_pin: syno-id-bit2-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit3_pin: syno-id-bit3-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_low_pin: fan-ctrl-low-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_high_pin: fan-ctrl-high-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ fan_alarm_pin: fan-alarm-pin {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 83286ec..83c31c86 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -151,7 +151,7 @@
status = "disabled";
};
- serial@12000 {
+ uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
@@ -160,7 +160,8 @@
clocks = <&coreclk 0>;
status = "disabled";
};
- serial@12100 {
+
+ uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
@@ -170,6 +171,10 @@
status = "disabled";
};
+ pinctrl: pin-ctrl@18000 {
+ reg = <0x18000 0x38>;
+ };
+
coredivclk: corediv-clock@18740 {
compatible = "marvell,armada-370-corediv-clock";
reg = <0x18740 0xc>;
@@ -232,7 +237,7 @@
status = "disabled";
};
- mdio {
+ mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 6b3c23b..fdb3c12 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -95,9 +95,24 @@
compatible = "marvell,aurora-outer-cache";
reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
+ cache-unified;
wt-override;
};
+ /*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins1>;
+ pinctrl-names = "default";
+ };
+
+ spi1: spi@10680 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ };
+
i2c0: i2c@11000 {
reg = <0x11000 0x20>;
};
@@ -106,72 +121,6 @@
reg = <0x11100 0x20>;
};
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x100>;
- };
-
- pinctrl {
- compatible = "marvell,mv88f6710-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins1: sdio-pins1 {
- marvell,pins = "mpp9", "mpp11", "mpp12",
- "mpp13", "mpp14", "mpp15";
- marvell,function = "sd0";
- };
-
- sdio_pins2: sdio-pins2 {
- marvell,pins = "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52";
- marvell,function = "sd0";
- };
-
- sdio_pins3: sdio-pins3 {
- marvell,pins = "mpp48", "mpp49", "mpp50",
- "mpp51", "mpp52", "mpp53";
- marvell,function = "sd0";
- };
-
- i2c0_pins: i2c0-pins {
- marvell,pins = "mpp2", "mpp3";
- marvell,function = "i2c0";
- };
-
- i2s_pins1: i2s-pins1 {
- marvell,pins = "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10",
- "mpp12", "mpp13";
- marvell,function = "audio";
- };
-
- i2s_pins2: i2s-pins2 {
- marvell,pins = "mpp49", "mpp47", "mpp50",
- "mpp59", "mpp57", "mpp61",
- "mpp62", "mpp60", "mpp58";
- marvell,function = "audio";
- };
-
- mdio_pins: mdio-pins {
- marvell,pins = "mpp17", "mpp18";
- marvell,function = "ge";
- };
-
- ge0_rgmii_pins: ge0-rgmii-pins {
- marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11", "mpp12",
- "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "ge0";
- };
-
- ge1_rgmii_pins: ge1-rgmii-pins {
- marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
- "mpp23", "mpp24", "mpp25", "mpp26",
- "mpp27", "mpp28", "mpp29", "mpp30";
- marvell,function = "ge1";
- };
- };
-
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
@@ -205,6 +154,26 @@
interrupts = <91>;
};
+ /*
+ * Default UART pinctrl setting without RTS/CTS, can
+ * be overwritten on board level if a different
+ * configuration is used.
+ */
+ uart0: serial@12000 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ };
+
+ uart1: serial@12100 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
gateclk: clock-gating-control@18220 {
compatible = "marvell,armada-370-gating-clock";
reg = <0x18220 0x4>;
@@ -249,6 +218,7 @@
};
audio_controller: audio-controller@30000 {
+ #sound-dai-cells = <1>;
compatible = "marvell,armada370-audio";
reg = <0x30000 0x4000>;
interrupts = <93>;
@@ -305,3 +275,91 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6710-pinctrl";
+
+ spi0_pins1: spi0-pins1 {
+ marvell,pins = "mpp33", "mpp34",
+ "mpp35", "mpp36";
+ marvell,function = "spi0";
+ };
+
+ spi0_pins2: spi0_pins2 {
+ marvell,pins = "mpp32", "mpp63",
+ "mpp64", "mpp65";
+ marvell,function = "spi0";
+ };
+
+ spi1_pins: spi1-pins {
+ marvell,pins = "mpp49", "mpp50",
+ "mpp51", "mpp52";
+ marvell,function = "spi1";
+ };
+
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "uart0";
+ };
+
+ uart1_pins: uart1-pins {
+ marvell,pins = "mpp41", "mpp42";
+ marvell,function = "uart1";
+ };
+
+ sdio_pins1: sdio-pins1 {
+ marvell,pins = "mpp9", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15";
+ marvell,function = "sd0";
+ };
+
+ sdio_pins2: sdio-pins2 {
+ marvell,pins = "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52";
+ marvell,function = "sd0";
+ };
+
+ sdio_pins3: sdio-pins3 {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp51", "mpp52", "mpp53";
+ marvell,function = "sd0";
+ };
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "i2c0";
+ };
+
+ i2s_pins1: i2s-pins1 {
+ marvell,pins = "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10",
+ "mpp12", "mpp13";
+ marvell,function = "audio";
+ };
+
+ i2s_pins2: i2s-pins2 {
+ marvell,pins = "mpp49", "mpp47", "mpp50",
+ "mpp59", "mpp57", "mpp61",
+ "mpp62", "mpp60", "mpp58";
+ marvell,function = "audio";
+ };
+
+ mdio_pins: mdio-pins {
+ marvell,pins = "mpp17", "mpp18";
+ marvell,function = "ge";
+ };
+
+ ge0_rgmii_pins: ge0-rgmii-pins {
+ marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge1-rgmii-pins {
+ marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29", "mpp30";
+ marvell,function = "ge1";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index de65714..50096d3 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -14,6 +14,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
@@ -36,6 +37,12 @@
#clock-cells = <0>;
clock-frequency = <2000000000>;
};
+ /* 25 MHz reference crystal */
+ refclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
};
cpus {
@@ -342,6 +349,12 @@
#clock-cells = <1>;
};
+ usbcluster: usb-cluster@18400 {
+ compatible = "marvell,armada-375-usb-cluster";
+ reg = <0x18400 0x4>;
+ #phy-cells = <1>;
+ };
+
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
@@ -366,13 +379,15 @@
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<&mpic 5>,
<&mpic 6>;
- clocks = <&coreclk 0>;
+ clocks = <&coreclk 0>, <&refclk>;
+ clock-names = "nbclk", "fixed";
};
watchdog@20300 {
compatible = "marvell,armada-375-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
- clocks = <&coreclk 0>;
+ clocks = <&coreclk 0>, <&refclk>;
+ clock-names = "nbclk", "fixed";
};
cpurst@20800 {
@@ -390,6 +405,8 @@
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 18>;
+ phys = <&usbcluster PHY_TYPE_USB2>;
+ phy-names = "usb";
status = "disabled";
};
@@ -406,6 +423,8 @@
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 16>;
+ phys = <&usbcluster PHY_TYPE_USB3>;
+ phy-names = "usb";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 1af886f..2aaa9d2 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -116,11 +116,11 @@
};
sdhci@d8000 {
- clock-frequency = <200000000>;
broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";
+ no-1-8-v;
};
usb3@f0000 {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 242d0ec..74391da 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -25,9 +25,9 @@
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
- eth0 = ð0;
- eth1 = ð1;
- eth2 = ð2;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ ethernet2 = ð2;
};
soc {
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index a55a97a..c9d25bd 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -60,40 +60,6 @@
};
internal-regs {
- pinctrl {
- pinctrl-0 = <&pmx_phy_int>;
- pinctrl-names = "default";
-
- pmx_ge0: pmx-ge0 {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
-
- pmx_ge1: pmx-ge1 {
- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
- "mpp16", "mpp17", "mpp18", "mpp19",
- "mpp20", "mpp21", "mpp22", "mpp23";
- marvell,function = "ge1";
- };
-
- pmx_keys: pmx-keys {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
- pmx_spi: pmx-spi {
- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
- marvell,function = "spi";
- };
-
- pmx_phy_int: pmx-phy-int {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
- };
-
serial@12000 {
status = "okay";
};
@@ -118,14 +84,14 @@
};
ethernet@70000 {
- pinctrl-0 = <&pmx_ge0>;
+ pinctrl-0 = <&pmx_ge0_rgmii>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
- pinctrl-0 = <&pmx_ge1>;
+ pinctrl-0 = <&pmx_ge1_rgmii>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
@@ -134,8 +100,6 @@
spi0: spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
@@ -162,3 +126,18 @@
};
};
};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_phy_int>;
+ pinctrl-names = "default";
+
+ pmx_keys: pmx-keys {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ pmx_phy_int: pmx-phy-int {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 469cf71..088d8d2 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -22,7 +22,7 @@
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
memory {
@@ -51,37 +51,6 @@
};
internal-regs {
- pinctrl {
- poweroff_pin: poweroff-pin {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
- select_button_pin: select-button-pin {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- scroll_button_pin: scroll-button-pin {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- hdd_led_pin: hdd-led-pin {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
- };
-
serial@12000 {
status = "okay";
};
@@ -97,12 +66,16 @@
};
ethernet@70000 {
+ pinctrl-0 = <&pmx_ge0_rgmii>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
+ pinctrl-0 = <&pmx_ge1_rgmii>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
@@ -125,6 +98,11 @@
reg = <0x2e>;
};
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
@@ -226,7 +204,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
- registers-number = <2>;
+ registers-number = <1>;
spi-max-frequency = <100000>;
};
};
@@ -282,3 +260,34 @@
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
+
+&pinctrl {
+ poweroff_pin: poweroff-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ select_button_pin: select-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ scroll_button_pin: scroll-button-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ hdd_led_pin: hdd-led-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 2592e1c..281ccd2 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -167,17 +167,6 @@
};
internal-regs {
- pinctrl {
- compatible = "marvell,mv78230-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
- };
-
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
@@ -202,3 +191,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 480e237..d7a8d0b 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -251,17 +251,6 @@
};
internal-regs {
- pinctrl {
- compatible = "marvell,mv78260-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
- };
-
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
@@ -305,3 +294,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 2c7b1fe..9c40c13 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -289,17 +289,6 @@
};
internal-regs {
- pinctrl {
- compatible = "marvell,mv78460-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
- };
-
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
@@ -343,3 +332,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 7d8f328..d81430a 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -55,86 +55,10 @@
};
internal-regs {
- pinctrl {
- poweroff: poweroff {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- sata1_led_pin: sata1-led-pin {
- marvell,pins = "mpp31";
- marvell,function = "gpio";
- };
-
- sata2_led_pin: sata2-led-pin {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
- sata3_led_pin: sata3-led-pin {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- sata4_led_pin: sata4-led-pin {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- sata1_power_pin: sata1-power-pin {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- sata2_power_pin: sata2-power-pin {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- sata3_power_pin: sata3-power-pin {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-
- sata4_power_pin: sata4-power-pin {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- sata1_pres_pin: sata1-pres-pin {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
-
- sata2_pres_pin: sata2-pres-pin {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
- sata3_pres_pin: sata3-pres-pin {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-
- sata4_pres_pin: sata4-pres-pin {
- marvell,pins = "mpp35";
- marvell,function = "gpio";
- };
-
- err_led_pin: err-led-pin {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
+ /* Two rear eSATA ports */
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
};
serial@12000 {
@@ -328,3 +252,85 @@
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ poweroff: poweroff {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ sata1_led_pin: sata1-led-pin {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ sata2_led_pin: sata2-led-pin {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ sata3_led_pin: sata3-led-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ sata4_led_pin: sata4-led-pin {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ sata1_power_pin: sata1-power-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ sata2_power_pin: sata2-power-pin {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+
+ sata3_power_pin: sata3-power-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ sata4_power_pin: sata4-power-pin {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ sata3_pres_pin: sata3-pres-pin {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ sata4_pres_pin: sata4-pres-pin {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ err_led_pin: err-led-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 4e5a59e..6f6b091 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -77,12 +77,7 @@
serial@12100 {
status = "okay";
};
- pinctrl {
- led_pins: led-pins-0 {
- marvell,pins = "mpp49", "mpp51", "mpp53";
- marvell,function = "gpio";
- };
- };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -187,3 +182,10 @@
};
};
};
+
+&pinctrl {
+ led_pins: led-pins-0 {
+ marvell,pins = "mpp49", "mpp51", "mpp53";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
new file mode 100644
index 0000000..ba5e94d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -0,0 +1,330 @@
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Synology DS414";
+ compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+ "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /*
+ * Connected to Marvell 88SX7042 SATA-II controller
+ * handling the four disks.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * Connected to EtronTech EJ168A XHCI controller
+ * providing the two rear USB 3.0 ports.
+ */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+
+ /* RTC is provided by Seiko S-35390A below */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition@00000000 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000d0000>; /* 832KB */
+ };
+
+ partition@000c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000d0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition@003a0000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x003a0000 0x00430000>; /* 4250KB */
+ };
+
+ partition@007d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+ };
+
+ i2c@11000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ /* Connected to a header on device's PCB. This
+ * provides the main console for the device.
+ *
+ * Warning: the device may not boot with a 3.3V
+ * USB-serial converter connected when the power
+ * button is pressed. The converter needs to be
+ * connected a few seconds after pressing the
+ * power button. This is possibly due to UART0_TXD
+ * pin being sampled at reset (bit 0 of SAR).
+ */
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Connected to a Microchip PIC16F883 for power control */
+ serial@12100 {
+ status = "okay";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&coreclk 0>;
+ };
+
+ /* Front USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ pinctrl-0 = <&pmx_ge0_rgmii>;
+ pinctrl-names = "default";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ pinctrl-0 = <&pmx_ge1_rgmii>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+ &sata3_pwr_pin &sata4_pwr_pin>;
+ pinctrl-names = "default";
+
+ sata1_regulator: sata1-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_regulator: sata2-regulator {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA2 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata3_regulator: sata3-regulator {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "SATA3 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <6000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata4_regulator: sata4-regulator {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "SATA4 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <8000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ sata1_pwr_pin: sata1-pwr-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ sata2_pwr_pin: sata2-pwr-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ sata3_pwr_pin: sata3-pwr-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ sata4_pwr_pin: sata4-pwr-pin {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ sata3_pres_pin: sata3-pres-pin {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ sata4_pres_pin: sata4-pres-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit0_pin: syno-id-bit0-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_syno_id_bit1: syno-id-bit1-pin {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_syno_id_bit2: syno-id-bit2-pin {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan1_alarm: fan1-alarm-pin {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ fan2_alarm_pin: fan2-alarm-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bff9f6c..bdb36a0 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -39,9 +39,15 @@
compatible = "marvell,aurora-system-cache";
reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
+ cache-unified;
wt-override;
};
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ };
+
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
@@ -52,8 +58,10 @@
reg = <0x11100 0x100>;
};
- serial@12200 {
+ uart2: serial@12200 {
compatible = "snps,dw-apb-uart";
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
reg = <0x12200 0x100>;
reg-shift = <2>;
interrupts = <43>;
@@ -61,8 +69,11 @@
clocks = <&coreclk 0>;
status = "disabled";
};
- serial@12300 {
+
+ uart3: serial@12300 {
compatible = "snps,dw-apb-uart";
+ pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
reg = <0x12300 0x100>;
reg-shift = <2>;
interrupts = <44>;
@@ -199,3 +210,54 @@
};
};
};
+
+&pinctrl {
+ pmx_ge0_gmii: pmx-ge0-gmii {
+ marvell,pins =
+ "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11",
+ "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge0";
+ };
+
+ pmx_ge0_rgmii: pmx-ge0-rgmii {
+ marvell,pins =
+ "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+
+ pmx_ge1_rgmii: pmx-ge1-rgmii {
+ marvell,pins =
+ "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge1";
+ };
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp30", "mpp31", "mpp32",
+ "mpp33", "mpp34", "mpp35";
+ marvell,function = "sd0";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp36", "mpp37",
+ "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
+ uart2_pins: uart2-pins {
+ marvell,pins = "mpp42", "mpp43";
+ marvell,function = "uart2";
+ };
+
+ uart3_pins: uart3-pins {
+ marvell,pins = "mpp44", "mpp45";
+ marvell,function = "uart3";
+ };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index b5b8400..9198b71 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -9,12 +9,12 @@
* licensing only applies to this file, and not this project as a
* whole.
*
- * a) This library is free software; you can redistribute it and/or
+ * a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This library is distributed in the hope that it will be useful,
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index cb100b0..dd1313c 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -956,6 +956,14 @@
};
};
+ rtc@fffffd20 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd20 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ status = "disabled";
+ };
+
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
@@ -966,6 +974,12 @@
atmel,idle-halt;
status = "disabled";
};
+
+ gpbr: syscon@fffffd50 {
+ compatible = "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffd50 0x10>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index a81aab4..cdb9ed6 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -828,12 +828,26 @@
clocks = <&mck>;
};
+ rtc@fffffd20 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd20 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
+ status = "disabled";
+ };
+
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
};
+
+ gpbr: syscon@fffffd50 {
+ compatible = "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffd50 0x10>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 51416c7d..1467750 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -677,6 +677,14 @@
};
};
+ can {
+ pinctrl_can_rx_tx: can_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* CANRX, conflicts with IRQ0 */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* CANTX, conflicts with PCK0 */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -905,6 +913,38 @@
clock-names = "pwm_clk";
status = "disabled";
};
+
+ can: can@fffac000 {
+ compatible = "atmel,at91sam9263-can";
+ reg = <0xfffac000 0x300>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_rx_tx>;
+ clocks = <&can_clk>;
+ clock-names = "can_clk";
+ };
+
+ rtc@fffffd20 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd20 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
+ status = "disabled";
+ };
+
+ rtc@fffffd50 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd50 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
+ status = "disabled";
+ };
+
+ gpbr: syscon@fffffd60 {
+ compatible = "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffd60 0x50>;
+ status = "disabled";
+ };
};
fb0: fb@0x00700000 {
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index d291910..dfaacb1 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -112,9 +112,23 @@
};
};
+ shdwc@fffffd10 {
+ atmel,wakeup-counter = <10>;
+ atmel,wakeup-rtt-timer;
+ };
+
+ rtc@fffffd20 {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+ status = "okay";
+ };
+
watchdog@fffffd40 {
status = "okay";
};
+
+ gpbr: syscon@fffffd50 {
+ status = "okay";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index d3f6513..c134242 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -492,6 +492,27 @@
};
};
+ isi {
+ pinctrl_isi: isi-0 {
+ atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+ AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */
+ AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+ AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */
+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+ AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+ AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+ AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+ AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+ AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+ AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+ AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+ AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+ AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+ AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */
+ AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>;
+ };
+ };
+
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
@@ -1028,6 +1049,17 @@
};
};
+ isi@fffb4000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xfffb4000 0x4000>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&isi_clk>;
+ clock-names = "isi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi>;
+ status = "disabled";
+ };
+
pwm0: pwm@fffb8000 {
compatible = "atmel,at91sam9rl-pwm";
reg = <0xfffb8000 0x300>;
@@ -1192,12 +1224,26 @@
};
};
+ rtc@fffffd20 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd20 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ status = "disabled";
+ };
+
rtc@fffffdb0 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffdb0 0x30>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
};
+
+ gpbr: syscon@fffffd60 {
+ compatible = "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffd60 0x10>;
+ status = "disabled";
+ };
};
fb0: fb@0x00500000 {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index d8dd226..33ce7ca 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -161,6 +161,15 @@
pinctrl-0 = <&pinctrl_pwm_leds>;
};
+ rtc@fffffd20 {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+ status = "okay";
+ };
+
+ gpbr: syscon@fffffd60 {
+ status = "okay";
+ };
+
rtc@fffffdb0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index f0b4352..7242437 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -1059,6 +1059,27 @@
clocks = <&slow_rc_osc &slow_osc>;
};
};
+
+ rtc@fffffeb0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffeb0 0x40>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+
+ rtc@fffffd20 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd20 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ status = "disabled";
+ };
+
+ gpbr: syscon@fffffd60 {
+ compatible = "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffd60 0x10>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index c255421..3c5fa33 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -10,6 +10,7 @@
#include "at91sam9x5_usart3.dtsi"
#include "at91sam9x5_macb0.dtsi"
#include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
/ {
model = "Atmel AT91SAM9X25 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 8eac66c..499cdc8 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -8,6 +8,7 @@
#include "at91sam9x5.dtsi"
#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
/ {
model = "Atmel AT91SAM9X35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 726274f..bbb3ba6 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -860,6 +860,9 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+ <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&mck>;
clock-names = "usart";
status = "disabled";
@@ -871,6 +874,9 @@
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart0_clk>;
clock-names = "usart";
status = "disabled";
@@ -882,6 +888,9 @@
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+ <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart1_clk>;
clock-names = "usart";
status = "disabled";
@@ -893,6 +902,9 @@
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+ <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart2_clk>;
clock-names = "usart";
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
index f44ab77..8eb2f9c 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -1,5 +1,5 @@
/*
- * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
* Ethernet interface.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
@@ -20,10 +20,50 @@
reg = <29>;
};
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
+ can1_clk: can1_clk {
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+ };
+ };
+
+ can0: can@f8000000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8000000 0x300>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ clocks = <&can0_clk>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ can1: can@f8004000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8004000 0x300>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ clocks = <&can1_clk>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ pinctrl@fffff400 {
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0, conflicts with DRXD */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX0, conflicts with DTXD */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1, conflicts with RXD1 */
+ AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX1, conflicts with TXD1 */
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 140217a5..43bb5b5 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -57,6 +57,9 @@
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+ <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart3_clk>;
clock-names = "usart";
status = "disabled";
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
new file mode 100644
index 0000000..60d8389
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -0,0 +1,91 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <25000000>;
+ };
+
+ apb_clk: apb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+
+ sdio_clk: lcpll_ch2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ axi81_clk: axi81_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ keypad_clk: keypad_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <31806>;
+ };
+
+ adc_clk: adc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1562500>;
+ };
+
+ pwm_clk: pwm_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ };
+
+ lcd_clk: mipipll_ch1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
new file mode 100644
index 0000000..5126f9e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -0,0 +1,140 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,cygnus";
+ model = "Broadcom Cygnus SoC";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ /include/ "bcm-cygnus-clock.dtsi"
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus", "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ wdt@18009000 {
+ compatible = "arm,sp805" , "arm,primecell";
+ reg = <0x18009000 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ uart0: serial@18020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@18021000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18021000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart2: serial@18022000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart3: serial@18023000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18023000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@19021000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x19021000 0x1000>,
+ <0x19020100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x19022000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ timer@19020200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x19020200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
new file mode 100644
index 0000000..e479515
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+/include/ "bcm2835-rpi.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+ model = "Raspberry Pi Model B+";
+
+ leds {
+ act {
+ gpios = <&gpio 47 0>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&gpio 35 0>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&gpio {
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+ /* I2S interface */
+ i2s_alt0: i2s_alt0 {
+ brcm,pins = <18 19 20 21>;
+ brcm,function = <4>; /* alt0 */
+ };
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 58a0d60..bafa46f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -1,63 +1,23 @@
/dts-v1/;
-/include/ "bcm2835.dtsi"
+/include/ "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-b", "brcm,bcm2835";
model = "Raspberry Pi Model B";
- memory {
- reg = <0 0x10000000>;
- };
-
leds {
- compatible = "gpio-leds";
-
act {
- label = "ACT";
gpios = <&gpio 16 1>;
- default-state = "keep";
- linux,default-trigger = "heartbeat";
};
};
};
&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&gpioout &alt0 &alt2 &alt3>;
-
- gpioout: gpioout {
- brcm,pins = <6>;
- brcm,function = <1>; /* GPIO out */
- };
-
- alt0: alt0 {
- brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
- brcm,function = <4>; /* alt0 */
- };
-
- alt3: alt3 {
- brcm,pins = <48 49 50 51 52 53>;
- brcm,function = <7>; /* alt3 */
- };
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
/* I2S interface */
- alt2: alt2 {
+ i2s_alt2: i2s_alt2 {
brcm,pins = <28 29 30 31>;
brcm,function = <6>; /* alt2 */
};
};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&sdhci {
- status = "okay";
- bus-width = <4>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
new file mode 100644
index 0000000..c706448
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -0,0 +1,51 @@
+/include/ "bcm2835.dtsi"
+
+/ {
+ memory {
+ reg = <0 0x10000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ act {
+ label = "ACT";
+ default-state = "keep";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+
+ gpioout: gpioout {
+ brcm,pins = <6>;
+ brcm,function = <1>; /* GPIO out */
+ };
+
+ alt0: alt0 {
+ brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
+ brcm,function = <4>; /* alt0 */
+ };
+
+ alt3: alt3 {
+ brcm,pins = <48 49 50 51 52 53>;
+ brcm,function = <7>; /* alt3 */
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&sdhci {
+ status = "okay";
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
new file mode 100644
index 0000000..d2ee952
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -0,0 +1,53 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
+ compatible = "brcm,bcm11360", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
new file mode 100644
index 0000000..9658d4f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360k.dts
@@ -0,0 +1,53 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus SVK (BCM911360K)";
+ compatible = "brcm,bcm11360", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
new file mode 100644
index 0000000..f1bb36f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -0,0 +1,53 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus SVK (BCM958300K)";
+ compatible = "brcm,bcm58300", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index c72bfd4..04f391b 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -26,4 +26,13 @@
};
};
+ð1 { status = "okay"; };
+
+/* Samsung M8G2FA 8GB eMMC */
+&sdhci2 {
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
&uart0 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 9d7c810..20e7c39 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -53,6 +53,35 @@
ranges = <0 0xf7000000 0x1000000>;
+ sdhci0: sdhci@ab0000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab0000 0x200>;
+ clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clock-names = "io", "core";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@ab0800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab0800 0x200>;
+ clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clock-names = "io", "core";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdhci2: sdhci@ab1000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab1000 0x200>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clock-names = "io", "core";
+ pinctrl-0 = <&emmc_pmux>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
l2: l2-cache-controller@ac0000 {
compatible = "marvell,tauros3-cache", "arm,pl310-cache";
reg = <0xac0000 0x1000>;
@@ -79,11 +108,47 @@
clocks = <&chip CLKID_TWD>;
};
+ eth1: ethernet@b90000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xb90000 0x10000>;
+ clocks = <&chip CLKID_GETH1>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy1>;
+ status = "disabled";
+
+ ethphy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
cpu-ctrl@dd0000 {
compatible = "marvell,berlin-cpu-ctrl";
reg = <0xdd0000 0x10000>;
};
+ eth0: ethernet@e50000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xe50000 0x10000>;
+ clocks = <&chip CLKID_GETH0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy0>;
+ status = "disabled";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -249,9 +314,15 @@
chip: chip-control@ea0000 {
compatible = "marvell,berlin2-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>;
clocks = <&refclk>;
clock-names = "refclk";
+
+ emmc_pmux: emmc-pmux {
+ groups = "G26";
+ function = "emmc";
+ };
};
apb@fc0000 {
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index bcd81ff..bdcaff7 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "berlin2cd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Google Chromecast";
@@ -24,6 +25,31 @@
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ white {
+ label = "white";
+ gpios = <&portc 1 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ red {
+ label = "red";
+ gpios = <&portc 2 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
+/*
+ * AzureWave AW-NH387 (Marvell 88W8787)
+ * 802.11b/g/n + Bluetooth 2.1
+ */
+&sdhci0 {
+ non-removable;
+ status = "okay";
};
&uart0 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index cc1df65..9e338ff 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -45,6 +45,15 @@
ranges = <0 0xf7000000 0x1000000>;
+ sdhci0: sdhci@ab0000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab0000 0x200>;
+ clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clock-names = "io", "core";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
l2: l2-cache-controller@ac0000 {
compatible = "arm,pl310-cache";
reg = <0xac0000 0x1000>;
@@ -66,6 +75,42 @@
clocks = <&chip CLKID_TWD>;
};
+ eth1: ethernet@b90000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xb90000 0x10000>;
+ clocks = <&chip CLKID_GETH1>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy1>;
+ status = "disabled";
+
+ ethphy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ eth0: ethernet@e50000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xe50000 0x10000>;
+ clocks = <&chip CLKID_GETH0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy0>;
+ status = "disabled";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -231,6 +276,7 @@
chip: chip-control@ea0000 {
compatible = "marvell,berlin2cd-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>;
clocks = <&refclk>;
clock-names = "refclk";
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index ea1f99b..a403b0a 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -49,3 +49,11 @@
ð0 {
status = "okay";
};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 891d56b..a35deb3 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -123,6 +123,7 @@
local-mac-address = [00 00 00 00 00 00];
#address-cells = <1>;
#size-cells = <0>;
+ phy-connection-type = "mii";
phy-handle = <ðphy0>;
status = "disabled";
@@ -255,7 +256,6 @@
reg = <0x2c14 0x14>;
clocks = <&chip CLKID_CFG>;
clock-names = "timer";
- status = "disabled";
};
timer2: timer@2c28 {
@@ -349,6 +349,7 @@
chip: chip-control@ea0000 {
compatible = "marvell,berlin2q-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
clocks = <&refclk>;
clock-names = "refclk";
@@ -364,6 +365,45 @@
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin2q-ahci", "generic-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ status = "disabled";
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ status = "disabled";
+ };
+ };
+
+ sata_phy: phy@e900a0 {
+ compatible = "marvell,berlin2q-sata-phy";
+ reg = <0xe900a0 0x200>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <1>;
+ status = "disabled";
+
+ sata-phy@0 {
+ reg = <0>;
+ };
+
+ sata-phy@1 {
+ reg = <1>;
+ };
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index c6ce625..0d8a3bd 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -171,6 +171,86 @@
0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
>;
};
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
+ 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
+ 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
+ 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
+ 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
+ 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
+ 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
+ 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
+ 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
+ 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
+ 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
+ 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
+
+ /* Slave 2 */
+ 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (MUX_MODE15)
+ 0x254 (MUX_MODE15)
+ 0x258 (MUX_MODE15)
+ 0x25c (MUX_MODE15)
+ 0x260 (MUX_MODE15)
+ 0x264 (MUX_MODE15)
+ 0x268 (MUX_MODE15)
+ 0x26c (MUX_MODE15)
+ 0x270 (MUX_MODE15)
+ 0x274 (MUX_MODE15)
+ 0x278 (MUX_MODE15)
+ 0x27c (MUX_MODE15)
+
+ /* Slave 2 */
+ 0x198 (MUX_MODE15)
+ 0x19c (MUX_MODE15)
+ 0x1a0 (MUX_MODE15)
+ 0x1a4 (MUX_MODE15)
+ 0x1a8 (MUX_MODE15)
+ 0x1ac (MUX_MODE15)
+ 0x1b0 (MUX_MODE15)
+ 0x1b4 (MUX_MODE15)
+ 0x1b8 (MUX_MODE15)
+ 0x1bc (MUX_MODE15)
+ 0x1c0 (MUX_MODE15)
+ 0x1c4 (MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ 0x23c (MUX_MODE15)
+ 0x240 (MUX_MODE15)
+ >;
+ };
+
};
&i2c1 {
@@ -201,6 +281,7 @@
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1150000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -209,6 +290,7 @@
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <12500000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -226,6 +308,7 @@
regulator-name = "smps8";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -252,6 +335,7 @@
regulator-name = "ldo2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -269,6 +353,7 @@
regulator-name = "ldo9";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -528,3 +613,29 @@
ti,no-reset-on-init;
ti,no-idle-on-init;
};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <2>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <3>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9cc9843..9cd99b9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -34,6 +34,12 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ serial9 = &uart10;
+ ethernet0 = &cpsw_emac0;
+ ethernet1 = &cpsw_emac1;
};
timer {
@@ -335,6 +341,8 @@
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 49>, <&sdma 50>;
+ dma-names = "tx", "rx";
};
uart2: serial@4806c000 {
@@ -344,6 +352,8 @@
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 51>, <&sdma 52>;
+ dma-names = "tx", "rx";
};
uart3: serial@48020000 {
@@ -353,6 +363,8 @@
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 53>, <&sdma 54>;
+ dma-names = "tx", "rx";
};
uart4: serial@4806e000 {
@@ -362,6 +374,8 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 55>, <&sdma 56>;
+ dma-names = "tx", "rx";
};
uart5: serial@48066000 {
@@ -371,6 +385,8 @@
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 63>, <&sdma 64>;
+ dma-names = "tx", "rx";
};
uart6: serial@48068000 {
@@ -380,6 +396,8 @@
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 79>, <&sdma 80>;
+ dma-names = "tx", "rx";
};
uart7: serial@48420000 {
@@ -421,7 +439,11 @@
mailbox1: mailbox@4a0f4000 {
compatible = "ti,omap4-mailbox";
reg = <0x4a0f4000 0x200>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox1";
+ #mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
status = "disabled";
@@ -430,7 +452,12 @@
mailbox2: mailbox@4883a000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883a000 0x200>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox2";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -439,7 +466,12 @@
mailbox3: mailbox@4883c000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883c000 0x200>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox3";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -448,7 +480,12 @@
mailbox4: mailbox@4883e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883e000 0x200>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox4";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -457,7 +494,12 @@
mailbox5: mailbox@48840000 {
compatible = "ti,omap4-mailbox";
reg = <0x48840000 0x200>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox5";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -466,7 +508,12 @@
mailbox6: mailbox@48842000 {
compatible = "ti,omap4-mailbox";
reg = <0x48842000 0x200>;
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox6";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -475,7 +522,12 @@
mailbox7: mailbox@48844000 {
compatible = "ti,omap4-mailbox";
reg = <0x48844000 0x200>;
+ interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox7";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -484,7 +536,12 @@
mailbox8: mailbox@48846000 {
compatible = "ti,omap4-mailbox";
reg = <0x48846000 0x200>;
+ interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox8";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -493,7 +550,12 @@
mailbox9: mailbox@4885e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4885e000 0x200>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox9";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -502,7 +564,12 @@
mailbox10: mailbox@48860000 {
compatible = "ti,omap4-mailbox";
reg = <0x48860000 0x200>;
+ interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox10";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -511,7 +578,12 @@
mailbox11: mailbox@48862000 {
compatible = "ti,omap4-mailbox";
reg = <0x48862000 0x200>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox11";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -520,7 +592,12 @@
mailbox12: mailbox@48864000 {
compatible = "ti,omap4-mailbox";
reg = <0x48864000 0x200>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox12";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -529,7 +606,12 @@
mailbox13: mailbox@48802000 {
compatible = "ti,omap4-mailbox";
reg = <0x48802000 0x200>;
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox13";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
@@ -1141,7 +1223,7 @@
};
};
- omap_dwc3_1@48880000 {
+ omap_dwc3_1: omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";
reg = <0x48880000 0x10000>;
@@ -1162,7 +1244,7 @@
};
};
- omap_dwc3_2@488c0000 {
+ omap_dwc3_2: omap_dwc3_2@488c0000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss2";
reg = <0x488c0000 0x10000>;
@@ -1184,7 +1266,7 @@
};
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
- omap_dwc3_3@48900000 {
+ omap_dwc3_3: omap_dwc3_3@48900000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss3";
reg = <0x48900000 0x10000>;
@@ -1204,26 +1286,6 @@
};
};
- omap_dwc3_4@48940000 {
- compatible = "ti,dwc3";
- ti,hwmods = "usb_otg_ss4";
- reg = <0x48940000 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <1>;
- utmi-mode = <2>;
- ranges;
- status = "disabled";
- usb4: usb@48950000 {
- compatible = "snps,dwc3";
- reg = <0x48950000 0x17000>;
- interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
- tx-fifo-resize;
- maximum-speed = "high-speed";
- dr_mode = "otg";
- };
- };
-
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0xfc0>; /* device IO registers */
@@ -1265,6 +1327,65 @@
ti,irqs-skip = <10 133 139 140>;
ti,irqs-safe-map = <0>;
};
+
+ mac: ethernet@4a100000 {
+ compatible = "ti,cpsw";
+ ti,hwmods = "gmac";
+ clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+ clock-names = "fck", "cpts";
+ cpdma_channels = <8>;
+ ale_entries = <1024>;
+ bd_ram_size = <0x2000>;
+ no_bd_ram = <0>;
+ rx_descs = <64>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ active_slave = <0>;
+ cpts_clock_mult = <0x80000000>;
+ cpts_clock_shift = <29>;
+ reg = <0x48484000 0x1000
+ 0x48485200 0x2E00>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * rx_thresh_pend
+ * rx_pend
+ * tx_pend
+ * misc_pend
+ */
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ status = "disabled";
+
+ davinci_mdio: mdio@48485000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ reg = <0x48485000 0x100>;
+ };
+
+ cpsw_emac0: slave@48480200 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ cpsw_emac1: slave@48480300 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ phy_sel: cpsw-phy-sel@4a002554 {
+ compatible = "ti,dra7xx-cpsw-phy-sel";
+ reg= <0x4a002554 0x4>;
+ reg-names = "gmii-sel";
+ };
+ };
+
};
};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4107428..abbaaa7 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -17,6 +17,13 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1024 MB */
};
+
+ evm_3v3: fixedregulator-evm_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&dra7_pmx_core {
@@ -26,6 +33,78 @@
0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
>;
};
+
+ nand_default: nand_default {
+ pinctrl-single,pins = <
+ 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
+ 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
+ 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
+ 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
+ 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
+ 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
+ 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
+ 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
+ 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
+ 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
+ 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
+ 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
+ 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
+ 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
+ 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
+ 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+ 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+ usb2_pins: pinmux_usb2_pins {
+ pinctrl-single,pins = <
+ 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+ >;
+ };
+
+ tps65917_pins_default: tps65917_pins_default {
+ pinctrl-single,pins = <
+ 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
};
&i2c1 {
@@ -38,6 +117,9 @@
compatible = "ti,tps65917";
reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65917_pins_default>;
+
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-parent = <&gic>;
interrupt-controller;
@@ -136,9 +218,223 @@
};
};
};
+
+ tps65917_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps65917>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <6>;
+ };
};
};
&uart1 {
status = "okay";
};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_default>;
+ ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
+ nand@0,0 {
+ /* To use NAND, DIP switch SW5 must be set like so:
+ * SW5.1 (NAND_SELn) = ON (LOW)
+ * SW5.9 (GPMC_WPN) = OFF (HIGH)
+ */
+ reg = <0 0 4>; /* device IO registers */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <80>;
+ gpmc,cs-wr-off-ns = <80>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <50>;
+ gpmc,oe-on-ns = <4>;
+ gpmc,oe-off-ns = <40>;
+ gpmc,access-ns = <40>;
+ gpmc,wr-access-ns = <80>;
+ gpmc,rd-cycle-ns = <80>;
+ gpmc,wr-cycle-ns = <80>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x000020000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00020000 0x00020000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x000c0000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x001c0000 0x00020000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00200000 0x00800000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00a00000 0x0f600000>;
+ };
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pins>;
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is a viable alternative
+ */
+ cd-gpios = <&gpio6 27 0>;
+};
+
+&mmc2 {
+ /* SW5-3 in ON position */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&evm_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&dra7_pmx_core {
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 2 */
+ 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 2 */
+ 0x198 (MUX_MODE15)
+ 0x19c (MUX_MODE15)
+ 0x1a0 (MUX_MODE15)
+ 0x1a4 (MUX_MODE15)
+ 0x1a8 (MUX_MODE15)
+ 0x1ac (MUX_MODE15)
+ 0x1b0 (MUX_MODE15)
+ 0x1b4 (MUX_MODE15)
+ 0x1b8 (MUX_MODE15)
+ 0x1bc (MUX_MODE15)
+ 0x1c0 (MUX_MODE15)
+ 0x1c4 (MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ 0x23c (MUX_MODE15)
+ 0x240 (MUX_MODE15)
+ >;
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <3>;
+ phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ active_slave = <1>;
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 3be544c..10173fa 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -44,4 +44,26 @@
interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
};
+
+ ocp {
+ omap_dwc3_4: omap_dwc3_4@48940000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss4";
+ reg = <0x48940000 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ status = "disabled";
+ usb4: usb@48950000 {
+ compatible = "snps,dwc3";
+ reg = <0x48950000 0x17000>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 50ccd15..667d323 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -25,37 +25,7 @@
chosen {
bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
- };
-
- reg_1p8v: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- reg_3p3v: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- lan9220@20000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x20000000 0x10000>;
- phy-mode = "mii";
- interrupt-parent = <&gpio0>;
- interrupts = <1 IRQ_TYPE_EDGE_RISING>;
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vddvario-supply = <®_1p8v>;
- vdd33a-supply = <®_3p3v>;
+ stdout-path = &uart1;
};
gpio_keys {
@@ -92,4 +62,35 @@
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lan9220@20000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x20000000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio0>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index 00eeed3..cc7bfe0 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -55,7 +55,7 @@
<0 121 IRQ_TYPE_LEVEL_HIGH>;
};
- smu@e0110000 {
+ clocks@e0110000 {
compatible = "renesas,emev2-smu";
reg = <0xe0110000 0x10000>;
#address-cells = <2>;
@@ -129,7 +129,7 @@
};
};
- sti@e0180000 {
+ timer@e0180000 {
compatible = "renesas,em-sti";
reg = <0xe0180000 0x54>;
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
@@ -137,7 +137,7 @@
clock-names = "sclk";
};
- uart@e1020000 {
+ uart0: serial@e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -145,7 +145,7 @@
clock-names = "sclk";
};
- uart@e1030000 {
+ uart1: serial@e1030000 {
compatible = "renesas,em-uart";
reg = <0xe1030000 0x38>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -153,7 +153,7 @@
clock-names = "sclk";
};
- uart@e1040000 {
+ uart2: serial@e1040000 {
compatible = "renesas,em-uart";
reg = <0xe1040000 0x38>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -161,7 +161,7 @@
clock-names = "sclk";
};
- uart@e1050000 {
+ uart3: serial@e1050000 {
compatible = "renesas,em-uart";
reg = <0xe1050000 0x38>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 693a327..242ddda 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -320,6 +320,16 @@
status = "disabled";
};
+ mfc: codec@13400000 {
+ compatible = "samsung,mfc-v7";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 102 0>;
+ clock-names = "mfc", "sclk_mfc";
+ clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
+ samsung,power-domain = <&pd_mfc>;
+ status = "disabled";
+ };
+
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 807bb5b..bcc9e63 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,23 @@
pinctrl2 = &pinctrl_2;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@900 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x900>;
+ };
+
+ cpu@901 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x901>;
+ };
+ };
+
pmu_system_controller: system-controller@10020000 {
clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
"clkout4", "clkout8", "clkout9";
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 3c00e6e..dd0a43e 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -22,6 +22,23 @@
/ {
compatible = "samsung,exynos4212", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <18>;
};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 5e066cd..dd9ac66 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
@@ -22,6 +23,7 @@
aliases {
i2c9 = &i2c_ak8975;
i2c10 = &i2c_cm36651;
+ i2c11 = &i2c_max77693;
};
memory {
@@ -399,8 +401,6 @@
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-mem-off;
};
ldo23_reg: ldo23 {
@@ -503,8 +503,6 @@
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-mem-off;
};
buck9_reg: buck9 {
@@ -518,6 +516,36 @@
};
};
+ i2c_max77693: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max77693@66 {
+ compatible = "maxim,max77693";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 2>;
+ reg = <0x66>;
+
+ regulators {
+ esafeout1_reg: ESAFEOUT1@1 {
+ regulator-name = "ESAFEOUT1";
+ };
+ esafeout2_reg: ESAFEOUT2@2 {
+ regulator-name = "ESAFEOUT2";
+ };
+ charger_reg: CHARGER@0 {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <60000>;
+ regulator-max-microamp = <2580000>;
+ };
+ };
+ };
+ };
+
mmc@12550000 {
num-slots = <1>;
broken-cd;
@@ -782,3 +810,319 @@
io-channels = <&adc 2>; /* Battery temperature */
};
};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ sleep0: sleep-states {
+ PIN_SLP(gpa0-0, INPUT, NONE);
+ PIN_SLP(gpa0-1, OUT0, NONE);
+ PIN_SLP(gpa0-2, INPUT, NONE);
+ PIN_SLP(gpa0-3, INPUT, UP);
+ PIN_SLP(gpa0-4, INPUT, NONE);
+ PIN_SLP(gpa0-5, INPUT, DOWN);
+ PIN_SLP(gpa0-6, INPUT, DOWN);
+ PIN_SLP(gpa0-7, INPUT, UP);
+
+ PIN_SLP(gpa1-0, INPUT, DOWN);
+ PIN_SLP(gpa1-1, INPUT, DOWN);
+ PIN_SLP(gpa1-2, INPUT, DOWN);
+ PIN_SLP(gpa1-3, INPUT, DOWN);
+ PIN_SLP(gpa1-4, INPUT, DOWN);
+ PIN_SLP(gpa1-5, INPUT, DOWN);
+
+ PIN_SLP(gpb-0, INPUT, NONE);
+ PIN_SLP(gpb-1, INPUT, NONE);
+ PIN_SLP(gpb-2, INPUT, NONE);
+ PIN_SLP(gpb-3, INPUT, NONE);
+ PIN_SLP(gpb-4, INPUT, DOWN);
+ PIN_SLP(gpb-5, INPUT, UP);
+ PIN_SLP(gpb-6, INPUT, DOWN);
+ PIN_SLP(gpb-7, INPUT, DOWN);
+
+ PIN_SLP(gpc0-0, INPUT, DOWN);
+ PIN_SLP(gpc0-1, INPUT, DOWN);
+ PIN_SLP(gpc0-2, INPUT, DOWN);
+ PIN_SLP(gpc0-3, INPUT, DOWN);
+ PIN_SLP(gpc0-4, INPUT, DOWN);
+
+ PIN_SLP(gpc1-0, INPUT, NONE);
+ PIN_SLP(gpc1-1, PREV, NONE);
+ PIN_SLP(gpc1-2, INPUT, NONE);
+ PIN_SLP(gpc1-3, INPUT, NONE);
+ PIN_SLP(gpc1-4, INPUT, NONE);
+
+ PIN_SLP(gpd0-0, INPUT, DOWN);
+ PIN_SLP(gpd0-1, INPUT, DOWN);
+ PIN_SLP(gpd0-2, INPUT, NONE);
+ PIN_SLP(gpd0-3, INPUT, NONE);
+
+ PIN_SLP(gpd1-0, INPUT, DOWN);
+ PIN_SLP(gpd1-1, INPUT, DOWN);
+ PIN_SLP(gpd1-2, INPUT, NONE);
+ PIN_SLP(gpd1-3, INPUT, NONE);
+
+ PIN_SLP(gpf0-0, INPUT, NONE);
+ PIN_SLP(gpf0-1, INPUT, NONE);
+ PIN_SLP(gpf0-2, INPUT, DOWN);
+ PIN_SLP(gpf0-3, INPUT, DOWN);
+ PIN_SLP(gpf0-4, INPUT, NONE);
+ PIN_SLP(gpf0-5, INPUT, DOWN);
+ PIN_SLP(gpf0-6, INPUT, NONE);
+ PIN_SLP(gpf0-7, INPUT, DOWN);
+
+ PIN_SLP(gpf1-0, INPUT, DOWN);
+ PIN_SLP(gpf1-1, INPUT, DOWN);
+ PIN_SLP(gpf1-2, INPUT, DOWN);
+ PIN_SLP(gpf1-3, INPUT, DOWN);
+ PIN_SLP(gpf1-4, INPUT, NONE);
+ PIN_SLP(gpf1-5, INPUT, NONE);
+ PIN_SLP(gpf1-6, INPUT, DOWN);
+ PIN_SLP(gpf1-7, PREV, NONE);
+
+ PIN_SLP(gpf2-0, PREV, NONE);
+ PIN_SLP(gpf2-1, INPUT, DOWN);
+ PIN_SLP(gpf2-2, INPUT, DOWN);
+ PIN_SLP(gpf2-3, INPUT, DOWN);
+ PIN_SLP(gpf2-4, INPUT, DOWN);
+ PIN_SLP(gpf2-5, INPUT, DOWN);
+ PIN_SLP(gpf2-6, INPUT, NONE);
+ PIN_SLP(gpf2-7, INPUT, NONE);
+
+ PIN_SLP(gpf3-0, INPUT, NONE);
+ PIN_SLP(gpf3-1, PREV, NONE);
+ PIN_SLP(gpf3-2, PREV, NONE);
+ PIN_SLP(gpf3-3, PREV, NONE);
+ PIN_SLP(gpf3-4, OUT1, NONE);
+ PIN_SLP(gpf3-5, INPUT, DOWN);
+
+ PIN_SLP(gpj0-0, PREV, NONE);
+ PIN_SLP(gpj0-1, PREV, NONE);
+ PIN_SLP(gpj0-2, PREV, NONE);
+ PIN_SLP(gpj0-3, INPUT, DOWN);
+ PIN_SLP(gpj0-4, PREV, NONE);
+ PIN_SLP(gpj0-5, PREV, NONE);
+ PIN_SLP(gpj0-6, INPUT, DOWN);
+ PIN_SLP(gpj0-7, INPUT, DOWN);
+
+ PIN_SLP(gpj1-0, INPUT, DOWN);
+ PIN_SLP(gpj1-1, PREV, NONE);
+ PIN_SLP(gpj1-2, PREV, NONE);
+ PIN_SLP(gpj1-3, INPUT, DOWN);
+ PIN_SLP(gpj1-4, INPUT, DOWN);
+ };
+};
+
+&pinctrl_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep1>;
+
+ sleep1: sleep-states {
+ PIN_SLP(gpk0-0, PREV, NONE);
+ PIN_SLP(gpk0-1, PREV, NONE);
+ PIN_SLP(gpk0-2, OUT0, NONE);
+ PIN_SLP(gpk0-3, PREV, NONE);
+ PIN_SLP(gpk0-4, PREV, NONE);
+ PIN_SLP(gpk0-5, PREV, NONE);
+ PIN_SLP(gpk0-6, PREV, NONE);
+
+ PIN_SLP(gpk1-0, INPUT, DOWN);
+ PIN_SLP(gpk1-1, INPUT, DOWN);
+ PIN_SLP(gpk1-2, INPUT, DOWN);
+ PIN_SLP(gpk1-3, PREV, NONE);
+ PIN_SLP(gpk1-4, PREV, NONE);
+ PIN_SLP(gpk1-5, PREV, NONE);
+ PIN_SLP(gpk1-6, PREV, NONE);
+
+ PIN_SLP(gpk2-0, INPUT, DOWN);
+ PIN_SLP(gpk2-1, INPUT, DOWN);
+ PIN_SLP(gpk2-2, INPUT, DOWN);
+ PIN_SLP(gpk2-3, INPUT, DOWN);
+ PIN_SLP(gpk2-4, INPUT, DOWN);
+ PIN_SLP(gpk2-5, INPUT, DOWN);
+ PIN_SLP(gpk2-6, INPUT, DOWN);
+
+ PIN_SLP(gpk3-0, OUT0, NONE);
+ PIN_SLP(gpk3-1, INPUT, NONE);
+ PIN_SLP(gpk3-2, INPUT, DOWN);
+ PIN_SLP(gpk3-3, INPUT, NONE);
+ PIN_SLP(gpk3-4, INPUT, NONE);
+ PIN_SLP(gpk3-5, INPUT, NONE);
+ PIN_SLP(gpk3-6, INPUT, NONE);
+
+ PIN_SLP(gpl0-0, INPUT, DOWN);
+ PIN_SLP(gpl0-1, INPUT, DOWN);
+ PIN_SLP(gpl0-2, INPUT, DOWN);
+ PIN_SLP(gpl0-3, INPUT, DOWN);
+ PIN_SLP(gpl0-4, PREV, NONE);
+ PIN_SLP(gpl0-6, PREV, NONE);
+
+ PIN_SLP(gpl1-0, INPUT, DOWN);
+ PIN_SLP(gpl1-1, INPUT, DOWN);
+ PIN_SLP(gpl2-0, INPUT, DOWN);
+ PIN_SLP(gpl2-1, INPUT, DOWN);
+ PIN_SLP(gpl2-2, INPUT, DOWN);
+ PIN_SLP(gpl2-3, INPUT, DOWN);
+ PIN_SLP(gpl2-4, INPUT, DOWN);
+ PIN_SLP(gpl2-5, INPUT, DOWN);
+ PIN_SLP(gpl2-6, PREV, NONE);
+ PIN_SLP(gpl2-7, INPUT, DOWN);
+
+ PIN_SLP(gpm0-0, INPUT, DOWN);
+ PIN_SLP(gpm0-1, INPUT, DOWN);
+ PIN_SLP(gpm0-2, INPUT, DOWN);
+ PIN_SLP(gpm0-3, INPUT, DOWN);
+ PIN_SLP(gpm0-4, INPUT, DOWN);
+ PIN_SLP(gpm0-5, INPUT, DOWN);
+ PIN_SLP(gpm0-6, INPUT, DOWN);
+ PIN_SLP(gpm0-7, INPUT, DOWN);
+
+ PIN_SLP(gpm1-0, INPUT, DOWN);
+ PIN_SLP(gpm1-1, INPUT, DOWN);
+ PIN_SLP(gpm1-2, INPUT, NONE);
+ PIN_SLP(gpm1-3, INPUT, NONE);
+ PIN_SLP(gpm1-4, INPUT, NONE);
+ PIN_SLP(gpm1-5, INPUT, NONE);
+ PIN_SLP(gpm1-6, INPUT, DOWN);
+
+ PIN_SLP(gpm2-0, INPUT, NONE);
+ PIN_SLP(gpm2-1, INPUT, NONE);
+ PIN_SLP(gpm2-2, INPUT, DOWN);
+ PIN_SLP(gpm2-3, INPUT, DOWN);
+ PIN_SLP(gpm2-4, INPUT, DOWN);
+
+ PIN_SLP(gpm3-0, PREV, NONE);
+ PIN_SLP(gpm3-1, PREV, NONE);
+ PIN_SLP(gpm3-2, PREV, NONE);
+ PIN_SLP(gpm3-3, OUT1, NONE);
+ PIN_SLP(gpm3-4, INPUT, DOWN);
+ PIN_SLP(gpm3-5, INPUT, DOWN);
+ PIN_SLP(gpm3-6, INPUT, DOWN);
+ PIN_SLP(gpm3-7, INPUT, DOWN);
+
+ PIN_SLP(gpm4-0, INPUT, DOWN);
+ PIN_SLP(gpm4-1, INPUT, DOWN);
+ PIN_SLP(gpm4-2, INPUT, DOWN);
+ PIN_SLP(gpm4-3, INPUT, DOWN);
+ PIN_SLP(gpm4-4, INPUT, DOWN);
+ PIN_SLP(gpm4-5, INPUT, DOWN);
+ PIN_SLP(gpm4-6, INPUT, DOWN);
+ PIN_SLP(gpm4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy0-0, INPUT, DOWN);
+ PIN_SLP(gpy0-1, INPUT, DOWN);
+ PIN_SLP(gpy0-2, INPUT, DOWN);
+ PIN_SLP(gpy0-3, INPUT, DOWN);
+ PIN_SLP(gpy0-4, INPUT, DOWN);
+ PIN_SLP(gpy0-5, INPUT, DOWN);
+
+ PIN_SLP(gpy1-0, INPUT, DOWN);
+ PIN_SLP(gpy1-1, INPUT, DOWN);
+ PIN_SLP(gpy1-2, INPUT, DOWN);
+ PIN_SLP(gpy1-3, INPUT, DOWN);
+
+ PIN_SLP(gpy2-0, PREV, NONE);
+ PIN_SLP(gpy2-1, INPUT, DOWN);
+ PIN_SLP(gpy2-2, INPUT, NONE);
+ PIN_SLP(gpy2-3, INPUT, NONE);
+ PIN_SLP(gpy2-4, INPUT, NONE);
+ PIN_SLP(gpy2-5, INPUT, NONE);
+
+ PIN_SLP(gpy3-0, INPUT, DOWN);
+ PIN_SLP(gpy3-1, INPUT, DOWN);
+ PIN_SLP(gpy3-2, INPUT, DOWN);
+ PIN_SLP(gpy3-3, INPUT, DOWN);
+ PIN_SLP(gpy3-4, INPUT, DOWN);
+ PIN_SLP(gpy3-5, INPUT, DOWN);
+ PIN_SLP(gpy3-6, INPUT, DOWN);
+ PIN_SLP(gpy3-7, INPUT, DOWN);
+
+ PIN_SLP(gpy4-0, INPUT, DOWN);
+ PIN_SLP(gpy4-1, INPUT, DOWN);
+ PIN_SLP(gpy4-2, INPUT, DOWN);
+ PIN_SLP(gpy4-3, INPUT, DOWN);
+ PIN_SLP(gpy4-4, INPUT, DOWN);
+ PIN_SLP(gpy4-5, INPUT, DOWN);
+ PIN_SLP(gpy4-6, INPUT, DOWN);
+ PIN_SLP(gpy4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy5-0, INPUT, DOWN);
+ PIN_SLP(gpy5-1, INPUT, DOWN);
+ PIN_SLP(gpy5-2, INPUT, DOWN);
+ PIN_SLP(gpy5-3, INPUT, DOWN);
+ PIN_SLP(gpy5-4, INPUT, DOWN);
+ PIN_SLP(gpy5-5, INPUT, DOWN);
+ PIN_SLP(gpy5-6, INPUT, DOWN);
+ PIN_SLP(gpy5-7, INPUT, DOWN);
+
+ PIN_SLP(gpy6-0, INPUT, DOWN);
+ PIN_SLP(gpy6-1, INPUT, DOWN);
+ PIN_SLP(gpy6-2, INPUT, DOWN);
+ PIN_SLP(gpy6-3, INPUT, DOWN);
+ PIN_SLP(gpy6-4, INPUT, DOWN);
+ PIN_SLP(gpy6-5, INPUT, DOWN);
+ PIN_SLP(gpy6-6, INPUT, DOWN);
+ PIN_SLP(gpy6-7, INPUT, DOWN);
+ };
+};
+
+&pinctrl_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep2>;
+
+ sleep2: sleep-states {
+ PIN_SLP(gpz-0, INPUT, DOWN);
+ PIN_SLP(gpz-1, INPUT, DOWN);
+ PIN_SLP(gpz-2, INPUT, DOWN);
+ PIN_SLP(gpz-3, INPUT, DOWN);
+ PIN_SLP(gpz-4, INPUT, DOWN);
+ PIN_SLP(gpz-5, INPUT, DOWN);
+ PIN_SLP(gpz-6, INPUT, DOWN);
+ };
+};
+
+&pinctrl_3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep3>;
+
+ sleep3: sleep-states {
+ PIN_SLP(gpv0-0, INPUT, DOWN);
+ PIN_SLP(gpv0-1, INPUT, DOWN);
+ PIN_SLP(gpv0-2, INPUT, DOWN);
+ PIN_SLP(gpv0-3, INPUT, DOWN);
+ PIN_SLP(gpv0-4, INPUT, DOWN);
+ PIN_SLP(gpv0-5, INPUT, DOWN);
+ PIN_SLP(gpv0-6, INPUT, DOWN);
+ PIN_SLP(gpv0-7, INPUT, DOWN);
+
+ PIN_SLP(gpv1-0, INPUT, DOWN);
+ PIN_SLP(gpv1-1, INPUT, DOWN);
+ PIN_SLP(gpv1-2, INPUT, DOWN);
+ PIN_SLP(gpv1-3, INPUT, DOWN);
+ PIN_SLP(gpv1-4, INPUT, DOWN);
+ PIN_SLP(gpv1-5, INPUT, DOWN);
+ PIN_SLP(gpv1-6, INPUT, DOWN);
+ PIN_SLP(gpv1-7, INPUT, DOWN);
+
+ PIN_SLP(gpv2-0, INPUT, DOWN);
+ PIN_SLP(gpv2-1, INPUT, DOWN);
+ PIN_SLP(gpv2-2, INPUT, DOWN);
+ PIN_SLP(gpv2-3, INPUT, DOWN);
+ PIN_SLP(gpv2-4, INPUT, DOWN);
+ PIN_SLP(gpv2-5, INPUT, DOWN);
+ PIN_SLP(gpv2-6, INPUT, DOWN);
+ PIN_SLP(gpv2-7, INPUT, DOWN);
+
+ PIN_SLP(gpv3-0, INPUT, DOWN);
+ PIN_SLP(gpv3-1, INPUT, DOWN);
+ PIN_SLP(gpv3-2, INPUT, DOWN);
+ PIN_SLP(gpv3-3, INPUT, DOWN);
+ PIN_SLP(gpv3-4, INPUT, DOWN);
+ PIN_SLP(gpv3-5, INPUT, DOWN);
+ PIN_SLP(gpv3-6, INPUT, DOWN);
+ PIN_SLP(gpv3-7, INPUT, DOWN);
+
+ PIN_SLP(gpv4-0, INPUT, DOWN);
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index d8bc059e..0f6ec93 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -22,6 +22,35 @@
/ {
compatible = "samsung,exynos4412", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+
+ cpu@A02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA02>;
+ };
+
+ cpu@A03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA03>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <20>;
};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 0865a2e..c141931 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -12,6 +12,22 @@
* published by the Free Software Foundation.
*/
+#define PIN_PULL_NONE 0
+#define PIN_PULL_DOWN 1
+#define PIN_PULL_UP 3
+
+#define PIN_PDN_OUT0 0
+#define PIN_PDN_OUT1 1
+#define PIN_PDN_INPUT 2
+#define PIN_PDN_PREV 3
+
+#define PIN_SLP(_pin, _mode, _pull) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-con-pdn = <PIN_PDN_ ##_mode>; \
+ samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>; \
+ }
+
/ {
pinctrl@11400000 {
gpa0: gpa0 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 3acd97e..7e728a1 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -7,12 +7,13 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -26,465 +27,52 @@
bootargs = "console=ttySAC2,115200";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- samsung,i2c-slave-addr = <0x66>;
- status = "okay";
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- vinb1-supply = <&main_dc_reg>;
- vinb2-supply = <&main_dc_reg>;
- vinb3-supply = <&main_dc_reg>;
- vinb4-supply = <&main_dc_reg>;
- vinb5-supply = <&main_dc_reg>;
- vinb6-supply = <&main_dc_reg>;
- vinb7-supply = <&main_dc_reg>;
- vinb8-supply = <&main_dc_reg>;
- vinb9-supply = <&main_dc_reg>;
-
- vinl1-supply = <&buck7_reg>;
- vinl2-supply = <&buck7_reg>;
- vinl3-supply = <&buck7_reg>;
- vinl4-supply = <&main_dc_reg>;
- vinl5-supply = <&main_dc_reg>;
- vinl6-supply = <&main_dc_reg>;
- vinl7-supply = <&main_dc_reg>;
- vinl8-supply = <&buck8_reg>;
- vinl9-supply = <&buck8_reg>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
- <&gpd1 1 0>,
- <&gpd1 2 0>;
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_28IO_DP_1.35V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD_COMMON1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_IOPERI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD_MPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_XPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD_COMMON2_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD_33ON_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_COMMON3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_ABB2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_USB_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_COMMON4_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDQ_MMC2_3_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "EXT_33_OFF";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "EXT_28_OFF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "PVDD_LDO25";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- op_mode = <1>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "EXT_18_OFF";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- op_mode = <1>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_MEM_1.35V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1355000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "PVDD_BUCK7";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "PVDD_BUCK8";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_33_OFF_EXT1";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
- };
- };
- };
-
- i2c@12C80000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
-
- wm1811a@1a {
-
- compatible = "wlf,wm1811";
- reg = <0x1a>;
-
- AVDD2-supply = <&main_dc_reg>;
- CPVDD-supply = <&main_dc_reg>;
- DBVDD1-supply = <&main_dc_reg>;
- DBVDD2-supply = <&main_dc_reg>;
- DBVDD3-supply = <&main_dc_reg>;
- LDO1VDD-supply = <&main_dc_reg>;
- SPKVDD1-supply = <&main_dc_reg>;
- SPKVDD2-supply = <&main_dc_reg>;
-
- wlf,ldo1ena = <&gpb0 0 0>;
- wlf,ldo2ena = <&gpb0 1 0>;
- };
- };
-
- i2c@12CE0000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- i2c@121D0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- sata@122F0000 {
- status = "okay";
- };
-
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc_0: mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc_2: mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
menu {
label = "SW-TACT2";
- gpios = <&gpx1 4 1>;
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
home {
label = "SW-TACT3";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
up {
label = "SW-TACT4";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "SW-TACT5";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "SW-TACT6";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
wakeup {
label = "SW-TACT7";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 2>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- vdd-supply = <&ldo8_reg>;
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -502,7 +90,7 @@
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -520,46 +108,455 @@
};
};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
- };
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
- fimd: fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&dp {
+ status = "okay";
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
+ };
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
};
};
};
+};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+&i2c_2 {
+ status = "okay";
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
- reset-gpios = <&gpx3 5 1>;
- connect-gpios = <&gpd1 7 1>;
- };
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
};
};
+
+&i2c_3 {
+ status = "okay";
+
+ wm1811a@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c:sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 6a0f4c0..bc27cc2 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -7,9 +7,11 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
@@ -27,165 +29,6 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x50>;
- };
-
- max77686@09 {
- compatible = "maxim,max77686";
- reg = <0x09>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.2V_LDO_OUT2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "P2.8V_LDO_OUT4";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "P1.8V_LDO_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "P1.1V_LDO_OUT6";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "P1.8V_LDO_OUT11";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "P1.8V_LDO_OUT13";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
@@ -210,146 +53,6 @@
regulator-always-on;
};
- i2c@12C70000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
-
- eeprom@51 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x51>;
- };
-
- wm8994: wm8994@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- clocks = <&codec_mclk>;
- clock-names = "MCLK1";
-
- AVDD2-supply = <&vdd>;
- CPVDD-supply = <&vdd>;
- DBVDD-supply = <&dbvdd>;
- SPKVDD1-supply = <&spkvdd>;
- SPKVDD2-supply = <&spkvdd>;
- };
- };
-
- i2c@121D0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
- status = "okay";
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12CE0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- sata@122F0000 {
- status = "okay";
- };
-
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- };
-
- spi_1: spi@12d30000 {
- cs-gpios = <&gpa2 5 0>;
- status = "okay";
-
- w25q80bw@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
-
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
- };
- };
- };
-
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
sound {
compatible = "samsung,smdk-wm8994";
@@ -357,42 +60,6 @@
samsung,audio-codec = <&wm8994>;
};
- usb@12110000 {
- samsung,vbus-gpio = <&gpx2 6 0>;
- };
-
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- status = "okay";
- };
-
- fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 1280x800 */
- clock-frequency = <50000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <4>;
- hback-porch = <4>;
- hsync-len = <4>;
- vback-porch = <4>;
- vfront-porch = <4>;
- vsync-len = <4>;
- };
- };
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -406,3 +73,340 @@
};
};
};
+
+&dp {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ status = "okay";
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
+ };
+ };
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+
+ eeprom@50 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x50>;
+ };
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+
+ eeprom@51 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x51>;
+ };
+
+ wm8994: wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&codec_mclk>;
+ clock-names = "MCLK1";
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
+ };
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c: sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+ status = "okay";
+ cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index e51fcef..f9bc04b 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -6,10 +6,13 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
@@ -25,76 +28,7 @@
};
chosen {
- };
-
- rtc@101E0000 {
- status = "okay";
- };
-
- pinctrl@11400000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@13400000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ bootargs = "console=tty1";
};
gpio-keys {
@@ -102,14 +36,14 @@
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -130,8 +64,8 @@
i2c-parent = <&{/i2c@12CA0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
@@ -154,7 +88,7 @@
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
@@ -241,13 +175,6 @@
};
i2c@12CD0000 {
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
-
ptn3460: lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
@@ -258,10 +185,6 @@
};
};
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
@@ -275,20 +198,12 @@
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy@12100000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb@12110000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -296,18 +211,6 @@
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
@@ -319,30 +222,46 @@
pinctrl-names = "default";
};
- fimd@14400000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&fet6>;
backlight = <&backlight>;
};
+};
- dp-controller@145B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
- bridge = <&ptn3460>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+ bridge = <&ptn3460>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
@@ -350,10 +269,10 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686@09 {
+ max77686: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
@@ -503,7 +422,7 @@
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
@@ -550,6 +469,13 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
@@ -563,6 +489,10 @@
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -587,7 +517,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
cap-sd-highspeed;
};
@@ -610,12 +540,82 @@
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
&spi_1 {
@@ -624,4 +624,8 @@
num-cs = <1>;
};
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
new file mode 100644
index 0000000..f5566f8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -0,0 +1,536 @@
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ s5m8767-pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&pinctrl_0 {
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp-hpd-gpio {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&sd1_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index f21b9aa..012b021 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -218,7 +218,7 @@
clock-names = "fimg2d";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -227,7 +227,7 @@
clock-names = "mfc";
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -261,7 +261,7 @@
clock-names = "uart", "clk_uart_baud0";
};
- sata@122F0000 {
+ sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
@@ -573,7 +573,7 @@
#phy-cells = <1>;
};
- usb@12110000 {
+ ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
@@ -588,7 +588,7 @@
};
};
- usb@12120000 {
+ ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
@@ -710,7 +710,7 @@
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -736,14 +736,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 82cdb74..9a050e1 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -12,6 +12,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5420.dtsi"
/ {
@@ -151,7 +152,7 @@
status = "okay";
clock-frequency = <400000>;
- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
@@ -560,7 +561,7 @@
status = "okay";
num-slots = <1>;
broken-cd;
- caps2-mmc-hs200-1_8v;
+ mmc-hs200-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
@@ -727,6 +728,8 @@
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};
&spi_2 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7bb1c8d..e8fdda8 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -12,6 +12,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5800.dtsi"
/ {
@@ -150,7 +151,7 @@
status = "okay";
clock-frequency = <400000>;
- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
@@ -548,7 +549,7 @@
status = "okay";
num-slots = <1>;
broken-cd;
- caps2-mmc-hs200-1_8v;
+ mmc-hs200-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
@@ -715,6 +716,8 @@
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};
&spi_2 {
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
index 05b44c2..721b092 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
@@ -51,3 +51,36 @@
&uart0 {
status = "okay";
};
+
+&gmac0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy2>;
+ phy-mode = "mii";
+ /* Placeholder, overwritten by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+};
+
+&gmac1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+ /* Placeholder, overwritten by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ahci {
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index f85ba29..c52722b 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -131,6 +131,249 @@
clock-names = "apb_pclk";
status = "disabled";
};
+
+ gpio0: gpio@b20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb20000 0x1000>;
+ interrupts = <0 108 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@b21000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb21000 0x1000>;
+ interrupts = <0 109 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@b22000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb22000 0x1000>;
+ interrupts = <0 110 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio3: gpio@b23000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb23000 0x1000>;
+ interrupts = <0 111 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio4: gpio@b24000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb24000 0x1000>;
+ interrupts = <0 112 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio5: gpio@004000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x004000 0x1000>;
+ interrupts = <0 113 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio6: gpio@b26000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb26000 0x1000>;
+ interrupts = <0 114 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio7: gpio@b27000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb27000 0x1000>;
+ interrupts = <0 115 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio8: gpio@b28000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb28000 0x1000>;
+ interrupts = <0 116 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio9: gpio@b29000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb29000 0x1000>;
+ interrupts = <0 117 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio10: gpio@b2a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2a000 0x1000>;
+ interrupts = <0 118 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio11: gpio@b2b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2b000 0x1000>;
+ interrupts = <0 119 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio12: gpio@b2c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2c000 0x1000>;
+ interrupts = <0 120 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio13: gpio@b2d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2d000 0x1000>;
+ interrupts = <0 121 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio14: gpio@b2e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2e000 0x1000>;
+ interrupts = <0 122 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio15: gpio@b2f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2f000 0x1000>;
+ interrupts = <0 123 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio16: gpio@b30000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb30000 0x1000>;
+ interrupts = <0 124 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio17: gpio@b31000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb31000 0x1000>;
+ interrupts = <0 125 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@a2c000 {
+ compatible = "arm,sp805", "arm,primecell";
+ arm,primecell-periphid = <0x00141805>;
+ reg = <0xa2c000 0x1000>;
+ interrupts = <0 29 4>;
+ clocks = <&clock HIX5HD2_WDG0_RST>;
+ clock-names = "apb_pclk";
+ };
};
local_timer@00a00600 {
@@ -148,9 +391,15 @@
};
sysctrl: system-controller@00000000 {
- compatible = "hisilicon,sysctrl";
+ compatible = "hisilicon,sysctrl", "syscon";
reg = <0x00000000 0x1000>;
- reboot-offset = <0x4>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&sysctrl>;
+ offset = <0x4>;
+ mask = <0xdeadbeef>;
};
cpuctrl@00a22000 {
@@ -166,5 +415,142 @@
#clock-cells = <1>;
};
};
+
+ /* unremovable emmc as mmcblk0 */
+ mmc: mmc@1830000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x1830000 0x1000>;
+ interrupts = <0 35 4>;
+ clocks = <&clock HIX5HD2_MMC_CIU_RST>,
+ <&clock HIX5HD2_MMC_BIU_CLK>;
+ clock-names = "ciu", "biu";
+ };
+
+ sd: mmc@1820000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x1820000 0x1000>;
+ interrupts = <0 34 4>;
+ clocks = <&clock HIX5HD2_SD_CIU_RST>,
+ <&clock HIX5HD2_SD_BIU_CLK>;
+ clock-names = "ciu","biu";
+ };
+
+ gmac0: ethernet@1840000 {
+ compatible = "hisilicon,hix5hd2-gmac";
+ reg = <0x1840000 0x1000>,<0x184300c 0x4>;
+ interrupts = <0 71 4>;
+ clocks = <&clock HIX5HD2_MAC0_CLK>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@1841000 {
+ compatible = "hisilicon,hix5hd2-gmac";
+ reg = <0x1841000 0x1000>,<0x1843010 0x4>;
+ interrupts = <0 72 4>;
+ clocks = <&clock HIX5HD2_MAC1_CLK>;
+ status = "disabled";
+ };
+
+ usb0: ehci@1890000 {
+ compatible = "generic-ehci";
+ reg = <0x1890000 0x1000>;
+ interrupts = <0 66 4>;
+ clocks = <&clock HIX5HD2_USB_CLK>;
+ };
+
+ usb1: ohci@1880000 {
+ compatible = "generic-ohci";
+ reg = <0x1880000 0x1000>;
+ interrupts = <0 67 4>;
+ clocks = <&clock HIX5HD2_USB_CLK>;
+ };
+
+ peripheral_ctrl: syscon@a20000 {
+ compatible = "syscon";
+ reg = <0xa20000 0x1000>;
+ };
+
+ sata_phy: phy@1900000 {
+ compatible = "hisilicon,hix5hd2-sata-phy";
+ reg = <0x1900000 0x10000>;
+ #phy-cells = <0>;
+ hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+ hisilicon,power-reg = <0x8 10>;
+ };
+
+ ahci: sata@1900000 {
+ compatible = "hisilicon,hisi-ahci";
+ reg = <0x1900000 0x10000>;
+ interrupts = <0 70 4>;
+ clocks = <&clock HIX5HD2_SATA_CLK>;
+ };
+
+ ir: ir@001000 {
+ compatible = "hisilicon,hix5hd2-ir";
+ reg = <0x001000 0x1000>;
+ interrupts = <0 47 4>;
+ clocks = <&clock HIX5HD2_FIXED_24M>;
+ hisilicon,power-syscon = <&sysctrl>;
+ };
+
+ i2c0: i2c@b10000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb10000 0x1000>;
+ interrupts = <0 38 4>;
+ clocks = <&clock HIX5HD2_I2C0_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@b11000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb11000 0x1000>;
+ interrupts = <0 39 4>;
+ clocks = <&clock HIX5HD2_I2C1_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@b12000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb12000 0x1000>;
+ interrupts = <0 40 4>;
+ clocks = <&clock HIX5HD2_I2C2_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@b13000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb13000 0x1000>;
+ interrupts = <0 41 4>;
+ clocks = <&clock HIX5HD2_I2C3_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@b16000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb16000 0x1000>;
+ interrupts = <0 43 4>;
+ clocks = <&clock HIX5HD2_I2C4_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@b17000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb17000 0x1000>;
+ interrupts = <0 44 4>;
+ clocks = <&clock HIX5HD2_I2C5_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
index c568f06..560d621 100644
--- a/arch/arm/boot/dts/k2e-evm.dts
+++ b/arch/arm/boot/dts/k2e-evm.dts
@@ -139,3 +139,15 @@
};
};
};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index c358b4b..5fc14683 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -85,6 +85,51 @@
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x240>;
};
+
+ pcie@21020000 {
+ compatible = "ti,keystone-pcie","snps,dw-pcie";
+ clocks = <&clkpcie1>;
+ clock-names = "pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+ ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
+ 0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+
+ device_type = "pci";
+ num-lanes = <2>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
+ <0 0 0 2 &pcie_intc1 1>, /* INT B */
+ <0 0 0 3 &pcie_intc1 2>, /* INT C */
+ <0 0 0 4 &pcie_intc1 3>; /* INT D */
+
+ pcie_msi_intc1: msi-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie_intc1: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts
index fec4312..85cc7f2 100644
--- a/arch/arm/boot/dts/k2l-evm.dts
+++ b/arch/arm/boot/dts/k2l-evm.dts
@@ -116,3 +116,15 @@
};
};
};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 5d3e83f..c06542b 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -285,5 +285,50 @@
#interrupt-cells = <1>;
ti,syscon-dev = <&devctrl 0x2a0>;
};
+
+ pcie@21800000 {
+ compatible = "ti,keystone-pcie", "snps,dw-pcie";
+ clocks = <&clkpcie>;
+ clock-names = "pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+ ranges = <0x81000000 0 0 0x23250000 0 0x4000
+ 0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+
+ device_type = "pci";
+ num-lanes = <2>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
+ <0 0 0 2 &pcie_intc0 1>, /* INT B */
+ <0 0 0 3 &pcie_intc0 2>, /* INT C */
+ <0 0 0 4 &pcie_intc0 3>; /* INT D */
+
+ pcie_msi_intc0: msi-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie_intc0: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
new file mode 100644
index 0000000..786959e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "D-Link DIR-665";
+ compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>; /* 128 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-0 =< &pmx_led_usb
+ &pmx_led_internet_blue
+ &pmx_led_internet_amber
+ &pmx_led_5g &pmx_led_status_blue
+ &pmx_led_wps &pmx_led_status_amber
+ &pmx_led_24g
+ &pmx_btn_restart &pmx_btn_wps>;
+ pinctrl-names = "default";
+
+ pmx_led_usb: pmx-led-usb {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_led_internet_blue: pmx-led-internet-blue {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_internet_amber: pmx-led-internet-amber {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_5g: pmx-led-5g {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_status_blue: pmx-led-status-blue {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_led_wps: pmx-led-wps {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_led_status_amber: pmx-led-status-amber {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ pmx_led_24g: pmx-led-24g {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ pmx_btn_restart: pmx-btn-restart {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_btn_wps: pmx-btn-wps {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ };
+
+ spi@10600 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25l12805d";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "nvram";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "kernel";
+ reg = <0x40000 0x180000>;
+ };
+
+ partition@1c0000 {
+ label = "rootfs";
+ reg = <0x1c0000 0xe00000>;
+ };
+
+ cal_data: partition@fc0000 {
+ label = "cal_data";
+ reg = <0xfc0000 0x10000>;
+ read-only;
+ };
+
+ partition@fd0000 {
+ label = "lang_pack";
+ reg = <0xfd0000 0x30000>;
+ read-only;
+ };
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ status = "okay";
+ };
+
+ ehci@50000 {
+ status = "okay";
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ blue-usb {
+ label = "dir665:blue:usb";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ blue-internet {
+ /* Can only be turned on if the Internet
+ * Ethernet port has Link
+ */
+ label = "dir665:blue:internet";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ amber-internet {
+ label = "dir665:amber:internet";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+ blue-wifi5g {
+ label = "dir665:blue:5g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ blue-status {
+ label = "dir665:blue:status";
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ blue-wps {
+ label = "dir665:blue:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+ amber-status {
+ label = "dir665:amber:status";
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ };
+ blue-24g {
+ label = "dir665:blue:24g";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð0port>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0>; /* MDIO address 0, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex. */
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ speed = <1000>;
+ duplex = <1>;
+ };
+};
+
+/* eth1 is connected to the switch as well. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion. */
+
+ð1 {
+ status = "disabled";
+};
+
+/* There is no battery on the boards, so the RTC does not keep time
+ * when there is no power, making it useless. */
+&rtc {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 811e097..8be5b2e 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -266,7 +266,7 @@
s35390a: s35390a@30 {
status = "disabled";
- compatible = "ssi,s35390a";
+ compatible = "sii,s35390a";
reg = <0x30>;
};
};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index 521c587..445fafc 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -23,24 +23,29 @@
ethernet@gpmc {
compatible = "smsc,lan9221", "smsc,lan9115";
bank-width = <2>;
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <1>;
- gpmc,cs-rd-off-ns = <180>;
- gpmc,cs-wr-off-ns = <180>;
- gpmc,adv-rd-off-ns = <18>;
- gpmc,adv-wr-off-ns = <48>;
- gpmc,oe-on-ns = <54>;
- gpmc,oe-off-ns = <168>;
- gpmc,we-on-ns = <54>;
- gpmc,we-off-ns = <168>;
- gpmc,rd-cycle-ns = <186>;
- gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <144>;
- gpmc,page-burst-access-ns = <24>;
- gpmc,bus-turnaround-ns = <90>;
- gpmc,cycle2cycle-delay-ns = <90>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <150>;
+ gpmc,cs-wr-off-ns = <150>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <140>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <140>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <120>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <75>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index 68221fa..46ef3e4 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -5,7 +5,7 @@
#include "omap-gpmc-smsc911x.dtsi"
&gpmc {
- ranges = <3 0 0x10000000 0x00000400>,
+ ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */
<7 0 0x2c000000 0x01000000>;
/*
@@ -15,7 +15,65 @@
*/
uart@3,0 {
compatible = "ns16550a";
- reg = <3 0 0x100>;
+ reg = <3 0 8>; /* CS3, offset 0, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <1>;
+ gpmc,wait-pin = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <155>;
+ gpmc,cs-wr-off-ns = <155>;
+ gpmc,adv-on-ns = <15>;
+ gpmc,adv-rd-off-ns = <40>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <145>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <145>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <145>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <20>;
+ gpmc,cycle2cycle-delay-ns = <20>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <45>;
+ gpmc,wr-access-ns = <145>;
+ };
+ uart@3,1 {
+ compatible = "ns16550a";
+ reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+ uart@3,2 {
+ compatible = "ns16550a";
+ reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+ uart@3,3 {
+ compatible = "ns16550a";
+ reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */
bank-width = <2>;
reg-shift = <1>;
reg-io-width = <1>;
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index 24c50db..c9f1e93 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -40,14 +40,14 @@
};
&gpmc {
- ranges = <0 0 0x04000000 0x10000000>;
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
/* gpio-irq for dma: 26 */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x10000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,burst-length = <16>;
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index ae89aad..e2b2e93 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -157,6 +157,7 @@
interrupts = <26>, <34>;
interrupt-names = "dsp", "iva";
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
mbox_dsp: dsp {
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
index 2c90d29..05eca2e 100644
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -43,7 +43,31 @@
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
reg = <5 0x300 0xf>;
bank-width = <2>;
- gpmc,mux-add-data;
- };
+ gpmc,sync-clk-ps = <0>;
+ gpmc,mux-add-data = <2>;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <7>;
+ gpmc,cs-rd-off-ns = <233>;
+ gpmc,cs-wr-off-ns = <233>;
+ gpmc,adv-on-ns = <22>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,oe-on-ns = <67>;
+ gpmc,oe-off-ns = <210>;
+ gpmc,we-on-ns = <67>;
+ gpmc,we-off-ns = <210>;
+ gpmc,rd-cycle-ns = <233>;
+ gpmc,wr-cycle-ns = <233>;
+ gpmc,access-ns = <233>;
+ gpmc,page-burst-access-ns = <30>;
+ gpmc,bus-turnaround-ns = <30>;
+ gpmc,cycle2cycle-delay-ns = <30>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ };
};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index b56d7161..0dc8de2 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -247,6 +247,7 @@
reg = <0x48094000 0x200>;
interrupts = <26>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
mbox_dsp: dsp {
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index d00502f..0ab748c 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -134,3 +134,14 @@
bus-width = <4>;
cap-power-off-card;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t35x
+ >;
+};
+
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
index d145849..8dd14fc 100644
--- a/arch/arm/boot/dts/omap3-cm-t3530.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -46,3 +46,14 @@
bus-width = <4>;
cap-power-off-card;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t35x
+ >;
+};
+
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index b3f9a50..46eadb2 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -31,6 +31,19 @@
};
};
+&omap3_pmx_wkup {
+ dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ >;
+ };
+};
+
&omap3_pmx_core {
mmc2_pins: pinmux_mmc2_pins {
@@ -61,3 +74,14 @@
bus-width = <4>;
cap-power-off-card;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t3730
+ >;
+};
+
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index c671a22..b074673 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -76,6 +76,45 @@
OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */
>;
};
+
+ dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ >;
+ };
};
&uart3 {
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index da402f0..169037e 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -106,10 +106,10 @@
};
&gpmc {
- ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,sync-clk-ps = <0>;
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index a8bd434..16e8ce3 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -154,13 +154,14 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
+ ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */
<5 0 0x2c000000 0x01000000>;
nand@0,0 {
linux,mtd-name= "hynix,h8kds0un0mer-4em";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
+ gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index fd34f91..655d6e9 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -104,67 +104,67 @@
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
- 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
- >;
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
};
};
@@ -397,10 +397,10 @@
};
&gpmc {
- ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index e2d163b..8a63ad2 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -31,18 +31,6 @@
regulator-always-on;
};
- lbee1usjyc_vmmc: lbee1usjyc_vmmc {
- pinctrl-names = "default";
- pinctrl-0 = <&lbee1usjyc_pins>;
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
- startup-delay-us = <10000>;
- enable-active-high;
- vin-supply = <&vdd33>;
- };
};
&omap3_pmx_core {
@@ -53,13 +41,6 @@
>;
};
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
- >;
- };
-
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
@@ -67,15 +48,6 @@
>;
};
- /* WiFi/BT combo */
- lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
- pinctrl-single,pins = <
- 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
- 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
- 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
- >;
- };
-
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
@@ -120,13 +92,6 @@
>;
};
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
- 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
- >;
- };
-
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
@@ -135,6 +100,55 @@
};
};
+&gpmc {
+ nand@0,0 {
+ linux,mtd-name= "micron,mt29c4g96maz";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0 0x100000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x100000 0x180000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x280000 0x100000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x380000 0x300000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x680000 0x1f980000>;
+ };
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -156,12 +170,6 @@
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- clock-frequency = <400000>;
-};
-
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
@@ -181,14 +189,6 @@
bus-width = <4>;
};
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <&lbee1usjyc_vmmc>;
- bus-width = <4>;
- non-removable;
-};
-
&mmc3 {
status = "disabled";
};
@@ -198,11 +198,6 @@
pinctrl-0 = <&uart1_pins>;
};
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-};
-
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
new file mode 100644
index 0000000..e458c21
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Common Device Tree Source for IGEPv2
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+ compatible = "gpio-leds";
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+ vcc-supply = <&hsusb1_power>;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &tfp410_pins
+ &dss_dpi_pins
+ >;
+
+ tfp410_pins: pinmux_tfp410_pins {
+ pinctrl-single,pins = <
+ 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb1_pins
+ >;
+
+ hsusbb1_pins: pinmux_hsusbb1_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
+ >;
+ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+ >;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x20000000>,
+ <5 0 0x2c000000 0x01000000>;
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc9221_pins>;
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
+
+&dss {
+ status = "ok";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
new file mode 100644
index 0000000..cc8bd0c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -0,0 +1,45 @@
+/*
+ * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+ model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3";
+
+ /* Regulator to trigger the WL_EN signal of the Wifi module */
+ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbep5clwmc-wlen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4) /* mcspi1_cs3.gpio_177 - W_IRQ */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
+ >;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+ vmmc-supply = <&lbep5clwmc_wlen>;
+ bus-width = <4>;
+ non-removable;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index b22caaa..fea7f7e 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
+ * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -9,272 +9,59 @@
* published by the Free Software Foundation.
*/
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
+#include "omap3-igep0020-common.dtsi"
/ {
- model = "IGEPv2 (TI OMAP AM/DM37x)";
+ model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
- compatible = "gpio-leds";
-
- boot {
- label = "omap3:green:boot";
- gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- user0 {
- label = "omap3:red:user0";
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user1 {
- label = "omap3:red:user1";
- gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user2 {
- label = "omap3:green:user1";
- gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
- };
+ /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
+ lbee1usjyc_pdn: lbee1usjyc_pdn {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
+ startup-delay-us = <10000>;
+ enable-active-high;
};
- /* HS USB Port 1 Power */
- hsusb1_power: hsusb1_power_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb1_vbus";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
- startup-delay-us = <70000>;
- };
-
- /* HS USB Host PHY on PORT 1 */
- hsusb1_phy: hsusb1_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
- vcc-supply = <&hsusb1_power>;
- };
-
- tfp410: encoder@0 {
- compatible = "ti,tfp410";
- powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tfp410_in: endpoint@0 {
- remote-endpoint = <&dpi_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- tfp410_out: endpoint@0 {
- remote-endpoint = <&dvi_connector_in>;
- };
- };
- };
- };
-
- dvi0: connector@0 {
- compatible = "dvi-connector";
- label = "dvi";
-
- digital;
-
- ddc-i2c-bus = <&i2c3>;
-
- port {
- dvi_connector_in: endpoint {
- remote-endpoint = <&tfp410_out>;
- };
- };
+ /* Regulator to trigger the RESET_N_W signal of the Wifi module */
+ lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-reset-n-w";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
+ enable-active-high;
};
};
&omap3_pmx_core {
+ lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ >;
+ };
+};
+
+/* On board Wifi module */
+&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <
- &tfp410_pins
- &dss_dpi_pins
- >;
-
- tfp410_pins: pinmux_tfp410_pins {
- pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
- >;
- };
-
- dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
- 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
- >;
- };
-};
-
-&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <
- &hsusbb1_pins
- >;
-
- hsusbb1_pins: pinmux_hsusbb1_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
- OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
- OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
- OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
- OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
- OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
- OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
- OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
- OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
- OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
- OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
- OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
- >;
- };
-
- leds_pins: pinmux_leds_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
- OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
- OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
- >;
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in the EEPROM
- * as EDID data.
- */
- eeprom@50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
- <5 0 0x2c000000 0x01000000>;
-
- nand@0,0 {
- linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 0>;
- nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
-
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SPL";
- reg = <0 0x100000>;
- };
- partition@80000 {
- label = "U-Boot";
- reg = <0x100000 0x180000>;
- };
- partition@1c0000 {
- label = "Environment";
- reg = <0x280000 0x100000>;
- };
- partition@280000 {
- label = "Kernel";
- reg = <0x380000 0x300000>;
- };
- partition@780000 {
- label = "Filesystem";
- reg = <0x680000 0x1f980000>;
- };
- };
-
- ethernet@gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc9221_pins>;
- reg = <5 0 0xff>;
- interrupt-parent = <&gpio6>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&usbhshost {
- port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
- phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
- /* Needed for DSS */
- regulator-name = "vdds_dsi";
-};
-
-&dss {
- status = "ok";
-
- port {
- dpi_out: endpoint {
- remote-endpoint = <&tfp410_in>;
- data-lines = <24>;
- };
- };
+ pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+ vmmc-supply = <&lbee1usjyc_pdn>;
+ vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ bus-width = <4>;
+ non-removable;
};
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
new file mode 100644
index 0000000..0cb1527
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Common Device Tree Source for IGEP COM MODULE
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+
+/ {
+ leds: gpio_leds {
+ compatible = "gpio-leds";
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */
+ default-state = "off";
+ };
+ };
+};
+
+&omap3_pmx_core {
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ leds_core2_pins: pinmux_leds_core2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
new file mode 100644
index 0000000..9326b28
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -0,0 +1,67 @@
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+ model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3";
+
+ /* Regulator to trigger the WL_EN signal of the Wifi module */
+ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbep5clwmc-wlen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
+ >;
+ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
+ >;
+ };
+
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins &leds_core2_pins>;
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+ vmmc-supply = <&lbep5clwmc_wlen>;
+ bus-width = <4>;
+ non-removable;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 2793749..8150f47 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
+ * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -9,97 +9,62 @@
* published by the Free Software Foundation.
*/
-#include "omap3-igep.dtsi"
+#include "omap3-igep0030-common.dtsi"
/ {
- model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
+ model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
- compatible = "gpio-leds";
+ /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
+ lbee1usjyc_pdn: lbee1usjyc_pdn {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
+ startup-delay-us = <10000>;
+ enable-active-high;
+ };
- boot {
- label = "omap3:green:boot";
- gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- user0 {
- label = "omap3:red:user0";
- gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
- default-state = "off";
- };
-
- user1 {
- label = "omap3:green:user1";
- gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
- default-state = "off";
- };
-
- user2 {
- label = "omap3:red:user1";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ /* Regulator to trigger the RESET_N_W signal of the Wifi module */
+ lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-reset-n-w";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
+ enable-active-high;
};
};
-&omap3_pmx_core2 {
- leds_pins: pinmux_leds_pins {
+&omap3_pmx_core {
+ lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
>;
};
};
-&gpmc {
- ranges = <0 0 0x00000000 0x20000000>;
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_core2_pins>;
- nand@0,0 {
- linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 0>;
- nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
-
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SPL";
- reg = <0 0x100000>;
- };
- partition@80000 {
- label = "U-Boot";
- reg = <0x100000 0x180000>;
- };
- partition@1c0000 {
- label = "Environment";
- reg = <0x280000 0x100000>;
- };
- partition@280000 {
- label = "Kernel";
- reg = <0x380000 0x300000>;
- };
- partition@780000 {
- label = "Filesystem";
- reg = <0x680000 0x1f980000>;
- };
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; /* LEDSYNC */
+ default-state = "on";
};
};
+
+/* On board Wifi module */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+ vmmc-supply = <&lbee1usjyc_pdn>;
+ vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ bus-width = <4>;
+ non-removable;
+};
+
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 72dca0b..202f95a 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -101,8 +101,9 @@
nand@0,0 {
linux,mtd-name= "micron,nand";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
+ gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index d973088..e81fb65 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -363,7 +363,7 @@
<7 0 0x15000000 0x01000000>;
nand@0,0 {
- reg = <0 0 0x1000000>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
/* no elm on omap3 */
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index bc82a12..08ef71f 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -142,6 +142,33 @@
>;
};
+ gpmc_pins: pinmux_gpmc_pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
@@ -585,16 +612,16 @@
};
&gpmc {
- ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
- /* gpio-irq for dma: 65 */
-
+ /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x10000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,sync-write;
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 70addcb..1e49dfe 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -115,12 +115,12 @@
};
&gpmc {
- ranges = <0 0 0x04000000 0x20000000>;
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x20000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,sync-write;
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index d59e3de..b1cb577 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -2,6 +2,49 @@
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
+/ {
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+
+ powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+};
+
&omap3_pmx_core {
smsc2_pins: pinmux_smsc2_pins {
pinctrl-single,pins = <
@@ -9,6 +52,12 @@
OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
>;
};
+
+ tfp410_pins: pinmux_tfp410_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
+ >;
+ };
};
&gpmc {
@@ -22,24 +71,29 @@
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <4 0 0xff>;
bank-width = <2>;
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <1>;
- gpmc,cs-rd-off-ns = <180>;
- gpmc,cs-wr-off-ns = <180>;
- gpmc,adv-rd-off-ns = <18>;
- gpmc,adv-wr-off-ns = <48>;
- gpmc,oe-on-ns = <54>;
- gpmc,oe-off-ns = <168>;
- gpmc,we-on-ns = <54>;
- gpmc,we-off-ns = <168>;
- gpmc,rd-cycle-ns = <186>;
- gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <144>;
- gpmc,page-burst-access-ns = <24>;
- gpmc,bus-turnaround-ns = <90>;
- gpmc,cycle2cycle-delay-ns = <90>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <150>;
+ gpmc,cs-wr-off-ns = <150>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <140>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <140>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <120>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <75>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts
index 42189b6..4ec5d86 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3517.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts
@@ -9,6 +9,10 @@
model = "CompuLab SBC-T3517 with CM-T3517";
compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+ aliases {
+ display0 = &dvi0;
+ };
+
/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
vddvario: regulator-vddvario-sb-t35 {
compatible = "regulator-fixed";
@@ -54,3 +58,13 @@
wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
index bbbeea6..8dfc1df 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3530.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
@@ -8,6 +8,10 @@
/ {
model = "CompuLab SBC-T3530 with CM-T3530";
compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+
+ aliases {
+ display0 = &dvi0;
+ };
};
&omap3_pmx_core {
@@ -34,3 +38,13 @@
&mmc1 {
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index 08e4a70..6b69864 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -8,6 +8,10 @@
/ {
model = "CompuLab SBC-T3730 with CM-T3730";
compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
+
+ aliases {
+ display0 = &dvi0;
+ };
};
&omap3_pmx_core {
@@ -25,3 +29,13 @@
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index b30f387..e89820a 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -270,7 +270,7 @@
ranges = <0 0 0x00000000 0x01000000>;
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d0e884d..8db7def 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -332,6 +332,7 @@
ti,hwmods = "mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
+ #mbox-cells = <1>;
ti,mbox-num-users = <2>;
ti,mbox-num-fifos = <2>;
mbox_dsp: dsp {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 9bad94e..16b0cdf 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -51,8 +51,8 @@
&gpmc {
ranges = <0 0 0x10000000 0x08000000>,
- <1 0 0x28000000 0x08000000>,
- <2 0 0x20000000 0x10000000>;
+ <1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */
+ <2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */
nor@0,0 {
compatible = "cfi-flash";
@@ -106,7 +106,7 @@
linux,mtd-name= "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
- reg = <1 0 0x08000000>;
+ reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
@@ -150,7 +150,7 @@
linux,mtd-name= "samsung,kfm2g16q2m-deb8";
#address-cells = <1>;
#size-cells = <1>;
- reg = <2 0 0x10000000>;
+ reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 878c979..a46eab8 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -661,6 +661,7 @@
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
mbox_ipu: mbox_ipu {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 256b7f6..b321fdf 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -651,6 +651,7 @@
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
mbox_ipu: mbox_ipu {
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index a3ed23c..1518c5b 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -21,7 +21,8 @@
};
chosen {
- bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif2;
};
memory {
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 801a556..277e73c 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -52,16 +52,6 @@
clock-output-names = "usb_x1";
};
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@fcfe0000 {
- #clock-cells = <1>;
- compatible = "renesas,r7s72100-cpg-clocks",
- "renesas,rz-cpg-clocks";
- reg = <0xfcfe0000 0x18>;
- clocks = <&extal_clk>, <&usb_x1_clk>;
- clock-output-names = "pll", "i", "g";
- };
-
/* Fixed factor clocks */
b_clk: b_clk {
#clock-cells = <0>;
@@ -88,6 +78,16 @@
clock-output-names = "p0";
};
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@fcfe0000 {
+ #clock-cells = <1>;
+ compatible = "renesas,r7s72100-cpg-clocks",
+ "renesas,rz-cpg-clocks";
+ reg = <0xfcfe0000 0x18>;
+ clocks = <&extal_clk>, <&usb_x1_clk>;
+ clock-output-names = "pll", "i", "g";
+ };
+
/* MSTP clocks */
mstp3_clks: mstp3_clks@fcfe0420 {
#clock-cells = <1>;
@@ -148,97 +148,6 @@
};
};
- gic: interrupt-controller@e8201000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0xe8201000 0x1000>,
- <0xe8202000 0x1000>;
- };
-
- i2c0: i2c@fcfee000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee000 0x44>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
- <0 158 IRQ_TYPE_EDGE_RISING>,
- <0 159 IRQ_TYPE_EDGE_RISING>,
- <0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c1: i2c@fcfee400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee400 0x44>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 166 IRQ_TYPE_EDGE_RISING>,
- <0 167 IRQ_TYPE_EDGE_RISING>,
- <0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 169 IRQ_TYPE_LEVEL_HIGH>,
- <0 170 IRQ_TYPE_LEVEL_HIGH>,
- <0 171 IRQ_TYPE_LEVEL_HIGH>,
- <0 172 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c2: i2c@fcfee800 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee800 0x44>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
- <0 174 IRQ_TYPE_EDGE_RISING>,
- <0 175 IRQ_TYPE_EDGE_RISING>,
- <0 176 IRQ_TYPE_LEVEL_HIGH>,
- <0 177 IRQ_TYPE_LEVEL_HIGH>,
- <0 178 IRQ_TYPE_LEVEL_HIGH>,
- <0 179 IRQ_TYPE_LEVEL_HIGH>,
- <0 180 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c3: i2c@fcfeec00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfeec00 0x44>;
- interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
- <0 182 IRQ_TYPE_EDGE_RISING>,
- <0 183 IRQ_TYPE_EDGE_RISING>,
- <0 184 IRQ_TYPE_LEVEL_HIGH>,
- <0 185 IRQ_TYPE_LEVEL_HIGH>,
- <0 186 IRQ_TYPE_LEVEL_HIGH>,
- <0 187 IRQ_TYPE_LEVEL_HIGH>,
- <0 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- mtu2: timer@fcff0000 {
- compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
- reg = <0xfcff0000 0x400>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tgi0a";
- clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
- clock-names = "fck";
- status = "disabled";
- };
-
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
@@ -404,4 +313,95 @@
#size-cells = <0>;
status = "disabled";
};
+
+ gic: interrupt-controller@e8201000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xe8201000 0x1000>,
+ <0xe8202000 0x1000>;
+ };
+
+ i2c0: i2c@fcfee000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
+ <0 158 IRQ_TYPE_EDGE_RISING>,
+ <0 159 IRQ_TYPE_EDGE_RISING>,
+ <0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@fcfee400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee400 0x44>;
+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 166 IRQ_TYPE_EDGE_RISING>,
+ <0 167 IRQ_TYPE_EDGE_RISING>,
+ <0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@fcfee800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee800 0x44>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
+ <0 174 IRQ_TYPE_EDGE_RISING>,
+ <0 175 IRQ_TYPE_EDGE_RISING>,
+ <0 176 IRQ_TYPE_LEVEL_HIGH>,
+ <0 177 IRQ_TYPE_LEVEL_HIGH>,
+ <0 178 IRQ_TYPE_LEVEL_HIGH>,
+ <0 179 IRQ_TYPE_LEVEL_HIGH>,
+ <0 180 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fcfeec00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfeec00 0x44>;
+ interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
+ <0 182 IRQ_TYPE_EDGE_RISING>,
+ <0 183 IRQ_TYPE_EDGE_RISING>,
+ <0 184 IRQ_TYPE_LEVEL_HIGH>,
+ <0 185 IRQ_TYPE_LEVEL_HIGH>,
+ <0 186 IRQ_TYPE_LEVEL_HIGH>,
+ <0 187 IRQ_TYPE_LEVEL_HIGH>,
+ <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
index a860f32..84e05f7 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -21,7 +21,8 @@
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel rw";
+ bootargs = "ignore_loglevel rw";
+ stdout-path = &scifa0;
};
memory@40000000 {
@@ -93,6 +94,10 @@
voltage-tolerance = <1>; /* 1% */
};
+&cmt1 {
+ status = "okay";
+};
+
&pfc {
scifa0_pins: serial0 {
renesas,groups = "scifa0_data";
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index ef152e3..7f57dc7 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -30,18 +30,6 @@
};
};
- gic: interrupt-controller@f1001000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
- <0 0xf1004000 0 0x2000>,
- <0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -50,6 +38,91 @@
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ dmac: dma-multiplexer {
+ compatible = "renesas,shdma-mux";
+ #dma-cells = <1>;
+ dma-channels = <20>;
+ dma-requests = <256>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dma0: dma-controller@e6700020 {
+ compatible = "renesas,shdma-r8a73a4";
+ reg = <0 0xe6700020 0 0x89e0>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH
+ 0 215 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19";
+ };
+ };
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a73a4";
+ reg = <0 0xe6050000 0 0x9000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts-extended =
+ <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
+ <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
+ <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+ <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+ <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+ <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+ <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+ <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+ <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
+ <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
+ <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+ <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+ <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+ <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+ <&irqc1 24 0>, <&irqc1 25 0>;
+ };
+
+ i2c5: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x428>;
+ interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
#interrupt-cells = <2>;
@@ -122,48 +195,6 @@
<0 57 IRQ_TYPE_LEVEL_HIGH>;
};
- dmac: dma-multiplexer@0 {
- compatible = "renesas,shdma-mux";
- #dma-cells = <1>;
- dma-channels = <20>;
- dma-requests = <256>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dma0: dma-controller@e6700020 {
- compatible = "renesas,shdma-r8a73a4";
- reg = <0 0xe6700020 0 0x89e0>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH
- 0 215 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14", "ch15",
- "ch16", "ch17", "ch18", "ch19";
- };
- };
-
thermal@e61f0000 {
compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
@@ -216,15 +247,6 @@
status = "disabled";
};
- i2c5: i2c@e60b0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,rmobile-iic";
- reg = <0 0xe60b0000 0 0x428>;
- interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
i2c6: i2c@e6550000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -252,6 +274,20 @@
status = "disabled";
};
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c40000 0 0x100>;
@@ -266,73 +302,20 @@
status = "disabled";
};
- scifb2: serial@e6c20000 {
- compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
- reg = <0 0xe6c20000 0 0x100>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- scifb3: serial@e6c30000 {
- compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
- reg = <0 0xe6c30000 0 0x100>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- scifb4: serial@e6ce0000 {
+ scifb2: serial@e6ce0000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- scifb5: serial@e6cf0000 {
+ scifb3: serial@e6cf0000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6cf0000 0 0x100>;
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- mmcif0: mmc@ee200000 {
- compatible = "renesas,sh-mmcif";
- reg = <0 0xee200000 0 0x80>;
- interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- mmcif1: mmc@ee220000 {
- compatible = "renesas,sh-mmcif";
- reg = <0 0xee220000 0 0x80>;
- interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- pfc: pfc@e6050000 {
- compatible = "renesas,pfc-r8a73a4";
- reg = <0 0xe6050000 0 0x9000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts-extended =
- <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
- <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
- <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
- <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
- <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
- <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
- <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
- <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
- <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
- <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
- <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
- <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
- <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
- <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
- <&irqc1 24 0>, <&irqc1 25 0>;
- };
-
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
@@ -356,4 +339,32 @@
cap-sd-highspeed;
status = "disabled";
};
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ mmcif1: mmc@ee220000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee220000 0 0x80>;
+ interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index effb7b4..d4af4d8 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -25,6 +25,7 @@
chosen {
bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ stdout-path = &scifa1;
};
memory {
@@ -77,7 +78,7 @@
regulator-boot-on;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
power-key {
@@ -298,3 +299,7 @@
status = "okay";
};
+
+&tmu0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index d46c213..aec8da8 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -71,6 +71,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
/* irqpin1: IRQ8 - IRQ15 */
@@ -91,6 +92,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
/* irqpin2: IRQ16 - IRQ23 */
@@ -111,6 +113,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
/* irqpin3: IRQ24 - IRQ31 */
@@ -131,6 +134,7 @@
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
ether: ethernet@e9a00000 {
@@ -193,7 +197,7 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c60000 0x100>;
interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
clock-names = "sci_ick";
status = "disabled";
};
@@ -331,6 +335,34 @@
status = "disabled";
};
+ tmu0: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+ reg = <0xfff80000 0x2c>;
+ interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+ <0 199 IRQ_TYPE_LEVEL_HIGH>,
+ <0 200 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu1: timer@fff90000 {
+ compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+ reg = <0xfff90000 0x2c>;
+ interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -448,8 +480,8 @@
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xe6150138 4>, <0xe6150040 4>;
- clocks = <&sub_clk>, <&sub_clk>,
- <&cpg_clocks R8A7740_CLK_HP>,
+ clocks = <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
+ <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
@@ -458,7 +490,8 @@
<&sub_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7
+ R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
+ R8A7740_CLK_SCIFA7
R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
@@ -467,7 +500,8 @@
R8A7740_CLK_SCIFA4
>;
clock-output-names =
- "scifa6", "scifa7", "dmac1", "dmac2", "dmac3",
+ "scifa6", "intca",
+ "scifa7", "dmac1", "dmac2", "dmac3",
"usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
"scifa2", "scifa3", "scifa4";
};
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index 3342c74..04c0c37 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -28,7 +28,8 @@
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ stdout-path = &scif0;
};
memory {
@@ -73,6 +74,10 @@
status = "okay";
};
+&tmu0 {
+ status = "okay";
+};
+
&pfc {
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 315ec62..ef85339 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -162,6 +162,42 @@
status = "disabled";
};
+ tmu0: timer@ffd80000 {
+ compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+ reg = <0xffd80000 0x30>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu1: timer@ffd81000 {
+ compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+ reg = <0xffd81000 0x30>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>;
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu2: timer@ffd82000 {
+ compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+ reg = <0xffd82000 0x30>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>;
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
scif0: serial@ffe40000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe40000 0x100>;
@@ -215,8 +251,6 @@
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4c000 0x100>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
@@ -224,8 +258,6 @@
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4d000 0x100>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
@@ -233,8 +265,6 @@
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4f000 0x100>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index c160404..e83d40e 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -25,6 +25,7 @@
chosen {
bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
+ stdout-path = &scif2;
};
memory {
@@ -68,6 +69,78 @@
gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
};
};
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ vga_enc_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ vga_enc_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&vga_enc_out>;
+ };
+ };
+ };
+
+ lvds-encoder {
+ compatible = "thine,thc63lvdm83d";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_enc_in: endpoint {
+ remote-endpoint = <&du_out_rgb1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds_connector: endpoint {
+ };
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&vga_enc_in>;
+ };
+ };
+ port@1 {
+ endpoint {
+ remote-endpoint = <&lvds_enc_in>;
+ };
+ };
+ };
};
&irqpin0 {
@@ -83,6 +156,17 @@
};
&pfc {
+ du_pins: du {
+ du0 {
+ renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+ renesas,function = "du0";
+ };
+ du1 {
+ renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+ renesas,function = "du1";
+ };
+ };
+
lan0_pins: lan0 {
intc {
renesas,groups = "intc_irq1_b";
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 7cfba9a..ede9a29 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -303,7 +303,7 @@
};
sata: sata@fc600000 {
- compatible = "renesas,rcar-sata";
+ compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
@@ -314,8 +314,6 @@
reg = <0xffe4c000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
@@ -324,8 +322,6 @@
reg = <0xffe4d000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
@@ -334,8 +330,6 @@
reg = <0xffe4e000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
@@ -344,8 +338,6 @@
reg = <0xffe4f000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
@@ -379,6 +371,30 @@
status = "disabled";
};
+ du: display@fff80000 {
+ compatible = "renesas,du-r8a7779";
+ reg = <0 0xfff80000 0 0x40000>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7779_CLK_DU>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 69098b9..bd470ba 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -19,12 +19,13 @@
compatible = "renesas,lager", "renesas,r8a7790";
aliases {
- serial6 = &scif0;
- serial7 = &scif1;
+ serial6 = &scifa0;
+ serial7 = &scifa1;
};
chosen {
bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scifa0;
};
memory@40000000 {
@@ -42,7 +43,7 @@
#size-cells = <1>;
};
- gpio_keys {
+ keyboard {
compatible = "gpio-keys";
button@1 {
@@ -144,6 +145,56 @@
states = <3300000 1
1800000 0>;
};
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ port@2 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
};
&extal_clk {
@@ -151,17 +202,14 @@
};
&pfc {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
-
du_pins: du {
renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
renesas,function = "du";
};
- scif0_pins: serial0 {
- renesas,groups = "scif0_data";
- renesas,function = "scif0";
+ scifa0_pins: serial0 {
+ renesas,groups = "scifa0_data";
+ renesas,function = "scifa0";
};
ether_pins: ether {
@@ -174,9 +222,9 @@
renesas,function = "intc";
};
- scif1_pins: serial1 {
- renesas,groups = "scif1_data";
- renesas,function = "scif1";
+ scifa1_pins: serial1 {
+ renesas,groups = "scifa1_data";
+ renesas,function = "scifa1";
};
sdhi0_pins: sd0 {
@@ -220,6 +268,11 @@
renesas,function = "iic3";
};
+ hsusb_pins: hsusb {
+ renesas,groups = "usb0_ovc_vbus";
+ renesas,function = "usb0";
+ };
+
usb0_pins: usb0 {
renesas,groups = "usb0";
renesas,function = "usb0";
@@ -308,15 +361,15 @@
};
};
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
+&scifa0 {
+ pinctrl-0 = <&scifa0_pins>;
pinctrl-names = "default";
status = "okay";
};
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
+&scifa1 {
+ pinctrl-0 = <&scifa1_pins>;
pinctrl-names = "default";
status = "okay";
@@ -418,12 +471,29 @@
pinctrl-names = "default";
};
+&xhci {
+ status = "okay";
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+};
+
&pci2 {
status = "okay";
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&hsusb_pins>;
+ pinctrl-names = "default";
+ renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+ status = "okay";
+};
+
/* composite video input */
&vin1 {
pinctrl-0 = <&vin1_pins>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d0e1773..69b7cd0 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -392,11 +392,13 @@
status = "disabled";
};
- mmcif0: mmcif@ee200000 {
+ mmcif0: mmc@ee200000 {
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
};
@@ -406,6 +408,8 @@
reg = <0 0xee220000 0 0x80>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
+ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
+ dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
};
@@ -420,7 +424,6 @@
reg = <0 0xee100000 0 0x200>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
- cap-sd-highspeed;
status = "disabled";
};
@@ -429,7 +432,6 @@
reg = <0 0xee120000 0 0x200>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
- cap-sd-highspeed;
status = "disabled";
};
@@ -438,7 +440,6 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
- cap-sd-highspeed;
status = "disabled";
};
@@ -447,7 +448,6 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
- cap-sd-highspeed;
status = "disabled";
};
@@ -568,6 +568,36 @@
status = "disabled";
};
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7790";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7790";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ clock-names = "usbhs";
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7790";
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
@@ -600,6 +630,96 @@
status = "disabled";
};
+ vsp1@fe920000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe920000 0 0x8000>;
+ interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+
+ renesas,has-sru;
+ renesas,#rpf = <5>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+
+ renesas,has-lut;
+ renesas,has-sru;
+ renesas,#rpf = <5>;
+ renesas,#uds = <3>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe930000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe930000 0 0x8000>;
+ interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe938000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe938000 0 0x8000>;
+ interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7790";
+ reg = <0 0xfeb00000 0 0x70000>,
+ <0 0xfeb90000 0 0x1c>,
+ <0 0xfeb94000 0 0x1c>;
+ reg-names = "du", "lvds.0", "lvds.1";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>,
+ <0 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+ <&mstp7_clks R8A7790_CLK_DU1>,
+ <&mstp7_clks R8A7790_CLK_DU2>,
+ <&mstp7_clks R8A7790_CLK_LVDS0>,
+ <&mstp7_clks R8A7790_CLK_LVDS1>;
+ clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds1: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -868,18 +988,25 @@
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
- <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
- <&zs_clk>;
+ clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>,
+ <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>,
+ <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
- R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
- R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
+ R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1
+ R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1
+ R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC
+ R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0
+ R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0
+ R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0
+ R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
>;
clock-output-names =
- "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
- "vsp1-du0", "vsp1-rt", "vsp1-sy";
+ "vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1",
+ "tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1",
+ "fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0",
+ "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1070,6 +1197,16 @@
status = "disabled";
};
+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7790";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ phys = <&usb2 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
@@ -1088,6 +1225,20 @@
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
};
pci1: pci@ee0b0000 {
@@ -1128,6 +1279,20 @@
interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
};
pciec: pcie@fe000000 {
@@ -1155,7 +1320,7 @@
status = "disabled";
};
- rcar_sound: rcar_sound@0xec500000 {
+ rcar_sound: rcar_sound@ec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
reg = <0 0xec500000 0 0x1000>, /* SCU */
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index f1b56de1..740e386 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -23,6 +23,7 @@
chosen {
bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif0;
};
memory@40000000 {
@@ -271,6 +272,17 @@
pinctrl-names = "default";
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+ status = "okay";
+};
+
&pcie_bus_clk {
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 07550e7..0d0cde7 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -26,6 +26,7 @@
chosen {
bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif0;
};
memory@40000000 {
@@ -43,7 +44,7 @@
#size-cells = <1>;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
key-1 {
@@ -211,14 +212,24 @@
};
};
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+};
+
&extal_clk {
clock-frequency = <20000000>;
};
&pfc {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
-
i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
@@ -463,6 +474,17 @@
pinctrl-names = "default";
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+ status = "okay";
+};
+
&pcie_bus_clk {
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index e06c11f..9a57215 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Source for the r8a7791 SoC
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded Inc.
*
@@ -400,6 +400,17 @@
#gpio-range-cells = <3>;
};
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee100000 0 0x200>;
@@ -613,6 +624,36 @@
status = "disabled";
};
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7791";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7791";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+ clock-names = "usbhs";
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7791";
clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
@@ -637,6 +678,75 @@
status = "disabled";
};
+ vsp1@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+
+ renesas,has-lut;
+ renesas,has-sru;
+ renesas,#rpf = <5>;
+ renesas,#uds = <3>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe930000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe930000 0 0x8000>;
+ interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe938000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe938000 0 0x8000>;
+ interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7791";
+ reg = <0 0xfeb00000 0 0x40000>,
+ <0 0xfeb90000 0 0x1c>;
+ reg-names = "du", "lvds.0";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+ <&mstp7_clks R8A7791_CLK_DU1>,
+ <&mstp7_clks R8A7791_CLK_LVDS0>;
+ clock-names = "du.0", "du.1", "lvds.0";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -889,17 +999,23 @@
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
- <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
+ clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>,
+ <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+ <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
- R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
- R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
+ R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU
+ R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG
+ R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0
+ R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0
+ R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0
+ R8A7791_CLK_VSP1_S
>;
clock-output-names =
- "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
- "vsp1-du0", "vsp1-sy";
+ "vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg",
+ "2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0",
+ "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1088,6 +1204,16 @@
status = "disabled";
};
+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7791";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
+ phys = <&usb2 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7791";
device_type = "pci";
@@ -1106,6 +1232,20 @@
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
};
pci1: pci@ee0d0000 {
@@ -1126,6 +1266,20 @@
interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
};
pciec: pcie@fe000000 {
@@ -1153,7 +1307,7 @@
status = "disabled";
};
- rcar_sound: rcar_sound@0xec500000 {
+ rcar_sound: rcar_sound@ec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
reg = <0 0xec500000 0 0x1000>, /* SCU */
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 79d06ef0..f2cf757 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -20,7 +20,8 @@
};
chosen {
- bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif2;
};
memory@40000000 {
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index d4e8bce..088e79c 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -82,6 +82,14 @@
status = "disabled";
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7794", "renesas,irqc";
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
new file mode 100644
index 0000000..65cb50f
--- /dev/null
+++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ panel {
+ compatible = "mitsubishi,aa104xd12", "panel-dpi";
+
+ width-mm = <210>;
+ height-mm = <158>;
+
+ panel-timing {
+ /* 1024x768 @65Hz */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hsync-len = <136>;
+ hfront-porch = <20>;
+ hback-porch = <160>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_connector>;
+ };
+ };
+ };
+};
+
+&lvds_connector {
+ remote-endpoint = <&panel_in>;
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index d534451..baf21ac 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -60,6 +60,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_arm>;
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index ad9c2db..0e99470 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -26,11 +26,21 @@
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
+ operating-points = <
+ /* kHz uV */
+ 1008000 1075000
+ 816000 1025000
+ 600000 1025000
+ 504000 1000000
+ 312000 975000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu@1 {
device_type = "cpu";
@@ -53,6 +63,51 @@
};
};
+ i2s0: i2s@10118000 {
+ compatible = "rockchip,rk3066-i2s";
+ reg = <0x10118000 0x2000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ dmas = <&dmac1_s 4>, <&dmac1_s 5>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@1011a000 {
+ compatible = "rockchip,rk3066-i2s";
+ reg = <0x1011a000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
+ dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@1011c000 {
+ compatible = "rockchip,rk3066-i2s";
+ reg = <0x1011c000 0x2000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
+ dmas = <&dmac1_s 9>, <&dmac1_s 10>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+ status = "disabled";
+ };
+
cru: clock-controller@20000000 {
compatible = "rockchip,rk3066a-cru";
reg = <0x20000000 0x1000>;
@@ -405,6 +460,42 @@
<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
};
};
+
+ i2s0 {
+ i2s0_bus: i2s0-bus {
+ rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ i2s1 {
+ i2s1_bus: i2s1-bus {
+ rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ i2s2 {
+ i2s2_bus: i2s2-bus {
+ rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 15910c9..0950a05 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -118,6 +118,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_arm>;
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -159,7 +163,7 @@
vdd_arm: REG3 {
regulator-name = "VDD_ARM";
regulator-min-microvolt = <875000>;
- regulator-max-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ddaada7..b24e04f 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -26,11 +26,24 @@
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
+ operating-points = <
+ /* kHz uV */
+ 1608000 1350000
+ 1416000 1250000
+ 1200000 1150000
+ 1008000 1075000
+ 816000 975000
+ 600000 950000
+ 504000 925000
+ 312000 875000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu@1 {
device_type = "cpu";
@@ -65,6 +78,21 @@
};
};
+ i2s0: i2s@1011a000 {
+ compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
+ reg = <0x1011a000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ status = "disabled";
+ };
+
cru: clock-controller@20000000 {
compatible = "rockchip,rk3188-cru";
reg = <0x20000000 0x1000>;
@@ -395,6 +423,17 @@
<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
};
};
+
+ i2s0 {
+ i2s0_bus: i2s0-bus {
+ rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index ff522f8..d8c775e6 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -17,6 +17,10 @@
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
};
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
&i2c0 {
clock-frequency = <400000>;
status = "okay";
@@ -44,7 +48,7 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 874e66d..cfc4378 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -47,10 +47,27 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@500 {
+ cpu0: cpu@500 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x500>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu@501 {
device_type = "cpu";
@@ -177,6 +194,8 @@
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 11>, <&dmac_peri 12>;
+ dma-names = "tx", "rx";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
@@ -190,6 +209,8 @@
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 13>, <&dmac_peri 14>;
+ dma-names = "tx", "rx";
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
@@ -203,6 +224,8 @@
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 15>, <&dmac_peri 16>;
+ dma-names = "tx", "rx";
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
@@ -455,6 +478,16 @@
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru PLL_NPLL>, <&cru ACLK_CPU>,
+ <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+ <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+ <&cru PCLK_PERI>;
+ assigned-clock-rates = <594000000>, <400000000>,
+ <500000000>, <300000000>,
+ <150000000>, <75000000>,
+ <300000000>, <150000000>,
+ <75000000>;
};
grf: syscon@ff770000 {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 499468d..9ba92de 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -367,6 +367,8 @@
reg = <0x20070000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmac2 10>, <&dmac2 11>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -378,6 +380,8 @@
reg = <0x20074000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmac2 12>, <&dmac2 13>;
+ dma-names = "tx", "rx";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 57e00f9..a25debb 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -198,10 +198,6 @@
status = "okay";
};
-&pwm {
- status = "okay";
-};
-
&pinctrl0 {
gpio_leds: gpio-leds {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index ff5bdaa..0ccb414 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -172,7 +172,6 @@
clocks = <&clocks PCLK_PWM>;
samsung,pwm-outputs = <0>, <1>;
#pwm-cells = <3>;
- status = "disabled";
};
pinctrl0: pinctrl@7f008000 {
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index e0157b0..1b0f30c 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -9,12 +9,12 @@
* licensing only applies to this file, and not this project as a
* whole.
*
- * a) This library is free software; you can redistribute it and/or
+ * a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This library is distributed in the hope that it will be useful,
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
@@ -45,6 +45,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
@@ -302,6 +303,15 @@
#size-cells = <1>;
ranges;
+ dma1: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0004000 0x200>;
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&dma1_clk>;
+ clock-names = "dma_clk";
+ };
+
ramc0: ramc@f0010000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf0010000 0x200>;
@@ -309,6 +319,15 @@
clock-names = "ddrck", "mpddr";
};
+ dma0: dma-controller@f0014000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0014000 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
+ };
+
pmc: pmc@f0018000 {
compatible = "atmel,sama5d3-pmc";
reg = <0xf0018000 0x120>;
@@ -761,6 +780,10 @@
compatible = "atmel,hsmci";
reg = <0xf8000000 0x600>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(0))>;
+ dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
status = "disabled";
@@ -776,6 +799,13 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf8010000 0x100>;
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(10))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(11))>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&spi0_clk>;
@@ -787,6 +817,13 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x4000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(2))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(3))>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
@@ -817,7 +854,14 @@
i2c2: i2c@f8024000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8024000 0x4000>;
- interrupts = <34 4 6>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(6))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
#address-cells = <1>;
@@ -830,6 +874,10 @@
compatible = "atmel,hsmci";
reg = <0xfc000000 0x600>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(1))>;
+ dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
status = "disabled";
@@ -843,6 +891,13 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xfc008000 0x100>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(16))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(17))>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
clocks = <&usart2_clk>;
@@ -854,6 +909,13 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xfc00c000 0x100>;
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(18))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(19))>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
clocks = <&usart3_clk>;
@@ -865,6 +927,13 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xfc010000 0x100>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(20))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(21))>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart4>;
clocks = <&usart4_clk>;
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 30ef97e..3721cd4 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -40,6 +40,7 @@
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ stdout-path = &scifa4;
};
memory {
@@ -112,7 +113,7 @@
};
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
back-key {
@@ -250,7 +251,7 @@
};
};
- ak4648: ak4648@0x12 {
+ ak4648: ak4648@12 {
#sound-dai-cells = <0>;
compatible = "asahi-kasei,ak4648";
reg = <0x12>;
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
new file mode 100644
index 0000000..a8c00ee
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "ste-nomadik-stn8815.dtsi"
+
+/ {
+ model = "Nomadik STN8815NHK";
+ compatible = "st,nomadik-nhk-15";
+
+ chosen {
+ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+ };
+
+ aliases {
+ stmpe-i2c0 = &stmpe0;
+ stmpe-i2c1 = &stmpe1;
+ };
+
+ pinctrl {
+ stmpe2401_1 {
+ stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
+ nhk_cfg1 {
+ ste,pins = "GPIO76_B20"; // IRQ line
+ ste,input = <0>;
+ };
+ nhk_cfg2 {
+ ste,pins = "GPIO77_B8"; // reset line
+ ste,output = <1>;
+ };
+ };
+ };
+ stmpe2401_2 {
+ stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
+ nhk_cfg1 {
+ ste,pins = "GPIO78_A8"; // IRQ line
+ ste,input = <0>;
+ };
+ nhk_cfg2 {
+ ste,pins = "GPIO79_C9"; // reset line
+ ste,output = <1>;
+ };
+ };
+ };
+ };
+
+ src@101e0000 {
+ /* These chrystal outputs are not used on this board */
+ disable-sxtalo;
+ disable-mxtalo;
+ };
+
+ /* This is where the interrupt is routed on the NHK-15 debug board */
+ external-bus@34000000 {
+ compatible = "simple-bus";
+ reg = <0x34000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x34000000 0x1000000>;
+ ethernet@300 {
+ compatible = "smsc,lan91c111";
+ reg = <0x300 0x0fd00>;
+ reg-io-width = <2>;
+ reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&stmpe_gpio44>;
+ interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ i2c0 {
+ stmpe0: stmpe2401@43 {
+ compatible = "st,stmpe2401";
+ reg = <0x43>;
+ reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
+ interrupt-parent = <&gpio2>;
+ interrupt-controller;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&stmpe2401_1_nhk_mode>;
+ stmpe_gpio43: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* Some pins in alternate functions */
+ st,norequest-mask = <0xf0f002>;
+ };
+ stmpe_keypad {
+ compatible = "st,stmpe-keypad";
+ debounce-interval = <64>;
+ st,scan-count = <8>;
+ st,no-autorepeat;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x00020072 // Vol down
+ 0x00030073 // Vol up
+ 0x0100009e // Back
+ 0x010100e3 // TV out
+ 0x01020098 // Lock
+ 0x0103013b // Start
+ 0x020000a3 // Next
+ 0x020100a4 // Play
+ 0x020200a5 // Prev
+ 0x02030160 // OK
+ 0x03000069 // Left
+ 0x0301006a // Right
+ 0x03020067 // Up
+ 0x0303006c>; // Down
+ };
+ };
+ stmpe1: stmpe2401@44 {
+ compatible = "st,stmpe2401";
+ reg = <0x44>;
+ reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
+ interrupt-parent = <&gpio2>;
+ interrupt-controller;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&stmpe2401_2_nhk_mode>;
+ stmpe_gpio44: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+ };
+
+ amba {
+ mmcsd: sdi@101f6000 {
+ cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* Custom board node with GPIO pins to active etc */
+ usb-s8815 {
+ /* This will turn off SATA so that MMC/SD can thrive */
+ mmcsd-gpio {
+ gpios = <&stmpe_gpio44 2 0x1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 90d8b6c..e411ff7 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -4,6 +4,7 @@
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
#include "ste-nomadik-stn8815.dtsi"
/ {
@@ -14,14 +15,6 @@
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
- /* This is where the interrupt is routed on the S8815 board */
- external-bus@34000000 {
- ethernet@300 {
- interrupt-parent = <&gpio3>;
- interrupts = <8 0x1>;
- };
- };
-
src@101e0000 {
/* These chrystal drivers are not used on this board */
disable-sxtalo;
@@ -47,6 +40,14 @@
};
};
};
+ gpioi2c {
+ gpioi2c_default_mode: gpioi2c_default {
+ gpioi2c_default_cfg {
+ ste,pins = "GPIO73_C21", "GPIO74_C20";
+ ste,input = <0>;
+ };
+ };
+ };
user-led {
user_led_default_mode: user_led_default {
user_led_default_cfg {
@@ -65,6 +66,45 @@
};
};
+ /* Ethernet */
+ external-bus@34000000 {
+ compatible = "simple-bus";
+ reg = <0x34000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x34000000 0x1000000>;
+ ethernet@300 {
+ compatible = "smsc,lan91c111";
+ reg = <0x300 0x0fd00>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ /* GPIO I2C connected to the USB portions of the STw4811 only */
+ gpio-i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gpio2 10 0>, /* sda */
+ <&gpio2 9 0>; /* scl */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpioi2c_default_mode>;
+
+ stw4811@2d {
+ compatible = "st,stw4811-usb";
+ reg = <0x2d>;
+ };
+ };
+
+
+ /* Configure card detect for the uSD slot */
+ amba {
+ mmcsd: sdi@101f6000 {
+ cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* This will bias the MMC/SD card detect line */
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index dbcf521..f435ff2 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -117,7 +117,7 @@
mmcsd_default_mux: mmcsd_mux {
mmcsd_default_mux {
ste,function = "mmcsd";
- ste,pins = "mmcsd_a_1";
+ ste,pins = "mmcsd_a_1", "mmcsd_b_1";
};
};
mmcsd_default_mode: mmcsd_default {
@@ -127,9 +127,9 @@
ste,output = <0>;
};
mmcsd_default_cfg2 {
- /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
+ /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
ste,pins = "GPIO10_C11", "GPIO15_A12",
- "GPIO16_C13";
+ "GPIO16_C13", "GPIO23_D15";
ste,output = <1>;
};
mmcsd_default_cfg3 {
@@ -169,21 +169,11 @@
};
};
};
- i2c2 {
- i2c2_default_mode: i2c2_default {
- i2c2_default_cfg {
- ste,pins = "GPIO73_C21", "GPIO74_C20";
- ste,input = <0>;
- };
- };
- };
};
src: src@101e0000 {
compatible = "stericsson,nomadik-src";
reg = <0x101e0000 0x1000>;
- disable-sxtalo;
- disable-mxtalo;
/*
* MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
@@ -683,18 +673,6 @@
};
};
- external-bus@34000000 {
- compatible = "simple-bus";
- reg = <0x34000000 0x1000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x34000000 0x1000000>;
- ethernet@300 {
- compatible = "smsc,lan91c111";
- reg = <0x300 0x0fd00>;
- };
- };
-
/* I2C0 connected to the STw4811 power management chip */
i2c0 {
compatible = "st,nomadik-i2c", "arm,primecell";
@@ -749,22 +727,6 @@
};
};
- /* I2C2 connected to the USB portions of the STw4811 only */
- i2c2 {
- compatible = "i2c-gpio";
- gpios = <&gpio2 10 0>, /* sda */
- <&gpio2 9 0>; /* scl */
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_default_mode>;
-
- stw4811@2d {
- compatible = "st,stw4811-usb";
- reg = <0x2d>;
- };
- };
-
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
@@ -844,7 +806,6 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
vmmc-supply = <&vmmc_regulator>;
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 800f46f..e65744f 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -5,8 +5,13 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/stih407-clks.h>
/ {
clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
/*
* Fixed 30MHz oscillator inputs to SoC
*/
@@ -19,10 +24,59 @@
/*
* ARM Peripheral clock for timers
*/
- arm_periph_clk: arm-periph-clk {
+ arm_periph_clk: clk-m-a9-periphs {
#clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <600000000>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * A9 PLL.
+ */
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks.
+ */
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
};
/*
@@ -35,5 +89,238 @@
clock-frequency = <200000000>;
clock-output-names = "clk-s-icn-reg-0";
};
+
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0";
+ };
+ };
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-C", "st,quadfs";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };
+
+ clk_s_c0: clockgen-c@09103000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9103000 0x1000>;
+
+ clk_s_c0_pll0: clk-s-c0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll0-odf-0";
+ };
+
+ clk_s_c0_pll1: clk-s-c0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll1-odf-0";
+ };
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp";
+ };
+ };
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0@09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2@x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "clk-pix-pip",
+ "clk-pix-gdp1",
+ "clk-pix-gdp2",
+ "clk-pix-gdp3",
+ "clk-pix-gdp4",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "clk-tmds-hdmi",
+ "clk-ref-hdmiphy";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3@9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 4f9024f..50637f5 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -8,6 +8,7 @@
*/
#include "stih407-clock.dtsi"
#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/reset-controller/stih407-resets.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -63,6 +64,21 @@
ranges;
compatible = "simple-bus";
+ powerdown: powerdown-controller {
+ compatible = "st,stih407-powerdown";
+ #reset-cells = <1>;
+ };
+
+ softreset: softreset-controller {
+ compatible = "st,stih407-softreset";
+ #reset-cells = <1>;
+ };
+
+ picophyreset: picophyreset-controller {
+ compatible = "st,stih407-picophyreset";
+ #reset-cells = <1>;
+ };
+
syscfg_sbc: sbc-syscfg@9620000 {
compatible = "st,stih407-sbc-syscfg", "syscon";
reg = <0x9620000 0x1000>;
@@ -104,7 +120,7 @@
interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial0>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
status = "disabled";
};
@@ -115,7 +131,7 @@
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial1>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
status = "disabled";
};
@@ -126,7 +142,7 @@
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
status = "disabled";
};
@@ -158,7 +174,7 @@
compatible = "st,comms-ssc4-i2c";
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x9840000 0x110>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -171,7 +187,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0x9841000 0x110>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -184,7 +200,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0x9842000 0x110>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -197,7 +213,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0x9843000 0x110>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -210,7 +226,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0x9844000 0x110>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -223,7 +239,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0x9845000 0x110>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index 8509a03..3791ad9 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -11,33 +11,33 @@
/ {
aliases {
- gpio0 = &PIO0;
- gpio1 = &PIO1;
- gpio2 = &PIO2;
- gpio3 = &PIO3;
- gpio4 = &PIO4;
- gpio5 = &PIO5;
- gpio6 = &PIO6;
- gpio7 = &PIO7;
- gpio8 = &PIO8;
- gpio9 = &PIO9;
- gpio10 = &PIO10;
- gpio11 = &PIO11;
- gpio12 = &PIO12;
- gpio13 = &PIO13;
- gpio14 = &PIO14;
- gpio15 = &PIO15;
- gpio16 = &PIO16;
- gpio17 = &PIO17;
- gpio18 = &PIO18;
- gpio19 = &PIO100;
- gpio20 = &PIO101;
- gpio21 = &PIO102;
- gpio22 = &PIO103;
- gpio23 = &PIO104;
- gpio24 = &PIO105;
- gpio25 = &PIO106;
- gpio26 = &PIO107;
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio5;
+ gpio6 = &pio6;
+ gpio7 = &pio7;
+ gpio8 = &pio8;
+ gpio9 = &pio9;
+ gpio10 = &pio10;
+ gpio11 = &pio11;
+ gpio12 = &pio12;
+ gpio13 = &pio13;
+ gpio14 = &pio14;
+ gpio15 = &pio15;
+ gpio16 = &pio16;
+ gpio17 = &pio17;
+ gpio18 = &pio18;
+ gpio19 = &pio100;
+ gpio20 = &pio101;
+ gpio21 = &pio102;
+ gpio22 = &pio103;
+ gpio23 = &pio104;
+ gpio24 = &pio105;
+ gpio25 = &pio106;
+ gpio26 = &pio107;
};
soc {
@@ -52,7 +52,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x5000>;
- PIO0: gpio@fe610000 {
+ pio0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -60,7 +60,7 @@
reg = <0 0x100>;
st,bank-name = "PIO0";
};
- PIO1: gpio@fe611000 {
+ pio1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -68,7 +68,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- PIO2: gpio@fe612000 {
+ pio2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -76,7 +76,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- PIO3: gpio@fe613000 {
+ pio3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -84,7 +84,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- PIO4: gpio@fe614000 {
+ pio4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -96,8 +96,8 @@
sbc_serial1 {
pinctrl_sbc_serial1:sbc_serial1 {
st,pins {
- tx = <&PIO2 6 ALT3 OUT>;
- rx = <&PIO2 7 ALT3 IN>;
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
};
};
};
@@ -105,15 +105,15 @@
keyscan {
pinctrl_keyscan: keyscan {
st,pins {
- keyin0 = <&PIO0 2 ALT2 IN>;
- keyin1 = <&PIO0 3 ALT2 IN>;
- keyin2 = <&PIO0 4 ALT2 IN>;
- keyin3 = <&PIO2 6 ALT2 IN>;
+ keyin0 = <&pio0 2 ALT2 IN>;
+ keyin1 = <&pio0 3 ALT2 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
- keyout0 = <&PIO1 6 ALT2 OUT>;
- keyout1 = <&PIO1 7 ALT2 OUT>;
- keyout2 = <&PIO0 6 ALT2 OUT>;
- keyout3 = <&PIO2 7 ALT2 OUT>;
+ keyout0 = <&pio1 6 ALT2 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
};
};
};
@@ -121,8 +121,8 @@
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
- sda = <&PIO4 6 ALT1 BIDIR>;
- scl = <&PIO4 5 ALT1 BIDIR>;
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
};
};
};
@@ -130,8 +130,8 @@
sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins {
- sda = <&PIO3 2 ALT2 BIDIR>;
- scl = <&PIO3 1 ALT2 BIDIR>;
+ sda = <&pio3 2 ALT2 BIDIR>;
+ scl = <&pio3 1 ALT2 BIDIR>;
};
};
};
@@ -139,7 +139,7 @@
rc{
pinctrl_ir: ir0 {
st,pins {
- ir = <&PIO4 0 ALT2 IN>;
+ ir = <&pio4 0 ALT2 IN>;
};
};
};
@@ -147,49 +147,49 @@
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- col = <&PIO0 7 ALT1 IN BYPASS 1000>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
- mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
- rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
- rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
+ rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
- clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
@@ -206,7 +206,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x8000>;
- PIO5: gpio@fee00000 {
+ pio5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -214,7 +214,7 @@
reg = <0 0x100>;
st,bank-name = "PIO5";
};
- PIO6: gpio@fee01000 {
+ pio6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -222,7 +222,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
- PIO7: gpio@fee02000 {
+ pio7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -230,7 +230,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
- PIO8: gpio@fee03000 {
+ pio8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -238,7 +238,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
- PIO9: gpio@fee04000 {
+ pio9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -246,7 +246,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
- PIO10: gpio@fee05000 {
+ pio10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -254,7 +254,7 @@
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
- PIO11: gpio@fee06000 {
+ pio11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -262,7 +262,7 @@
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
- PIO12: gpio@fee07000 {
+ pio12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -274,8 +274,8 @@
i2c0 {
pinctrl_i2c0_default: i2c0-default {
st,pins {
- sda = <&PIO9 3 ALT1 BIDIR>;
- scl = <&PIO9 2 ALT1 BIDIR>;
+ sda = <&pio9 3 ALT1 BIDIR>;
+ scl = <&pio9 2 ALT1 BIDIR>;
};
};
};
@@ -283,8 +283,8 @@
i2c1 {
pinctrl_i2c1_default: i2c1-default {
st,pins {
- sda = <&PIO12 1 ALT1 BIDIR>;
- scl = <&PIO12 0 ALT1 BIDIR>;
+ sda = <&pio12 1 ALT1 BIDIR>;
+ scl = <&pio12 0 ALT1 BIDIR>;
};
};
};
@@ -301,7 +301,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x8000>;
- PIO13: gpio@fe820000 {
+ pio13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -309,7 +309,7 @@
reg = <0 0x100>;
st,bank-name = "PIO13";
};
- PIO14: gpio@fe821000 {
+ pio14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -317,7 +317,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
- PIO15: gpio@fe822000 {
+ pio15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -325,7 +325,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
- PIO16: gpio@fe823000 {
+ pio16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -333,7 +333,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
- PIO17: gpio@fe824000 {
+ pio17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -341,7 +341,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
- PIO18: gpio@fe825000 {
+ pio18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -353,8 +353,8 @@
serial2 {
pinctrl_serial2: serial2-0 {
st,pins {
- tx = <&PIO17 4 ALT2 OUT>;
- rx = <&PIO17 5 ALT2 IN>;
+ tx = <&pio17 4 ALT2 OUT>;
+ rx = <&pio17 5 ALT2 IN>;
};
};
};
@@ -362,73 +362,94 @@
gmac0{
pinctrl_mii0: mii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>;
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>;
};
};
pinctrl_gmii0: gmii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
};
};
};
+
+ mmc0 {
+ pinctrl_mmc0: mmc0 {
+ st,pins {
+ mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
+ wp = <&pio15 3 ALT4 IN>;
+ data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
+ data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
+ pwr = <&pio17 1 ALT4 OUT>;
+ cd = <&pio17 2 ALT4 IN>;
+ led = <&pio17 3 ALT4 OUT>;
+ };
+ };
+ };
};
pin-controller-left {
@@ -442,7 +463,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
- PIO100: gpio@fd6b0000 {
+ pio100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -450,7 +471,7 @@
reg = <0 0x100>;
st,bank-name = "PIO100";
};
- PIO101: gpio@fd6b1000 {
+ pio101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -458,7 +479,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
- PIO102: gpio@fd6b2000 {
+ pio102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -479,7 +500,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
- PIO103: gpio@fd330000 {
+ pio103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -487,7 +508,7 @@
reg = <0 0x100>;
st,bank-name = "PIO103";
};
- PIO104: gpio@fd331000 {
+ pio104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -495,7 +516,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
- PIO105: gpio@fd332000 {
+ pio105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -503,7 +524,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
- PIO106: gpio@fd333000 {
+ pio106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -511,7 +532,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO106";
};
- PIO107: gpio@fd334000 {
+ pio107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index a0f6f75..9198c12 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -218,5 +218,17 @@
resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>,
<&softreset STIH415_KEYSCAN_SOFTRESET>;
};
+
+ mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
index 4e2df66..5d1543b 100644
--- a/arch/arm/boot/dts/stih416-b2020.dts
+++ b/arch/arm/boot/dts/stih416-b2020.dts
@@ -12,4 +12,26 @@
/ {
model = "STiH416 B2020";
compatible = "st,stih416-b2020", "st,stih416";
+
+ soc {
+ mmc1: sdhci@fe81f000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ miphy365x_phy: miphy365x@fe382000 {
+ phy_port0: port@fe382000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@fe38a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
+
+ sata0: sata@fe380000{
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index ba0fa2c..956fab8 100644
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -19,17 +19,37 @@
red {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO4 1>;
+ gpios = <&pio4 1>;
linux,default-trigger = "heartbeat";
};
green {
- gpios = <&PIO1 3>;
+ gpios = <&pio1 3>;
default-state = "off";
};
};
ethernet1: dwmac@fef08000 {
- snps,reset-gpio = <&PIO0 7>;
+ snps,reset-gpio = <&pio0 7>;
+ };
+
+ mmc1: sdhci@fe81f000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ miphy365x_phy: miphy365x@fe382000 {
+ phy_port0: port@fe382000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@fe38a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
+
+ sata0: sata@fe380000{
+ status = "okay";
};
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index ee6c119..c2025bc 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -12,36 +12,36 @@
/ {
aliases {
- gpio0 = &PIO0;
- gpio1 = &PIO1;
- gpio2 = &PIO2;
- gpio3 = &PIO3;
- gpio4 = &PIO4;
- gpio5 = &PIO40;
- gpio6 = &PIO5;
- gpio7 = &PIO6;
- gpio8 = &PIO7;
- gpio9 = &PIO8;
- gpio10 = &PIO9;
- gpio11 = &PIO10;
- gpio12 = &PIO11;
- gpio13 = &PIO12;
- gpio14 = &PIO30;
- gpio15 = &PIO31;
- gpio16 = &PIO13;
- gpio17 = &PIO14;
- gpio18 = &PIO15;
- gpio19 = &PIO16;
- gpio20 = &PIO17;
- gpio21 = &PIO18;
- gpio22 = &PIO100;
- gpio23 = &PIO101;
- gpio24 = &PIO102;
- gpio25 = &PIO103;
- gpio26 = &PIO104;
- gpio27 = &PIO105;
- gpio28 = &PIO106;
- gpio29 = &PIO107;
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio40;
+ gpio6 = &pio5;
+ gpio7 = &pio6;
+ gpio8 = &pio7;
+ gpio9 = &pio8;
+ gpio10 = &pio9;
+ gpio11 = &pio10;
+ gpio12 = &pio11;
+ gpio13 = &pio12;
+ gpio14 = &pio30;
+ gpio15 = &pio31;
+ gpio16 = &pio13;
+ gpio17 = &pio14;
+ gpio18 = &pio15;
+ gpio19 = &pio16;
+ gpio20 = &pio17;
+ gpio21 = &pio18;
+ gpio22 = &pio100;
+ gpio23 = &pio101;
+ gpio24 = &pio102;
+ gpio25 = &pio103;
+ gpio26 = &pio104;
+ gpio27 = &pio105;
+ gpio28 = &pio106;
+ gpio29 = &pio107;
};
soc {
@@ -56,7 +56,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x6000>;
- PIO0: gpio@fe610000 {
+ pio0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -64,7 +64,7 @@
reg = <0 0x100>;
st,bank-name = "PIO0";
};
- PIO1: gpio@fe611000 {
+ pio1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -72,7 +72,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- PIO2: gpio@fe612000 {
+ pio2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -80,7 +80,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- PIO3: gpio@fe613000 {
+ pio3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -88,7 +88,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- PIO4: gpio@fe614000 {
+ pio4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -96,7 +96,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO4";
};
- PIO40: gpio@fe615000 {
+ pio40: gpio@fe615000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -109,15 +109,15 @@
rc{
pinctrl_ir: ir0 {
st,pins {
- ir = <&PIO4 0 ALT2 IN>;
+ ir = <&pio4 0 ALT2 IN>;
};
};
};
sbc_serial1 {
pinctrl_sbc_serial1: sbc_serial1 {
st,pins {
- tx = <&PIO2 6 ALT3 OUT>;
- rx = <&PIO2 7 ALT3 IN>;
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
};
};
};
@@ -125,15 +125,15 @@
keyscan {
pinctrl_keyscan: keyscan {
st,pins {
- keyin0 = <&PIO0 2 ALT2 IN>;
- keyin1 = <&PIO0 3 ALT2 IN>;
- keyin2 = <&PIO0 4 ALT2 IN>;
- keyin3 = <&PIO2 6 ALT2 IN>;
+ keyin0 = <&pio0 2 ALT2 IN>;
+ keyin1 = <&pio0 3 ALT2 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
- keyout0 = <&PIO1 6 ALT2 OUT>;
- keyout1 = <&PIO1 7 ALT2 OUT>;
- keyout2 = <&PIO0 6 ALT2 OUT>;
- keyout3 = <&PIO2 7 ALT2 OUT>;
+ keyout0 = <&pio1 6 ALT2 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
};
};
};
@@ -141,8 +141,8 @@
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
- sda = <&PIO4 6 ALT1 BIDIR>;
- scl = <&PIO4 5 ALT1 BIDIR>;
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
};
};
};
@@ -150,8 +150,8 @@
sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins {
- sda = <&PIO3 2 ALT2 BIDIR>;
- scl = <&PIO3 1 ALT2 BIDIR>;
+ sda = <&pio3 2 ALT2 BIDIR>;
+ scl = <&pio3 1 ALT2 BIDIR>;
};
};
};
@@ -159,51 +159,51 @@
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- col = <&PIO0 7 ALT1 IN BYPASS 1000>;
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
- mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
- rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
- rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
+ rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
- clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
@@ -220,7 +220,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x10000>;
- PIO5: gpio@fee00000 {
+ pio5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -228,7 +228,7 @@
reg = <0 0x100>;
st,bank-name = "PIO5";
};
- PIO6: gpio@fee01000 {
+ pio6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -236,7 +236,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
- PIO7: gpio@fee02000 {
+ pio7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -244,7 +244,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
- PIO8: gpio@fee03000 {
+ pio8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -252,7 +252,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
- PIO9: gpio@fee04000 {
+ pio9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -260,7 +260,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
- PIO10: gpio@fee05000 {
+ pio10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -268,7 +268,7 @@
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
- PIO11: gpio@fee06000 {
+ pio11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -276,7 +276,7 @@
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
- PIO12: gpio@fee07000 {
+ pio12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -284,7 +284,7 @@
reg = <0x7000 0x100>;
st,bank-name = "PIO12";
};
- PIO30: gpio@fee08000 {
+ pio30: gpio@fee08000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -292,7 +292,7 @@
reg = <0x8000 0x100>;
st,bank-name = "PIO30";
};
- PIO31: gpio@fee09000 {
+ pio31: gpio@fee09000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -304,7 +304,7 @@
serial2-oe {
pinctrl_serial2_oe: serial2-1 {
st,pins {
- output-enable = <&PIO11 3 ALT2 OUT>;
+ output-enable = <&pio11 3 ALT2 OUT>;
};
};
};
@@ -312,8 +312,8 @@
i2c0 {
pinctrl_i2c0_default: i2c0-default {
st,pins {
- sda = <&PIO9 3 ALT1 BIDIR>;
- scl = <&PIO9 2 ALT1 BIDIR>;
+ sda = <&pio9 3 ALT1 BIDIR>;
+ scl = <&pio9 2 ALT1 BIDIR>;
};
};
};
@@ -321,8 +321,8 @@
i2c1 {
pinctrl_i2c1_default: i2c1-default {
st,pins {
- sda = <&PIO12 1 ALT1 BIDIR>;
- scl = <&PIO12 0 ALT1 BIDIR>;
+ sda = <&pio12 1 ALT1 BIDIR>;
+ scl = <&pio12 0 ALT1 BIDIR>;
};
};
};
@@ -330,12 +330,12 @@
fsm {
pinctrl_fsm: fsm {
st,pins {
- spi-fsm-clk = <&PIO12 2 ALT1 OUT>;
- spi-fsm-cs = <&PIO12 3 ALT1 OUT>;
- spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
- spi-fsm-miso = <&PIO12 5 ALT1 IN>;
- spi-fsm-hol = <&PIO12 6 ALT1 OUT>;
- spi-fsm-wp = <&PIO12 7 ALT1 OUT>;
+ spi-fsm-clk = <&pio12 2 ALT1 OUT>;
+ spi-fsm-cs = <&pio12 3 ALT1 OUT>;
+ spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
+ spi-fsm-miso = <&pio12 5 ALT1 IN>;
+ spi-fsm-hol = <&pio12 6 ALT1 OUT>;
+ spi-fsm-wp = <&pio12 7 ALT1 OUT>;
};
};
};
@@ -352,7 +352,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x6000>;
- PIO13: gpio@fe820000 {
+ pio13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -360,7 +360,7 @@
reg = <0 0x100>;
st,bank-name = "PIO13";
};
- PIO14: gpio@fe821000 {
+ pio14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -368,7 +368,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
- PIO15: gpio@fe822000 {
+ pio15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -376,7 +376,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
- PIO16: gpio@fe823000 {
+ pio16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -384,7 +384,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
- PIO17: gpio@fe824000 {
+ pio17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -392,7 +392,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
- PIO18: gpio@fe825000 {
+ pio18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -405,8 +405,8 @@
serial2 {
pinctrl_serial2: serial2-0 {
st,pins {
- tx = <&PIO17 4 ALT2 OUT>;
- rx = <&PIO17 5 ALT2 IN>;
+ tx = <&pio17 4 ALT2 OUT>;
+ rx = <&pio17 5 ALT2 IN>;
};
};
};
@@ -414,28 +414,28 @@
gmac0 {
pinctrl_mii0: mii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
};
};
@@ -445,25 +445,64 @@
};
pinctrl_rgmii0: rgmii0 {
st,pins {
- phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
- txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
+ txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
- mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+ mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
- rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
- rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>;
- rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>;
- rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>;
- rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
- rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
+ rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>;
+ rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>;
+ rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>;
+ rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
+ rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
- clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+ clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0: mmc0 {
+ st,pins {
+ mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
+ wp = <&pio15 3 ALT4 IN>;
+ data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
+ data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
+ pwr = <&pio17 1 ALT4 OUT>;
+ cd = <&pio17 2 ALT4 IN>;
+ led = <&pio17 3 ALT4 OUT>;
+ };
+ };
+ };
+ mmc1 {
+ pinctrl_mmc1: mmc1 {
+ st,pins {
+ mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
+ data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
+ data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
+ pwr = <&pio16 2 ALT3 OUT>;
+ nreset = <&pio13 6 ALT3 OUT>;
};
};
};
@@ -480,7 +519,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
- PIO100: gpio@fd6b0000 {
+ pio100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -488,7 +527,7 @@
reg = <0 0x100>;
st,bank-name = "PIO100";
};
- PIO101: gpio@fd6b1000 {
+ pio101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -496,7 +535,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
- PIO102: gpio@fd6b2000 {
+ pio102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -517,7 +556,7 @@
interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
- PIO103: gpio@fd330000 {
+ pio103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -525,7 +564,7 @@
reg = <0 0x100>;
st,bank-name = "PIO103";
};
- PIO104: gpio@fd331000 {
+ pio104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -533,7 +572,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
- PIO105: gpio@fd332000 {
+ pio105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -541,7 +580,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
- PIO106: gpio@fd333000 {
+ pio106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
@@ -550,7 +589,7 @@
st,bank-name = "PIO106";
};
- PIO107: gpio@fd334000 {
+ pio107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 84758d7..1137bdf 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -9,6 +9,8 @@
#include "stih41x.dtsi"
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
+
+#include <dt-bindings/phy/phy-miphy365x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
@@ -236,5 +238,83 @@
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
<&softreset STIH416_KEYSCAN_SOFTRESET>;
};
+
+ temp0 {
+ compatible = "st,stih416-sas-thermal";
+ clock-names = "thermal";
+ clocks = <&clockgen_c_vcc 14>;
+
+ status = "okay";
+ };
+
+ temp1@fdfe8000 {
+ compatible = "st,stih416-mpe-thermal";
+ reg = <0xfdfe8000 0x10>;
+ clocks = <&clockgen_e 3>;
+ clock-names = "thermal";
+ interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+
+ status = "okay";
+ };
+
+ mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+ };
+
+ mmc1: sdhci@fe81f000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81f000 0x1000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 8>;
+ };
+
+ miphy365x_phy: miphy365x@fe382000 {
+ compatible = "st,miphy365x-phy";
+ st,syscfg = <&syscfg_rear>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ phy_port0: port@fe382000 {
+ #phy-cells = <1>;
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+
+ phy_port1: port@fe38a000 {
+ #phy-cells = <1>;
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+ };
+
+ sata0: sata@fe380000 {
+ compatible = "st,sti-ahci";
+ reg = <0xfe380000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+ phys = <&phy_port0 MIPHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ resets = <&powerdown STIH416_SATA0_POWERDOWN>,
+ <&softreset STIH416_SATA0_SOFTRESET>;
+ reset-names = "pwr-dwn", "sw-rst";
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index b3dd6ca..5f91f45 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -35,7 +35,7 @@
fp_led {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO105 7>;
+ gpios = <&pio105 7>;
linux,default-trigger = "heartbeat";
};
};
@@ -55,7 +55,7 @@
phy-mode = "mii";
pinctrl-0 = <&pinctrl_mii0>;
- snps,reset-gpio = <&PIO106 2>;
+ snps,reset-gpio = <&pio106 2>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
@@ -65,7 +65,7 @@
phy-mode = "mii";
st,tx-retime-src = "txclk";
- snps,reset-gpio = <&PIO4 7>;
+ snps,reset-gpio = <&pio4 7>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index d8a8429..487d7d8 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -32,11 +32,11 @@
red {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO4 1>;
+ gpios = <&pio4 1>;
linux,default-trigger = "heartbeat";
};
green {
- gpios = <&PIO4 7>;
+ gpios = <&pio4 7>;
default-state = "off";
};
};
@@ -68,11 +68,15 @@
phy-mode = "rgmii-id";
max-speed = <1000>;
st,tx-retime-src = "clk_125";
- snps,reset-gpio = <&PIO3 0>;
+ snps,reset-gpio = <&pio3 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
pinctrl-0 = <&pinctrl_rgmii1>;
};
+
+ mmc0: sdhci@fe81e000 {
+ bus-width = <8>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi
index df01c12..f797a06 100644
--- a/arch/arm/boot/dts/stih41x-b2020x.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi
@@ -8,6 +8,10 @@
*/
/ {
soc {
+ mmc0: sdhci@fe81e000 {
+ status = "okay";
+ };
+
spifsm: spifsm@fe902000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 2063795..dcc6c75 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -187,7 +187,7 @@
/* ALS and Proximity sensor */
isl29028@44 {
- compatible = "isil,isl29028";
+ compatible = "isl,isl29028";
reg = <0x44>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
index 3fd1b74..de1b453 100644
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -33,6 +33,13 @@
};
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
@@ -42,6 +49,18 @@
&iomuxc {
vf610-cosmic {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index e1f51ca..0429bbd 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -34,6 +34,10 @@
};
};
+&clkc {
+ fclk-enable = <0xf>;
+};
+
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index d86771a..72041f0 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -26,6 +26,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
+#include <linux/dma-mapping.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
@@ -1623,6 +1624,11 @@
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
int ret;
+ struct platform_device_info edma_dev_info = {
+ .name = "edma-dma-engine",
+ .dma_mask = DMA_BIT_MASK(32),
+ .parent = &pdev->dev,
+ };
if (node) {
/* Check if this is a second instance registered */
@@ -1793,6 +1799,9 @@
edma_write_array(j, EDMA_QRAE, i, 0x0);
}
arch_num_cc++;
+
+ edma_dev_info.id = j;
+ platform_device_register_full(&edma_dev_info);
}
return 0;
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index e688741..e6b0007 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -97,6 +97,7 @@
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 8fca6e2..6790f1b 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -158,6 +158,7 @@
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f1dc7fc..3487046 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -235,6 +235,7 @@
CONFIG_SPI_XILINX=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DWAPB=y
@@ -411,6 +412,7 @@
CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
+CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 263ae38..7d2ad30 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -20,7 +20,6 @@
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -57,14 +56,12 @@
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
@@ -83,21 +80,21 @@
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_STMPE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
-CONFIG_I2C_NOMADIK=y
CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_STMPE=y
# CONFIG_HWMON is not set
+CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
@@ -125,12 +122,12 @@
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
+CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_DES=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 16e719c..b3f8667 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -86,7 +86,6 @@
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
@@ -112,6 +111,7 @@
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
@@ -317,7 +317,7 @@
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS4_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index d7a5855..a2956c3 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -1,5 +1,6 @@
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -11,23 +12,17 @@
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_HOTPLUG=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SOCFPGA=y
-CONFIG_MACH_SOCFPGA_CYCLONE5=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
@@ -41,38 +36,30 @@
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_GW=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SRAM=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
-CONFIG_MICREL_PHY=y
-# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
-CONFIG_INPUT_EVDEV=y
CONFIG_DWMAC_SOCFPGA=y
-CONFIG_PPS=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_GARP=y
-CONFIG_IPV6=y
+CONFIG_MICREL_PHY=y
+CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
@@ -81,45 +68,43 @@
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
-# CONFIG_RTC_HCTOSYS is not set
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_HOST=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_FHANDLE=y
+CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
-CONFIG_I2C=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_PM=y
-CONFIG_SUSPEND=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_DWC2_PLATFORM=y
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index a178184..4096372 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -58,8 +58,14 @@
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
+#define PLL1_CTRL (anatop_base + 0x270)
+#define PLL2_CTRL (anatop_base + 0x30)
#define PLL3_CTRL (anatop_base + 0x10)
+#define PLL4_CTRL (anatop_base + 0x70)
+#define PLL5_CTRL (anatop_base + 0xe0)
+#define PLL6_CTRL (anatop_base + 0xa0)
#define PLL7_CTRL (anatop_base + 0x20)
+#define ANA_MISC1 (anatop_base + 0x160)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
@@ -67,25 +73,34 @@
/* sources for multiplexer clocks, this is used multiple times */
static const char *fast_sels[] = { "firc", "fxosc", };
static const char *slow_sels[] = { "sirc_32k", "sxosc", };
-static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", };
+static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
-static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
/* FTM counter clock source, not module clock */
static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
-static struct clk_div_table pll4_main_div_table[] = {
+
+static struct clk_div_table pll4_audio_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 6 },
@@ -120,6 +135,9 @@
clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
+ /* Clock source from external clock via LVDs PAD */
+ clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
@@ -133,31 +151,63 @@
clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
- clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
- clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
- clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
- clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
+ clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
- clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
- clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
- clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
+ clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
+ clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
+ clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+ clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
+ clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
+ clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
+ clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
- clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
- clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
- clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
- clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
- clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
+ clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
- clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
- /* Enet pll: fixed 50Mhz */
- clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
- /* pll6: default 960Mhz */
- clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
- /* pll7: USB1 PLL at 480MHz */
- clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
+ clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
+ clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
+ clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
+ clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
+ clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
+ clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
+
+ clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
+ clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
+ clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
+ clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
+ clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
+ clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
+ clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
+
+ clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
+
+ clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
+ clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
+ clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
+ clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
+
+ clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
+ clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
+ clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
+ clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
+
+ clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
+ clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
+ clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
+ clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
@@ -167,12 +217,12 @@
clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
- clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
- clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
- clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
+ clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
+ clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
+ clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
- clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
- clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+ clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
+ clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
@@ -191,8 +241,8 @@
clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
- clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
+ clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
+ clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 559c69a..7d11979 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -76,7 +76,7 @@
u32 n, byte_enables, data;
if (!is_pci_memory(addr)) {
- __raw_writeb(value, addr);
+ __raw_writeb(value, p);
return;
}
@@ -141,7 +141,7 @@
u32 n, byte_enables, data;
if (!is_pci_memory(addr))
- return __raw_readb(addr);
+ return __raw_readb(p);
n = addr % 4;
byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9116ca4..9bda46f 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -144,6 +144,7 @@
device_initcall(cpu8815_mmcsd_init);
static const char * cpu8815_board_compat[] = {
+ "st,nomadik-nhk-15",
"calaosystems,usb-s8815",
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index d22c30d..8c58b71 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -917,6 +917,10 @@
static int __init omap_device_late_init(void)
{
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+
+ WARN(!of_have_populated_dt(),
+ "legacy booting deprecated, please update to boot with .dts\n");
+
return 0;
}
omap_late_initcall_sync(omap_device_late_init);
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index cec9d6c..2156f69 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/ti_wilink_st.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/pinctrl-single.h>
@@ -139,8 +140,38 @@
omap_ads7846_init(1, 57, 0, NULL);
}
-static void __init omap3_igep0020_legacy_init(void)
+struct ti_st_plat_data wilink_pdata = {
+ .nshutdown_gpio = 137,
+ .dev_name = "/dev/ttyO1",
+ .flow_cntrl = 1,
+ .baud_rate = 300000,
+};
+
+static struct platform_device wl18xx_device = {
+ .name = "kim",
+ .id = -1,
+ .dev = {
+ .platform_data = &wilink_pdata,
+ }
+};
+
+static struct platform_device btwilink_device = {
+ .name = "btwilink",
+ .id = -1,
+};
+
+static void __init omap3_igep0020_rev_f_legacy_init(void)
{
+ legacy_init_wl12xx(0, 0, 177);
+ platform_device_register(&wl18xx_device);
+ platform_device_register(&btwilink_device);
+}
+
+static void __init omap3_igep0030_rev_g_legacy_init(void)
+{
+ legacy_init_wl12xx(0, 0, 136);
+ platform_device_register(&wl18xx_device);
+ platform_device_register(&btwilink_device);
}
static void __init omap3_evm_legacy_init(void)
@@ -390,7 +421,8 @@
{ "nokia,omap3-n900", nokia_n900_legacy_init, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
- { "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
+ { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
+ { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
index bbf9df3..d28fe29 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -39,6 +39,11 @@
#define DMEMC_SIZE 0x00100000
/*
+ * Reserved space for low level debug virtual addresses within
+ * 0xf6200000..0xf6201000
+ */
+
+/*
* Internal Memory Controller (PXA27x and later)
*/
#define IMEMC_PHYS 0x58000000
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 9db2029..565925f 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -1,6 +1,19 @@
menu "RealView platform type"
depends on ARCH_REALVIEW
+config REALVIEW_DT
+ bool "Support RealView(R) Device Tree based boot"
+ select ARM_GIC
+ select MFD_SYSCON
+ select POWER_RESET
+ select POWER_RESET_VERSATILE
+ select POWER_SUPPLY
+ select SOC_REALVIEW
+ select USE_OF
+ help
+ Include support for booting the ARM(R) RealView(R) evaluation
+ boards using a device tree machine description.
+
config MACH_REALVIEW_EB
bool "Support RealView(R) Emulation Baseboard"
select ARM_GIC
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 541fa4c..e07fdf7 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -3,6 +3,7 @@
#
obj-y := core.o
+obj-$(CONFIG_REALVIEW_DT) += realview-dt.o
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o
obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c
new file mode 100644
index 0000000..cc28b89
--- /dev/null
+++ b/arch/arm/mach-realview/realview-dt.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "core.h"
+
+static const char *realview_dt_platform_compat[] __initconst = {
+ "arm,realview-eb",
+ "arm,realview-pb1176",
+ "arm,realview-pb11mp",
+ "arm,realview-pba8",
+ "arm,realview-pbx",
+ NULL,
+};
+
+DT_MACHINE_START(REALVIEW_DT, "ARM RealView Machine (Device Tree Support)")
+#ifdef CONFIG_ZONE_DMA
+ .dma_zone_size = SZ_256M,
+#endif
+ .dt_compat = realview_dt_platform_compat,
+ .l2c_aux_val = 0x0,
+ .l2c_aux_mask = ~0x0,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a6503d8..3b68370 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
@@ -48,7 +44,6 @@
clk_put(parent);
clk_put(mp);
- r8a73a4_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index b222f68..66f6781 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e709835..0e912af 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -12,11 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <linux/clk.h>
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index 79c4784..d649ade 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/of_platform.h>
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 1cf2c75..f27b5a8 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/mfd/tmio.h>
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index 46aa540..451ba62 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -13,93 +13,17 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
-#include <linux/platform_data/rcar-du.h>
#include <asm/mach/arch.h>
-#include "clock.h"
#include "common.h"
-#include "irqs.h"
#include "r8a7791.h"
#include "rcar-gen2.h"
-/* DU */
-static struct rcar_du_encoder_data koelsch_du_encoders[] = {
- {
- .type = RCAR_DU_ENCODER_NONE,
- .output = RCAR_DU_OUTPUT_LVDS0,
- .connector.lvds.panel = {
- .width_mm = 210,
- .height_mm = 158,
- .mode = {
- .pixelclock = 65000000,
- .hactive = 1024,
- .hfront_porch = 20,
- .hback_porch = 160,
- .hsync_len = 136,
- .vactive = 768,
- .vfront_porch = 3,
- .vback_porch = 29,
- .vsync_len = 6,
- },
- },
- },
-};
-
-static struct rcar_du_platform_data koelsch_du_pdata = {
- .encoders = koelsch_du_encoders,
- .num_encoders = ARRAY_SIZE(koelsch_du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
- DEFINE_RES_MEM(0xfeb00000, 0x40000),
- DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
- DEFINE_RES_IRQ(gic_spi(256)),
- DEFINE_RES_IRQ(gic_spi(268)),
-};
-
-static void __init koelsch_add_du_device(void)
-{
- struct platform_device_info info = {
- .name = "rcar-du-r8a7791",
- .id = -1,
- .res = du_resources,
- .num_res = ARRAY_SIZE(du_resources),
- .data = &koelsch_du_pdata,
- .size_data = sizeof(koelsch_du_pdata),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- platform_device_register_full(&info);
-}
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
- { "du0", "du.0", "rcar-du-r8a7791" },
- { "du1", "du.1", "rcar-du-r8a7791" },
- { "lvds0", "lvds.0", "rcar-du-r8a7791" },
-};
-
-static void __init koelsch_add_standard_devices(void)
-{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- koelsch_add_du_device();
-}
-
static const char * const koelsch_boards_compat_dt[] __initconst = {
"renesas,koelsch",
"renesas,koelsch-reference",
@@ -110,7 +34,6 @@
.smp = smp_ops(r8a7791_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
- .init_machine = koelsch_add_standard_devices,
.init_late = shmobile_init_late,
.reserve = rcar_gen2_reserve,
.dt_compat = koelsch_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 7111b5c..3a6a276 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index d9cdf9a..f2ef759b 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 77e36fa..7c9b63b 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index bc4b483..fa06bdb 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -12,100 +12,17 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/of_platform.h>
-#include <linux/platform_data/rcar-du.h>
#include <asm/mach/arch.h>
-#include "clock.h"
#include "common.h"
-#include "irqs.h"
#include "r8a7790.h"
#include "rcar-gen2.h"
-/* DU */
-static struct rcar_du_encoder_data lager_du_encoders[] = {
- {
- .type = RCAR_DU_ENCODER_VGA,
- .output = RCAR_DU_OUTPUT_DPAD0,
- }, {
- .type = RCAR_DU_ENCODER_NONE,
- .output = RCAR_DU_OUTPUT_LVDS1,
- .connector.lvds.panel = {
- .width_mm = 210,
- .height_mm = 158,
- .mode = {
- .pixelclock = 65000000,
- .hactive = 1024,
- .hfront_porch = 20,
- .hback_porch = 160,
- .hsync_len = 136,
- .vactive = 768,
- .vfront_porch = 3,
- .vback_porch = 29,
- .vsync_len = 6,
- },
- },
- },
-};
-
-static struct rcar_du_platform_data lager_du_pdata = {
- .encoders = lager_du_encoders,
- .num_encoders = ARRAY_SIZE(lager_du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
- DEFINE_RES_MEM(0xfeb00000, 0x70000),
- DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
- DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
- DEFINE_RES_IRQ(gic_spi(256)),
- DEFINE_RES_IRQ(gic_spi(268)),
- DEFINE_RES_IRQ(gic_spi(269)),
-};
-
-static void __init lager_add_du_device(void)
-{
- struct platform_device_info info = {
- .name = "rcar-du-r8a7790",
- .id = -1,
- .res = du_resources,
- .num_res = ARRAY_SIZE(du_resources),
- .data = &lager_du_pdata,
- .size_data = sizeof(lager_du_pdata),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- platform_device_register_full(&info);
-}
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
- { "du0", "du.0", "rcar-du-r8a7790" },
- { "du1", "du.1", "rcar-du-r8a7790" },
- { "du2", "du.2", "rcar-du-r8a7790" },
- { "lvds0", "lvds.0", "rcar-du-r8a7790" },
- { "lvds1", "lvds.1", "rcar-du-r8a7790" },
-};
-
-static void __init lager_add_standard_devices(void)
-{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- lager_add_du_device();
-}
-
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
"renesas,lager-reference",
@@ -116,7 +33,6 @@
.smp = smp_ops(r8a7790_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
- .init_machine = lager_add_standard_devices,
.init_late = shmobile_init_late,
.reserve = rcar_gen2_reserve,
.dt_compat = lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 571327b..b47262a 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index ca5d34b..ed10870 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -16,10 +16,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 38d9cdd..f0757bb 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk/shmobile.h>
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index ce33d78..994dc7d 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index c2330ea1..1cf44dc 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 0794f04..969e85d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 67980a0..e8510c3 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -17,10 +17,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index c51f9db..fa8ab2c 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/bitops.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 126ddaf..c395ff1 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index 453b231..82143ca 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7071676..3bc92f4 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 02a6f45..6b4c1f3 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 806f940..1f81ad7 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -14,10 +14,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
index f2e79f2..e329ccb 100644
--- a/arch/arm/mach-shmobile/console.c
+++ b/arch/arm/mach-shmobile/console.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index f45dde7..69df8bf 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -12,11 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
#include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index e2af00b..1ccf49c 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 44457a9..9e36180 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h
index 5fafd6f..70dcd84 100644
--- a/arch/arm/mach-shmobile/r8a73a4.h
+++ b/arch/arm/mach-shmobile/r8a73a4.h
@@ -11,7 +11,6 @@
};
void r8a73a4_add_standard_devices(void);
-void r8a73a4_add_dt_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
index f369b4b..ca7805a 100644
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ASM_R8A7740_H__
diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
index f4076a5..9086dfc 100644
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ b/arch/arm/mach-shmobile/r8a7778.h
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ASM_R8A7778_H__
#define __ASM_R8A7778_H__
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index b06a9e8..aad97be 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 4122104..1711747 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 53f40b7..c276822 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
#include <linux/kernel.h>
@@ -180,18 +176,13 @@
DEFINE_RES_IRQ(gic_spi(120)),
};
-#define r8a7790_register_cmt(idx) \
+#define r8a73a4_register_cmt(idx) \
platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \
idx, cmt##idx##_resources, \
ARRAY_SIZE(cmt##idx##_resources), \
&cmt##idx##_platform_data, \
sizeof(struct sh_timer_config))
-void __init r8a73a4_add_dt_devices(void)
-{
- r8a7790_register_cmt(1);
-}
-
/* DMA */
static const struct sh_dmae_slave_config dma_slaves[] = {
{
@@ -282,7 +273,7 @@
void __init r8a73a4_add_standard_devices(void)
{
- r8a73a4_add_dt_devices();
+ r8a73a4_register_cmt(1);
r8a73a4_register_scif(0);
r8a73a4_register_scif(1);
r8a73a4_register_scif(2);
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8894e1b..fe15dd2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 85fe016..7c7223d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
@@ -292,8 +288,6 @@
l2x0_init(base, 0x00400000, 0xc20f0fff);
}
#endif
-
- r8a7778_register_tmu(0);
}
/* HPB-DMA */
@@ -501,6 +495,7 @@
void __init r8a7778_add_standard_devices(void)
{
r8a7778_add_dt_devices();
+ r8a7778_register_tmu(0);
r8a7778_register_scif(0);
r8a7778_register_scif(1);
r8a7778_register_scif(2);
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 136078a..d08e75c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 877fdeb..ec7d97d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 35d7863..d930925f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 42d5b43..a669377 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk/shmobile.h>
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index d646c8d..e81c385 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index b7bd8e5..1c8172d 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index 9782862..146b8de 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -22,11 +22,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
#include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 6ff1df1..baff3b5 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 3100e35..3f761f8 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 22d8f87..c16dbfe 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 87c6be1..1081b76 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -12,11 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <linux/platform_device.h>
#include <linux/clocksource.h>
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 878e9ec..8825bc9 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -42,4 +42,14 @@
and other digital audio/video applications using Flattened Device
Trees.
+config SOC_STIH407
+ bool "STiH407 STMicroelectronics Consumer Electronics family"
+ default y
+ select STIH407_RESET
+ help
+ This enables support for STMicroelectronics Digital Consumer
+ Electronics family StiH407 parts, targetted at set-top-box
+ and other digital audio/video applications using Flattened Device
+ Trees.
+
endif
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 4ce602c..dd301be 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -35,6 +35,9 @@
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_XGENE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_XGENE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_KSM=y
@@ -52,6 +55,7 @@
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
+CONFIG_BPF_JIT=y
# CONFIG_WIRELESS is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
@@ -65,16 +69,17 @@
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_XGENE=y
-CONFIG_PHY_XGENE=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_VIRTIO_NET=y
+CONFIG_NET_XGENE=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
-CONFIG_NET_XGENE=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
@@ -87,6 +92,11 @@
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
+# CONFIG_HMC_DRV is not set
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_XGENE=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -97,13 +107,25 @@
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_XGENE=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index da1f06b..9dfdac4 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -792,3 +792,5 @@
__SYSCALL(__NR_getrandom, sys_getrandom)
#define __NR_memfd_create 385
__SYSCALL(__NR_memfd_create, sys_memfd_create)
+#define __NR_bpf 386
+__SYSCALL(__NR_bpf, sys_bpf)
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 866c1c8..663da77 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -528,7 +528,7 @@
if (WARN_ON_ONCE(!index))
return -EINVAL;
- if (state->type == PSCI_POWER_STATE_TYPE_STANDBY)
+ if (state[index - 1].type == PSCI_POWER_STATE_TYPE_STANDBY)
ret = psci_ops.cpu_suspend(state[index - 1], 0);
else
ret = __cpu_suspend(index, psci_suspend_finisher);
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 4ef7a54..75e75d7 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
-#define NR_syscalls 354
+#define NR_syscalls 355
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h
index b419c6b..2c1bec9 100644
--- a/arch/m68k/include/uapi/asm/unistd.h
+++ b/arch/m68k/include/uapi/asm/unistd.h
@@ -359,5 +359,6 @@
#define __NR_renameat2 351
#define __NR_getrandom 352
#define __NR_memfd_create 353
+#define __NR_bpf 354
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 05b46c2..2ca219e 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -374,4 +374,5 @@
.long sys_renameat2
.long sys_getrandom
.long sys_memfd_create
+ .long sys_bpf
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 23cb948..5807647 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -93,6 +93,15 @@
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
+#
+# pass -msoft-float to GAS if it supports it. However on newer binutils
+# (specifically newer than 2.24.51.20140728) we then also need to explicitly
+# set ".set hardfloat" in all files which manipulate floating point registers.
+#
+ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
+ cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
+endif
+
cflags-y += -ffreestanding
#
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 7417340..2bc4aa9 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -809,6 +809,7 @@
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
@@ -823,6 +824,7 @@
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h
index e38c281..cdac7b3 100644
--- a/arch/mips/include/asm/asmmacro-32.h
+++ b/arch/mips/include/asm/asmmacro-32.h
@@ -13,6 +13,8 @@
#include <asm/mipsregs.h>
.macro fpu_save_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
swc1 $f0, THREAD_FPR0_LS64(\thread)
swc1 $f1, THREAD_FPR1_LS64(\thread)
@@ -47,9 +49,12 @@
swc1 $f30, THREAD_FPR30_LS64(\thread)
swc1 $f31, THREAD_FPR31_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_restore_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
lwc1 $f0, THREAD_FPR0_LS64(\thread)
lwc1 $f1, THREAD_FPR1_LS64(\thread)
@@ -84,6 +89,7 @@
lwc1 $f30, THREAD_FPR30_LS64(\thread)
lwc1 $f31, THREAD_FPR31_LS64(\thread)
ctc1 \tmp, fcr31
+ .set pop
.endm
.macro cpu_save_nonscratch thread
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index cd9a98b..6caf876 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -57,6 +57,8 @@
#endif /* CONFIG_CPU_MIPSR2 */
.macro fpu_save_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
sdc1 $f0, THREAD_FPR0_LS64(\thread)
sdc1 $f2, THREAD_FPR2_LS64(\thread)
@@ -75,11 +77,13 @@
sdc1 $f28, THREAD_FPR28_LS64(\thread)
sdc1 $f30, THREAD_FPR30_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_save_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
sdc1 $f1, THREAD_FPR1_LS64(\thread)
sdc1 $f3, THREAD_FPR3_LS64(\thread)
sdc1 $f5, THREAD_FPR5_LS64(\thread)
@@ -110,6 +114,8 @@
.endm
.macro fpu_restore_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
ldc1 $f0, THREAD_FPR0_LS64(\thread)
ldc1 $f2, THREAD_FPR2_LS64(\thread)
@@ -133,6 +139,7 @@
.macro fpu_restore_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
ldc1 $f1, THREAD_FPR1_LS64(\thread)
ldc1 $f3, THREAD_FPR3_LS64(\thread)
ldc1 $f5, THREAD_FPR5_LS64(\thread)
@@ -277,6 +284,7 @@
.macro cfcmsa rd, cs
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word CFC_MSA_INSN | (\cs << 11)
move \rd, $1
@@ -286,6 +294,7 @@
.macro ctcmsa cd, rs
.set push
.set noat
+ SET_HARDFLOAT
move $1, \rs
.word CTC_MSA_INSN | (\cd << 6)
.set pop
@@ -294,6 +303,7 @@
.macro ld_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word LDD_MSA_INSN | (\wd << 6)
.set pop
@@ -302,6 +312,7 @@
.macro st_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word STD_MSA_INSN | (\wd << 6)
.set pop
@@ -310,6 +321,7 @@
.macro copy_u_w rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
@@ -320,6 +332,7 @@
.macro copy_u_d rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
@@ -330,6 +343,7 @@
.macro insert_w wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
@@ -339,6 +353,7 @@
.macro insert_d wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
@@ -381,6 +396,7 @@
st_d 31, THREAD_FPR31, \thread
.set push
.set noat
+ SET_HARDFLOAT
cfcmsa $1, MSA_CSR
sw $1, THREAD_MSA_CSR(\thread)
.set pop
@@ -389,6 +405,7 @@
.macro msa_restore_all thread
.set push
.set noat
+ SET_HARDFLOAT
lw $1, THREAD_MSA_CSR(\thread)
ctcmsa MSA_CSR, $1
.set pop
@@ -441,6 +458,7 @@
.macro msa_init_all_upper
.set push
.set noat
+ SET_HARDFLOAT
not $1, zero
msa_init_upper 0
.set pop
diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h
index 429481f..f184ba0 100644
--- a/arch/mips/include/asm/fpregdef.h
+++ b/arch/mips/include/asm/fpregdef.h
@@ -14,6 +14,20 @@
#include <asm/sgidefs.h>
+/*
+ * starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing
+ * hardfloat and softfloat object files. The kernel build uses soft-float by
+ * default, so we also need to pass -msoft-float along to GAS if it supports it.
+ * But this in turn causes assembler errors in files which access hardfloat
+ * registers. We detect if GAS supports "-msoft-float" in the Makefile and
+ * explicitly put ".set hardfloat" where floating point registers are touched.
+ */
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define SET_HARDFLOAT .set hardfloat
+#else
+#define SET_HARDFLOAT
+#endif
+
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 4d0aeda..dd56241 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -145,8 +145,8 @@
if (is_msa_enabled()) {
if (save) {
save_msa(current);
- asm volatile("cfc1 %0, $31"
- : "=r"(current->thread.fpu.fcr31));
+ current->thread.fpu.fcr31 =
+ read_32bit_cp1_register(CP1_STATUS);
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index cf3b580..b46cd22 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1324,7 +1324,7 @@
/*
* Macros to access the floating point coprocessor control registers
*/
-#define read_32bit_cp1_register(source) \
+#define _read_32bit_cp1_register(source, gas_hardfloat) \
({ \
int __res; \
\
@@ -1334,12 +1334,21 @@
" # gas fails to assemble cfc1 for some archs, \n" \
" # like Octeon. \n" \
" .set mips1 \n" \
+ " "STR(gas_hardfloat)" \n" \
" cfc1 %0,"STR(source)" \n" \
" .set pop \n" \
: "=r" (__res)); \
__res; \
})
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, .set hardfloat)
+#else
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, )
+#endif
+
#ifdef HAVE_AS_DSP
#define rddsp(mask) \
({ \
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index fdb4923..9dc5856 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -375,16 +375,17 @@
#define __NR_seccomp (__NR_Linux + 352)
#define __NR_getrandom (__NR_Linux + 353)
#define __NR_memfd_create (__NR_Linux + 354)
+#define __NR_bpf (__NR_Linux + 355)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 354
+#define __NR_Linux_syscalls 355
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 354
+#define __NR_O32_Linux_syscalls 355
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -707,16 +708,17 @@
#define __NR_seccomp (__NR_Linux + 312)
#define __NR_getrandom (__NR_Linux + 313)
#define __NR_memfd_create (__NR_Linux + 314)
+#define __NR_bpf (__NR_Linux + 315)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 314
+#define __NR_Linux_syscalls 315
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 314
+#define __NR_64_Linux_syscalls 315
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -1043,15 +1045,16 @@
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
+#define __NR_memfd_create (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 318
+#define __NR_Linux_syscalls 319
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 318
+#define __NR_N32_Linux_syscalls 319
#endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 7b2df22..4d7d99d 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -144,7 +144,7 @@
case mm_bc1t_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
@@ -562,11 +562,7 @@
case cop1_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index ac35e12..a5e26dd 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -358,6 +358,7 @@
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
+ SET_HARDFLOAT
cfc1 a1, fcr31
li a2, ~(0x3f << 12)
and a2, a1
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
index f31063d..5ce3b74 100644
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -28,6 +28,8 @@
.set mips1
/* Save floating point context */
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1,fcr31
EX(swc1 $f0,(SC_FPREGS+0)(a0))
@@ -65,6 +67,7 @@
EX(sw t1,(SC_FPC_CSR)(a0))
cfc1 t0,$0 # implementation/version
jr ra
+ .set pop
.set nomacro
EX(sw t0,(SC_FPC_EIR)(a0))
.set macro
@@ -80,6 +83,8 @@
* stack frame which might have been changed by the user.
*/
LEAF(_restore_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0,(SC_FPC_CSR)(a0))
EX(lwc1 $f0,(SC_FPREGS+0)(a0))
@@ -116,6 +121,7 @@
EX(lwc1 $f31,(SC_FPREGS+248)(a0))
jr ra
ctc1 t0,fcr31
+ .set pop
END(_restore_fp_context)
.set reorder
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 20b7b04..435ea65 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -120,6 +120,9 @@
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
@@ -165,3 +168,5 @@
mtc1 t0, $f31
jr ra
END(_init_fpu)
+
+ .set pop
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 8352523..6c160c6 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -19,8 +19,12 @@
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
.macro EX insn, reg, src
.set push
+ SET_HARDFLOAT
.set nomacro
.ex\@: \insn \reg, \src
.set pop
@@ -33,12 +37,17 @@
.set arch=r4000
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
+ .set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip storing odd if FR=0
@@ -64,6 +73,8 @@
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
/* Store the 16 even double precision registers */
EX sdc1 $f0, SC_FPREGS+0(a0)
EX sdc1 $f2, SC_FPREGS+16(a0)
@@ -84,11 +95,14 @@
EX sw t1, SC_FPC_CSR(a0)
jr ra
li v0, 0 # success
+ .set pop
END(_save_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
/* Save 32-bit process floating point context */
LEAF(_save_fp_context32)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
mfc0 t0, CP0_STATUS
@@ -134,6 +148,7 @@
EX sw t1, SC32_FPC_CSR(a0)
cfc1 t0, $0 # implementation/version
EX sw t0, SC32_FPC_EIR(a0)
+ .set pop
jr ra
li v0, 0 # success
@@ -150,8 +165,10 @@
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip loading odd if FR=0
@@ -175,6 +192,8 @@
EX ldc1 $f31, SC_FPREGS+248(a0)
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
EX ldc1 $f0, SC_FPREGS+0(a0)
EX ldc1 $f2, SC_FPREGS+16(a0)
EX ldc1 $f4, SC_FPREGS+32(a0)
@@ -192,6 +211,7 @@
EX ldc1 $f28, SC_FPREGS+224(a0)
EX ldc1 $f30, SC_FPREGS+240(a0)
ctc1 t1, fcr31
+ .set pop
jr ra
li v0, 0 # success
END(_restore_fp_context)
@@ -199,6 +219,8 @@
#ifdef CONFIG_MIPS32_COMPAT
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
+ .set push
+ SET_HARDFLOAT
EX lw t1, SC32_FPC_CSR(a0)
mfc0 t0, CP0_STATUS
@@ -242,6 +264,7 @@
ctc1 t1, fcr31
jr ra
li v0, 0 # success
+ .set pop
END(_restore_fp_context32)
#endif
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 4c4ec18..64591e6 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -22,6 +22,9 @@
#include <asm/asmmacro.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
/*
* Offset to the current process status flags, the first 32 bytes of the
* stack are not used.
@@ -65,8 +68,12 @@
bgtz a3, 1f
/* Save 128b MSA vector context + scalar FP control & status. */
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
msa_save_all a0
+ .set pop /* SET_HARDFLOAT */
+
sw t1, THREAD_FCR31(a0)
b 2f
@@ -161,6 +168,9 @@
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
@@ -232,7 +242,8 @@
#ifdef CONFIG_CPU_MIPS32_R2
.set push
- .set mips64r2
+ .set mips32r2
+ .set fp=64
sll t0, t0, 5 # is Status.FR set?
bgez t0, 1f # no: skip setting upper 32b
@@ -291,3 +302,5 @@
#endif
jr ra
END(_init_fpu)
+
+ .set pop /* SET_HARDFLOAT */
diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S
index da0fbe4..4707738 100644
--- a/arch/mips/kernel/r6000_fpu.S
+++ b/arch/mips/kernel/r6000_fpu.S
@@ -18,6 +18,9 @@
.set noreorder
.set mips2
+ .set push
+ SET_HARDFLOAT
+
/* Save floating point context */
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
@@ -85,3 +88,5 @@
1: jr ra
nop
END(_restore_fp_context)
+
+ .set pop /* SET_HARDFLOAT */
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 744cd10..00cad10 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -579,3 +579,4 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 002b1bc..5251565 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -434,4 +434,5 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 5315 */
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index ca6cbbe..77e7439 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -427,4 +427,5 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 9e10d11..6f8db9f 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -564,4 +564,5 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
.size sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index b3b8f0d..d21ec57 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -683,7 +683,8 @@
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
/* Tell bootmem about cma reserved memblock section */
for_each_memblock(reserved, reg)
- reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+ if (reg->size != 0)
+ reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
}
static void __init resource_init(void)
diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c
index 91615c2..1ef365a 100644
--- a/arch/mips/lib/r3k_dump_tlb.c
+++ b/arch/mips/lib/r3k_dump_tlb.c
@@ -34,7 +34,7 @@
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
- if ((entryhi & 0xffffe000) != 0x80000000
+ if ((entryhi & 0xfffff000) != 0x80000000
&& (entryhi & 0xfc0) == asid) {
/*
* Only print entries in use
@@ -43,7 +43,7 @@
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
- (entryhi & 0xffffe000),
+ (entryhi & 0xfffff000),
entryhi & 0xfc0,
entrylo0 & PAGE_MASK,
(entrylo0 & (1 << 11)) ? 1 : 0,
diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S
index f3af699..7d12c0d 100644
--- a/arch/mips/lib/strnlen_user.S
+++ b/arch/mips/lib/strnlen_user.S
@@ -40,9 +40,11 @@
.else
EX(lbe, t0, (v0), .Lfault\@)
.endif
- PTR_ADDIU v0, 1
+ .set noreorder
bnez t0, 1b
-1: PTR_SUBU v0, a0
+1: PTR_ADDIU v0, 1
+ .set reorder
+ PTR_SUBU v0, a0
jr ra
END(__strnlen_\func\()_asm)
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 51a0fde..cac529a 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -584,11 +584,7 @@
if (insn.i_format.rs == bc_op) {
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..f7ac3ed 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@
msg.data = 0xc00 | msixvec;
ret = irq_set_msi_desc(xirq, desc);
- if (ret < 0) {
- destroy_irq(xirq);
+ if (ret < 0)
return ret;
- }
write_msi_msg(xirq, &msg);
return 0;
diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
index a677456..493e72f 100644
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -70,39 +70,39 @@
#define CPU_UNKNOWN (~((u32)0))
/* Utility macros */
-#define SKIP_TO_NEXT_CPU(reg_entry) \
-({ \
- while (reg_entry->reg_id != REG_ID("CPUEND")) \
- reg_entry++; \
- reg_entry++; \
+#define SKIP_TO_NEXT_CPU(reg_entry) \
+({ \
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) \
+ reg_entry++; \
+ reg_entry++; \
})
/* Kernel Dump section info */
struct fadump_section {
- u32 request_flag;
- u16 source_data_type;
- u16 error_flags;
- u64 source_address;
- u64 source_len;
- u64 bytes_dumped;
- u64 destination_address;
+ __be32 request_flag;
+ __be16 source_data_type;
+ __be16 error_flags;
+ __be64 source_address;
+ __be64 source_len;
+ __be64 bytes_dumped;
+ __be64 destination_address;
};
/* ibm,configure-kernel-dump header. */
struct fadump_section_header {
- u32 dump_format_version;
- u16 dump_num_sections;
- u16 dump_status_flag;
- u32 offset_first_dump_section;
+ __be32 dump_format_version;
+ __be16 dump_num_sections;
+ __be16 dump_status_flag;
+ __be32 offset_first_dump_section;
/* Fields for disk dump option. */
- u32 dd_block_size;
- u64 dd_block_offset;
- u64 dd_num_blocks;
- u32 dd_offset_disk_path;
+ __be32 dd_block_size;
+ __be64 dd_block_offset;
+ __be64 dd_num_blocks;
+ __be32 dd_offset_disk_path;
/* Maximum time allowed to prevent an automatic dump-reboot. */
- u32 max_time_auto;
+ __be32 max_time_auto;
};
/*
@@ -174,15 +174,15 @@
/* Register save area header. */
struct fadump_reg_save_area_header {
- u64 magic_number;
- u32 version;
- u32 num_cpu_offset;
+ __be64 magic_number;
+ __be32 version;
+ __be32 num_cpu_offset;
};
/* Register entry. */
struct fadump_reg_entry {
- u64 reg_id;
- u64 reg_value;
+ __be64 reg_id;
+ __be64 reg_value;
};
/* fadump crash info structure */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 5bbd1bc..0905c8d 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -659,7 +659,13 @@
3:
#endif
bl save_nvgprs
+ /*
+ * Use a non volatile GPR to save and restore our thread_info flags
+ * across the call to restore_interrupts.
+ */
+ mr r30,r4
bl restore_interrupts
+ mr r4,r30
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_notify_resume
b ret_from_except
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 742694c..26d091a 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -58,7 +58,7 @@
const __be32 *sections;
int i, num_sections;
int size;
- const int *token;
+ const __be32 *token;
if (depth != 1 || strcmp(uname, "rtas") != 0)
return 0;
@@ -72,7 +72,7 @@
return 1;
fw_dump.fadump_supported = 1;
- fw_dump.ibm_configure_kernel_dump = *token;
+ fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token);
/*
* The 'ibm,kernel-dump' rtas node is present only if there is
@@ -147,11 +147,11 @@
memset(fdm, 0, sizeof(struct fadump_mem_struct));
addr = addr & PAGE_MASK;
- fdm->header.dump_format_version = 0x00000001;
- fdm->header.dump_num_sections = 3;
+ fdm->header.dump_format_version = cpu_to_be32(0x00000001);
+ fdm->header.dump_num_sections = cpu_to_be16(3);
fdm->header.dump_status_flag = 0;
fdm->header.offset_first_dump_section =
- (u32)offsetof(struct fadump_mem_struct, cpu_state_data);
+ cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data));
/*
* Fields for disk dump option.
@@ -167,27 +167,27 @@
/* Kernel dump sections */
/* cpu state data section. */
- fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG;
- fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA;
+ fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA);
fdm->cpu_state_data.source_address = 0;
- fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size;
- fdm->cpu_state_data.destination_address = addr;
+ fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size);
+ fdm->cpu_state_data.destination_address = cpu_to_be64(addr);
addr += fw_dump.cpu_state_data_size;
/* hpte region section */
- fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION;
+ fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION);
fdm->hpte_region.source_address = 0;
- fdm->hpte_region.source_len = fw_dump.hpte_region_size;
- fdm->hpte_region.destination_address = addr;
+ fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size);
+ fdm->hpte_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.hpte_region_size;
/* RMA region section */
- fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION;
- fdm->rmr_region.source_address = RMA_START;
- fdm->rmr_region.source_len = fw_dump.boot_memory_size;
- fdm->rmr_region.destination_address = addr;
+ fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION);
+ fdm->rmr_region.source_address = cpu_to_be64(RMA_START);
+ fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size);
+ fdm->rmr_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.boot_memory_size;
return addr;
@@ -272,7 +272,7 @@
* first kernel.
*/
if (fdm_active)
- fw_dump.boot_memory_size = fdm_active->rmr_region.source_len;
+ fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
else
fw_dump.boot_memory_size = fadump_calculate_reserve_size();
@@ -314,8 +314,8 @@
(unsigned long)(base >> 20));
fw_dump.fadumphdr_addr =
- fdm_active->rmr_region.destination_address +
- fdm_active->rmr_region.source_len;
+ be64_to_cpu(fdm_active->rmr_region.destination_address) +
+ be64_to_cpu(fdm_active->rmr_region.source_len);
pr_debug("fadumphdr_addr = %p\n",
(void *) fw_dump.fadumphdr_addr);
} else {
@@ -472,9 +472,9 @@
{
memset(regs, 0, sizeof(struct pt_regs));
- while (reg_entry->reg_id != REG_ID("CPUEND")) {
- fadump_set_regval(regs, reg_entry->reg_id,
- reg_entry->reg_value);
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) {
+ fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id),
+ be64_to_cpu(reg_entry->reg_value));
reg_entry++;
}
reg_entry++;
@@ -603,20 +603,20 @@
if (!fdm->cpu_state_data.bytes_dumped)
return -EINVAL;
- addr = fdm->cpu_state_data.destination_address;
+ addr = be64_to_cpu(fdm->cpu_state_data.destination_address);
vaddr = __va(addr);
reg_header = vaddr;
- if (reg_header->magic_number != REGSAVE_AREA_MAGIC) {
+ if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) {
printk(KERN_ERR "Unable to read register save area.\n");
return -ENOENT;
}
pr_debug("--------CPU State Data------------\n");
- pr_debug("Magic Number: %llx\n", reg_header->magic_number);
- pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset);
+ pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number));
+ pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset));
- vaddr += reg_header->num_cpu_offset;
- num_cpus = *((u32 *)(vaddr));
+ vaddr += be32_to_cpu(reg_header->num_cpu_offset);
+ num_cpus = be32_to_cpu(*((__be32 *)(vaddr)));
pr_debug("NumCpus : %u\n", num_cpus);
vaddr += sizeof(u32);
reg_entry = (struct fadump_reg_entry *)vaddr;
@@ -639,13 +639,13 @@
fdh = __va(fw_dump.fadumphdr_addr);
for (i = 0; i < num_cpus; i++) {
- if (reg_entry->reg_id != REG_ID("CPUSTRT")) {
+ if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) {
printk(KERN_ERR "Unable to read CPU state data\n");
rc = -ENOENT;
goto error_out;
}
/* Lower 4 bytes of reg_value contains logical cpu id */
- cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
+ cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
SKIP_TO_NEXT_CPU(reg_entry);
continue;
@@ -692,7 +692,7 @@
return -EINVAL;
/* Check if the dump data is valid. */
- if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) ||
+ if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) ||
(fdm_active->cpu_state_data.error_flags != 0) ||
(fdm_active->rmr_region.error_flags != 0)) {
printk(KERN_ERR "Dump taken by platform is not valid\n");
@@ -828,7 +828,7 @@
static inline unsigned long fadump_relocate(unsigned long paddr)
{
if (paddr > RMA_START && paddr < fw_dump.boot_memory_size)
- return fdm.rmr_region.destination_address + paddr;
+ return be64_to_cpu(fdm.rmr_region.destination_address) + paddr;
else
return paddr;
}
@@ -902,7 +902,7 @@
* to the specified destination_address. Hence set
* the correct offset.
*/
- phdr->p_offset = fdm.rmr_region.destination_address;
+ phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address);
}
phdr->p_paddr = mbase;
@@ -951,7 +951,7 @@
fadump_setup_crash_memory_ranges();
- addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len;
+ addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
/* Initialize fadump crash info header. */
addr = init_fadump_header(addr);
vaddr = __va(addr);
@@ -1023,7 +1023,7 @@
/* Invalidate the registration only if dump is active. */
if (fw_dump.dump_active) {
init_fadump_mem_struct(&fdm,
- fdm_active->cpu_state_data.destination_address);
+ be64_to_cpu(fdm_active->cpu_state_data.destination_address));
fadump_invalidate_dump(&fdm);
}
}
@@ -1063,7 +1063,7 @@
return;
}
- destination_address = fdm_active->cpu_state_data.destination_address;
+ destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
fadump_cleanup();
mutex_unlock(&fadump_mutex);
@@ -1183,31 +1183,31 @@
seq_printf(m,
"CPU : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->cpu_state_data.destination_address,
- fdm_ptr->cpu_state_data.destination_address +
- fdm_ptr->cpu_state_data.source_len - 1,
- fdm_ptr->cpu_state_data.source_len,
- fdm_ptr->cpu_state_data.bytes_dumped);
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address),
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) +
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len),
+ be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped));
seq_printf(m,
"HPTE: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->hpte_region.destination_address,
- fdm_ptr->hpte_region.destination_address +
- fdm_ptr->hpte_region.source_len - 1,
- fdm_ptr->hpte_region.source_len,
- fdm_ptr->hpte_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address),
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address) +
+ be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->hpte_region.source_len),
+ be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped));
seq_printf(m,
"DUMP: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->rmr_region.destination_address,
- fdm_ptr->rmr_region.destination_address +
- fdm_ptr->rmr_region.source_len - 1,
- fdm_ptr->rmr_region.source_len,
- fdm_ptr->rmr_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address),
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address) +
+ be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->rmr_region.source_len),
+ be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped));
if (!fdm_active ||
(fw_dump.reserve_dump_area_start ==
- fdm_ptr->cpu_state_data.destination_address))
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address)))
goto out;
/* Dump is active. Show reserved memory region. */
@@ -1215,10 +1215,10 @@
" : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
(unsigned long long)fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address - 1,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start);
out:
if (fdm_active)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index cad68ff..415a51b 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -103,7 +103,7 @@
/*
* Check for command-line options that affect what MMU_init will do.
*/
-void MMU_setup(void)
+void __init MMU_setup(void)
{
/* Check for nobats option (used in mapin_ram). */
if (strstr(boot_command_line, "nobats")) {
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index ad4b31d..e4169d6 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -216,14 +216,54 @@
&data, len);
if (rc)
return -ENXIO;
+
+ /*
+ * Now there is some trickery with the data returned by OPAL
+ * as it's the desired data right justified in a 32-bit BE
+ * word.
+ *
+ * This is a very bad interface and I'm to blame for it :-(
+ *
+ * So we can't just apply a 32-bit swap to what comes from OPAL,
+ * because user space expects the *bytes* to be in their proper
+ * respective positions (ie, LPC position).
+ *
+ * So what we really want to do here is to shift data right
+ * appropriately on a LE kernel.
+ *
+ * IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that
+ * order, we have in memory written to by OPAL at the "data"
+ * pointer:
+ *
+ * Bytes: OPAL "data" LE "data"
+ * 32-bit: B0 B1 B2 B3 B0B1B2B3 B3B2B1B0
+ * 16-bit: B0 B1 0000B0B1 B1B00000
+ * 8-bit: B0 000000B0 B0000000
+ *
+ * So a BE kernel will have the leftmost of the above in the MSB
+ * and rightmost in the LSB and can just then "cast" the u32 "data"
+ * down to the appropriate quantity and write it.
+ *
+ * However, an LE kernel can't. It doesn't need to swap because a
+ * load from data followed by a store to user are going to preserve
+ * the byte ordering which is the wire byte order which is what the
+ * user wants, but in order to "crop" to the right size, we need to
+ * shift right first.
+ */
switch(len) {
case 4:
rc = __put_user((u32)data, (u32 __user *)ubuf);
break;
case 2:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 16;
+#endif
rc = __put_user((u16)data, (u16 __user *)ubuf);
break;
default:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 24;
+#endif
rc = __put_user((u8)data, (u8 __user *)ubuf);
break;
}
@@ -263,12 +303,31 @@
else if (todo > 1 && (pos & 1) == 0)
len = 2;
}
+
+ /*
+ * Similarly to the read case, we have some trickery here but
+ * it's different to handle. We need to pass the value to OPAL in
+ * a register whose layout depends on the access size. We want
+ * to reproduce the memory layout of the user, however we aren't
+ * doing a load from user and a store to another memory location
+ * which would achieve that. Here we pass the value to OPAL via
+ * a register which is expected to contain the "BE" interpretation
+ * of the byte sequence. IE: for a 32-bit access, byte 0 should be
+ * in the MSB. So here we *do* need to byteswap on LE.
+ *
+ * User bytes: LE "data" OPAL "data"
+ * 32-bit: B0 B1 B2 B3 B3B2B1B0 B0B1B2B3
+ * 16-bit: B0 B1 0000B1B0 0000B0B1
+ * 8-bit: B0 000000B0 000000B0
+ */
switch(len) {
case 4:
rc = __get_user(data, (u32 __user *)ubuf);
+ data = cpu_to_be32(data);
break;
case 2:
rc = __get_user(data, (u16 __user *)ubuf);
+ data = cpu_to_be16(data);
break;
default:
rc = __get_user(data, (u8 __user *)ubuf);
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 6ad83bd..c22bb1b 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -382,7 +382,7 @@
BUG_ON(get_cpu_current_state(cpu)
!= CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_up(cpu);
+ rc = device_online(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
@@ -467,7 +467,7 @@
if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_down(cpu);
+ rc = device_offline(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 8c509d5..f6880d2 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -43,6 +43,7 @@
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
+#include <asm/fadump.h>
#include "pseries.h"
@@ -247,8 +248,17 @@
}
#ifdef __LITTLE_ENDIAN__
- /* Reset exceptions to big endian */
- if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
+ /*
+ * Reset exceptions to big endian.
+ *
+ * FIXME this is a hack for kexec, we need to reset the exception
+ * endian before starting the new kernel and this is a convenient place
+ * to do it.
+ *
+ * This is also called on boot when a fadump happens. In that case we
+ * must not change the exception endian mode.
+ */
+ if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) {
long rc;
rc = pseries_big_endian_exceptions();
diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig
index 9d94fdd..9432d0f 100644
--- a/arch/s390/configs/default_defconfig
+++ b/arch/s390/configs/default_defconfig
@@ -35,7 +35,6 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@@ -245,6 +244,7 @@
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -252,11 +252,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -270,6 +265,7 @@
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -286,9 +282,6 @@
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@@ -374,14 +367,13 @@
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@@ -427,7 +419,6 @@
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@@ -481,14 +472,14 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@@ -574,7 +565,6 @@
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
@@ -600,8 +590,13 @@
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_PREEMPT_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
@@ -609,7 +604,10 @@
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_STRING_HELPERS=y
+CONFIG_TEST_KSTRTOX=y
CONFIG_DMA_API_DEBUG=y
+CONFIG_TEST_BPF=m
# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
@@ -673,12 +671,6 @@
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig
index 90f514b..219dca6 100644
--- a/arch/s390/configs/gcov_defconfig
+++ b/arch/s390/configs/gcov_defconfig
@@ -35,7 +35,6 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@@ -243,6 +242,7 @@
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -250,11 +250,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -268,6 +263,7 @@
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -284,9 +280,6 @@
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@@ -371,14 +364,13 @@
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@@ -424,7 +416,6 @@
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@@ -478,13 +469,13 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@@ -626,12 +617,6 @@
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig
index 13559d3..822c2f2 100644
--- a/arch/s390/configs/performance_defconfig
+++ b/arch/s390/configs/performance_defconfig
@@ -33,7 +33,6 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@@ -241,6 +240,7 @@
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -248,11 +248,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -266,6 +261,7 @@
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -282,9 +278,6 @@
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@@ -369,14 +362,13 @@
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@@ -422,7 +414,6 @@
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@@ -476,13 +467,13 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@@ -550,8 +541,11 @@
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
@@ -618,12 +612,6 @@
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index e376789..9d63051 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -22,8 +22,8 @@
CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SECCOMP is not set
-# CONFIG_IUCV is not set
CONFIG_NET=y
+# CONFIG_IUCV is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -36,9 +36,9 @@
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_ENCLOSURE=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_ZFCP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -75,12 +75,6 @@
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
# CONFIG_STRICT_DEVMEM is not set
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
# CONFIG_PFAULT is not set
# CONFIG_S390_HYPFS_FS is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index fab35a8..785c5f2 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -92,10 +92,10 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=y
CONFIG_NETDEVICES=y
@@ -164,14 +164,13 @@
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 51d14fe5..ca1cabb 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -121,6 +121,8 @@
{
struct ftrace_graph_ent trace;
+ if (unlikely(ftrace_graph_is_dead()))
+ goto out;
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
goto out;
ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index 48c2206..5eec9af 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -19,6 +19,7 @@
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,21f-0b(%r5) /* get &_vdso_data */
chi %r2,__CLOCK_REALTIME_COARSE
@@ -34,8 +35,8 @@
1: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
@@ -70,6 +71,7 @@
8: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
@@ -96,8 +98,8 @@
11: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 11b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
@@ -132,11 +134,13 @@
17: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* Fallback to system call */
19: lhi %r1,__NR_clock_gettime
svc 0
+ ahi %r15,16
br %r14
20: .long 1000000000
diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S
index 60def5f..719de61 100644
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@@ -19,6 +19,7 @@
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,13f-0b(%r5) /* get &_vdso_data */
1: ltr %r3,%r3 /* check if tz is NULL */
@@ -29,30 +30,30 @@
l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
- st %r0,24(%r15)
+ st %r0,0(%r15)
l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
a %r0,__VDSO_TK_MULT(%r5)
-4: al %r0,24(%r15)
+4: al %r0,0(%r15)
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,5f
ahi %r0,1
-5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
+5: mvc 0(4,%r15),__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
srdl %r0,0(%r4) /* >> tk->shift */
- l %r4,24(%r15) /* get tv_sec from stack */
+ l %r4,0(%r15) /* get tv_sec from stack */
basr %r5,0
6: ltr %r0,%r0
jnz 7f
@@ -71,6 +72,7 @@
9: srl %r0,6
st %r0,4(%r2) /* store tv->tv_usec */
10: slr %r2,%r2
+ ahi %r15,16
br %r14
11: .long 1000000000
12: .long 274877907
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 9d9761f..7699e73 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -19,6 +19,7 @@
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
cghi %r2,__CLOCK_REALTIME_COARSE
je 4f
@@ -37,10 +38,10 @@
0: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r0,__VDSO_WTOM_SEC(%r5)
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_WTOM_NSEC(%r5)
@@ -56,6 +57,7 @@
2: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
@@ -82,9 +84,9 @@
5: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 5b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
@@ -101,6 +103,7 @@
7: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_THREAD_CPUTIME_ID for this thread */
@@ -134,11 +137,13 @@
slgr %r4,%r0 /* r4 = tv_nsec */
stg %r4,8(%r3)
lghi %r2,0
+ aghi %r15,16
br %r14
/* Fallback to system call */
12: lghi %r1,__NR_clock_gettime
svc 0
+ aghi %r15,16
br %r14
13: .quad 1000000000
diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S
index 7a34499..6ce4670 100644
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@@ -19,6 +19,7 @@
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
0: ltgr %r3,%r3 /* check if tz is NULL */
je 1f
@@ -28,8 +29,8 @@
lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
- lg %r1,49(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
@@ -50,6 +51,7 @@
srlg %r0,%r0,6
stg %r0,8(%r2) /* store tv->tv_usec */
4: lghi %r2,0
+ aghi %r15,16
br %r14
5: .quad 1000000000
.long 274877907
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 416f2a3..7f0089d 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -66,7 +66,11 @@
clock = S390_lowcore.last_update_clock;
asm volatile(
" stpt %0\n" /* Store current cpu timer value */
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+ " stckf %1" /* Store current tod clock value */
+#else
" stck %1" /* Store current tod clock value */
+#endif
: "=m" (S390_lowcore.last_update_timer),
"=m" (S390_lowcore.last_update_clock));
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 61a33f4..df04227 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -171,20 +171,23 @@
Drivers should "select" this option if they desire to use the
device coredump mechanism.
-config DISABLE_DEV_COREDUMP
- bool "Disable device coredump" if EXPERT
+config ALLOW_DEV_COREDUMP
+ bool "Allow device coredump" if EXPERT
+ default y
help
- Disable the device coredump mechanism despite drivers wanting to
- use it; this allows for more sensitive systems or systems that
- don't want to ever access the information to not have the code,
- nor keep any data.
+ This option controls if the device coredump mechanism is available or
+ not; if disabled, the mechanism will be omitted even if drivers that
+ can use it are enabled.
+ Say 'N' for more sensitive systems or systems that don't want
+ to ever access the information to not have the code, nor keep any
+ data.
- If unsure, say N.
+ If unsure, say Y.
config DEV_COREDUMP
bool
default y if WANT_DEV_COREDUMP
- depends on !DISABLE_DEV_COREDUMP
+ depends on ALLOW_DEV_COREDUMP
config DEBUG_DRIVER
bool "Driver Core verbose debug messages"
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 14d1629..842d047 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -724,12 +724,12 @@
return &dir->kobj;
}
+static DEFINE_MUTEX(gdp_mutex);
static struct kobject *get_device_parent(struct device *dev,
struct device *parent)
{
if (dev->class) {
- static DEFINE_MUTEX(gdp_mutex);
struct kobject *kobj = NULL;
struct kobject *parent_kobj;
struct kobject *k;
@@ -793,7 +793,9 @@
glue_dir->kset != &dev->class->p->glue_dirs)
return;
+ mutex_lock(&gdp_mutex);
kobject_put(glue_dir);
+ mutex_unlock(&gdp_mutex);
}
static void cleanup_device_parent(struct device *dev)
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 0a54c58..27b71a0 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -342,7 +342,6 @@
struct list_head rq_queue; /* incoming rq queue */
spinlock_t lock; /* queue, flags, open_count */
- struct workqueue_struct *rq_wq;
struct work_struct rq_work;
struct rbd_image_header header;
@@ -402,6 +401,8 @@
static int rbd_major;
static DEFINE_IDA(rbd_dev_id_ida);
+static struct workqueue_struct *rbd_wq;
+
/*
* Default to false for now, as single-major requires >= 0.75 version of
* userspace rbd utility.
@@ -3452,7 +3453,7 @@
}
if (queued)
- queue_work(rbd_dev->rq_wq, &rbd_dev->rq_work);
+ queue_work(rbd_wq, &rbd_dev->rq_work);
}
/*
@@ -3532,7 +3533,7 @@
page_count = (u32) calc_pages_for(offset, length);
pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
if (IS_ERR(pages))
- ret = PTR_ERR(pages);
+ return PTR_ERR(pages);
ret = -ENOMEM;
obj_request = rbd_obj_request_create(object_name, offset, length,
@@ -5242,16 +5243,9 @@
set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE);
set_disk_ro(rbd_dev->disk, rbd_dev->mapping.read_only);
- rbd_dev->rq_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
- rbd_dev->disk->disk_name);
- if (!rbd_dev->rq_wq) {
- ret = -ENOMEM;
- goto err_out_mapping;
- }
-
ret = rbd_bus_add_dev(rbd_dev);
if (ret)
- goto err_out_workqueue;
+ goto err_out_mapping;
/* Everything's ready. Announce the disk to the world. */
@@ -5263,9 +5257,6 @@
return ret;
-err_out_workqueue:
- destroy_workqueue(rbd_dev->rq_wq);
- rbd_dev->rq_wq = NULL;
err_out_mapping:
rbd_dev_mapping_clear(rbd_dev);
err_out_disk:
@@ -5512,7 +5503,6 @@
{
struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
- destroy_workqueue(rbd_dev->rq_wq);
rbd_free_disk(rbd_dev);
clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags);
rbd_dev_mapping_clear(rbd_dev);
@@ -5716,11 +5706,21 @@
if (rc)
return rc;
+ /*
+ * The number of active work items is limited by the number of
+ * rbd devices, so leave @max_active at default.
+ */
+ rbd_wq = alloc_workqueue(RBD_DRV_NAME, WQ_MEM_RECLAIM, 0);
+ if (!rbd_wq) {
+ rc = -ENOMEM;
+ goto err_out_slab;
+ }
+
if (single_major) {
rbd_major = register_blkdev(0, RBD_DRV_NAME);
if (rbd_major < 0) {
rc = rbd_major;
- goto err_out_slab;
+ goto err_out_wq;
}
}
@@ -5738,6 +5738,8 @@
err_out_blkdev:
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+err_out_wq:
+ destroy_workqueue(rbd_wq);
err_out_slab:
rbd_slab_exit();
return rc;
@@ -5749,6 +5751,7 @@
rbd_sysfs_cleanup();
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+ destroy_workqueue(rbd_wq);
rbd_slab_exit();
}
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index de46982..8b6fb0f 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -107,6 +107,13 @@
help
Support the Atmel AHB DMA controller.
+config AT_XDMAC
+ tristate "Atmel XDMA support"
+ depends on ARCH_AT91
+ select DMA_ENGINE
+ help
+ Support the Atmel XDMA controller.
+
config FSL_DMA
tristate "Freescale Elo series DMA support"
depends on FSL_SOC
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index cb626c1..2022b54 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC_CORE) += dw/
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
+obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
obj-$(CONFIG_SH_DMAE_BASE) += sh/
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
new file mode 100644
index 0000000..b60d77a2
--- /dev/null
+++ b/drivers/dma/at_xdmac.c
@@ -0,0 +1,1524 @@
+/*
+ * Driver for the Atmel Extensible DMA Controller (aka XDMAC on AT91 systems)
+ *
+ * Copyright (C) 2014 Atmel Corporation
+ *
+ * Author: Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/barrier.h>
+#include <dt-bindings/dma/at91.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_dma.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include "dmaengine.h"
+
+/* Global registers */
+#define AT_XDMAC_GTYPE 0x00 /* Global Type Register */
+#define AT_XDMAC_NB_CH(i) (((i) & 0x1F) + 1) /* Number of Channels Minus One */
+#define AT_XDMAC_FIFO_SZ(i) (((i) >> 5) & 0x7FF) /* Number of Bytes */
+#define AT_XDMAC_NB_REQ(i) ((((i) >> 16) & 0x3F) + 1) /* Number of Peripheral Requests Minus One */
+#define AT_XDMAC_GCFG 0x04 /* Global Configuration Register */
+#define AT_XDMAC_GWAC 0x08 /* Global Weighted Arbiter Configuration Register */
+#define AT_XDMAC_GIE 0x0C /* Global Interrupt Enable Register */
+#define AT_XDMAC_GID 0x10 /* Global Interrupt Disable Register */
+#define AT_XDMAC_GIM 0x14 /* Global Interrupt Mask Register */
+#define AT_XDMAC_GIS 0x18 /* Global Interrupt Status Register */
+#define AT_XDMAC_GE 0x1C /* Global Channel Enable Register */
+#define AT_XDMAC_GD 0x20 /* Global Channel Disable Register */
+#define AT_XDMAC_GS 0x24 /* Global Channel Status Register */
+#define AT_XDMAC_GRS 0x28 /* Global Channel Read Suspend Register */
+#define AT_XDMAC_GWS 0x2C /* Global Write Suspend Register */
+#define AT_XDMAC_GRWS 0x30 /* Global Channel Read Write Suspend Register */
+#define AT_XDMAC_GRWR 0x34 /* Global Channel Read Write Resume Register */
+#define AT_XDMAC_GSWR 0x38 /* Global Channel Software Request Register */
+#define AT_XDMAC_GSWS 0x3C /* Global channel Software Request Status Register */
+#define AT_XDMAC_GSWF 0x40 /* Global Channel Software Flush Request Register */
+#define AT_XDMAC_VERSION 0xFFC /* XDMAC Version Register */
+
+/* Channel relative registers offsets */
+#define AT_XDMAC_CIE 0x00 /* Channel Interrupt Enable Register */
+#define AT_XDMAC_CIE_BIE BIT(0) /* End of Block Interrupt Enable Bit */
+#define AT_XDMAC_CIE_LIE BIT(1) /* End of Linked List Interrupt Enable Bit */
+#define AT_XDMAC_CIE_DIE BIT(2) /* End of Disable Interrupt Enable Bit */
+#define AT_XDMAC_CIE_FIE BIT(3) /* End of Flush Interrupt Enable Bit */
+#define AT_XDMAC_CIE_RBEIE BIT(4) /* Read Bus Error Interrupt Enable Bit */
+#define AT_XDMAC_CIE_WBEIE BIT(5) /* Write Bus Error Interrupt Enable Bit */
+#define AT_XDMAC_CIE_ROIE BIT(6) /* Request Overflow Interrupt Enable Bit */
+#define AT_XDMAC_CID 0x04 /* Channel Interrupt Disable Register */
+#define AT_XDMAC_CID_BID BIT(0) /* End of Block Interrupt Disable Bit */
+#define AT_XDMAC_CID_LID BIT(1) /* End of Linked List Interrupt Disable Bit */
+#define AT_XDMAC_CID_DID BIT(2) /* End of Disable Interrupt Disable Bit */
+#define AT_XDMAC_CID_FID BIT(3) /* End of Flush Interrupt Disable Bit */
+#define AT_XDMAC_CID_RBEID BIT(4) /* Read Bus Error Interrupt Disable Bit */
+#define AT_XDMAC_CID_WBEID BIT(5) /* Write Bus Error Interrupt Disable Bit */
+#define AT_XDMAC_CID_ROID BIT(6) /* Request Overflow Interrupt Disable Bit */
+#define AT_XDMAC_CIM 0x08 /* Channel Interrupt Mask Register */
+#define AT_XDMAC_CIM_BIM BIT(0) /* End of Block Interrupt Mask Bit */
+#define AT_XDMAC_CIM_LIM BIT(1) /* End of Linked List Interrupt Mask Bit */
+#define AT_XDMAC_CIM_DIM BIT(2) /* End of Disable Interrupt Mask Bit */
+#define AT_XDMAC_CIM_FIM BIT(3) /* End of Flush Interrupt Mask Bit */
+#define AT_XDMAC_CIM_RBEIM BIT(4) /* Read Bus Error Interrupt Mask Bit */
+#define AT_XDMAC_CIM_WBEIM BIT(5) /* Write Bus Error Interrupt Mask Bit */
+#define AT_XDMAC_CIM_ROIM BIT(6) /* Request Overflow Interrupt Mask Bit */
+#define AT_XDMAC_CIS 0x0C /* Channel Interrupt Status Register */
+#define AT_XDMAC_CIS_BIS BIT(0) /* End of Block Interrupt Status Bit */
+#define AT_XDMAC_CIS_LIS BIT(1) /* End of Linked List Interrupt Status Bit */
+#define AT_XDMAC_CIS_DIS BIT(2) /* End of Disable Interrupt Status Bit */
+#define AT_XDMAC_CIS_FIS BIT(3) /* End of Flush Interrupt Status Bit */
+#define AT_XDMAC_CIS_RBEIS BIT(4) /* Read Bus Error Interrupt Status Bit */
+#define AT_XDMAC_CIS_WBEIS BIT(5) /* Write Bus Error Interrupt Status Bit */
+#define AT_XDMAC_CIS_ROIS BIT(6) /* Request Overflow Interrupt Status Bit */
+#define AT_XDMAC_CSA 0x10 /* Channel Source Address Register */
+#define AT_XDMAC_CDA 0x14 /* Channel Destination Address Register */
+#define AT_XDMAC_CNDA 0x18 /* Channel Next Descriptor Address Register */
+#define AT_XDMAC_CNDA_NDAIF(i) ((i) & 0x1) /* Channel x Next Descriptor Interface */
+#define AT_XDMAC_CNDA_NDA(i) ((i) & 0xfffffffc) /* Channel x Next Descriptor Address */
+#define AT_XDMAC_CNDC 0x1C /* Channel Next Descriptor Control Register */
+#define AT_XDMAC_CNDC_NDE (0x1 << 0) /* Channel x Next Descriptor Enable */
+#define AT_XDMAC_CNDC_NDSUP (0x1 << 1) /* Channel x Next Descriptor Source Update */
+#define AT_XDMAC_CNDC_NDDUP (0x1 << 2) /* Channel x Next Descriptor Destination Update */
+#define AT_XDMAC_CNDC_NDVIEW_NDV0 (0x0 << 3) /* Channel x Next Descriptor View 0 */
+#define AT_XDMAC_CNDC_NDVIEW_NDV1 (0x1 << 3) /* Channel x Next Descriptor View 1 */
+#define AT_XDMAC_CNDC_NDVIEW_NDV2 (0x2 << 3) /* Channel x Next Descriptor View 2 */
+#define AT_XDMAC_CNDC_NDVIEW_NDV3 (0x3 << 3) /* Channel x Next Descriptor View 3 */
+#define AT_XDMAC_CUBC 0x20 /* Channel Microblock Control Register */
+#define AT_XDMAC_CBC 0x24 /* Channel Block Control Register */
+#define AT_XDMAC_CC 0x28 /* Channel Configuration Register */
+#define AT_XDMAC_CC_TYPE (0x1 << 0) /* Channel Transfer Type */
+#define AT_XDMAC_CC_TYPE_MEM_TRAN (0x0 << 0) /* Memory to Memory Transfer */
+#define AT_XDMAC_CC_TYPE_PER_TRAN (0x1 << 0) /* Peripheral to Memory or Memory to Peripheral Transfer */
+#define AT_XDMAC_CC_MBSIZE_MASK (0x3 << 1)
+#define AT_XDMAC_CC_MBSIZE_SINGLE (0x0 << 1)
+#define AT_XDMAC_CC_MBSIZE_FOUR (0x1 << 1)
+#define AT_XDMAC_CC_MBSIZE_EIGHT (0x2 << 1)
+#define AT_XDMAC_CC_MBSIZE_SIXTEEN (0x3 << 1)
+#define AT_XDMAC_CC_DSYNC (0x1 << 4) /* Channel Synchronization */
+#define AT_XDMAC_CC_DSYNC_PER2MEM (0x0 << 4)
+#define AT_XDMAC_CC_DSYNC_MEM2PER (0x1 << 4)
+#define AT_XDMAC_CC_PROT (0x1 << 5) /* Channel Protection */
+#define AT_XDMAC_CC_PROT_SEC (0x0 << 5)
+#define AT_XDMAC_CC_PROT_UNSEC (0x1 << 5)
+#define AT_XDMAC_CC_SWREQ (0x1 << 6) /* Channel Software Request Trigger */
+#define AT_XDMAC_CC_SWREQ_HWR_CONNECTED (0x0 << 6)
+#define AT_XDMAC_CC_SWREQ_SWR_CONNECTED (0x1 << 6)
+#define AT_XDMAC_CC_MEMSET (0x1 << 7) /* Channel Fill Block of memory */
+#define AT_XDMAC_CC_MEMSET_NORMAL_MODE (0x0 << 7)
+#define AT_XDMAC_CC_MEMSET_HW_MODE (0x1 << 7)
+#define AT_XDMAC_CC_CSIZE(i) ((0x7 & (i)) << 8) /* Channel Chunk Size */
+#define AT_XDMAC_CC_DWIDTH_OFFSET 11
+#define AT_XDMAC_CC_DWIDTH_MASK (0x3 << AT_XDMAC_CC_DWIDTH_OFFSET)
+#define AT_XDMAC_CC_DWIDTH(i) ((0x3 & (i)) << AT_XDMAC_CC_DWIDTH_OFFSET) /* Channel Data Width */
+#define AT_XDMAC_CC_DWIDTH_BYTE 0x0
+#define AT_XDMAC_CC_DWIDTH_HALFWORD 0x1
+#define AT_XDMAC_CC_DWIDTH_WORD 0x2
+#define AT_XDMAC_CC_DWIDTH_DWORD 0x3
+#define AT_XDMAC_CC_SIF(i) ((0x1 & (i)) << 13) /* Channel Source Interface Identifier */
+#define AT_XDMAC_CC_DIF(i) ((0x1 & (i)) << 14) /* Channel Destination Interface Identifier */
+#define AT_XDMAC_CC_SAM_MASK (0x3 << 16) /* Channel Source Addressing Mode */
+#define AT_XDMAC_CC_SAM_FIXED_AM (0x0 << 16)
+#define AT_XDMAC_CC_SAM_INCREMENTED_AM (0x1 << 16)
+#define AT_XDMAC_CC_SAM_UBS_AM (0x2 << 16)
+#define AT_XDMAC_CC_SAM_UBS_DS_AM (0x3 << 16)
+#define AT_XDMAC_CC_DAM_MASK (0x3 << 18) /* Channel Source Addressing Mode */
+#define AT_XDMAC_CC_DAM_FIXED_AM (0x0 << 18)
+#define AT_XDMAC_CC_DAM_INCREMENTED_AM (0x1 << 18)
+#define AT_XDMAC_CC_DAM_UBS_AM (0x2 << 18)
+#define AT_XDMAC_CC_DAM_UBS_DS_AM (0x3 << 18)
+#define AT_XDMAC_CC_INITD (0x1 << 21) /* Channel Initialization Terminated (read only) */
+#define AT_XDMAC_CC_INITD_TERMINATED (0x0 << 21)
+#define AT_XDMAC_CC_INITD_IN_PROGRESS (0x1 << 21)
+#define AT_XDMAC_CC_RDIP (0x1 << 22) /* Read in Progress (read only) */
+#define AT_XDMAC_CC_RDIP_DONE (0x0 << 22)
+#define AT_XDMAC_CC_RDIP_IN_PROGRESS (0x1 << 22)
+#define AT_XDMAC_CC_WRIP (0x1 << 23) /* Write in Progress (read only) */
+#define AT_XDMAC_CC_WRIP_DONE (0x0 << 23)
+#define AT_XDMAC_CC_WRIP_IN_PROGRESS (0x1 << 23)
+#define AT_XDMAC_CC_PERID(i) (0x7f & (h) << 24) /* Channel Peripheral Identifier */
+#define AT_XDMAC_CDS_MSP 0x2C /* Channel Data Stride Memory Set Pattern */
+#define AT_XDMAC_CSUS 0x30 /* Channel Source Microblock Stride */
+#define AT_XDMAC_CDUS 0x34 /* Channel Destination Microblock Stride */
+
+#define AT_XDMAC_CHAN_REG_BASE 0x50 /* Channel registers base address */
+
+/* Microblock control members */
+#define AT_XDMAC_MBR_UBC_UBLEN_MAX 0xFFFFFFUL /* Maximum Microblock Length */
+#define AT_XDMAC_MBR_UBC_NDE (0x1 << 24) /* Next Descriptor Enable */
+#define AT_XDMAC_MBR_UBC_NSEN (0x1 << 25) /* Next Descriptor Source Update */
+#define AT_XDMAC_MBR_UBC_NDEN (0x1 << 26) /* Next Descriptor Destination Update */
+#define AT_XDMAC_MBR_UBC_NDV0 (0x0 << 27) /* Next Descriptor View 0 */
+#define AT_XDMAC_MBR_UBC_NDV1 (0x1 << 27) /* Next Descriptor View 1 */
+#define AT_XDMAC_MBR_UBC_NDV2 (0x2 << 27) /* Next Descriptor View 2 */
+#define AT_XDMAC_MBR_UBC_NDV3 (0x3 << 27) /* Next Descriptor View 3 */
+
+#define AT_XDMAC_MAX_CHAN 0x20
+
+enum atc_status {
+ AT_XDMAC_CHAN_IS_CYCLIC = 0,
+ AT_XDMAC_CHAN_IS_PAUSED,
+};
+
+/* ----- Channels ----- */
+struct at_xdmac_chan {
+ struct dma_chan chan;
+ void __iomem *ch_regs;
+ u32 mask; /* Channel Mask */
+ u32 cfg[3]; /* Channel Configuration Register */
+ #define AT_XDMAC_CUR_CFG 0 /* Current channel conf */
+ #define AT_XDMAC_DEV_TO_MEM_CFG 1 /* Predifined dev to mem channel conf */
+ #define AT_XDMAC_MEM_TO_DEV_CFG 2 /* Predifined mem to dev channel conf */
+ u8 perid; /* Peripheral ID */
+ u8 perif; /* Peripheral Interface */
+ u8 memif; /* Memory Interface */
+ u32 per_src_addr;
+ u32 per_dst_addr;
+ u32 save_cim;
+ u32 save_cnda;
+ u32 save_cndc;
+ unsigned long status;
+ struct tasklet_struct tasklet;
+
+ spinlock_t lock;
+
+ struct list_head xfers_list;
+ struct list_head free_descs_list;
+};
+
+
+/* ----- Controller ----- */
+struct at_xdmac {
+ struct dma_device dma;
+ void __iomem *regs;
+ int irq;
+ struct clk *clk;
+ u32 save_gim;
+ u32 save_gs;
+ struct dma_pool *at_xdmac_desc_pool;
+ struct at_xdmac_chan chan[0];
+};
+
+
+/* ----- Descriptors ----- */
+
+/* Linked List Descriptor */
+struct at_xdmac_lld {
+ dma_addr_t mbr_nda; /* Next Descriptor Member */
+ u32 mbr_ubc; /* Microblock Control Member */
+ dma_addr_t mbr_sa; /* Source Address Member */
+ dma_addr_t mbr_da; /* Destination Address Member */
+ u32 mbr_cfg; /* Configuration Register */
+};
+
+
+struct at_xdmac_desc {
+ struct at_xdmac_lld lld;
+ enum dma_transfer_direction direction;
+ struct dma_async_tx_descriptor tx_dma_desc;
+ struct list_head desc_node;
+ /* Following members are only used by the first descriptor */
+ bool active_xfer;
+ unsigned int xfer_size;
+ struct list_head descs_list;
+ struct list_head xfer_node;
+};
+
+static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb)
+{
+ return atxdmac->regs + (AT_XDMAC_CHAN_REG_BASE + chan_nb * 0x40);
+}
+
+#define at_xdmac_read(atxdmac, reg) readl_relaxed((atxdmac)->regs + (reg))
+#define at_xdmac_write(atxdmac, reg, value) \
+ writel_relaxed((value), (atxdmac)->regs + (reg))
+
+#define at_xdmac_chan_read(atchan, reg) readl_relaxed((atchan)->ch_regs + (reg))
+#define at_xdmac_chan_write(atchan, reg, value) writel_relaxed((value), (atchan)->ch_regs + (reg))
+
+static inline struct at_xdmac_chan *to_at_xdmac_chan(struct dma_chan *dchan)
+{
+ return container_of(dchan, struct at_xdmac_chan, chan);
+}
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+ return &chan->dev->device;
+}
+
+static inline struct at_xdmac *to_at_xdmac(struct dma_device *ddev)
+{
+ return container_of(ddev, struct at_xdmac, dma);
+}
+
+static inline struct at_xdmac_desc *txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+ return container_of(txd, struct at_xdmac_desc, tx_dma_desc);
+}
+
+static inline int at_xdmac_chan_is_cyclic(struct at_xdmac_chan *atchan)
+{
+ return test_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status);
+}
+
+static inline int at_xdmac_chan_is_paused(struct at_xdmac_chan *atchan)
+{
+ return test_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
+}
+
+static inline int at_xdmac_csize(u32 maxburst)
+{
+ int csize;
+
+ csize = ffs(maxburst) - 1;
+ if (csize > 4)
+ csize = -EINVAL;
+
+ return csize;
+};
+
+static inline u8 at_xdmac_get_dwidth(u32 cfg)
+{
+ return (cfg & AT_XDMAC_CC_DWIDTH_MASK) >> AT_XDMAC_CC_DWIDTH_OFFSET;
+};
+
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+ "initial descriptors per channel (default: 64)");
+
+
+static bool at_xdmac_chan_is_enabled(struct at_xdmac_chan *atchan)
+{
+ return at_xdmac_chan_read(atchan, AT_XDMAC_GS) & atchan->mask;
+}
+
+static void at_xdmac_off(struct at_xdmac *atxdmac)
+{
+ at_xdmac_write(atxdmac, AT_XDMAC_GD, -1L);
+
+ /* Wait that all chans are disabled. */
+ while (at_xdmac_read(atxdmac, AT_XDMAC_GS))
+ cpu_relax();
+
+ at_xdmac_write(atxdmac, AT_XDMAC_GID, -1L);
+}
+
+/* Call with lock hold. */
+static void at_xdmac_start_xfer(struct at_xdmac_chan *atchan,
+ struct at_xdmac_desc *first)
+{
+ struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ u32 reg;
+
+ dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, first);
+
+ if (at_xdmac_chan_is_enabled(atchan))
+ return;
+
+ /* Set transfer as active to not try to start it again. */
+ first->active_xfer = true;
+
+ /* Tell xdmac where to get the first descriptor. */
+ reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys)
+ | AT_XDMAC_CNDA_NDAIF(atchan->memif);
+ at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, reg);
+
+ /*
+ * When doing memory to memory transfer we need to use the next
+ * descriptor view 2 since some fields of the configuration register
+ * depend on transfer size and src/dest addresses.
+ */
+ if (is_slave_direction(first->direction)) {
+ reg = AT_XDMAC_CNDC_NDVIEW_NDV1;
+ if (first->direction == DMA_MEM_TO_DEV)
+ atchan->cfg[AT_XDMAC_CUR_CFG] =
+ atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ else
+ atchan->cfg[AT_XDMAC_CUR_CFG] =
+ atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
+ at_xdmac_chan_write(atchan, AT_XDMAC_CC,
+ atchan->cfg[AT_XDMAC_CUR_CFG]);
+ } else {
+ /*
+ * No need to write AT_XDMAC_CC reg, it will be done when the
+ * descriptor is fecthed.
+ */
+ reg = AT_XDMAC_CNDC_NDVIEW_NDV2;
+ }
+
+ reg |= AT_XDMAC_CNDC_NDDUP
+ | AT_XDMAC_CNDC_NDSUP
+ | AT_XDMAC_CNDC_NDE;
+ at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, reg);
+
+ dev_vdbg(chan2dev(&atchan->chan),
+ "%s: CC=0x%08x CNDA=0x%08x, CNDC=0x%08x, CSA=0x%08x, CDA=0x%08x, CUBC=0x%08x\n",
+ __func__, at_xdmac_chan_read(atchan, AT_XDMAC_CC),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CNDA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CNDC),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CSA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
+
+ at_xdmac_chan_write(atchan, AT_XDMAC_CID, 0xffffffff);
+ reg = AT_XDMAC_CIE_RBEIE | AT_XDMAC_CIE_WBEIE | AT_XDMAC_CIE_ROIE;
+ /*
+ * There is no end of list when doing cyclic dma, we need to get
+ * an interrupt after each periods.
+ */
+ if (at_xdmac_chan_is_cyclic(atchan))
+ at_xdmac_chan_write(atchan, AT_XDMAC_CIE,
+ reg | AT_XDMAC_CIE_BIE);
+ else
+ at_xdmac_chan_write(atchan, AT_XDMAC_CIE,
+ reg | AT_XDMAC_CIE_LIE);
+ at_xdmac_write(atxdmac, AT_XDMAC_GIE, atchan->mask);
+ dev_vdbg(chan2dev(&atchan->chan),
+ "%s: enable channel (0x%08x)\n", __func__, atchan->mask);
+ wmb();
+ at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask);
+
+ dev_vdbg(chan2dev(&atchan->chan),
+ "%s: CC=0x%08x CNDA=0x%08x, CNDC=0x%08x, CSA=0x%08x, CDA=0x%08x, CUBC=0x%08x\n",
+ __func__, at_xdmac_chan_read(atchan, AT_XDMAC_CC),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CNDA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CNDC),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CSA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
+
+}
+
+static dma_cookie_t at_xdmac_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct at_xdmac_desc *desc = txd_to_at_desc(tx);
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(tx->chan);
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&atchan->lock);
+ cookie = dma_cookie_assign(tx);
+
+ dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
+ __func__, atchan, desc);
+ list_add_tail(&desc->xfer_node, &atchan->xfers_list);
+ if (list_is_singular(&atchan->xfers_list))
+ at_xdmac_start_xfer(atchan, desc);
+
+ spin_unlock_bh(&atchan->lock);
+ return cookie;
+}
+
+static struct at_xdmac_desc *at_xdmac_alloc_desc(struct dma_chan *chan,
+ gfp_t gfp_flags)
+{
+ struct at_xdmac_desc *desc;
+ struct at_xdmac *atxdmac = to_at_xdmac(chan->device);
+ dma_addr_t phys;
+
+ desc = dma_pool_alloc(atxdmac->at_xdmac_desc_pool, gfp_flags, &phys);
+ if (desc) {
+ memset(desc, 0, sizeof(*desc));
+ INIT_LIST_HEAD(&desc->descs_list);
+ dma_async_tx_descriptor_init(&desc->tx_dma_desc, chan);
+ desc->tx_dma_desc.tx_submit = at_xdmac_tx_submit;
+ desc->tx_dma_desc.phys = phys;
+ }
+
+ return desc;
+}
+
+/* Call must be protected by lock. */
+static struct at_xdmac_desc *at_xdmac_get_desc(struct at_xdmac_chan *atchan)
+{
+ struct at_xdmac_desc *desc;
+
+ if (list_empty(&atchan->free_descs_list)) {
+ desc = at_xdmac_alloc_desc(&atchan->chan, GFP_NOWAIT);
+ } else {
+ desc = list_first_entry(&atchan->free_descs_list,
+ struct at_xdmac_desc, desc_node);
+ list_del(&desc->desc_node);
+ desc->active_xfer = false;
+ }
+
+ return desc;
+}
+
+static struct dma_chan *at_xdmac_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *of_dma)
+{
+ struct at_xdmac *atxdmac = of_dma->of_dma_data;
+ struct at_xdmac_chan *atchan;
+ struct dma_chan *chan;
+ struct device *dev = atxdmac->dma.dev;
+
+ if (dma_spec->args_count != 1) {
+ dev_err(dev, "dma phandler args: bad number of args\n");
+ return NULL;
+ }
+
+ chan = dma_get_any_slave_channel(&atxdmac->dma);
+ if (!chan) {
+ dev_err(dev, "can't get a dma channel\n");
+ return NULL;
+ }
+
+ atchan = to_at_xdmac_chan(chan);
+ atchan->memif = AT91_XDMAC_DT_GET_MEM_IF(dma_spec->args[0]);
+ atchan->perif = AT91_XDMAC_DT_GET_PER_IF(dma_spec->args[0]);
+ atchan->perid = AT91_XDMAC_DT_GET_PERID(dma_spec->args[0]);
+ dev_dbg(dev, "chan dt cfg: memif=%u perif=%u perid=%u\n",
+ atchan->memif, atchan->perif, atchan->perid);
+
+ return chan;
+}
+
+static int at_xdmac_set_slave_config(struct dma_chan *chan,
+ struct dma_slave_config *sconfig)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ u8 dwidth;
+ int csize;
+
+ atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_FIXED_AM
+ | AT_XDMAC_CC_DIF(atchan->memif)
+ | AT_XDMAC_CC_SIF(atchan->perif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_PER2MEM
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = at_xdmac_csize(sconfig->src_maxburst);
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(sconfig->src_addr_width) - 1;
+ atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
+
+
+ atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_FIXED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+ | AT_XDMAC_CC_DIF(atchan->perif)
+ | AT_XDMAC_CC_SIF(atchan->memif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_MEM2PER
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = at_xdmac_csize(sconfig->dst_maxburst);
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(sconfig->dst_addr_width) - 1;
+ atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
+
+ /* Src and dst addr are needed to configure the link list descriptor. */
+ atchan->per_src_addr = sconfig->src_addr;
+ atchan->per_dst_addr = sconfig->dst_addr;
+
+ dev_dbg(chan2dev(chan),
+ "%s: cfg[dev2mem]=0x%08x, cfg[mem2dev]=0x%08x, per_src_addr=0x%08x, per_dst_addr=0x%08x\n",
+ __func__, atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG],
+ atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG],
+ atchan->per_src_addr, atchan->per_dst_addr);
+
+ return 0;
+}
+
+static struct dma_async_tx_descriptor *
+at_xdmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ struct at_xdmac_desc *first = NULL, *prev = NULL;
+ struct scatterlist *sg;
+ int i;
+ u32 cfg;
+ unsigned int xfer_size = 0;
+
+ if (!sgl)
+ return NULL;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(chan2dev(chan), "invalid DMA direction\n");
+ return NULL;
+ }
+
+ dev_dbg(chan2dev(chan), "%s: sg_len=%d, dir=%s, flags=0x%lx\n",
+ __func__, sg_len,
+ direction == DMA_MEM_TO_DEV ? "to device" : "from device",
+ flags);
+
+ /* Protect dma_sconfig field that can be modified by set_slave_conf. */
+ spin_lock_bh(&atchan->lock);
+
+ /* Prepare descriptors. */
+ for_each_sg(sgl, sg, sg_len, i) {
+ struct at_xdmac_desc *desc = NULL;
+ u32 len, mem;
+
+ len = sg_dma_len(sg);
+ mem = sg_dma_address(sg);
+ if (unlikely(!len)) {
+ dev_err(chan2dev(chan), "sg data length is zero\n");
+ spin_unlock_bh(&atchan->lock);
+ return NULL;
+ }
+ dev_dbg(chan2dev(chan), "%s: * sg%d len=%u, mem=0x%08x\n",
+ __func__, i, len, mem);
+
+ desc = at_xdmac_get_desc(atchan);
+ if (!desc) {
+ dev_err(chan2dev(chan), "can't get descriptor\n");
+ if (first)
+ list_splice_init(&first->descs_list, &atchan->free_descs_list);
+ spin_unlock_bh(&atchan->lock);
+ return NULL;
+ }
+
+ /* Linked list descriptor setup. */
+ if (direction == DMA_DEV_TO_MEM) {
+ desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_da = mem;
+ cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
+ } else {
+ desc->lld.mbr_sa = mem;
+ desc->lld.mbr_da = atchan->per_dst_addr;
+ cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ }
+ desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1 /* next descriptor view */
+ | AT_XDMAC_MBR_UBC_NDEN /* next descriptor dst parameter update */
+ | AT_XDMAC_MBR_UBC_NSEN /* next descriptor src parameter update */
+ | (i == sg_len - 1 ? 0 : AT_XDMAC_MBR_UBC_NDE) /* descriptor fetch */
+ | len / (1 << at_xdmac_get_dwidth(cfg)); /* microblock length */
+ dev_dbg(chan2dev(chan),
+ "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n",
+ __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc);
+
+ /* Chain lld. */
+ if (prev) {
+ prev->lld.mbr_nda = desc->tx_dma_desc.phys;
+ dev_dbg(chan2dev(chan),
+ "%s: chain lld: prev=0x%p, mbr_nda=%pad\n",
+ __func__, prev, &prev->lld.mbr_nda);
+ }
+
+ prev = desc;
+ if (!first)
+ first = desc;
+
+ dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n",
+ __func__, desc, first);
+ list_add_tail(&desc->desc_node, &first->descs_list);
+ xfer_size += len;
+ }
+
+ spin_unlock_bh(&atchan->lock);
+
+ first->tx_dma_desc.flags = flags;
+ first->xfer_size = xfer_size;
+ first->direction = direction;
+
+ return &first->tx_dma_desc;
+}
+
+static struct dma_async_tx_descriptor *
+at_xdmac_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr,
+ size_t buf_len, size_t period_len,
+ enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ struct at_xdmac_desc *first = NULL, *prev = NULL;
+ unsigned int periods = buf_len / period_len;
+ int i;
+ u32 cfg;
+
+ dev_dbg(chan2dev(chan), "%s: buf_addr=%pad, buf_len=%zd, period_len=%zd, dir=%s, flags=0x%lx\n",
+ __func__, &buf_addr, buf_len, period_len,
+ direction == DMA_MEM_TO_DEV ? "mem2per" : "per2mem", flags);
+
+ if (!is_slave_direction(direction)) {
+ dev_err(chan2dev(chan), "invalid DMA direction\n");
+ return NULL;
+ }
+
+ if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
+ dev_err(chan2dev(chan), "channel currently used\n");
+ return NULL;
+ }
+
+ for (i = 0; i < periods; i++) {
+ struct at_xdmac_desc *desc = NULL;
+
+ spin_lock_bh(&atchan->lock);
+ desc = at_xdmac_get_desc(atchan);
+ if (!desc) {
+ dev_err(chan2dev(chan), "can't get descriptor\n");
+ if (first)
+ list_splice_init(&first->descs_list, &atchan->free_descs_list);
+ spin_unlock_bh(&atchan->lock);
+ return NULL;
+ }
+ spin_unlock_bh(&atchan->lock);
+ dev_dbg(chan2dev(chan),
+ "%s: desc=0x%p, tx_dma_desc.phys=%pad\n",
+ __func__, desc, &desc->tx_dma_desc.phys);
+
+ if (direction == DMA_DEV_TO_MEM) {
+ desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_da = buf_addr + i * period_len;
+ cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
+ } else {
+ desc->lld.mbr_sa = buf_addr + i * period_len;
+ desc->lld.mbr_da = atchan->per_dst_addr;
+ cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ }
+ desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1
+ | AT_XDMAC_MBR_UBC_NDEN
+ | AT_XDMAC_MBR_UBC_NSEN
+ | AT_XDMAC_MBR_UBC_NDE
+ | period_len >> at_xdmac_get_dwidth(cfg);
+
+ dev_dbg(chan2dev(chan),
+ "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n",
+ __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc);
+
+ /* Chain lld. */
+ if (prev) {
+ prev->lld.mbr_nda = desc->tx_dma_desc.phys;
+ dev_dbg(chan2dev(chan),
+ "%s: chain lld: prev=0x%p, mbr_nda=%pad\n",
+ __func__, prev, &prev->lld.mbr_nda);
+ }
+
+ prev = desc;
+ if (!first)
+ first = desc;
+
+ dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n",
+ __func__, desc, first);
+ list_add_tail(&desc->desc_node, &first->descs_list);
+ }
+
+ prev->lld.mbr_nda = first->tx_dma_desc.phys;
+ dev_dbg(chan2dev(chan),
+ "%s: chain lld: prev=0x%p, mbr_nda=%pad\n",
+ __func__, prev, &prev->lld.mbr_nda);
+ first->tx_dma_desc.flags = flags;
+ first->xfer_size = buf_len;
+ first->direction = direction;
+
+ return &first->tx_dma_desc;
+}
+
+static struct dma_async_tx_descriptor *
+at_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ struct at_xdmac_desc *first = NULL, *prev = NULL;
+ size_t remaining_size = len, xfer_size = 0, ublen;
+ dma_addr_t src_addr = src, dst_addr = dest;
+ u32 dwidth;
+ /*
+ * WARNING: We don't know the direction, it involves we can't
+ * dynamically set the source and dest interface so we have to use the
+ * same one. Only interface 0 allows EBI access. Hopefully we can
+ * access DDR through both ports (at least on SAMA5D4x), so we can use
+ * the same interface for source and dest, that solves the fact we
+ * don't know the direction.
+ */
+ u32 chan_cc = AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+ | AT_XDMAC_CC_DIF(0)
+ | AT_XDMAC_CC_SIF(0)
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_MEM_TRAN;
+
+ dev_dbg(chan2dev(chan), "%s: src=%pad, dest=%pad, len=%zd, flags=0x%lx\n",
+ __func__, &src, &dest, len, flags);
+
+ if (unlikely(!len))
+ return NULL;
+
+ /*
+ * Check address alignment to select the greater data width we can use.
+ * Some XDMAC implementations don't provide dword transfer, in this
+ * case selecting dword has the same behavior as selecting word transfers.
+ */
+ if (!((src_addr | dst_addr) & 7)) {
+ dwidth = AT_XDMAC_CC_DWIDTH_DWORD;
+ dev_dbg(chan2dev(chan), "%s: dwidth: double word\n", __func__);
+ } else if (!((src_addr | dst_addr) & 3)) {
+ dwidth = AT_XDMAC_CC_DWIDTH_WORD;
+ dev_dbg(chan2dev(chan), "%s: dwidth: word\n", __func__);
+ } else if (!((src_addr | dst_addr) & 1)) {
+ dwidth = AT_XDMAC_CC_DWIDTH_HALFWORD;
+ dev_dbg(chan2dev(chan), "%s: dwidth: half word\n", __func__);
+ } else {
+ dwidth = AT_XDMAC_CC_DWIDTH_BYTE;
+ dev_dbg(chan2dev(chan), "%s: dwidth: byte\n", __func__);
+ }
+
+ /* Prepare descriptors. */
+ while (remaining_size) {
+ struct at_xdmac_desc *desc = NULL;
+
+ dev_dbg(chan2dev(chan), "%s: remaining_size=%zu\n", __func__, remaining_size);
+
+ spin_lock_bh(&atchan->lock);
+ desc = at_xdmac_get_desc(atchan);
+ spin_unlock_bh(&atchan->lock);
+ if (!desc) {
+ dev_err(chan2dev(chan), "can't get descriptor\n");
+ if (first)
+ list_splice_init(&first->descs_list, &atchan->free_descs_list);
+ return NULL;
+ }
+
+ /* Update src and dest addresses. */
+ src_addr += xfer_size;
+ dst_addr += xfer_size;
+
+ if (remaining_size >= AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth)
+ xfer_size = AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth;
+ else
+ xfer_size = remaining_size;
+
+ dev_dbg(chan2dev(chan), "%s: xfer_size=%zu\n", __func__, xfer_size);
+
+ /* Check remaining length and change data width if needed. */
+ if (!((src_addr | dst_addr | xfer_size) & 7)) {
+ dwidth = AT_XDMAC_CC_DWIDTH_DWORD;
+ dev_dbg(chan2dev(chan), "%s: dwidth: double word\n", __func__);
+ } else if (!((src_addr | dst_addr | xfer_size) & 3)) {
+ dwidth = AT_XDMAC_CC_DWIDTH_WORD;
+ dev_dbg(chan2dev(chan), "%s: dwidth: word\n", __func__);
+ } else if (!((src_addr | dst_addr | xfer_size) & 1)) {
+ dwidth = AT_XDMAC_CC_DWIDTH_HALFWORD;
+ dev_dbg(chan2dev(chan), "%s: dwidth: half word\n", __func__);
+ } else if ((src_addr | dst_addr | xfer_size) & 1) {
+ dwidth = AT_XDMAC_CC_DWIDTH_BYTE;
+ dev_dbg(chan2dev(chan), "%s: dwidth: byte\n", __func__);
+ }
+ chan_cc |= AT_XDMAC_CC_DWIDTH(dwidth);
+
+ ublen = xfer_size >> dwidth;
+ remaining_size -= xfer_size;
+
+ desc->lld.mbr_sa = src_addr;
+ desc->lld.mbr_da = dst_addr;
+ desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV2
+ | AT_XDMAC_MBR_UBC_NDEN
+ | AT_XDMAC_MBR_UBC_NSEN
+ | (remaining_size ? AT_XDMAC_MBR_UBC_NDE : 0)
+ | ublen;
+ desc->lld.mbr_cfg = chan_cc;
+
+ dev_dbg(chan2dev(chan),
+ "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
+ __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc, desc->lld.mbr_cfg);
+
+ /* Chain lld. */
+ if (prev) {
+ prev->lld.mbr_nda = desc->tx_dma_desc.phys;
+ dev_dbg(chan2dev(chan),
+ "%s: chain lld: prev=0x%p, mbr_nda=0x%08x\n",
+ __func__, prev, prev->lld.mbr_nda);
+ }
+
+ prev = desc;
+ if (!first)
+ first = desc;
+
+ dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n",
+ __func__, desc, first);
+ list_add_tail(&desc->desc_node, &first->descs_list);
+ }
+
+ first->tx_dma_desc.flags = flags;
+ first->xfer_size = len;
+
+ return &first->tx_dma_desc;
+}
+
+static enum dma_status
+at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ struct at_xdmac_desc *desc, *_desc;
+ struct list_head *descs_list;
+ enum dma_status ret;
+ int residue;
+ u32 cur_nda, mask, value;
+ u8 dwidth = at_xdmac_get_dwidth(atchan->cfg[AT_XDMAC_CUR_CFG]);
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ if (!txstate)
+ return ret;
+
+ spin_lock_bh(&atchan->lock);
+
+ desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, xfer_node);
+
+ /*
+ * If the transfer has not been started yet, don't need to compute the
+ * residue, it's the transfer length.
+ */
+ if (!desc->active_xfer) {
+ dma_set_residue(txstate, desc->xfer_size);
+ spin_unlock_bh(&atchan->lock);
+ return ret;
+ }
+
+ residue = desc->xfer_size;
+ /*
+ * Flush FIFO: only relevant when the transfer is source peripheral
+ * synchronized.
+ */
+ mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC;
+ value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM;
+ if ((atchan->cfg[AT_XDMAC_CUR_CFG] & mask) == value) {
+ at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask);
+ while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS))
+ cpu_relax();
+ }
+
+ cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc;
+ /*
+ * Remove size of all microblocks already transferred and the current
+ * one. Then add the remaining size to transfer of the current
+ * microblock.
+ */
+ descs_list = &desc->descs_list;
+ list_for_each_entry_safe(desc, _desc, descs_list, desc_node) {
+ residue -= (desc->lld.mbr_ubc & 0xffffff) << dwidth;
+ if ((desc->lld.mbr_nda & 0xfffffffc) == cur_nda)
+ break;
+ }
+ residue += at_xdmac_chan_read(atchan, AT_XDMAC_CUBC) << dwidth;
+
+ spin_unlock_bh(&atchan->lock);
+
+ dma_set_residue(txstate, residue);
+
+ dev_dbg(chan2dev(chan),
+ "%s: desc=0x%p, tx_dma_desc.phys=%pad, tx_status=%d, cookie=%d, residue=%d\n",
+ __func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);
+
+ return ret;
+}
+
+/* Call must be protected by lock. */
+static void at_xdmac_remove_xfer(struct at_xdmac_chan *atchan,
+ struct at_xdmac_desc *desc)
+{
+ dev_dbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
+
+ /*
+ * Remove the transfer from the transfer list then move the transfer
+ * descriptors into the free descriptors list.
+ */
+ list_del(&desc->xfer_node);
+ list_splice_init(&desc->descs_list, &atchan->free_descs_list);
+}
+
+static void at_xdmac_advance_work(struct at_xdmac_chan *atchan)
+{
+ struct at_xdmac_desc *desc;
+
+ spin_lock_bh(&atchan->lock);
+
+ /*
+ * If channel is enabled, do nothing, advance_work will be triggered
+ * after the interruption.
+ */
+ if (!at_xdmac_chan_is_enabled(atchan) && !list_empty(&atchan->xfers_list)) {
+ desc = list_first_entry(&atchan->xfers_list,
+ struct at_xdmac_desc,
+ xfer_node);
+ dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
+ if (!desc->active_xfer)
+ at_xdmac_start_xfer(atchan, desc);
+ }
+
+ spin_unlock_bh(&atchan->lock);
+}
+
+static void at_xdmac_handle_cyclic(struct at_xdmac_chan *atchan)
+{
+ struct at_xdmac_desc *desc;
+ struct dma_async_tx_descriptor *txd;
+
+ desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, xfer_node);
+ txd = &desc->tx_dma_desc;
+
+ if (txd->callback && (txd->flags & DMA_PREP_INTERRUPT))
+ txd->callback(txd->callback_param);
+}
+
+static void at_xdmac_tasklet(unsigned long data)
+{
+ struct at_xdmac_chan *atchan = (struct at_xdmac_chan *)data;
+ struct at_xdmac_desc *desc;
+ u32 error_mask;
+
+ dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
+ __func__, atchan->status);
+
+ error_mask = AT_XDMAC_CIS_RBEIS
+ | AT_XDMAC_CIS_WBEIS
+ | AT_XDMAC_CIS_ROIS;
+
+ if (at_xdmac_chan_is_cyclic(atchan)) {
+ at_xdmac_handle_cyclic(atchan);
+ } else if ((atchan->status & AT_XDMAC_CIS_LIS)
+ || (atchan->status & error_mask)) {
+ struct dma_async_tx_descriptor *txd;
+
+ if (atchan->status & AT_XDMAC_CIS_RBEIS)
+ dev_err(chan2dev(&atchan->chan), "read bus error!!!");
+ if (atchan->status & AT_XDMAC_CIS_WBEIS)
+ dev_err(chan2dev(&atchan->chan), "write bus error!!!");
+ if (atchan->status & AT_XDMAC_CIS_ROIS)
+ dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
+
+ spin_lock_bh(&atchan->lock);
+ desc = list_first_entry(&atchan->xfers_list,
+ struct at_xdmac_desc,
+ xfer_node);
+ dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
+ BUG_ON(!desc->active_xfer);
+
+ txd = &desc->tx_dma_desc;
+
+ at_xdmac_remove_xfer(atchan, desc);
+ spin_unlock_bh(&atchan->lock);
+
+ if (!at_xdmac_chan_is_cyclic(atchan)) {
+ dma_cookie_complete(txd);
+ if (txd->callback && (txd->flags & DMA_PREP_INTERRUPT))
+ txd->callback(txd->callback_param);
+ }
+
+ dma_run_dependencies(txd);
+
+ at_xdmac_advance_work(atchan);
+ }
+}
+
+static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
+{
+ struct at_xdmac *atxdmac = (struct at_xdmac *)dev_id;
+ struct at_xdmac_chan *atchan;
+ u32 imr, status, pending;
+ u32 chan_imr, chan_status;
+ int i, ret = IRQ_NONE;
+
+ do {
+ imr = at_xdmac_read(atxdmac, AT_XDMAC_GIM);
+ status = at_xdmac_read(atxdmac, AT_XDMAC_GIS);
+ pending = status & imr;
+
+ dev_vdbg(atxdmac->dma.dev,
+ "%s: status=0x%08x, imr=0x%08x, pending=0x%08x\n",
+ __func__, status, imr, pending);
+
+ if (!pending)
+ break;
+
+ /* We have to find which channel has generated the interrupt. */
+ for (i = 0; i < atxdmac->dma.chancnt; i++) {
+ if (!((1 << i) & pending))
+ continue;
+
+ atchan = &atxdmac->chan[i];
+ chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
+ chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
+ atchan->status = chan_status & chan_imr;
+ dev_vdbg(atxdmac->dma.dev,
+ "%s: chan%d: imr=0x%x, status=0x%x\n",
+ __func__, i, chan_imr, chan_status);
+ dev_vdbg(chan2dev(&atchan->chan),
+ "%s: CC=0x%08x CNDA=0x%08x, CNDC=0x%08x, CSA=0x%08x, CDA=0x%08x, CUBC=0x%08x\n",
+ __func__,
+ at_xdmac_chan_read(atchan, AT_XDMAC_CC),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CNDA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CNDC),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CSA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
+ at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
+
+ if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+ at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
+
+ tasklet_schedule(&atchan->tasklet);
+ ret = IRQ_HANDLED;
+ }
+
+ } while (pending);
+
+ return ret;
+}
+
+static void at_xdmac_issue_pending(struct dma_chan *chan)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+
+ dev_dbg(chan2dev(&atchan->chan), "%s\n", __func__);
+
+ if (!at_xdmac_chan_is_cyclic(atchan))
+ at_xdmac_advance_work(atchan);
+
+ return;
+}
+
+static int at_xdmac_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct at_xdmac_desc *desc, *_desc;
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ int ret = 0;
+
+ dev_dbg(chan2dev(chan), "%s: cmd=%d\n", __func__, cmd);
+
+ spin_lock_bh(&atchan->lock);
+
+ switch (cmd) {
+ case DMA_PAUSE:
+ at_xdmac_write(atxdmac, AT_XDMAC_GRWS, atchan->mask);
+ set_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
+ break;
+
+ case DMA_RESUME:
+ if (!at_xdmac_chan_is_paused(atchan))
+ break;
+
+ at_xdmac_write(atxdmac, AT_XDMAC_GRWR, atchan->mask);
+ clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
+ break;
+
+ case DMA_TERMINATE_ALL:
+ at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
+ while (at_xdmac_read(atxdmac, AT_XDMAC_GS) & atchan->mask)
+ cpu_relax();
+
+ /* Cancel all pending transfers. */
+ list_for_each_entry_safe(desc, _desc, &atchan->xfers_list, xfer_node)
+ at_xdmac_remove_xfer(atchan, desc);
+
+ clear_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status);
+ break;
+
+ case DMA_SLAVE_CONFIG:
+ ret = at_xdmac_set_slave_config(chan,
+ (struct dma_slave_config *)arg);
+ break;
+
+ default:
+ dev_err(chan2dev(chan),
+ "unmanaged or unknown dma control cmd: %d\n", cmd);
+ ret = -ENXIO;
+ }
+
+ spin_unlock_bh(&atchan->lock);
+
+ return ret;
+}
+
+static int at_xdmac_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ struct at_xdmac_desc *desc;
+ int i;
+
+ spin_lock_bh(&atchan->lock);
+
+ if (at_xdmac_chan_is_enabled(atchan)) {
+ dev_err(chan2dev(chan),
+ "can't allocate channel resources (channel enabled)\n");
+ i = -EIO;
+ goto spin_unlock;
+ }
+
+ if (!list_empty(&atchan->free_descs_list)) {
+ dev_err(chan2dev(chan),
+ "can't allocate channel resources (channel not free from a previous use)\n");
+ i = -EIO;
+ goto spin_unlock;
+ }
+
+ for (i = 0; i < init_nr_desc_per_channel; i++) {
+ desc = at_xdmac_alloc_desc(chan, GFP_ATOMIC);
+ if (!desc) {
+ dev_warn(chan2dev(chan),
+ "only %d descriptors have been allocated\n", i);
+ break;
+ }
+ list_add_tail(&desc->desc_node, &atchan->free_descs_list);
+ }
+
+ dma_cookie_init(chan);
+
+ dev_dbg(chan2dev(chan), "%s: allocated %d descriptors\n", __func__, i);
+
+spin_unlock:
+ spin_unlock_bh(&atchan->lock);
+ return i;
+}
+
+static void at_xdmac_free_chan_resources(struct dma_chan *chan)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ struct at_xdmac *atxdmac = to_at_xdmac(chan->device);
+ struct at_xdmac_desc *desc, *_desc;
+
+ list_for_each_entry_safe(desc, _desc, &atchan->free_descs_list, desc_node) {
+ dev_dbg(chan2dev(chan), "%s: freeing descriptor %p\n", __func__, desc);
+ list_del(&desc->desc_node);
+ dma_pool_free(atxdmac->at_xdmac_desc_pool, desc, desc->tx_dma_desc.phys);
+ }
+
+ return;
+}
+
+#define AT_XDMAC_DMA_BUSWIDTHS\
+ (BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) |\
+ BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |\
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |\
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |\
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES))
+
+static int at_xdmac_device_slave_caps(struct dma_chan *dchan,
+ struct dma_slave_caps *caps)
+{
+
+ caps->src_addr_widths = AT_XDMAC_DMA_BUSWIDTHS;
+ caps->dstn_addr_widths = AT_XDMAC_DMA_BUSWIDTHS;
+ caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ caps->cmd_pause = true;
+ caps->cmd_terminate = true;
+ caps->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_xdmac_prepare(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct at_xdmac *atxdmac = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
+
+ list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) {
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+
+ /* Wait for transfer completion, except in cyclic case. */
+ if (at_xdmac_chan_is_enabled(atchan) && !at_xdmac_chan_is_cyclic(atchan))
+ return -EAGAIN;
+ }
+ return 0;
+}
+#else
+# define atmel_xdmac_prepare NULL
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_xdmac_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct at_xdmac *atxdmac = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
+
+ list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) {
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+
+ if (at_xdmac_chan_is_cyclic(atchan)) {
+ if (!at_xdmac_chan_is_paused(atchan))
+ at_xdmac_control(chan, DMA_PAUSE, 0);
+ atchan->save_cim = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
+ atchan->save_cnda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA);
+ atchan->save_cndc = at_xdmac_chan_read(atchan, AT_XDMAC_CNDC);
+ }
+ }
+ atxdmac->save_gim = at_xdmac_read(atxdmac, AT_XDMAC_GIM);
+
+ at_xdmac_off(atxdmac);
+ clk_disable_unprepare(atxdmac->clk);
+ return 0;
+}
+
+static int atmel_xdmac_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct at_xdmac *atxdmac = platform_get_drvdata(pdev);
+ struct at_xdmac_chan *atchan;
+ struct dma_chan *chan, *_chan;
+ int i;
+ u32 cfg;
+
+ clk_prepare_enable(atxdmac->clk);
+
+ /* Clear pending interrupts. */
+ for (i = 0; i < atxdmac->dma.chancnt; i++) {
+ atchan = &atxdmac->chan[i];
+ while (at_xdmac_chan_read(atchan, AT_XDMAC_CIS))
+ cpu_relax();
+ }
+
+ at_xdmac_write(atxdmac, AT_XDMAC_GIE, atxdmac->save_gim);
+ at_xdmac_write(atxdmac, AT_XDMAC_GE, atxdmac->save_gs);
+ list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) {
+ atchan = to_at_xdmac_chan(chan);
+ cfg = atchan->cfg[AT_XDMAC_CUR_CFG];
+ at_xdmac_chan_write(atchan, AT_XDMAC_CC, cfg);
+ if (at_xdmac_chan_is_cyclic(atchan)) {
+ at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, atchan->save_cnda);
+ at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, atchan->save_cndc);
+ at_xdmac_chan_write(atchan, AT_XDMAC_CIE, atchan->save_cim);
+ wmb();
+ at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask);
+ }
+ }
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int at_xdmac_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct at_xdmac *atxdmac;
+ int irq, size, nr_channels, i, ret;
+ void __iomem *base;
+ u32 reg;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ /*
+ * Read number of xdmac channels, read helper function can't be used
+ * since atxdmac is not yet allocated and we need to know the number
+ * of channels to do the allocation.
+ */
+ reg = readl_relaxed(base + AT_XDMAC_GTYPE);
+ nr_channels = AT_XDMAC_NB_CH(reg);
+ if (nr_channels > AT_XDMAC_MAX_CHAN) {
+ dev_err(&pdev->dev, "invalid number of channels (%u)\n",
+ nr_channels);
+ return -EINVAL;
+ }
+
+ size = sizeof(*atxdmac);
+ size += nr_channels * sizeof(struct at_xdmac_chan);
+ atxdmac = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!atxdmac) {
+ dev_err(&pdev->dev, "can't allocate at_xdmac structure\n");
+ return -ENOMEM;
+ }
+
+ atxdmac->regs = base;
+ atxdmac->irq = irq;
+
+ atxdmac->clk = devm_clk_get(&pdev->dev, "dma_clk");
+ if (IS_ERR(atxdmac->clk)) {
+ dev_err(&pdev->dev, "can't get dma_clk\n");
+ return PTR_ERR(atxdmac->clk);
+ }
+
+ /* Do not use dev res to prevent races with tasklet */
+ ret = request_irq(atxdmac->irq, at_xdmac_interrupt, 0, "at_xdmac", atxdmac);
+ if (ret) {
+ dev_err(&pdev->dev, "can't request irq\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(atxdmac->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "can't prepare or enable clock\n");
+ goto err_free_irq;
+ }
+
+ atxdmac->at_xdmac_desc_pool =
+ dmam_pool_create(dev_name(&pdev->dev), &pdev->dev,
+ sizeof(struct at_xdmac_desc), 4, 0);
+ if (!atxdmac->at_xdmac_desc_pool) {
+ dev_err(&pdev->dev, "no memory for descriptors dma pool\n");
+ ret = -ENOMEM;
+ goto err_clk_disable;
+ }
+
+ dma_cap_set(DMA_CYCLIC, atxdmac->dma.cap_mask);
+ dma_cap_set(DMA_MEMCPY, atxdmac->dma.cap_mask);
+ dma_cap_set(DMA_SLAVE, atxdmac->dma.cap_mask);
+ /*
+ * Without DMA_PRIVATE the driver is not able to allocate more than
+ * one channel, second allocation fails in private_candidate.
+ */
+ dma_cap_set(DMA_PRIVATE, atxdmac->dma.cap_mask);
+ atxdmac->dma.dev = &pdev->dev;
+ atxdmac->dma.device_alloc_chan_resources = at_xdmac_alloc_chan_resources;
+ atxdmac->dma.device_free_chan_resources = at_xdmac_free_chan_resources;
+ atxdmac->dma.device_tx_status = at_xdmac_tx_status;
+ atxdmac->dma.device_issue_pending = at_xdmac_issue_pending;
+ atxdmac->dma.device_prep_dma_cyclic = at_xdmac_prep_dma_cyclic;
+ atxdmac->dma.device_prep_dma_memcpy = at_xdmac_prep_dma_memcpy;
+ atxdmac->dma.device_prep_slave_sg = at_xdmac_prep_slave_sg;
+ atxdmac->dma.device_control = at_xdmac_control;
+ atxdmac->dma.device_slave_caps = at_xdmac_device_slave_caps;
+
+ /* Disable all chans and interrupts. */
+ at_xdmac_off(atxdmac);
+
+ /* Init channels. */
+ INIT_LIST_HEAD(&atxdmac->dma.channels);
+ for (i = 0; i < nr_channels; i++) {
+ struct at_xdmac_chan *atchan = &atxdmac->chan[i];
+
+ atchan->chan.device = &atxdmac->dma;
+ list_add_tail(&atchan->chan.device_node,
+ &atxdmac->dma.channels);
+
+ atchan->ch_regs = at_xdmac_chan_reg_base(atxdmac, i);
+ atchan->mask = 1 << i;
+
+ spin_lock_init(&atchan->lock);
+ INIT_LIST_HEAD(&atchan->xfers_list);
+ INIT_LIST_HEAD(&atchan->free_descs_list);
+ tasklet_init(&atchan->tasklet, at_xdmac_tasklet,
+ (unsigned long)atchan);
+
+ /* Clear pending interrupts. */
+ while (at_xdmac_chan_read(atchan, AT_XDMAC_CIS))
+ cpu_relax();
+ }
+ platform_set_drvdata(pdev, atxdmac);
+
+ ret = dma_async_device_register(&atxdmac->dma);
+ if (ret) {
+ dev_err(&pdev->dev, "fail to register DMA engine device\n");
+ goto err_clk_disable;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ at_xdmac_xlate, atxdmac);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register of dma controller\n");
+ goto err_dma_unregister;
+ }
+
+ dev_info(&pdev->dev, "%d channels, mapped at 0x%p\n",
+ nr_channels, atxdmac->regs);
+
+ return 0;
+
+err_dma_unregister:
+ dma_async_device_unregister(&atxdmac->dma);
+err_clk_disable:
+ clk_disable_unprepare(atxdmac->clk);
+err_free_irq:
+ free_irq(atxdmac->irq, atxdmac->dma.dev);
+ return ret;
+}
+
+static int at_xdmac_remove(struct platform_device *pdev)
+{
+ struct at_xdmac *atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
+ int i;
+
+ at_xdmac_off(atxdmac);
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&atxdmac->dma);
+ clk_disable_unprepare(atxdmac->clk);
+
+ synchronize_irq(atxdmac->irq);
+
+ free_irq(atxdmac->irq, atxdmac->dma.dev);
+
+ for (i = 0; i < atxdmac->dma.chancnt; i++) {
+ struct at_xdmac_chan *atchan = &atxdmac->chan[i];
+
+ tasklet_kill(&atchan->tasklet);
+ at_xdmac_free_chan_resources(&atchan->chan);
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops atmel_xdmac_dev_pm_ops = {
+ .prepare = atmel_xdmac_prepare,
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(atmel_xdmac_suspend, atmel_xdmac_resume)
+};
+
+static const struct of_device_id atmel_xdmac_dt_ids[] = {
+ {
+ .compatible = "atmel,sama5d4-dma",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, atmel_xdmac_dt_ids);
+
+static struct platform_driver at_xdmac_driver = {
+ .probe = at_xdmac_probe,
+ .remove = at_xdmac_remove,
+ .driver = {
+ .name = "at_xdmac",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_xdmac_dt_ids),
+ .pm = &atmel_xdmac_dev_pm_ops,
+ }
+};
+
+static int __init at_xdmac_init(void)
+{
+ return platform_driver_probe(&at_xdmac_driver, at_xdmac_probe);
+}
+subsys_initcall(at_xdmac_init);
+
+MODULE_DESCRIPTION("Atmel Extended DMA Controller driver");
+MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 123f578..4cfaaa5 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1107,52 +1107,14 @@
}
EXPORT_SYMBOL(edma_filter_fn);
-static struct platform_device *pdev0, *pdev1;
-
-static const struct platform_device_info edma_dev_info0 = {
- .name = "edma-dma-engine",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-static const struct platform_device_info edma_dev_info1 = {
- .name = "edma-dma-engine",
- .id = 1,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
static int edma_init(void)
{
- int ret = platform_driver_register(&edma_driver);
-
- if (ret == 0) {
- pdev0 = platform_device_register_full(&edma_dev_info0);
- if (IS_ERR(pdev0)) {
- platform_driver_unregister(&edma_driver);
- ret = PTR_ERR(pdev0);
- goto out;
- }
- }
-
- if (!of_have_populated_dt() && EDMA_CTLRS == 2) {
- pdev1 = platform_device_register_full(&edma_dev_info1);
- if (IS_ERR(pdev1)) {
- platform_driver_unregister(&edma_driver);
- platform_device_unregister(pdev0);
- ret = PTR_ERR(pdev1);
- }
- }
-
-out:
- return ret;
+ return platform_driver_register(&edma_driver);
}
subsys_initcall(edma_init);
static void __exit edma_exit(void)
{
- platform_device_unregister(pdev0);
- if (pdev1)
- platform_device_unregister(pdev1);
platform_driver_unregister(&edma_driver);
}
module_exit(edma_exit);
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 65ef966..899bede 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -12,11 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
* ------------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 8b10f88..580dbf0 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -12,11 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3437009..270d84b 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -14,11 +14,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
- *
* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
* Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
* <mbailey@littlefeet-inc.com>
diff --git a/drivers/i2c/algos/i2c-algo-pcf.h b/drivers/i2c/algos/i2c-algo-pcf.h
index 1ec703e..262ee80 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.h
+++ b/drivers/i2c/algos/i2c-algo-pcf.h
@@ -12,12 +12,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* -------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl> */
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 451e305..4f2d788 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 2fa21ce..45c5c48 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 41fc683..65e32405 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index a16f728..6c7113d 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 917d545..e05a672 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -434,7 +434,7 @@
}
}
- ret = wait_for_completion_io_timeout(&dev->cmd_complete,
+ ret = wait_for_completion_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 8762458..6f8c075 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -21,10 +21,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/delay.h>
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index f3b89a4..5bdbc71 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -23,10 +23,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 4d96147..d15b7c9 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -17,10 +17,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 3c20e4bd..edca99d 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index d66b6cb..5a410ef 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index d31d313..acb40f9 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -19,10 +19,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index a743115..373dd4d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index a44ea13..76e699f 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 4854970..92e8c0c 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -12,11 +12,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 14d2b76..b7864cf 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 7cfc183..6ab4f1c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index c48e46a..e9fb7cf 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -11,11 +11,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
- *
* Author:
* Darius Augulis, Teltonika Inc.
*
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
index 097e270..2d6929c 100644
--- a/drivers/i2c/busses/i2c-iop3xx.h
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -11,11 +11,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index cf99dbf..113293d 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -14,10 +14,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 3f6ecbf..f2b0ff0 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -14,10 +14,6 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index b170bdf..88eda09 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index ee3a76c..70b3c91 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -17,10 +17,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0dffb0e..26942c1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -22,10 +22,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 62f55fe..d1f625f9 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -18,10 +18,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a27aae2..a1fac5a 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -18,10 +18,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index e572f3a..4e12945 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#define PORT_DATA 0
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index 7a9dce4..df1dbc9 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 323f061..e0eb4ca 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index a6f54ba..67cbec6 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -11,10 +11,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 8564768..177834e 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -18,10 +18,6 @@
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 01e9677..60a53c1 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -14,10 +14,6 @@
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e3b0337..6524477 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 8b5e79c..4855188 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 0fe505d..2b6219d 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
index 964e5c6..15ac839 100644
--- a/drivers/i2c/busses/i2c-simtec.c
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index ac9bc33..7d58a40 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -11,10 +11,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Note: we assume there can only be one SIS5595 with one SMBus interface */
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index c636673..1e6805b 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -10,10 +10,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 8dc2fc5..44b9044 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -10,10 +10,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 10855a0..4c7fc2d 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index f4a1ed7..59b1d23 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 6841200..0ee2646 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -13,10 +13,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index ade9223..cc65ea0 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -12,10 +12,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
*
* This code was implemented by Mocean Laboratories AB when porting linux
* to the automotive development board Russellville. The copyright holder
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ff3f574..5153354 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -17,10 +17,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c
index f24cc64..90e3229 100644
--- a/drivers/i2c/i2c-boardinfo.c
+++ b/drivers/i2c/i2c-boardinfo.c
@@ -10,11 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 2f90ac6..f43b4e1 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -10,12 +10,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
@@ -670,6 +665,9 @@
status = driver->remove(client);
}
+ if (dev->of_node)
+ irq_dispose_mapping(client->irq);
+
dev_pm_domain_detach(&client->dev, true);
return status;
}
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 18a8fd2..17700bf 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -10,11 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/rwsem.h>
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 80b47e8..71c7a39 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -14,11 +14,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
*/
/* Note that this is a complete rewrite of Simon Vogl's i2c-dev module.
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index fc99f0d..9ebf9cb 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -13,11 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c
index d241aa2..af2a94e 100644
--- a/drivers/i2c/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -13,10 +13,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define DEBUG 1
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 98909a9..a23e58c 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -894,7 +894,7 @@
static const struct iio_event_spec kxcjk1013_event = {
.type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
+ .dir = IIO_EV_DIR_EITHER,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE) |
BIT(IIO_EV_INFO_PERIOD)
diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
index a15006e..0763b86 100644
--- a/drivers/iio/light/tsl4531.c
+++ b/drivers/iio/light/tsl4531.c
@@ -230,9 +230,12 @@
return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
TSL4531_MODE_NORMAL);
}
-#endif
static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume);
+#define TSL4531_PM_OPS (&tsl4531_pm_ops)
+#else
+#define TSL4531_PM_OPS NULL
+#endif
static const struct i2c_device_id tsl4531_id[] = {
{ "tsl4531", 0 },
@@ -243,7 +246,7 @@
static struct i2c_driver tsl4531_driver = {
.driver = {
.name = TSL4531_DRV_NAME,
- .pm = &tsl4531_pm_ops,
+ .pm = TSL4531_PM_OPS,
.owner = THIS_MODULE,
},
.probe = tsl4531_probe,
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index 5e780ef..8349cc0 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -330,7 +330,7 @@
return -EINVAL;
}
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(st));
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index 3e238cd..6a2e168 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -43,6 +43,7 @@
#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4)
#define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF
+#define ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << cpuid)
#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
#define ARMADA_375_PPI_CAUSE (0x10)
@@ -406,19 +407,29 @@
struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
- unsigned long irqmap, irqn;
+ unsigned long irqmap, irqn, irqsrc, cpuid;
unsigned int cascade_irq;
chained_irq_enter(chip, desc);
irqmap = readl_relaxed(per_cpu_int_base + ARMADA_375_PPI_CAUSE);
-
- if (irqmap & BIT(0)) {
- armada_370_xp_handle_msi_irq(NULL, true);
- irqmap &= ~BIT(0);
- }
+ cpuid = cpu_logical_map(smp_processor_id());
for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
+ irqsrc = readl_relaxed(main_int_base +
+ ARMADA_370_XP_INT_SOURCE_CTL(irqn));
+
+ /* Check if the interrupt is not masked on current CPU.
+ * Test IRQ (0-1) and FIQ (8-9) mask bits.
+ */
+ if (!(irqsrc & ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid)))
+ continue;
+
+ if (irqn == 1) {
+ armada_370_xp_handle_msi_irq(NULL, true);
+ continue;
+ }
+
cascade_irq = irq_find_mapping(armada_370_xp_mpic_domain, irqn);
generic_handle_irq(cascade_irq);
}
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 38493ff..7f9be07 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -1041,6 +1041,8 @@
return 0;
}
IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init);
+IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init);
+IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index b8579ee..2cf3057 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -962,6 +962,11 @@
case SYS_ATSC:
c->modulation = VSB_8;
break;
+ case SYS_ISDBS:
+ c->symbol_rate = 28860000;
+ c->rolloff = ROLLOFF_35;
+ c->bandwidth_hz = c->symbol_rate / 100 * 135;
+ break;
default:
c->modulation = QAM_AUTO;
break;
@@ -2072,6 +2077,7 @@
break;
case SYS_DVBS:
case SYS_TURBO:
+ case SYS_ISDBS:
rolloff = 135;
break;
case SYS_DVBS2:
diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c
index 335daef..9d0d034 100644
--- a/drivers/media/dvb-frontends/ds3000.c
+++ b/drivers/media/dvb-frontends/ds3000.c
@@ -864,6 +864,13 @@
memcpy(&state->frontend.ops, &ds3000_ops,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
+
+ /*
+ * Some devices like T480 starts with voltage on. Be sure
+ * to turn voltage off during init, as this can otherwise
+ * interfere with Unicable SCR systems.
+ */
+ ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF);
return &state->frontend;
error3:
diff --git a/drivers/media/dvb-frontends/sp2.c b/drivers/media/dvb-frontends/sp2.c
index 9b684d5..15bf431 100644
--- a/drivers/media/dvb-frontends/sp2.c
+++ b/drivers/media/dvb-frontends/sp2.c
@@ -266,7 +266,7 @@
return s->status;
}
-int sp2_init(struct sp2 *s)
+static int sp2_init(struct sp2 *s)
{
int ret = 0;
u8 buf;
@@ -348,7 +348,7 @@
return ret;
}
-int sp2_exit(struct i2c_client *client)
+static int sp2_exit(struct i2c_client *client)
{
struct sp2 *s;
diff --git a/drivers/media/dvb-frontends/tc90522.c b/drivers/media/dvb-frontends/tc90522.c
index d9905fb..b35d65c 100644
--- a/drivers/media/dvb-frontends/tc90522.c
+++ b/drivers/media/dvb-frontends/tc90522.c
@@ -216,32 +216,30 @@
c->delivery_system = SYS_ISDBS;
layers = 0;
- ret = reg_read(state, 0xe8, val, 3);
+ ret = reg_read(state, 0xe6, val, 5);
if (ret == 0) {
- int slots;
u8 v;
+ c->stream_id = val[0] << 8 | val[1];
+
/* high/single layer */
- v = (val[0] & 0x70) >> 4;
+ v = (val[2] & 0x70) >> 4;
c->modulation = (v == 7) ? PSK_8 : QPSK;
c->fec_inner = fec_conv_sat[v];
c->layer[0].fec = c->fec_inner;
c->layer[0].modulation = c->modulation;
- c->layer[0].segment_count = val[1] & 0x3f; /* slots */
+ c->layer[0].segment_count = val[3] & 0x3f; /* slots */
/* low layer */
- v = (val[0] & 0x07);
+ v = (val[2] & 0x07);
c->layer[1].fec = fec_conv_sat[v];
if (v == 0) /* no low layer */
c->layer[1].segment_count = 0;
else
- c->layer[1].segment_count = val[2] & 0x3f; /* slots */
+ c->layer[1].segment_count = val[4] & 0x3f; /* slots */
/* actually, BPSK if v==1, but not defined in fe_modulation_t */
c->layer[1].modulation = QPSK;
layers = (v > 0) ? 2 : 1;
-
- slots = c->layer[0].segment_count + c->layer[1].segment_count;
- c->symbol_rate = 28860000 * slots / 48;
}
/* statistics */
@@ -363,7 +361,7 @@
u8 v;
c->isdbt_partial_reception = val[0] & 0x01;
- c->isdbt_sb_mode = (val[0] & 0xc0) == 0x01;
+ c->isdbt_sb_mode = (val[0] & 0xc0) == 0x40;
/* layer A */
v = (val[2] & 0x78) >> 3;
diff --git a/drivers/media/platform/vivid/vivid-core.c b/drivers/media/platform/vivid/vivid-core.c
index 2c61a62..686c3c2 100644
--- a/drivers/media/platform/vivid/vivid-core.c
+++ b/drivers/media/platform/vivid/vivid-core.c
@@ -100,11 +100,9 @@
"\t\t bit 0=crop, 1=compose, 2=scale,\n"
"\t\t -1=user-controlled (default)");
-static unsigned multiplanar[VIVID_MAX_DEVS];
+static unsigned multiplanar[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 1 };
module_param_array(multiplanar, uint, NULL, 0444);
-MODULE_PARM_DESC(multiplanar, " 0 (default) is alternating single and multiplanar devices,\n"
- "\t\t 1 is single planar devices,\n"
- "\t\t 2 is multiplanar devices");
+MODULE_PARM_DESC(multiplanar, " 1 (default) creates a single planar device, 2 creates a multiplanar device.");
/* Default: video + vbi-cap (raw and sliced) + radio rx + radio tx + sdr + vbi-out + vid-out */
static unsigned node_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0x1d3d };
@@ -669,10 +667,7 @@
/* start detecting feature set */
/* do we use single- or multi-planar? */
- if (multiplanar[inst] == 0)
- dev->multiplanar = inst & 1;
- else
- dev->multiplanar = multiplanar[inst] > 1;
+ dev->multiplanar = multiplanar[inst] > 1;
v4l2_info(&dev->v4l2_dev, "using %splanar format API\n",
dev->multiplanar ? "multi" : "single ");
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index b8837dd..65f80b8 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1678,7 +1678,8 @@
if (press_type == 0)
rc_keyup(ictx->rdev);
else {
- if (ictx->rc_type == RC_BIT_RC6_MCE)
+ if (ictx->rc_type == RC_BIT_RC6_MCE ||
+ ictx->rc_type == RC_BIT_OTHER)
rc_keydown(ictx->rdev,
ictx->rc_type == RC_BIT_RC6_MCE ? RC_TYPE_RC6_MCE : RC_TYPE_OTHER,
ictx->rc_scancode, ictx->rc_toggle);
diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c
index 08bbd4f..b0df629 100644
--- a/drivers/media/rc/ir-hix5hd2.c
+++ b/drivers/media/rc/ir-hix5hd2.c
@@ -297,7 +297,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int hix5hd2_ir_suspend(struct device *dev)
{
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index 2ef7639..84fa6e9 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -53,7 +53,7 @@
u32 scancode;
enum rc_type protocol;
- if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
+ if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ)))
return 0;
if (!is_timing_event(ev)) {
diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
index e8fff2a..b732ac6 100644
--- a/drivers/media/rc/rc-ir-raw.c
+++ b/drivers/media/rc/rc-ir-raw.c
@@ -262,7 +262,6 @@
return -ENOMEM;
dev->raw->dev = dev;
- dev->enabled_protocols = ~0;
dev->change_protocol = change_protocol;
rc = kfifo_alloc(&dev->raw->kfifo,
sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index a7991c7..8d3b74c 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1421,6 +1421,8 @@
if (dev->change_protocol) {
u64 rc_type = (1 << rc_map->rc_type);
+ if (dev->driver_type == RC_DRIVER_IR_RAW)
+ rc_type |= RC_BIT_LIRC;
rc = dev->change_protocol(dev, &rc_type);
if (rc < 0)
goto out_raw;
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 03c53b7..270d58a 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -311,7 +311,8 @@
struct device_node *np;
u32 bus_width;
int len, ret;
- bool cap_invert, gpio_invert;
+ bool cd_cap_invert, cd_gpio_invert = false;
+ bool ro_cap_invert, ro_gpio_invert = false;
if (!host->parent || !host->parent->of_node)
return 0;
@@ -359,16 +360,13 @@
if (of_find_property(np, "non-removable", &len)) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
- if (of_property_read_bool(np, "cd-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ cd_cap_invert = of_property_read_bool(np, "cd-inverted");
if (of_find_property(np, "broken-cd", &len))
host->caps |= MMC_CAP_NEEDS_POLL;
ret = mmc_gpiod_request_cd(host, "cd", 0, true,
- 0, &gpio_invert);
+ 0, &cd_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
return ret;
@@ -391,17 +389,14 @@
* both inverted, the end result is that the CD line is
* not inverted.
*/
- if (cap_invert ^ gpio_invert)
+ if (cd_cap_invert ^ cd_gpio_invert)
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
}
/* Parse Write Protection */
- if (of_property_read_bool(np, "wp-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ ro_cap_invert = of_property_read_bool(np, "wp-inverted");
- ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);
+ ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
goto out;
@@ -414,7 +409,7 @@
dev_info(host->parent, "Got WP GPIO\n");
/* See the comment on CD inversion above */
- if (cap_invert ^ gpio_invert)
+ if (ro_cap_invert ^ ro_gpio_invert)
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
if (of_find_property(np, "cap-sd-highspeed", &len))
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 2305dc0..3823edf 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1280,52 +1280,6 @@
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
- * of_property_read_string_index - Find and read a string from a multiple
- * strings property.
- * @np: device node from which the property value is to be read.
- * @propname: name of the property to be searched.
- * @index: index of the string in the list of strings
- * @out_string: pointer to null terminated return string, modified only if
- * return value is 0.
- *
- * Search for a property in a device tree node and retrieve a null
- * terminated string value (pointer to data, not a copy) in the list of strings
- * contained in that property.
- * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
- * property does not have a value, and -EILSEQ if the string is not
- * null-terminated within the length of the property data.
- *
- * The out_string pointer is modified only if a valid string can be decoded.
- */
-int of_property_read_string_index(struct device_node *np, const char *propname,
- int index, const char **output)
-{
- struct property *prop = of_find_property(np, propname, NULL);
- int i = 0;
- size_t l = 0, total = 0;
- const char *p;
-
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if (strnlen(prop->value, prop->length) >= prop->length)
- return -EILSEQ;
-
- p = prop->value;
-
- for (i = 0; total < prop->length; total += l, p += l) {
- l = strlen(p) + 1;
- if (i++ == index) {
- *output = p;
- return 0;
- }
- }
- return -ENODATA;
-}
-EXPORT_SYMBOL_GPL(of_property_read_string_index);
-
-/**
* of_property_match_string() - Find string in a list and return index
* @np: pointer to node containing string list property
* @propname: string list property name
@@ -1351,7 +1305,7 @@
end = p + prop->length;
for (i = 0; p < end; i++, p += l) {
- l = strlen(p) + 1;
+ l = strnlen(p, end - p) + 1;
if (p + l > end)
return -EILSEQ;
pr_debug("comparing %s with %s\n", string, p);
@@ -1363,39 +1317,41 @@
EXPORT_SYMBOL_GPL(of_property_match_string);
/**
- * of_property_count_strings - Find and return the number of strings from a
- * multiple strings property.
+ * of_property_read_string_util() - Utility helper for parsing string properties
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
+ * @out_strs: output array of string pointers.
+ * @sz: number of array elements to read.
+ * @skip: Number of strings to skip over at beginning of list.
*
- * Search for a property in a device tree node and retrieve the number of null
- * terminated string contain in it. Returns the number of strings on
- * success, -EINVAL if the property does not exist, -ENODATA if property
- * does not have a value, and -EILSEQ if the string is not null-terminated
- * within the length of the property data.
+ * Don't call this function directly. It is a utility helper for the
+ * of_property_read_string*() family of functions.
*/
-int of_property_count_strings(struct device_node *np, const char *propname)
+int of_property_read_string_helper(struct device_node *np, const char *propname,
+ const char **out_strs, size_t sz, int skip)
{
struct property *prop = of_find_property(np, propname, NULL);
- int i = 0;
- size_t l = 0, total = 0;
- const char *p;
+ int l = 0, i = 0;
+ const char *p, *end;
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
- if (strnlen(prop->value, prop->length) >= prop->length)
- return -EILSEQ;
-
p = prop->value;
+ end = p + prop->length;
- for (i = 0; total < prop->length; total += l, p += l, i++)
- l = strlen(p) + 1;
-
- return i;
+ for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) {
+ l = strnlen(p, end - p) + 1;
+ if (p + l > end)
+ return -EILSEQ;
+ if (out_strs && i >= skip)
+ *out_strs++ = p;
+ }
+ i -= skip;
+ return i <= 0 ? -ENODATA : i;
}
-EXPORT_SYMBOL_GPL(of_property_count_strings);
+EXPORT_SYMBOL_GPL(of_property_read_string_helper);
void of_print_phandle_args(const char *msg, const struct of_phandle_args *args)
{
diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c
index 7800127..11b873c 100644
--- a/drivers/of/selftest.c
+++ b/drivers/of/selftest.c
@@ -339,8 +339,9 @@
selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
}
-static void __init of_selftest_property_match_string(void)
+static void __init of_selftest_property_string(void)
{
+ const char *strings[4];
struct device_node *np;
int rc;
@@ -357,13 +358,66 @@
rc = of_property_match_string(np, "phandle-list-names", "third");
selftest(rc == 2, "third expected:0 got:%i\n", rc);
rc = of_property_match_string(np, "phandle-list-names", "fourth");
- selftest(rc == -ENODATA, "unmatched string; rc=%i", rc);
+ selftest(rc == -ENODATA, "unmatched string; rc=%i\n", rc);
rc = of_property_match_string(np, "missing-property", "blah");
- selftest(rc == -EINVAL, "missing property; rc=%i", rc);
+ selftest(rc == -EINVAL, "missing property; rc=%i\n", rc);
rc = of_property_match_string(np, "empty-property", "blah");
- selftest(rc == -ENODATA, "empty property; rc=%i", rc);
+ selftest(rc == -ENODATA, "empty property; rc=%i\n", rc);
rc = of_property_match_string(np, "unterminated-string", "blah");
- selftest(rc == -EILSEQ, "unterminated string; rc=%i", rc);
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+
+ /* of_property_count_strings() tests */
+ rc = of_property_count_strings(np, "string-property");
+ selftest(rc == 1, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "phandle-list-names");
+ selftest(rc == 3, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "unterminated-string");
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "unterminated-string-list");
+ selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc);
+
+ /* of_property_read_string_index() tests */
+ rc = of_property_read_string_index(np, "string-property", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "foobar"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "string-property", 1, strings);
+ selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 1, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "second"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 2, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "third"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "phandle-list-names", 3, strings);
+ selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "unterminated-string", 0, strings);
+ selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "unterminated-string-list", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "unterminated-string-list", 2, strings); /* should fail */
+ selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[1] = NULL;
+
+ /* of_property_read_string_array() tests */
+ rc = of_property_read_string_array(np, "string-property", strings, 4);
+ selftest(rc == 1, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_read_string_array(np, "phandle-list-names", strings, 4);
+ selftest(rc == 3, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_read_string_array(np, "unterminated-string", strings, 4);
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+ /* -- An incorrectly formed string should cause a failure */
+ rc = of_property_read_string_array(np, "unterminated-string-list", strings, 4);
+ selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc);
+ /* -- parsing the correctly formed strings should still work: */
+ strings[2] = NULL;
+ rc = of_property_read_string_array(np, "unterminated-string-list", strings, 2);
+ selftest(rc == 2 && strings[2] == NULL, "of_property_read_string_array() failure; rc=%i\n", rc);
+ strings[1] = NULL;
+ rc = of_property_read_string_array(np, "phandle-list-names", strings, 1);
+ selftest(rc == 1 && strings[1] == NULL, "Overwrote end of string array; rc=%i, str='%s'\n", rc, strings[1]);
}
#define propcmp(p1, p2) (((p1)->length == (p2)->length) && \
@@ -881,7 +935,7 @@
of_selftest_find_node_by_name();
of_selftest_dynamic();
of_selftest_parse_phandle_with_args();
- of_selftest_property_match_string();
+ of_selftest_property_string();
of_selftest_property_copy();
of_selftest_changeset();
of_selftest_parse_interrupts();
diff --git a/drivers/of/testcase-data/tests-phandle.dtsi b/drivers/of/testcase-data/tests-phandle.dtsi
index ce0fe08..5b1527e 100644
--- a/drivers/of/testcase-data/tests-phandle.dtsi
+++ b/drivers/of/testcase-data/tests-phandle.dtsi
@@ -39,7 +39,9 @@
phandle-list-bad-args = <&provider2 1 0>,
<&provider3 0>;
empty-property;
+ string-property = "foobar";
unterminated-string = [40 41 42 43];
+ unterminated-string-list = "first", "second", [40 41 42 43];
};
};
};
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 8c84298..f091576 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -258,14 +258,16 @@
otg->phy = &phy->phy;
platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL);
- if (IS_ERR(generic_phy))
+ if (IS_ERR(generic_phy)) {
+ pm_runtime_disable(phy->dev);
return PTR_ERR(generic_phy);
+ }
phy_set_drvdata(generic_phy, phy);
- pm_runtime_enable(phy->dev);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
index e12e5b0..9dc3814 100644
--- a/drivers/pinctrl/pinctrl-baytrail.c
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -227,10 +227,14 @@
spin_lock_irqsave(&vg->lock, flags);
value = readl(reg);
+ WARN(value & BYT_DIRECT_IRQ_EN,
+ "Bad pad config for io mode, force direct_irq_en bit clearing");
+
/* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
* are used to indicate high and low level triggering
*/
- value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+ value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG |
+ BYT_TRIG_LVL);
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
@@ -318,7 +322,7 @@
"Potential Error: Setting GPIO with direct_irq_en to output");
reg_val = readl(reg) | BYT_DIR_MASK;
- reg_val &= ~BYT_OUTPUT_EN;
+ reg_val &= ~(BYT_OUTPUT_EN | BYT_INPUT_EN);
if (value)
writel(reg_val | BYT_LEVEL, reg);
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 96a0b75..26c4fd1 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -579,6 +579,17 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"),
},
},
+ {
+ /*
+ * Note no video_set_backlight_video_vendor, we must use the
+ * acer interface, as there is no native backlight interface.
+ */
+ .ident = "Acer KAV80",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"),
+ },
+ },
{}
};
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 3a4951f..c1a6cd6 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -182,6 +182,15 @@
},
{
.callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X550VB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X550VB"),
+ },
+ .driver_data = &quirk_asus_wapf4,
+ },
+ {
+ .callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X55A",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 02152de..ed494f3 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -837,6 +837,13 @@
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
},
},
+ {
+ .ident = "Lenovo Yoga 3 Pro 1370",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3 Pro-1370"),
+ },
+ },
{}
};
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index 5a59665..ff765d8 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -1561,6 +1561,16 @@
},
{
.callback = samsung_dmi_matched,
+ .ident = "NC210",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
+ DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
+ {
+ .callback = samsung_dmi_matched,
.ident = "730U3E/740U3E",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index ef3a190..ab6151f 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -240,6 +240,12 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Qosmio X75-A"),
},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A50-A"),
+ },
+ },
{}
};
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index 86db310..d2a8c64c 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -163,7 +163,7 @@
struct max1586_platform_data *pdata)
{
struct max1586_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
struct device_node *np = dev->of_node;
int i, matched;
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index ef1af2d..f69320e 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -395,7 +395,7 @@
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct device_node *pmic_np, *regulators_np;
struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
+ struct of_regulator_match rmatch = { };
unsigned int i;
pmic_np = iodev->dev->of_node;
diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c
index c67ff05..d158f71 100644
--- a/drivers/regulator/max77693.c
+++ b/drivers/regulator/max77693.c
@@ -227,7 +227,7 @@
struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max77693_regulator_data *rdata = NULL;
int num_rdata, i;
- struct regulator_config config;
+ struct regulator_config config = { };
num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata);
if (!rdata || num_rdata <= 0) {
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index d89792b..45fa240 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -454,7 +454,7 @@
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct device_node *pmic_np, *regulators_np;
struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
+ struct of_regulator_match rmatch = { };
unsigned int i;
pmic_np = iodev->dev->of_node;
diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index 2fc4111..7eee2ca 100644
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -335,7 +335,7 @@
int matched, i;
struct device_node *np;
struct max8660_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)] = { };
np = of_get_child_by_name(dev->of_node, "regulators");
if (!np) {
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 7a51814..5a1d4af 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -211,7 +211,8 @@
search = dev->of_node;
if (!search) {
- dev_err(dev, "Failed to find regulator container node\n");
+ dev_dbg(dev, "Failed to find regulator container node '%s'\n",
+ desc->regulators_node);
return NULL;
}
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 4acefa6..7633b9b 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -341,7 +341,7 @@
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
- struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
+ struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { };
struct device_node *reg_np = NULL;
struct regulator_config config = { };
struct s2mpa01_info *s2mpa01;
diff --git a/drivers/soc/versatile/soc-realview.c b/drivers/soc/versatile/soc-realview.c
index cea8ea34..1a07bf5 100644
--- a/drivers/soc/versatile/soc-realview.c
+++ b/drivers/soc/versatile/soc-realview.c
@@ -26,6 +26,7 @@
{ .compatible = "arm,realview-pb11mp-soc", },
{ .compatible = "arm,realview-pba8-soc", },
{ .compatible = "arm,realview-pbx-soc", },
+ { }
};
static u32 realview_coreid;
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 4482160..831ceb4 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -46,7 +46,7 @@
#define SPI_TCR 0x08
-#define SPI_CTAR(x) (0x0c + (x * 4))
+#define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4))
#define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27)
#define SPI_CTAR_CPOL(x) ((x) << 26)
#define SPI_CTAR_CPHA(x) ((x) << 25)
@@ -70,7 +70,7 @@
#define SPI_PUSHR 0x34
#define SPI_PUSHR_CONT (1 << 31)
-#define SPI_PUSHR_CTAS(x) (((x) & 0x00000007) << 28)
+#define SPI_PUSHR_CTAS(x) (((x) & 0x00000003) << 28)
#define SPI_PUSHR_EOQ (1 << 27)
#define SPI_PUSHR_CTCNT (1 << 26)
#define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index d8a105f..9e9e0f9 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1274,7 +1274,9 @@
if (status != 0)
return status;
write_SSCR0(0, drv_data->ioaddr);
- clk_disable_unprepare(ssp->clk);
+
+ if (!pm_runtime_suspended(dev))
+ clk_disable_unprepare(ssp->clk);
return 0;
}
@@ -1288,7 +1290,8 @@
pxa2xx_spi_dma_resume(drv_data);
/* Enable the SSP clock */
- clk_prepare_enable(ssp->clk);
+ if (!pm_runtime_suspended(dev))
+ clk_prepare_enable(ssp->clk);
/* Restore LPSS private register bits */
lpss_ssp_setup(drv_data);
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
index 6014625..e969107 100644
--- a/drivers/staging/iio/light/isl29028.c
+++ b/drivers/staging/iio/light/isl29028.c
@@ -537,7 +537,8 @@
MODULE_DEVICE_TABLE(i2c, isl29028_id);
static const struct of_device_id isl29028_of_match[] = {
- { .compatible = "isil,isl29028", },
+ { .compatible = "isl,isl29028", },
+ { .compatible = "isil,isl29028", },/* deprecated, don't use */
{ },
};
MODULE_DEVICE_TABLE(of, isl29028_of_match);
diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h
index 0731820..e8c98cf 100644
--- a/drivers/staging/iio/meter/ade7758.h
+++ b/drivers/staging/iio/meter/ade7758.h
@@ -119,7 +119,6 @@
u8 *tx;
u8 *rx;
struct mutex buf_lock;
- const struct iio_chan_spec *ade7758_ring_channels;
struct spi_transfer ring_xfer[4];
struct spi_message ring_msg;
/*
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index abc6006..fb373b8 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -634,9 +634,6 @@
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
.scan_index = 0,
.scan_type = {
@@ -648,9 +645,6 @@
.type = IIO_CURRENT,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
.scan_index = 1,
.scan_type = {
@@ -662,9 +656,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
.scan_index = 2,
.scan_type = {
@@ -676,9 +668,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
.scan_index = 3,
.scan_type = {
@@ -690,9 +680,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
.scan_index = 4,
.scan_type = {
@@ -704,9 +692,6 @@
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
.scan_index = 5,
.scan_type = {
@@ -718,9 +703,6 @@
.type = IIO_CURRENT,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
.scan_index = 6,
.scan_type = {
@@ -732,9 +714,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
.scan_index = 7,
.scan_type = {
@@ -746,9 +726,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
.scan_index = 8,
.scan_type = {
@@ -760,9 +738,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
.scan_index = 9,
.scan_type = {
@@ -774,9 +750,6 @@
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
.scan_index = 10,
.scan_type = {
@@ -788,9 +761,6 @@
.type = IIO_CURRENT,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
.scan_index = 11,
.scan_type = {
@@ -802,9 +772,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
.scan_index = 12,
.scan_type = {
@@ -816,9 +784,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
.scan_index = 13,
.scan_type = {
@@ -830,9 +796,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
.scan_index = 14,
.scan_type = {
@@ -873,13 +837,14 @@
goto error_free_rx;
}
st->us = spi;
- st->ade7758_ring_channels = &ade7758_channels[0];
mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &ade7758_info;
indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ade7758_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ade7758_channels);
ret = ade7758_configure_ring(indio_dev);
if (ret)
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index c0accf8..6e90064 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -85,17 +85,16 @@
**/
static int ade7758_ring_preenable(struct iio_dev *indio_dev)
{
- struct ade7758_state *st = iio_priv(indio_dev);
unsigned channel;
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
+ if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
return -EINVAL;
channel = find_first_bit(indio_dev->active_scan_mask,
indio_dev->masklength);
ade7758_write_waveform_type(&indio_dev->dev,
- st->ade7758_ring_channels[channel].address);
+ indio_dev->channels[channel].address);
return 0;
}
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index f8eb625..62143ba 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -387,15 +387,18 @@
int (*get_trend)(void *, long *))
{
struct device_node *np, *child, *sensor_np;
+ struct thermal_zone_device *tzd = ERR_PTR(-ENODEV);
np = of_find_node_by_name(NULL, "thermal-zones");
if (!np)
return ERR_PTR(-ENODEV);
- if (!dev || !dev->of_node)
+ if (!dev || !dev->of_node) {
+ of_node_put(np);
return ERR_PTR(-EINVAL);
+ }
- sensor_np = dev->of_node;
+ sensor_np = of_node_get(dev->of_node);
for_each_child_of_node(np, child) {
struct of_phandle_args sensor_specs;
@@ -422,16 +425,21 @@
}
if (sensor_specs.np == sensor_np && id == sensor_id) {
- of_node_put(np);
- return thermal_zone_of_add_sensor(child, sensor_np,
- data,
- get_temp,
- get_trend);
+ tzd = thermal_zone_of_add_sensor(child, sensor_np,
+ data,
+ get_temp,
+ get_trend);
+ of_node_put(sensor_specs.np);
+ of_node_put(child);
+ goto exit;
}
+ of_node_put(sensor_specs.np);
}
+exit:
+ of_node_put(sensor_np);
of_node_put(np);
- return ERR_PTR(-ENODEV);
+ return tzd;
}
EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register);
@@ -623,6 +631,7 @@
/* Required for cooling map matching */
trip->np = np;
+ of_node_get(np);
return 0;
}
@@ -730,9 +739,14 @@
return tz;
free_tbps:
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
free_trips:
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
+ of_node_put(gchild);
free_tz:
kfree(tz);
of_node_put(child);
@@ -742,7 +756,13 @@
static inline void of_thermal_free_zone(struct __thermal_zone *tz)
{
+ int i;
+
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
kfree(tz);
}
@@ -814,10 +834,13 @@
/* attempting to build remaining zones still */
}
}
+ of_node_put(np);
return 0;
exit_free:
+ of_node_put(child);
+ of_node_put(np);
of_thermal_free_zone(tz);
/* no memory available, so free what we have built */
@@ -859,4 +882,5 @@
kfree(zone->ops);
of_thermal_free_zone(zone->devdata);
}
+ of_node_put(np);
}
diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
index 3eb2ed9..158f5aa 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.h
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -27,7 +27,7 @@
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
-#define MAX_THRESHOLD_LEVS 5
+#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index acbff14..49c0924 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -77,16 +77,6 @@
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;
- if (pdata->cal_mode == HW_MODE)
- return temp;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp should range between 25 and 125 */
- if (temp < 25 || temp > 125) {
- temp_code = -EINVAL;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp_code = (temp - pdata->first_point_trim) *
@@ -101,7 +91,7 @@
temp_code = temp + pdata->default_temp_offset;
break;
}
-out:
+
return temp_code;
}
@@ -114,16 +104,6 @@
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
- if (pdata->cal_mode == HW_MODE)
- return temp_code;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp_code should range between 75 and 175 */
- if (temp_code < 75 || temp_code > 175) {
- temp = -ENODATA;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp = (temp_code - data->temp_error1) *
@@ -138,18 +118,35 @@
temp = temp_code - pdata->default_temp_offset;
break;
}
-out:
+
return temp;
}
+static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ const struct exynos_tmu_registers *reg = data->pdata->registers;
+ unsigned int val_irq;
+
+ val_irq = readl(data->base + reg->tmu_intstat);
+ /*
+ * Clear the interrupts. Please note that the documentation for
+ * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+ * states that INTCLEAR register has a different placing of bits
+ * responsible for FALL IRQs than INTSTAT register. Exynos5420
+ * and Exynos5440 documentation is correct (Exynos4210 doesn't
+ * support FALL IRQs at all).
+ */
+ writel(val_irq, data->base + reg->tmu_intclear);
+}
+
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con;
+ unsigned int status, trim_info = 0, con, ctrl;
unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i, trigger_levs = 0;
+ int ret = 0, threshold_code, i;
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -164,11 +161,17 @@
}
}
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
- __raw_writel(1, data->base + reg->triminfo_ctrl);
-
- if (pdata->cal_mode == HW_MODE)
- goto skip_calib_data;
+ if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+ for (i = 0; i < reg->triminfo_ctrl_count; i++) {
+ if (pdata->triminfo_reload[i]) {
+ ctrl = readl(data->base +
+ reg->triminfo_ctrl[i]);
+ ctrl |= pdata->triminfo_reload[i];
+ writel(ctrl, data->base +
+ reg->triminfo_ctrl[i]);
+ }
+ }
+ }
/* Save trimming info in order to perform calibration */
if (data->soc == SOC_ARCH_EXYNOS5440) {
@@ -197,7 +200,7 @@
trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
- data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
+ data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
@@ -207,67 +210,33 @@
if (!data->temp_error2)
data->temp_error2 =
- (pdata->efuse_value >> reg->triminfo_85_shift) &
+ (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
-skip_calib_data:
- if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
- dev_err(&pdev->dev, "Invalid max trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- for (i = 0; i < pdata->max_trigger_level; i++) {
- if (!pdata->trigger_levels[i])
- continue;
-
- if ((pdata->trigger_type[i] == HW_TRIP) &&
- (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
- dev_err(&pdev->dev, "Invalid hw trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* Count trigger levels except the HW trip*/
- if (!(pdata->trigger_type[i] == HW_TRIP))
- trigger_levs++;
- }
-
rising_threshold = readl(data->base + reg->threshold_th0);
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
writeb(threshold_code,
data->base + reg->threshold_temp);
- for (i = 0; i < trigger_levs; i++)
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++)
writeb(pdata->trigger_levels[i], data->base +
reg->threshold_th0 + i * sizeof(reg->threshold_th0));
- writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
} else {
/* Write temperature code for rising and falling threshold */
- for (i = 0;
- i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
if (pdata->threshold_falling) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i] -
pdata->threshold_falling);
- if (threshold_code > 0)
- falling_threshold |=
- threshold_code << 8 * i;
+ falling_threshold |= threshold_code << 8 * i;
}
}
@@ -276,9 +245,7 @@
writel(falling_threshold,
data->base + reg->threshold_th1);
- writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
- (reg->intclr_fall_mask << reg->intclr_fall_shift),
- data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
/* if last threshold limit is also present */
i = pdata->max_trigger_level - 1;
@@ -286,10 +253,6 @@
(pdata->trigger_type[i] == HW_TRIP)) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
/* 1-4 level to be assigned in th0 reg */
rising_threshold &= ~(0xff << 8 * i);
@@ -325,7 +288,7 @@
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int con, interrupt_en, cal_val;
+ unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -335,15 +298,11 @@
if (pdata->test_mux)
con |= (pdata->test_mux << reg->test_mux_addr_shift);
- if (pdata->reference_voltage) {
- con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
- con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
- }
+ con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+ con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
- if (pdata->gain) {
- con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
- con |= (pdata->gain << reg->buf_slope_sel_shift);
- }
+ con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(reg->therm_trip_mode_mask <<
@@ -351,29 +310,8 @@
con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
}
- if (pdata->cal_mode == HW_MODE) {
- con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
- cal_val = 0;
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- cal_val = 3;
- break;
- case TYPE_ONE_POINT_TRIMMING_85:
- cal_val = 2;
- break;
- case TYPE_ONE_POINT_TRIMMING_25:
- cal_val = 1;
- break;
- case TYPE_NONE:
- break;
- default:
- dev_err(&pdev->dev, "Invalid calibration type, using none\n");
- }
- con |= cal_val << reg->calib_mode_shift;
- }
-
if (on) {
- con |= (1 << reg->core_en_shift);
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
@@ -383,7 +321,7 @@
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
- con &= ~(1 << reg->core_en_shift);
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
@@ -404,8 +342,16 @@
clk_enable(data->clk);
temp_code = readb(data->base + reg->tmu_cur_temp);
- temp = code_to_temp(data, temp_code);
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ /* temp_code should range between 75 and 175 */
+ if (temp_code < 75 || temp_code > 175) {
+ temp = -ENODATA;
+ goto out;
+ }
+
+ temp = code_to_temp(data, temp_code);
+out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
@@ -465,7 +411,7 @@
struct exynos_tmu_data, irq_work);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val_irq, val_type;
+ unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
@@ -483,9 +429,7 @@
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
- val_irq = readl(data->base + reg->tmu_intstat);
- /* clear the interrupts */
- writel(val_irq, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
clk_disable(data->clk);
mutex_unlock(&data->lock);
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 1b4a644..c58c766 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -34,11 +34,6 @@
TYPE_NONE,
};
-enum calibration_mode {
- SW_MODE,
- HW_MODE,
-};
-
enum soc_type {
SOC_ARCH_EXYNOS3250 = 1,
SOC_ARCH_EXYNOS4210,
@@ -82,46 +77,19 @@
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
* @triminfo_data: register containing 2 pont trimming data
- * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
- * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
- * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
- reg.
+ * @triminfo_ctrl_count: the number of trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
- * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
- * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
* @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
* @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
- * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
- register.
- * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
- * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl
- register.
- * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl
- register.
- * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in
- tmu_ctrl register.
- * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
- * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp
- register.
* @threshold_temp: register containing the base threshold level.
* @threshold_th0: Register containing first set of rising levels.
- * @threshold_th0_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th0_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th0_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th0_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th1: Register containing second set of rising levels.
- * @threshold_th1_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th1_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th1_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th1_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th2: Register containing third set of rising levels.
- * @threshold_th2_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th3: Register containing fourth set of rising levels.
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
@@ -130,68 +98,35 @@
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
- * @inten_fall1_shift: shift bits of falling 1 interrupt bits.
- * @inten_fall2_shift: shift bits of falling 2 interrupt bits.
- * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
- * @intclr_fall_shift: shift bits for interrupt clear fall 0
- * @intclr_rise_shift: shift bits of all rising interrupt bits.
- * @intclr_rise_mask: mask bits of all rising interrupt bits.
- * @intclr_fall_mask: mask bits of all rising interrupt bits.
* @emul_con: TMU emulation controller register.
* @emul_temp_shift: shift bits of emulation temperature.
* @emul_time_shift: shift bits of emulation time.
- * @emul_time_mask: mask bits of emulation time.
* @tmu_irqstatus: register to find which TMU generated interrupts.
* @tmu_pmin: register to get/set the Pmin value.
*/
struct exynos_tmu_registers {
u32 triminfo_data;
- u32 triminfo_25_shift;
- u32 triminfo_85_shift;
- u32 triminfo_ctrl;
- u32 triminfo_ctrl1;
- u32 triminfo_reload_shift;
+ u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
+ u32 triminfo_ctrl_count;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
- u32 buf_vref_sel_shift;
- u32 buf_vref_sel_mask;
u32 therm_trip_mode_shift;
u32 therm_trip_mode_mask;
u32 therm_trip_en_shift;
- u32 buf_slope_sel_shift;
- u32 buf_slope_sel_mask;
- u32 calib_mode_shift;
- u32 calib_mode_mask;
- u32 therm_trip_tq_en_shift;
- u32 core_en_shift;
u32 tmu_status;
u32 tmu_cur_temp;
- u32 tmu_cur_temp_shift;
u32 threshold_temp;
u32 threshold_th0;
- u32 threshold_th0_l0_shift;
- u32 threshold_th0_l1_shift;
- u32 threshold_th0_l2_shift;
- u32 threshold_th0_l3_shift;
-
u32 threshold_th1;
- u32 threshold_th1_l0_shift;
- u32 threshold_th1_l1_shift;
- u32 threshold_th1_l2_shift;
- u32 threshold_th1_l3_shift;
-
u32 threshold_th2;
- u32 threshold_th2_l0_shift;
-
- u32 threshold_th3;
u32 threshold_th3_l0_shift;
u32 tmu_inten;
@@ -200,22 +135,14 @@
u32 inten_rise2_shift;
u32 inten_rise3_shift;
u32 inten_fall0_shift;
- u32 inten_fall1_shift;
- u32 inten_fall2_shift;
- u32 inten_fall3_shift;
u32 tmu_intstat;
u32 tmu_intclear;
- u32 intclr_fall_shift;
- u32 intclr_rise_shift;
- u32 intclr_fall_mask;
- u32 intclr_rise_mask;
u32 emul_con;
u32 emul_temp_shift;
u32 emul_time_shift;
- u32 emul_time_mask;
u32 tmu_irqstatus;
u32 tmu_pmin;
@@ -250,11 +177,12 @@
* 1 = enable trigger_level[] interrupt,
* 0 = disable trigger_level[] interrupt
* @max_trigger_level: max trigger level supported by the TMU
+ * @non_hw_trigger_levels: number of defined non-hardware trigger levels
* @gain: gain of amplifier in the positive-TC generator block
- * 0 <= gain <= 15
+ * 0 < gain <= 15
* @reference_voltage: reference voltage of amplifier
* in the positive-TC generator block
- * 0 <= reference_voltage <= 31
+ * 0 < reference_voltage <= 31
* @noise_cancel_mode: noise cancellation mode
* 000, 100, 101, 110 and 111 can be different modes
* @type: determines the type of SOC
@@ -265,8 +193,8 @@
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
* @test_mux; information if SoC supports test MUX
+ * @triminfo_reload: reload value to read TRIMINFO register
* @cal_type: calibration type for temperature
- * @cal_mode: calibration mode for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
* applicable to only some of the trigger levels.
@@ -284,6 +212,7 @@
enum trigger_type trigger_type[MAX_TRIP_COUNT];
bool trigger_enable[MAX_TRIP_COUNT];
u8 max_trigger_level;
+ u8 non_hw_trigger_levels;
u8 gain;
u8 reference_voltage;
u8 noise_cancel_mode;
@@ -295,9 +224,9 @@
u8 second_point_trim;
u8 default_temp_offset;
u8 test_mux;
+ u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
- enum calibration_mode cal_mode;
enum soc_type type;
struct freq_clip_table freq_tab[4];
unsigned int freq_tab_count;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index aa8e0de..2683d28 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -27,14 +27,7 @@
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
@@ -46,7 +39,6 @@
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
@@ -64,6 +56,7 @@
.trigger_type[1] = THROTTLE_ACTIVE,
.trigger_type[2] = SW_TRIP,
.max_trigger_level = 4,
+ .non_hw_trigger_levels = 3,
.gain = 15,
.reference_voltage = 7,
.cal_type = TYPE_ONE_POINT_TRIMMING,
@@ -93,18 +86,14 @@
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
+ .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 2,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -116,14 +105,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS3250_TMU_DATA \
@@ -141,6 +125,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -160,8 +145,10 @@
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
+ .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos3250_tmu_registers, \
- .features = (TMU_SUPPORT_EMULATION | \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
#endif
@@ -182,20 +169,13 @@
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
- .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
- .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 1,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -208,14 +188,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
@@ -233,6 +208,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -252,6 +228,7 @@
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
@@ -286,18 +263,11 @@
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -310,14 +280,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK,
.emul_con = EXYNOS5260_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5260_TMU_DATA \
@@ -335,6 +300,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -359,9 +325,8 @@
#define EXYNOS5260_TMU_DATA \
__EXYNOS5260_TMU_DATA \
.type = SOC_ARCH_EXYNOS5260, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
.tmu_data = {
@@ -378,17 +343,10 @@
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -402,14 +360,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5420_TMU_DATA \
@@ -427,6 +380,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -451,16 +405,15 @@
#define EXYNOS5420_TMU_DATA \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5250, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
#define EXYNOS5420_TMU_DATA_SHARED \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \
+ TMU_SUPPORT_ADDRESS_MULTIPLE)
struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
.tmu_data = {
@@ -477,19 +430,10 @@
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
- .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
@@ -504,10 +448,6 @@
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
- .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
@@ -521,11 +461,11 @@
.trigger_type[0] = SW_TRIP, \
.trigger_type[4] = HW_TRIP, \
.max_trigger_level = 5, \
+ .non_hw_trigger_levels = 1, \
.gain = 5, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
- .cal_mode = 0, \
.efuse_value = 0x5b2d, \
.min_efuse_value = 16, \
.max_efuse_value = 76, \
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index f0979e5..65e2ea6 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -39,55 +39,31 @@
#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
#define EXYNOS_TMU_CORE_EN_SHIFT 0
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1 0x10
+
/* Exynos4210 specific registers */
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
-#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
-#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
-#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
-#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
-#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
-#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
-#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
-#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
-#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
-#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
-
-/* Exynos5250 and Exynos4412 specific registers */
-#define EXYNOS_TMU_TRIMINFO_CON 0x14
+/* Exynos5250, Exynos4412, Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2 0x14
#define EXYNOS_THD_TEMP_RISE 0x50
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
-#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
-#define EXYNOS_TMU_RISE_INT_MASK 0x111
-#define EXYNOS_TMU_RISE_INT_SHIFT 0
-#define EXYNOS_TMU_FALL_INT_MASK 0x111
-#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
-#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
-#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
-#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16
-#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
-#define EXYNOS_TMU_CALIB_MODE_SHIFT 4
-#define EXYNOS_TMU_CALIB_MODE_MASK 0x3
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
-#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
-#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
-#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_MASK 0xffff
@@ -103,10 +79,6 @@
#define EXYNOS5260_TMU_REG_INTEN 0xC0
#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
-#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111
-#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16)
-#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111
-#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111
#define EXYNOS5260_EMUL_CON 0x100
/* Exynos4412 specific */
@@ -122,29 +94,17 @@
#define EXYNOS5440_TMU_S0_7_TH0 0x110
#define EXYNOS5440_TMU_S0_7_TH1 0x130
#define EXYNOS5440_TMU_S0_7_TH2 0x150
-#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
#define EXYNOS5440_TMU_S0_7_IRQ 0x230
/* exynos5440 common registers */
#define EXYNOS5440_TMU_IRQ_STATUS 0x000
#define EXYNOS5440_TMU_PMIN 0x004
-#define EXYNOS5440_TMU_TEMP 0x008
-#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
-#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
-#define EXYNOS5440_TMU_FALL_INT_MASK 0xf
#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
-#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
-#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
-#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
-#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0
-#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8
-#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16
-#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 9bf10aa..43b9070 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1575,8 +1575,7 @@
thermal_zone_device_update(tz);
- if (!result)
- return tz;
+ return tz;
unregister:
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 89c4cee..2e900a9 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2413,12 +2413,17 @@
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
- if (input_available_p(tty, 1))
- mask |= POLLIN | POLLRDNORM;
- if (tty->packet && tty->link->ctrl_status)
- mask |= POLLPRI | POLLIN | POLLRDNORM;
if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
mask |= POLLHUP;
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ else if (mask & POLLHUP) {
+ tty_flush_to_ldisc(tty);
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ }
+ if (tty->packet && tty->link->ctrl_status)
+ mask |= POLLPRI | POLLIN | POLLRDNORM;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 8f37d57..de7aae5 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -81,7 +81,7 @@
/* Set to highest baudrate supported */
if (baud >= 1152000)
baud = 921600;
- quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud);
+ quot = (port->uartclk / (256 * baud)) + 1;
}
/*
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 8bc2563..56982da4 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -158,7 +158,7 @@
if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
return -EBUSY;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL)
return -ENOMEM;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index df3a8c7..eaeb9a0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -363,7 +363,7 @@
* The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
* Die! Die! Die!
*/
- if (baud == 38400)
+ if (try == 0 && baud == 38400)
baud = altbaud;
/*
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 16a2c02..0508a1d 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1709,6 +1709,8 @@
int pty_master, tty_closing, o_tty_closing, do_sleep;
int idx;
char buf[64];
+ long timeout = 0;
+ int once = 1;
if (tty_paranoia_check(tty, inode, __func__))
return 0;
@@ -1789,11 +1791,18 @@
if (!do_sleep)
break;
- printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
- __func__, tty_name(tty, buf));
+ if (once) {
+ once = 0;
+ printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
+ __func__, tty_name(tty, buf));
+ }
tty_unlock_pair(tty, o_tty);
mutex_unlock(&tty_mutex);
- schedule();
+ schedule_timeout_killable(timeout);
+ if (timeout < 120 * HZ)
+ timeout = 2 * timeout + 1;
+ else
+ timeout = MAX_SCHEDULE_TIMEOUT;
}
/*
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 610b720..59b25e0 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -539,6 +539,12 @@
/* Save original vc_unipagdir_loc in case we allocate a new one */
p = *vc->vc_uni_pagedir_loc;
+
+ if (!p) {
+ err = -EINVAL;
+
+ goto out_unlock;
+ }
if (p->refcount > 1) {
int j, k;
@@ -623,6 +629,7 @@
set_inverse_transl(vc, p, i); /* Update inverse translations */
set_inverse_trans_unicode(vc, p);
+out_unlock:
console_unlock();
return err;
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e934e19..077d58a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -60,6 +60,9 @@
static DEFINE_MUTEX(acm_table_lock);
+static void acm_tty_set_termios(struct tty_struct *tty,
+ struct ktermios *termios_old);
+
/*
* acm_table accessors
*/
@@ -145,8 +148,15 @@
/* devices aren't required to support these requests.
* the cdc acm descriptor tells whether they do...
*/
-#define acm_set_control(acm, control) \
- acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0)
+static inline int acm_set_control(struct acm *acm, int control)
+{
+ if (acm->quirks & QUIRK_CONTROL_LINE_STATE)
+ return -EOPNOTSUPP;
+
+ return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+ control, NULL, 0);
+}
+
#define acm_set_line(acm, line) \
acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line))
#define acm_send_break(acm, ms) \
@@ -554,6 +564,8 @@
goto error_submit_urb;
}
+ acm_tty_set_termios(tty, NULL);
+
/*
* Unthrottle device in case the TTY was closed while throttled.
*/
@@ -980,11 +992,12 @@
/* FIXME: Needs to clear unsupported bits in the termios */
acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
- if (!newline.dwDTERate) {
+ if (C_BAUD(tty) == B0) {
newline.dwDTERate = acm->line.dwDTERate;
newctrl &= ~ACM_CTRL_DTR;
- } else
+ } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
newctrl |= ACM_CTRL_DTR;
+ }
if (newctrl != acm->ctrlout)
acm_set_control(acm, acm->ctrlout = newctrl);
@@ -1314,6 +1327,7 @@
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
init_usb_anchor(&acm->delayed);
+ acm->quirks = quirks;
buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
@@ -1681,6 +1695,9 @@
{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
+ .driver_info = QUIRK_CONTROL_LINE_STATE, },
+ { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
/* Motorola H24 HSPA module: */
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index fc75651..d3251eb 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -121,6 +121,7 @@
unsigned int throttle_req:1; /* throttle requested */
u8 bInterval;
struct usb_anchor delayed; /* writes queued for a device about to be woken */
+ unsigned long quirks;
};
#define CDC_DATA_INTERFACE_TYPE 0x0a
@@ -132,3 +133,4 @@
#define NOT_A_MODEM BIT(3)
#define NO_DATA_INTERFACE BIT(4)
#define IGNORE_DEVICE BIT(5)
+#define QUIRK_CONTROL_LINE_STATE BIT(6)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index b84fb14..a6efb41 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2060,6 +2060,8 @@
return -EINVAL;
if (dev->speed != USB_SPEED_SUPER)
return -EINVAL;
+ if (dev->state < USB_STATE_CONFIGURED)
+ return -ENODEV;
for (i = 0; i < num_eps; i++) {
/* Streams only apply to bulk endpoints. */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 11e80ac..b649fef 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4468,9 +4468,6 @@
if (retval)
goto fail;
- if (hcd->usb_phy && !hdev->parent)
- usb_phy_notify_connect(hcd->usb_phy, udev->speed);
-
/*
* Some superspeed devices have finished the link training process
* and attached to a superspeed hub port, but the device descriptor
@@ -4627,8 +4624,7 @@
/* Disconnect any existing devices under this port */
if (udev) {
- if (hcd->usb_phy && !hdev->parent &&
- !(portstatus & USB_PORT_STAT_CONNECTION))
+ if (hcd->usb_phy && !hdev->parent)
usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
usb_disconnect(&port_dev->child);
}
@@ -4783,6 +4779,10 @@
port_dev->child = NULL;
spin_unlock_irq(&device_state_lock);
mutex_unlock(&usb_port_peer_mutex);
+ } else {
+ if (hcd->usb_phy && !hdev->parent)
+ usb_phy_notify_connect(hcd->usb_phy,
+ udev->speed);
}
}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 5ae883d..39b4081 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -97,6 +97,12 @@
{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
+ { USB_DEVICE(0x04f3, 0x009b), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
+ { USB_DEVICE(0x04f3, 0x016f), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index eee8709..8b5c079 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2327,7 +2327,7 @@
u32 usb_status = readl(hsotg->regs + GOTGCTL);
- dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+ dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
readl(hsotg->regs + GNPTXSTS));
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a8a30b1..a3ca137 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -234,7 +234,7 @@
config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
@@ -550,7 +550,7 @@
config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index d0d8fad..1db0626 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -607,7 +607,7 @@
wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100)
dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
- le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8,
+ (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8,
le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff);
result = 0;
error:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 280dde9..9a69b1f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -128,20 +128,6 @@
xhci->quirks |= XHCI_AVOID_BEI;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) {
- /* Workaround for occasional spurious wakeups from S5 (or
- * any other sleep) on Haswell machines with LPT and LPT-LP
- * with the new Intel BIOS
- */
- /* Limit the quirk to only known vendors, as this triggers
- * yet another BIOS bug on some other machines
- * https://bugzilla.kernel.org/show_bug.cgi?id=66171
- */
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
- xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
- }
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
}
@@ -162,6 +148,10 @@
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+ pdev->device == 0x1042)
+ xhci->quirks |= XHCI_BROKEN_STREAMS;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 3d2bd65..02c420a 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -335,7 +335,8 @@
port->interrupt_out_urb->transfer_buffer_length = length;
priv->cur_pos = priv->cur_pos + length;
- result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
+ result = usb_submit_urb(port->interrupt_out_urb,
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
todo = priv->filled - priv->cur_pos;
@@ -350,7 +351,7 @@
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
result = usb_submit_urb(port->interrupt_in_urb,
- GFP_NOIO);
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
}
}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4856fb7..4b7bfb3 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -215,7 +215,7 @@
/* The connected devices do not have a bulk write endpoint,
* to transmit data to de barcode device the control endpoint is used */
- dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
if (!dr) {
count = -ENOMEM;
goto error_no_dr;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 4bc2fc9..73f125e 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -52,7 +52,7 @@
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
- 0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT);
+ 0x01, 0x0, us->iobuf, 0x1, 5 * HZ);
usb_stor_dbg(us, "-- result is %d\n", result);
return 0;
@@ -100,7 +100,7 @@
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 0x01, 0x0, NULL, 0x0, 1000);
+ 0x01, 0x0, NULL, 0x0, 1 * HZ);
usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
return 0;
}
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 8591d89..27e4a58 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -626,6 +626,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int config_autodelink_before_power_down(struct us_data *us)
{
struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
@@ -716,6 +717,7 @@
}
}
}
+#endif
#ifdef CONFIG_REALTEK_AUTOPM
static void fw5895_set_mmc_wp(struct us_data *us)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 22c7d43..b1d815e 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1118,6 +1118,31 @@
*/
if (result == USB_STOR_XFER_LONG)
fake_sense = 1;
+
+ /*
+ * Sometimes a device will mistakenly skip the data phase
+ * and go directly to the status phase without sending a
+ * zero-length packet. If we get a 13-byte response here,
+ * check whether it really is a CSW.
+ */
+ if (result == USB_STOR_XFER_SHORT &&
+ srb->sc_data_direction == DMA_FROM_DEVICE &&
+ transfer_length - scsi_get_resid(srb) ==
+ US_BULK_CS_WRAP_LEN) {
+ struct scatterlist *sg = NULL;
+ unsigned int offset = 0;
+
+ if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+ US_BULK_CS_WRAP_LEN, srb, &sg,
+ &offset, FROM_XFER_BUF) ==
+ US_BULK_CS_WRAP_LEN &&
+ bcs->Signature ==
+ cpu_to_le32(US_BULK_CS_SIGN)) {
+ usb_stor_dbg(us, "Device skipped data phase\n");
+ scsi_set_resid(srb, transfer_length);
+ goto skipped_data_phase;
+ }
+ }
}
/* See flow chart on pg 15 of the Bulk Only Transport spec for
@@ -1153,6 +1178,7 @@
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
+ skipped_data_phase:
/* check bulk status */
residue = le32_to_cpu(bcs->Residue);
usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 8511b54..2fefaf9 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -54,6 +54,20 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */
+UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999,
+ "Seagate",
+ "Backup Plus",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
"Seagate",
@@ -61,6 +75,13 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
+ "Seagate",
+ "Backup+ BK",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
"JMicron",
@@ -75,3 +96,10 @@
"ASM1051",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
+ "VIA",
+ "VL711",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
index 783a943..84a2d18 100644
--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -413,7 +413,7 @@
ret = 0;
fail:
while (ret < 0 && !list_empty(&tmplist)) {
- sums = list_entry(&tmplist, struct btrfs_ordered_sum, list);
+ sums = list_entry(tmplist.next, struct btrfs_ordered_sum, list);
list_del(&sums->list);
kfree(sums);
}
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 97de0fb..a960440 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -925,7 +925,7 @@
size_t veclen, size_t total)
{
int ret;
- struct msghdr msg;
+ struct msghdr msg = {.msg_flags = 0,};
if (sock == NULL) {
ret = -EINVAL;
diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c
index 4e9d7c1..2a7ef4f 100644
--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -168,7 +168,7 @@
{
struct ovl_dir_cache *cache = od->cache;
- list_del(&od->cursor.l_node);
+ list_del_init(&od->cursor.l_node);
WARN_ON(cache->refcount <= 0);
cache->refcount--;
if (!cache->refcount) {
diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index 92e8f99..2810026 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1338,7 +1338,10 @@
goto out;
}
-
+/*
+ * Preallocate and zero a range of a file. This mechanism has the allocation
+ * semantics of fallocate and in addition converts data in the range to zeroes.
+ */
int
xfs_zero_file_space(
struct xfs_inode *ip,
@@ -1346,65 +1349,30 @@
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
- uint granularity;
- xfs_off_t start_boundary;
- xfs_off_t end_boundary;
+ uint blksize;
int error;
trace_xfs_zero_file_space(ip);
- granularity = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
+ blksize = 1 << mp->m_sb.sb_blocklog;
/*
- * Round the range of extents we are going to convert inwards. If the
- * offset is aligned, then it doesn't get changed so we zero from the
- * start of the block offset points to.
+ * Punch a hole and prealloc the range. We use hole punch rather than
+ * unwritten extent conversion for two reasons:
+ *
+ * 1.) Hole punch handles partial block zeroing for us.
+ *
+ * 2.) If prealloc returns ENOSPC, the file range is still zero-valued
+ * by virtue of the hole punch.
*/
- start_boundary = round_up(offset, granularity);
- end_boundary = round_down(offset + len, granularity);
+ error = xfs_free_file_space(ip, offset, len);
+ if (error)
+ goto out;
- ASSERT(start_boundary >= offset);
- ASSERT(end_boundary <= offset + len);
-
- if (start_boundary < end_boundary - 1) {
- /*
- * Writeback the range to ensure any inode size updates due to
- * appending writes make it to disk (otherwise we could just
- * punch out the delalloc blocks).
- */
- error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
- start_boundary, end_boundary - 1);
- if (error)
- goto out;
- truncate_pagecache_range(VFS_I(ip), start_boundary,
- end_boundary - 1);
-
- /* convert the blocks */
- error = xfs_alloc_file_space(ip, start_boundary,
- end_boundary - start_boundary - 1,
- XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT);
- if (error)
- goto out;
-
- /* We've handled the interior of the range, now for the edges */
- if (start_boundary != offset) {
- error = xfs_iozero(ip, offset, start_boundary - offset);
- if (error)
- goto out;
- }
-
- if (end_boundary != offset + len)
- error = xfs_iozero(ip, end_boundary,
- offset + len - end_boundary);
-
- } else {
- /*
- * It's either a sub-granularity range or the range spanned lies
- * partially across two adjacent blocks.
- */
- error = xfs_iozero(ip, offset, len);
- }
-
+ error = xfs_alloc_file_space(ip, round_down(offset, blksize),
+ round_up(offset + len, blksize) -
+ round_down(offset, blksize),
+ XFS_BMAPI_PREALLOC);
out:
return error;
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index f1deb96..894924a 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -236,8 +236,10 @@
XFS_WANT_CORRUPTED_RETURN(stat == 1);
/* Check if the record contains the inode in request */
- if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino)
- return -EINVAL;
+ if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino) {
+ *icount = 0;
+ return 0;
+ }
idx = agino - irec->ir_startino + 1;
if (idx < XFS_INODES_PER_CHUNK &&
@@ -262,75 +264,76 @@
#define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size)
+struct xfs_bulkstat_agichunk {
+ char __user **ac_ubuffer;/* pointer into user's buffer */
+ int ac_ubleft; /* bytes left in user's buffer */
+ int ac_ubelem; /* spaces used in user's buffer */
+};
+
/*
* Process inodes in chunk with a pointer to a formatter function
* that will iget the inode and fill in the appropriate structure.
*/
-int
+static int
xfs_bulkstat_ag_ichunk(
struct xfs_mount *mp,
xfs_agnumber_t agno,
struct xfs_inobt_rec_incore *irbp,
bulkstat_one_pf formatter,
size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp)
+ struct xfs_bulkstat_agichunk *acp,
+ xfs_agino_t *last_agino)
{
- xfs_ino_t lastino = acp->ac_lastino;
char __user **ubufp = acp->ac_ubuffer;
- int ubleft = acp->ac_ubleft;
- int ubelem = acp->ac_ubelem;
- int chunkidx, clustidx;
+ int chunkidx;
int error = 0;
- xfs_agino_t agino;
+ xfs_agino_t agino = irbp->ir_startino;
- for (agino = irbp->ir_startino, chunkidx = clustidx = 0;
- XFS_BULKSTAT_UBLEFT(ubleft) &&
- irbp->ir_freecount < XFS_INODES_PER_CHUNK;
- chunkidx++, clustidx++, agino++) {
- int fmterror; /* bulkstat formatter result */
+ for (chunkidx = 0; chunkidx < XFS_INODES_PER_CHUNK;
+ chunkidx++, agino++) {
+ int fmterror;
int ubused;
- xfs_ino_t ino = XFS_AGINO_TO_INO(mp, agno, agino);
- ASSERT(chunkidx < XFS_INODES_PER_CHUNK);
+ /* inode won't fit in buffer, we are done */
+ if (acp->ac_ubleft < statstruct_size)
+ break;
/* Skip if this inode is free */
- if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free) {
- lastino = ino;
+ if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free)
continue;
- }
-
- /*
- * Count used inodes as free so we can tell when the
- * chunk is used up.
- */
- irbp->ir_freecount++;
/* Get the inode and fill in a single buffer */
ubused = statstruct_size;
- error = formatter(mp, ino, *ubufp, ubleft, &ubused, &fmterror);
- if (fmterror == BULKSTAT_RV_NOTHING) {
- if (error && error != -ENOENT && error != -EINVAL) {
- ubleft = 0;
- break;
- }
- lastino = ino;
- continue;
- }
- if (fmterror == BULKSTAT_RV_GIVEUP) {
- ubleft = 0;
+ error = formatter(mp, XFS_AGINO_TO_INO(mp, agno, agino),
+ *ubufp, acp->ac_ubleft, &ubused, &fmterror);
+
+ if (fmterror == BULKSTAT_RV_GIVEUP ||
+ (error && error != -ENOENT && error != -EINVAL)) {
+ acp->ac_ubleft = 0;
ASSERT(error);
break;
}
- if (*ubufp)
- *ubufp += ubused;
- ubleft -= ubused;
- ubelem++;
- lastino = ino;
+
+ /* be careful not to leak error if at end of chunk */
+ if (fmterror == BULKSTAT_RV_NOTHING || error) {
+ error = 0;
+ continue;
+ }
+
+ *ubufp += ubused;
+ acp->ac_ubleft -= ubused;
+ acp->ac_ubelem++;
}
- acp->ac_lastino = lastino;
- acp->ac_ubleft = ubleft;
- acp->ac_ubelem = ubelem;
+ /*
+ * Post-update *last_agino. At this point, agino will always point one
+ * inode past the last inode we processed successfully. Hence we
+ * substract that inode when setting the *last_agino cursor so that we
+ * return the correct cookie to userspace. On the next bulkstat call,
+ * the inode under the lastino cookie will be skipped as we have already
+ * processed it here.
+ */
+ *last_agino = agino - 1;
return error;
}
@@ -353,45 +356,33 @@
xfs_agino_t agino; /* inode # in allocation group */
xfs_agnumber_t agno; /* allocation group number */
xfs_btree_cur_t *cur; /* btree cursor for ialloc btree */
- int end_of_ag; /* set if we've seen the ag end */
- int error; /* error code */
- int fmterror;/* bulkstat formatter result */
- int i; /* loop index */
- int icount; /* count of inodes good in irbuf */
size_t irbsize; /* size of irec buffer in bytes */
- xfs_ino_t ino; /* inode number (filesystem) */
- xfs_inobt_rec_incore_t *irbp; /* current irec buffer pointer */
xfs_inobt_rec_incore_t *irbuf; /* start of irec buffer */
- xfs_inobt_rec_incore_t *irbufend; /* end of good irec buffer entries */
- xfs_ino_t lastino; /* last inode number returned */
int nirbuf; /* size of irbuf */
- int rval; /* return value error code */
- int tmp; /* result value from btree calls */
int ubcount; /* size of user's buffer */
- int ubleft; /* bytes left in user's buffer */
- char __user *ubufp; /* pointer into user's buffer */
- int ubelem; /* spaces used in user's buffer */
+ struct xfs_bulkstat_agichunk ac;
+ int error = 0;
/*
* Get the last inode value, see if there's nothing to do.
*/
- ino = (xfs_ino_t)*lastinop;
- lastino = ino;
- agno = XFS_INO_TO_AGNO(mp, ino);
- agino = XFS_INO_TO_AGINO(mp, ino);
+ agno = XFS_INO_TO_AGNO(mp, *lastinop);
+ agino = XFS_INO_TO_AGINO(mp, *lastinop);
if (agno >= mp->m_sb.sb_agcount ||
- ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
+ *lastinop != XFS_AGINO_TO_INO(mp, agno, agino)) {
*done = 1;
*ubcountp = 0;
return 0;
}
ubcount = *ubcountp; /* statstruct's */
- ubleft = ubcount * statstruct_size; /* bytes */
- *ubcountp = ubelem = 0;
+ ac.ac_ubuffer = &ubuffer;
+ ac.ac_ubleft = ubcount * statstruct_size; /* bytes */;
+ ac.ac_ubelem = 0;
+
+ *ubcountp = 0;
*done = 0;
- fmterror = 0;
- ubufp = ubuffer;
+
irbuf = kmem_zalloc_greedy(&irbsize, PAGE_SIZE, PAGE_SIZE * 4);
if (!irbuf)
return -ENOMEM;
@@ -402,9 +393,13 @@
* Loop over the allocation groups, starting from the last
* inode returned; 0 means start of the allocation group.
*/
- rval = 0;
- while (XFS_BULKSTAT_UBLEFT(ubleft) && agno < mp->m_sb.sb_agcount) {
- cond_resched();
+ while (agno < mp->m_sb.sb_agcount) {
+ struct xfs_inobt_rec_incore *irbp = irbuf;
+ struct xfs_inobt_rec_incore *irbufend = irbuf + nirbuf;
+ bool end_of_ag = false;
+ int icount = 0;
+ int stat;
+
error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp);
if (error)
break;
@@ -414,10 +409,6 @@
*/
cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno,
XFS_BTNUM_INO);
- irbp = irbuf;
- irbufend = irbuf + nirbuf;
- end_of_ag = 0;
- icount = 0;
if (agino > 0) {
/*
* In the middle of an allocation group, we need to get
@@ -427,22 +418,23 @@
error = xfs_bulkstat_grab_ichunk(cur, agino, &icount, &r);
if (error)
- break;
+ goto del_cursor;
if (icount) {
irbp->ir_startino = r.ir_startino;
irbp->ir_freecount = r.ir_freecount;
irbp->ir_free = r.ir_free;
irbp++;
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
}
/* Increment to the next record */
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
} else {
/* Start of ag. Lookup the first inode chunk */
- error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &tmp);
+ error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &stat);
}
- if (error)
- break;
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
+ }
/*
* Loop through inode btree records in this ag,
@@ -451,10 +443,10 @@
while (irbp < irbufend && icount < ubcount) {
struct xfs_inobt_rec_incore r;
- error = xfs_inobt_get_rec(cur, &r, &i);
- if (error || i == 0) {
- end_of_ag = 1;
- break;
+ error = xfs_inobt_get_rec(cur, &r, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
}
/*
@@ -469,77 +461,79 @@
irbp++;
icount += XFS_INODES_PER_CHUNK - r.ir_freecount;
}
- /*
- * Set agino to after this chunk and bump the cursor.
- */
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
+ }
cond_resched();
}
+
/*
- * Drop the btree buffers and the agi buffer.
- * We can't hold any of the locks these represent
- * when calling iget.
+ * Drop the btree buffers and the agi buffer as we can't hold any
+ * of the locks these represent when calling iget. If there is a
+ * pending error, then we are done.
*/
+del_cursor:
xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
xfs_buf_relse(agbp);
+ if (error)
+ break;
/*
- * Now format all the good inodes into the user's buffer.
+ * Now format all the good inodes into the user's buffer. The
+ * call to xfs_bulkstat_ag_ichunk() sets up the agino pointer
+ * for the next loop iteration.
*/
irbufend = irbp;
for (irbp = irbuf;
- irbp < irbufend && XFS_BULKSTAT_UBLEFT(ubleft); irbp++) {
- struct xfs_bulkstat_agichunk ac;
-
- ac.ac_lastino = lastino;
- ac.ac_ubuffer = &ubuffer;
- ac.ac_ubleft = ubleft;
- ac.ac_ubelem = ubelem;
+ irbp < irbufend && ac.ac_ubleft >= statstruct_size;
+ irbp++) {
error = xfs_bulkstat_ag_ichunk(mp, agno, irbp,
- formatter, statstruct_size, &ac);
+ formatter, statstruct_size, &ac,
+ &agino);
if (error)
- rval = error;
-
- lastino = ac.ac_lastino;
- ubleft = ac.ac_ubleft;
- ubelem = ac.ac_ubelem;
+ break;
cond_resched();
}
+
/*
- * Set up for the next loop iteration.
+ * If we've run out of space or had a formatting error, we
+ * are now done
*/
- if (XFS_BULKSTAT_UBLEFT(ubleft)) {
- if (end_of_ag) {
- agno++;
- agino = 0;
- } else
- agino = XFS_INO_TO_AGINO(mp, lastino);
- } else
+ if (ac.ac_ubleft < statstruct_size || error)
break;
+
+ if (end_of_ag) {
+ agno++;
+ agino = 0;
+ }
}
/*
* Done, we're either out of filesystem or space to put the data.
*/
kmem_free(irbuf);
- *ubcountp = ubelem;
- /*
- * Found some inodes, return them now and return the error next time.
- */
- if (ubelem)
- rval = 0;
- if (agno >= mp->m_sb.sb_agcount) {
- /*
- * If we ran out of filesystem, mark lastino as off
- * the end of the filesystem, so the next call
- * will return immediately.
- */
- *lastinop = (xfs_ino_t)XFS_AGINO_TO_INO(mp, agno, 0);
- *done = 1;
- } else
- *lastinop = (xfs_ino_t)lastino;
+ *ubcountp = ac.ac_ubelem;
- return rval;
+ /*
+ * We found some inodes, so clear the error status and return them.
+ * The lastino pointer will point directly at the inode that triggered
+ * any error that occurred, so on the next call the error will be
+ * triggered again and propagated to userspace as there will be no
+ * formatted inodes in the buffer.
+ */
+ if (ac.ac_ubelem)
+ error = 0;
+
+ /*
+ * If we ran out of filesystem, lastino will point off the end of
+ * the filesystem so the next call will return immediately.
+ */
+ *lastinop = XFS_AGINO_TO_INO(mp, agno, agino);
+ if (agno >= mp->m_sb.sb_agcount)
+ *done = 1;
+
+ return error;
}
int
diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h
index aaed080..6ea8b39 100644
--- a/fs/xfs/xfs_itable.h
+++ b/fs/xfs/xfs_itable.h
@@ -30,22 +30,6 @@
int *ubused,
int *stat);
-struct xfs_bulkstat_agichunk {
- xfs_ino_t ac_lastino; /* last inode returned */
- char __user **ac_ubuffer;/* pointer into user's buffer */
- int ac_ubleft; /* bytes left in user's buffer */
- int ac_ubelem; /* spaces used in user's buffer */
-};
-
-int
-xfs_bulkstat_ag_ichunk(
- struct xfs_mount *mp,
- xfs_agnumber_t agno,
- struct xfs_inobt_rec_incore *irbp,
- bulkstat_one_pf formatter,
- size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp);
-
/*
* Values for stat return value.
*/
diff --git a/include/dt-bindings/clock/r8a7740-clock.h b/include/dt-bindings/clock/r8a7740-clock.h
index f6b4b0f..476135d 100644
--- a/include/dt-bindings/clock/r8a7740-clock.h
+++ b/include/dt-bindings/clock/r8a7740-clock.h
@@ -40,6 +40,7 @@
/* MSTP2 */
#define R8A7740_CLK_SCIFA6 30
+#define R8A7740_CLK_INTCA 29
#define R8A7740_CLK_SCIFA7 22
#define R8A7740_CLK_DMAC1 18
#define R8A7740_CLK_DMAC2 17
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 8ea7ab0..e3a3fb8 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -26,8 +26,18 @@
#define R8A7790_CLK_MSIOF0 0
/* MSTP1 */
-#define R8A7790_CLK_JPU 6
+#define R8A7790_CLK_VCP1 0
+#define R8A7790_CLK_VCP0 1
+#define R8A7790_CLK_VPC1 2
+#define R8A7790_CLK_VPC0 3
+#define R8A7790_CLK_JPU 6
+#define R8A7790_CLK_SSP1 9
#define R8A7790_CLK_TMU1 11
+#define R8A7790_CLK_3DG 12
+#define R8A7790_CLK_2DDMAC 15
+#define R8A7790_CLK_FDP1_2 17
+#define R8A7790_CLK_FDP1_1 18
+#define R8A7790_CLK_FDP1_0 19
#define R8A7790_CLK_TMU3 21
#define R8A7790_CLK_TMU2 22
#define R8A7790_CLK_CMT0 24
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index 58c3f49..dcececd 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -25,8 +25,15 @@
#define R8A7791_CLK_MSIOF0 0
/* MSTP1 */
-#define R8A7791_CLK_JPU 6
+#define R8A7791_CLK_VCP0 1
+#define R8A7791_CLK_VPC0 3
+#define R8A7791_CLK_JPU 6
+#define R8A7791_CLK_SSP1 9
#define R8A7791_CLK_TMU1 11
+#define R8A7791_CLK_3DG 12
+#define R8A7791_CLK_2DDMAC 15
+#define R8A7791_CLK_FDP1_1 18
+#define R8A7791_CLK_FDP1_0 19
#define R8A7791_CLK_TMU3 21
#define R8A7791_CLK_TMU2 22
#define R8A7791_CLK_CMT0 24
diff --git a/include/dt-bindings/clock/stih407-clks.h b/include/dt-bindings/clock/stih407-clks.h
new file mode 100644
index 0000000..7af2b71
--- /dev/null
+++ b/include/dt-bindings/clock/stih407-clks.h
@@ -0,0 +1,86 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH407
+#define _DT_BINDINGS_CLK_STIH407
+
+/* CLOCKGEN C0 */
+#define CLK_ICN_GPU 0
+#define CLK_FDMA 1
+#define CLK_NAND 2
+#define CLK_HVA 3
+#define CLK_PROC_STFE 4
+#define CLK_PROC_TP 5
+#define CLK_RX_ICN_DMU 6
+#define CLK_RX_ICN_DISP_0 6
+#define CLK_RX_ICN_DISP_1 6
+#define CLK_RX_ICN_HVA 7
+#define CLK_RX_ICN_TS 7
+#define CLK_ICN_CPU 8
+#define CLK_TX_ICN_DMU 9
+#define CLK_TX_ICN_HVA 9
+#define CLK_TX_ICN_TS 9
+#define CLK_ICN_COMPO 9
+#define CLK_MMC_0 10
+#define CLK_MMC_1 11
+#define CLK_JPEGDEC 12
+#define CLK_ICN_REG 13
+#define CLK_TRACE_A9 13
+#define CLK_PTI_STM 13
+#define CLK_EXT2F_A9 13
+#define CLK_IC_BDISP_0 14
+#define CLK_IC_BDISP_1 15
+#define CLK_PP_DMU 16
+#define CLK_VID_DMU 17
+#define CLK_DSS_LPC 18
+#define CLK_ST231_AUD_0 19
+#define CLK_ST231_GP_0 19
+#define CLK_ST231_GP_1 20
+#define CLK_ST231_DMU 21
+#define CLK_ICN_LMI 22
+#define CLK_TX_ICN_DISP_0 23
+#define CLK_TX_ICN_DISP_1 23
+#define CLK_ICN_SBC 24
+#define CLK_STFE_FRC2 25
+#define CLK_ETH_PHY 26
+#define CLK_ETH_REF_PHYCLK 27
+#define CLK_FLASH_PROMIP 28
+#define CLK_MAIN_DISP 29
+#define CLK_AUX_DISP 30
+#define CLK_COMPO_DVP 31
+
+/* CLOCKGEN D0 */
+#define CLK_PCM_0 0
+#define CLK_PCM_1 1
+#define CLK_PCM_2 2
+#define CLK_SPDIFF 3
+
+/* CLOCKGEN D2 */
+#define CLK_PIX_MAIN_DISP 0
+#define CLK_PIX_PIP 1
+#define CLK_PIX_GDP1 2
+#define CLK_PIX_GDP2 3
+#define CLK_PIX_GDP3 4
+#define CLK_PIX_GDP4 5
+#define CLK_PIX_AUX_DISP 6
+#define CLK_DENC 7
+#define CLK_PIX_HDDAC 8
+#define CLK_HDDAC 9
+#define CLK_SDDAC 10
+#define CLK_PIX_DVO 11
+#define CLK_DVO 12
+#define CLK_PIX_HDMI 13
+#define CLK_TMDS_HDMI 14
+#define CLK_REF_HDMIPHY 15
+
+/* CLOCKGEN D3 */
+#define CLK_STFE_FRC1 0
+#define CLK_TSOUT_0 1
+#define CLK_TSOUT_1 2
+#define CLK_MCHI 3
+#define CLK_VSENS_COMPO 4
+#define CLK_FRC1_REMOTE 5
+#define CLK_LPC_0 6
+#define CLK_LPC_1 7
+#endif
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index d6b56b2..801c0ac 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -21,24 +21,24 @@
#define VF610_CLK_FASK_CLK_SEL 8
#define VF610_CLK_AUDIO_EXT 9
#define VF610_CLK_ENET_EXT 10
-#define VF610_CLK_PLL1_MAIN 11
+#define VF610_CLK_PLL1_SYS 11
#define VF610_CLK_PLL1_PFD1 12
#define VF610_CLK_PLL1_PFD2 13
#define VF610_CLK_PLL1_PFD3 14
#define VF610_CLK_PLL1_PFD4 15
-#define VF610_CLK_PLL2_MAIN 16
+#define VF610_CLK_PLL2_BUS 16
#define VF610_CLK_PLL2_PFD1 17
#define VF610_CLK_PLL2_PFD2 18
#define VF610_CLK_PLL2_PFD3 19
#define VF610_CLK_PLL2_PFD4 20
-#define VF610_CLK_PLL3_MAIN 21
+#define VF610_CLK_PLL3_USB_OTG 21
#define VF610_CLK_PLL3_PFD1 22
#define VF610_CLK_PLL3_PFD2 23
#define VF610_CLK_PLL3_PFD3 24
#define VF610_CLK_PLL3_PFD4 25
-#define VF610_CLK_PLL4_MAIN 26
-#define VF610_CLK_PLL5_MAIN 27
-#define VF610_CLK_PLL6_MAIN 28
+#define VF610_CLK_PLL4_AUDIO 26
+#define VF610_CLK_PLL5_ENET 27
+#define VF610_CLK_PLL6_VIDEO 28
#define VF610_CLK_PLL3_MAIN_DIV 29
#define VF610_CLK_PLL4_MAIN_DIV 30
#define VF610_CLK_PLL6_MAIN_DIV 31
@@ -166,9 +166,32 @@
#define VF610_CLK_DMAMUX3 153
#define VF610_CLK_FLEXCAN0_EN 154
#define VF610_CLK_FLEXCAN1_EN 155
-#define VF610_CLK_PLL7_MAIN 156
+#define VF610_CLK_PLL7_USB_HOST 156
#define VF610_CLK_USBPHY0 157
#define VF610_CLK_USBPHY1 158
-#define VF610_CLK_END 159
+#define VF610_CLK_LVDS1_IN 159
+#define VF610_CLK_ANACLK1 160
+#define VF610_CLK_PLL1_BYPASS_SRC 161
+#define VF610_CLK_PLL2_BYPASS_SRC 162
+#define VF610_CLK_PLL3_BYPASS_SRC 163
+#define VF610_CLK_PLL4_BYPASS_SRC 164
+#define VF610_CLK_PLL5_BYPASS_SRC 165
+#define VF610_CLK_PLL6_BYPASS_SRC 166
+#define VF610_CLK_PLL7_BYPASS_SRC 167
+#define VF610_CLK_PLL1 168
+#define VF610_CLK_PLL2 169
+#define VF610_CLK_PLL3 170
+#define VF610_CLK_PLL4 171
+#define VF610_CLK_PLL5 172
+#define VF610_CLK_PLL6 173
+#define VF610_CLK_PLL7 174
+#define VF610_PLL1_BYPASS 175
+#define VF610_PLL2_BYPASS 176
+#define VF610_PLL3_BYPASS 177
+#define VF610_PLL4_BYPASS 178
+#define VF610_PLL5_BYPASS 179
+#define VF610_PLL6_BYPASS 180
+#define VF610_PLL7_BYPASS 181
+#define VF610_CLK_END 182
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h
index e835037..ab6cbba 100644
--- a/include/dt-bindings/dma/at91.h
+++ b/include/dt-bindings/dma/at91.h
@@ -9,6 +9,8 @@
#ifndef __DT_BINDINGS_AT91_DMA_H__
#define __DT_BINDINGS_AT91_DMA_H__
+/* ---------- HDMAC ---------- */
+
/*
* Source and/or destination peripheral ID
*/
@@ -24,4 +26,27 @@
#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */
#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */
+
+/* ---------- XDMAC ---------- */
+#define AT91_XDMAC_DT_MEM_IF_MASK (0x1)
+#define AT91_XDMAC_DT_MEM_IF_OFFSET (13)
+#define AT91_XDMAC_DT_MEM_IF(mem_if) (((mem_if) & AT91_XDMAC_DT_MEM_IF_MASK) \
+ << AT91_XDMAC_DT_MEM_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_MEM_IF(cfg) (((cfg) >> AT91_XDMAC_DT_MEM_IF_OFFSET) \
+ & AT91_XDMAC_DT_MEM_IF_MASK)
+
+#define AT91_XDMAC_DT_PER_IF_MASK (0x1)
+#define AT91_XDMAC_DT_PER_IF_OFFSET (14)
+#define AT91_XDMAC_DT_PER_IF(per_if) (((per_if) & AT91_XDMAC_DT_PER_IF_MASK) \
+ << AT91_XDMAC_DT_PER_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_PER_IF(cfg) (((cfg) >> AT91_XDMAC_DT_PER_IF_OFFSET) \
+ & AT91_XDMAC_DT_PER_IF_MASK)
+
+#define AT91_XDMAC_DT_PERID_MASK (0x7f)
+#define AT91_XDMAC_DT_PERID_OFFSET (24)
+#define AT91_XDMAC_DT_PERID(perid) (((perid) & AT91_XDMAC_DT_PERID_MASK) \
+ << AT91_XDMAC_DT_PERID_OFFSET)
+#define AT91_XDMAC_DT_GET_PERID(cfg) (((cfg) >> AT91_XDMAC_DT_PERID_OFFSET) \
+ & AT91_XDMAC_DT_PERID_MASK)
+
#endif /* __DT_BINDINGS_AT91_DMA_H__ */
diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
new file mode 100644
index 0000000..e8c6a3f
--- /dev/null
+++ b/include/dt-bindings/phy/phy.h
@@ -0,0 +1,18 @@
+/*
+ *
+ * This header provides constants for the phy framework
+ *
+ * Copyright (C) 2014 STMicroelectronics
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com>
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _DT_BINDINGS_PHY
+#define _DT_BINDINGS_PHY
+
+#define PHY_TYPE_SATA 1
+#define PHY_TYPE_PCIE 2
+#define PHY_TYPE_USB2 3
+#define PHY_TYPE_USB3 4
+
+#endif /* _DT_BINDINGS_PHY */
diff --git a/include/dt-bindings/reset-controller/stih407-resets.h b/include/dt-bindings/reset-controller/stih407-resets.h
new file mode 100644
index 0000000..02d4328
--- /dev/null
+++ b/include/dt-bindings/reset-controller/stih407-resets.h
@@ -0,0 +1,61 @@
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
+
+/* Powerdown requests control 0 */
+#define STIH407_EMISS_POWERDOWN 0
+#define STIH407_NAND_POWERDOWN 1
+
+/* Synp GMAC PowerDown */
+#define STIH407_ETH1_POWERDOWN 2
+
+/* Powerdown requests control 1 */
+#define STIH407_USB3_POWERDOWN 3
+#define STIH407_USB2_PORT1_POWERDOWN 4
+#define STIH407_USB2_PORT0_POWERDOWN 5
+#define STIH407_PCIE1_POWERDOWN 6
+#define STIH407_PCIE0_POWERDOWN 7
+#define STIH407_SATA1_POWERDOWN 8
+#define STIH407_SATA0_POWERDOWN 9
+
+/* Reset defines */
+#define STIH407_ETH1_SOFTRESET 0
+#define STIH407_MMC1_SOFTRESET 1
+#define STIH407_PICOPHY_SOFTRESET 2
+#define STIH407_IRB_SOFTRESET 3
+#define STIH407_PCIE0_SOFTRESET 4
+#define STIH407_PCIE1_SOFTRESET 5
+#define STIH407_SATA0_SOFTRESET 6
+#define STIH407_SATA1_SOFTRESET 7
+#define STIH407_MIPHY0_SOFTRESET 8
+#define STIH407_MIPHY1_SOFTRESET 9
+#define STIH407_MIPHY2_SOFTRESET 10
+#define STIH407_SATA0_PWR_SOFTRESET 11
+#define STIH407_SATA1_PWR_SOFTRESET 12
+#define STIH407_DELTA_SOFTRESET 13
+#define STIH407_BLITTER_SOFTRESET 14
+#define STIH407_HDTVOUT_SOFTRESET 15
+#define STIH407_HDQVDP_SOFTRESET 16
+#define STIH407_VDP_AUX_SOFTRESET 17
+#define STIH407_COMPO_SOFTRESET 18
+#define STIH407_HDMI_TX_PHY_SOFTRESET 19
+#define STIH407_JPEG_DEC_SOFTRESET 20
+#define STIH407_VP8_DEC_SOFTRESET 21
+#define STIH407_GPU_SOFTRESET 22
+#define STIH407_HVA_SOFTRESET 23
+#define STIH407_ERAM_HVA_SOFTRESET 24
+#define STIH407_LPM_SOFTRESET 25
+#define STIH407_KEYSCAN_SOFTRESET 26
+#define STIH407_USB2_PORT0_SOFTRESET 27
+#define STIH407_USB2_PORT1_SOFTRESET 28
+
+/* Picophy reset defines */
+#define STIH407_PICOPHY0_RESET 0
+#define STIH407_PICOPHY1_RESET 1
+#define STIH407_PICOPHY2_RESET 2
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */
diff --git a/include/linux/cma.h b/include/linux/cma.h
index 0430ed0..a93438b 100644
--- a/include/linux/cma.h
+++ b/include/linux/cma.h
@@ -18,12 +18,12 @@
extern phys_addr_t cma_get_base(struct cma *cma);
extern unsigned long cma_get_size(struct cma *cma);
-extern int __init cma_declare_contiguous(phys_addr_t size,
- phys_addr_t base, phys_addr_t limit,
+extern int __init cma_declare_contiguous(phys_addr_t base,
+ phys_addr_t size, phys_addr_t limit,
phys_addr_t alignment, unsigned int order_per_bit,
bool fixed, struct cma **res_cma);
-extern int cma_init_reserved_mem(phys_addr_t size,
- phys_addr_t base, int order_per_bit,
+extern int cma_init_reserved_mem(phys_addr_t base,
+ phys_addr_t size, int order_per_bit,
struct cma **res_cma);
extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align);
extern bool cma_release(struct cma *cma, struct page *pages, int count);
diff --git a/include/linux/of.h b/include/linux/of.h
index 6545e7a..29f0adc 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -267,14 +267,12 @@
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
-extern int of_property_read_string_index(struct device_node *np,
- const char *propname,
- int index, const char **output);
extern int of_property_match_string(struct device_node *np,
const char *propname,
const char *string);
-extern int of_property_count_strings(struct device_node *np,
- const char *propname);
+extern int of_property_read_string_helper(struct device_node *np,
+ const char *propname,
+ const char **out_strs, size_t sz, int index);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
@@ -486,15 +484,9 @@
return -ENOSYS;
}
-static inline int of_property_read_string_index(struct device_node *np,
- const char *propname, int index,
- const char **out_string)
-{
- return -ENOSYS;
-}
-
-static inline int of_property_count_strings(struct device_node *np,
- const char *propname)
+static inline int of_property_read_string_helper(struct device_node *np,
+ const char *propname,
+ const char **out_strs, size_t sz, int index)
{
return -ENOSYS;
}
@@ -668,6 +660,70 @@
}
/**
+ * of_property_read_string_array() - Read an array of strings from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_strs: output array of string pointers.
+ * @sz: number of array elements to read.
+ *
+ * Search for a property in a device tree node and retrieve a list of
+ * terminated string values (pointer to data, not a copy) in that property.
+ *
+ * If @out_strs is NULL, the number of strings in the property is returned.
+ */
+static inline int of_property_read_string_array(struct device_node *np,
+ const char *propname, const char **out_strs,
+ size_t sz)
+{
+ return of_property_read_string_helper(np, propname, out_strs, sz, 0);
+}
+
+/**
+ * of_property_count_strings() - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return of_property_read_string_helper(np, propname, NULL, 0, 0);
+}
+
+/**
+ * of_property_read_string_index() - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output)
+{
+ int rc = of_property_read_string_helper(np, propname, output, 1, index);
+ return rc < 0 ? rc : 0;
+}
+
+/**
* of_property_read_bool - Findfrom a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 64dacb7..24c7728 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -41,8 +41,13 @@
if (pci_is_root_bus(pbus))
dev = pbus->bridge;
- else
+ else {
+ /* If pbus is a virtual bus, there is no bridge to it */
+ if (!pbus->self)
+ return NULL;
+
dev = &pbus->self->dev;
+ }
return ACPI_HANDLE(dev);
}
diff --git a/mm/cma.c b/mm/cma.c
index 963bc4a..fde706e 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -124,6 +124,7 @@
err:
kfree(cma->bitmap);
+ cma->count = 0;
return -EINVAL;
}
@@ -217,9 +218,8 @@
phys_addr_t highmem_start = __pa(high_memory);
int ret = 0;
- pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n",
- __func__, (unsigned long)size, (unsigned long)base,
- (unsigned long)limit, (unsigned long)alignment);
+ pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n",
+ __func__, &size, &base, &limit, &alignment);
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
@@ -244,52 +244,72 @@
size = ALIGN(size, alignment);
limit &= ~(alignment - 1);
+ if (!base)
+ fixed = false;
+
/* size should be aligned with order_per_bit */
if (!IS_ALIGNED(size >> PAGE_SHIFT, 1 << order_per_bit))
return -EINVAL;
/*
- * adjust limit to avoid crossing low/high memory boundary for
- * automatically allocated regions
+ * If allocating at a fixed base the request region must not cross the
+ * low/high memory boundary.
*/
- if (((limit == 0 || limit > memblock_end) &&
- (memblock_end - size < highmem_start &&
- memblock_end > highmem_start)) ||
- (!fixed && limit > highmem_start && limit - size < highmem_start)) {
- limit = highmem_start;
- }
-
- if (fixed && base < highmem_start && base+size > highmem_start) {
+ if (fixed && base < highmem_start && base + size > highmem_start) {
ret = -EINVAL;
- pr_err("Region at %08lx defined on low/high memory boundary (%08lx)\n",
- (unsigned long)base, (unsigned long)highmem_start);
+ pr_err("Region at %pa defined on low/high memory boundary (%pa)\n",
+ &base, &highmem_start);
goto err;
}
+ /*
+ * If the limit is unspecified or above the memblock end, its effective
+ * value will be the memblock end. Set it explicitly to simplify further
+ * checks.
+ */
+ if (limit == 0 || limit > memblock_end)
+ limit = memblock_end;
+
/* Reserve memory */
- if (base && fixed) {
+ if (fixed) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
ret = -EBUSY;
goto err;
}
} else {
- phys_addr_t addr = memblock_alloc_range(size, alignment, base,
- limit);
- if (!addr) {
- ret = -ENOMEM;
- goto err;
- } else {
- base = addr;
+ phys_addr_t addr = 0;
+
+ /*
+ * All pages in the reserved area must come from the same zone.
+ * If the requested region crosses the low/high memory boundary,
+ * try allocating from high memory first and fall back to low
+ * memory in case of failure.
+ */
+ if (base < highmem_start && limit > highmem_start) {
+ addr = memblock_alloc_range(size, alignment,
+ highmem_start, limit);
+ limit = highmem_start;
}
+
+ if (!addr) {
+ addr = memblock_alloc_range(size, alignment, base,
+ limit);
+ if (!addr) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ }
+
+ base = addr;
}
ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
if (ret)
goto err;
- pr_info("Reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
- (unsigned long)base);
+ pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
+ &base);
return 0;
err:
diff --git a/mm/truncate.c b/mm/truncate.c
index 261eaf6..f1e4d60 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -715,8 +715,9 @@
* necessary) to @newsize. It will be typically be called from the filesystem's
* setattr function when ATTR_SIZE is passed in.
*
- * Must be called with inode_mutex held and before all filesystem specific
- * block truncation has been performed.
+ * Must be called with a lock serializing truncates and writes (generally
+ * i_mutex but e.g. xfs uses a different lock) and before all filesystem
+ * specific block truncation has been performed.
*/
void truncate_setsize(struct inode *inode, loff_t newsize)
{
@@ -755,7 +756,6 @@
struct page *page;
pgoff_t index;
- WARN_ON(!mutex_is_locked(&inode->i_mutex));
WARN_ON(to > inode->i_size);
if (from >= to || bsize == PAGE_CACHE_SIZE)
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index de6662b..7e38b72 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -149,6 +149,7 @@
struct ceph_crypto_key old_key;
void *ticket_buf = NULL;
void *tp, *tpend;
+ void **ptp;
struct ceph_timespec new_validity;
struct ceph_crypto_key new_session_key;
struct ceph_buffer *new_ticket_blob;
@@ -208,25 +209,19 @@
goto out;
}
tp = ticket_buf;
- dlen = ceph_decode_32(&tp);
+ ptp = &tp;
+ tpend = *ptp + dlen;
} else {
/* unencrypted */
- ceph_decode_32_safe(p, end, dlen, bad);
- ticket_buf = kmalloc(dlen, GFP_NOFS);
- if (!ticket_buf) {
- ret = -ENOMEM;
- goto out;
- }
- tp = ticket_buf;
- ceph_decode_need(p, end, dlen, bad);
- ceph_decode_copy(p, ticket_buf, dlen);
+ ptp = p;
+ tpend = end;
}
- tpend = tp + dlen;
+ ceph_decode_32_safe(ptp, tpend, dlen, bad);
dout(" ticket blob is %d bytes\n", dlen);
- ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
- blob_struct_v = ceph_decode_8(&tp);
- new_secret_id = ceph_decode_64(&tp);
- ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
+ ceph_decode_need(ptp, tpend, 1 + sizeof(u64), bad);
+ blob_struct_v = ceph_decode_8(ptp);
+ new_secret_id = ceph_decode_64(ptp);
+ ret = ceph_decode_buffer(&new_ticket_blob, ptp, tpend);
if (ret)
goto out;
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 559c9f6..8d1653c 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -484,7 +484,7 @@
IPPROTO_TCP, &sock);
if (ret)
return ret;
- sock->sk->sk_allocation = GFP_NOFS;
+ sock->sk->sk_allocation = GFP_NOFS | __GFP_MEMALLOC;
#ifdef CONFIG_LOCKDEP
lockdep_set_class(&sock->sk->sk_lock, &socket_class);
@@ -509,6 +509,9 @@
return ret;
}
+
+ sk_set_memalloc(sock->sk);
+
con->sock = sock;
return 0;
}
@@ -2769,8 +2772,11 @@
{
struct ceph_connection *con = container_of(work, struct ceph_connection,
work.work);
+ unsigned long pflags = current->flags;
bool fault;
+ current->flags |= PF_MEMALLOC;
+
mutex_lock(&con->mutex);
while (true) {
int ret;
@@ -2824,6 +2830,8 @@
con_fault_finish(con);
con->ops->put(con);
+
+ tsk_restore_flags(current, pflags, PF_MEMALLOC);
}
/*
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c9cf248..da03693 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -291,18 +291,14 @@
/* additional initialization for ALC888 variants */
static void alc888_coef_init(struct hda_codec *codec)
{
- if (alc_get_coef0(codec) == 0x20)
- /* alc888S-VC */
- alc_write_coef_idx(codec, 7, 0x830);
- else
- /* alc888-VB */
- alc_write_coef_idx(codec, 7, 0x3030);
-}
-
-/* additional initialization for ALC889 variants */
-static void alc889_coef_init(struct hda_codec *codec)
-{
- alc_update_coef_idx(codec, 7, 0, 0x2010);
+ switch (alc_get_coef0(codec) & 0x00f0) {
+ /* alc888-VA */
+ case 0x00:
+ /* alc888-VB */
+ case 0x10:
+ alc_update_coef_idx(codec, 7, 0, 0x2030); /* Turn EAPD to High */
+ break;
+ }
}
/* turn on/off EAPD control (only if available) */
@@ -359,25 +355,15 @@
case 0x10ec0260:
alc_update_coefex_idx(codec, 0x1a, 7, 0, 0x2010);
break;
- case 0x10ec0262:
case 0x10ec0880:
case 0x10ec0882:
case 0x10ec0883:
case 0x10ec0885:
- case 0x10ec0887:
- /*case 0x10ec0889:*/ /* this causes an SPDIF problem */
- case 0x10ec0900:
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
break;
case 0x10ec0888:
alc888_coef_init(codec);
break;
-#if 0 /* XXX: This may cause the silent output on speaker on some machines */
- case 0x10ec0267:
- case 0x10ec0268:
- alc_update_coef_idx(codec, 7, 0, 0x3000);
- break;
-#endif /* XXX */
}
break;
}
@@ -1710,7 +1696,7 @@
{
if (action != HDA_FIXUP_ACT_INIT)
return;
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
}
/* toggle speaker-output according to the hp-jack state */
@@ -3350,6 +3336,27 @@
}
}
+static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ /* Like hp_gpio_mic1_led, but also needs GPIO4 low to enable headphone amp */
+ struct alc_spec *spec = codec->spec;
+ static const struct hda_verb gpio_init[] = {
+ { 0x01, AC_VERB_SET_GPIO_MASK, 0x18 },
+ { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x18 },
+ {}
+ };
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook;
+ spec->gen.cap_sync_hook = alc269_fixup_hp_cap_mic_mute_hook;
+ spec->gpio_led = 0;
+ spec->cap_mute_led_nid = 0x18;
+ snd_hda_add_verbs(codec, gpio_init);
+ codec->power_filter = led_power_filter;
+ }
+}
+
static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -4217,6 +4224,7 @@
ALC283_FIXUP_BXBT2807_MIC,
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED,
ALC282_FIXUP_ASPIRE_V5_PINS,
+ ALC280_FIXUP_HP_GPIO4,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -4680,7 +4688,10 @@
{ },
},
},
-
+ [ALC280_FIXUP_HP_GPIO4] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc280_fixup_hp_gpio4,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -4728,21 +4739,16 @@
SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x8004, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
/* ALC290 */
SND_PCI_QUIRK(0x103c, 0x221b, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2221, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2225, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2246, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2247, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2248, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2249, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2253, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2254, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2255, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2258, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
@@ -4751,7 +4757,6 @@
SND_PCI_QUIRK(0x103c, 0x2265, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2277, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2278, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x227f, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2282, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
@@ -4804,7 +4809,7 @@
SND_PCI_QUIRK(0x17aa, 0x220e, "Thinkpad T440p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2210, "Thinkpad T540p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK),
- SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
+ SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP),
SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
@@ -4984,6 +4989,19 @@
{0x17, 0x40000000},
{0x1d, 0x40700001},
{0x21, 0x02211040}),
+ SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4,
+ {0x12, 0x90a60130},
+ {0x13, 0x40000000},
+ {0x14, 0x90170110},
+ {0x15, 0x0421101f},
+ {0x16, 0x411111f0},
+ {0x17, 0x411111f0},
+ {0x18, 0x411111f0},
+ {0x19, 0x411111f0},
+ {0x1a, 0x04a11020},
+ {0x1b, 0x411111f0},
+ {0x1d, 0x40748605},
+ {0x1e, 0x411111f0}),
SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED,
{0x12, 0x90a60140},
{0x13, 0x40000000},
@@ -5651,6 +5669,35 @@
}
}
+static struct coef_fw alc668_coefs[] = {
+ WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0),
+ WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80),
+ WRITE_COEF(0x08, 0x0031), WRITE_COEF(0x0a, 0x0060), WRITE_COEF(0x0b, 0x0),
+ WRITE_COEF(0x0c, 0x7cf7), WRITE_COEF(0x0d, 0x1080), WRITE_COEF(0x0e, 0x7f7f),
+ WRITE_COEF(0x0f, 0xcccc), WRITE_COEF(0x10, 0xddcc), WRITE_COEF(0x11, 0x0001),
+ WRITE_COEF(0x13, 0x0), WRITE_COEF(0x14, 0x2aa0), WRITE_COEF(0x17, 0xa940),
+ WRITE_COEF(0x19, 0x0), WRITE_COEF(0x1a, 0x0), WRITE_COEF(0x1b, 0x0),
+ WRITE_COEF(0x1c, 0x0), WRITE_COEF(0x1d, 0x0), WRITE_COEF(0x1e, 0x7418),
+ WRITE_COEF(0x1f, 0x0804), WRITE_COEF(0x20, 0x4200), WRITE_COEF(0x21, 0x0468),
+ WRITE_COEF(0x22, 0x8ccc), WRITE_COEF(0x23, 0x0250), WRITE_COEF(0x24, 0x7418),
+ WRITE_COEF(0x27, 0x0), WRITE_COEF(0x28, 0x8ccc), WRITE_COEF(0x2a, 0xff00),
+ WRITE_COEF(0x2b, 0x8000), WRITE_COEF(0xa7, 0xff00), WRITE_COEF(0xa8, 0x8000),
+ WRITE_COEF(0xaa, 0x2e17), WRITE_COEF(0xab, 0xa0c0), WRITE_COEF(0xac, 0x0),
+ WRITE_COEF(0xad, 0x0), WRITE_COEF(0xae, 0x2ac6), WRITE_COEF(0xaf, 0xa480),
+ WRITE_COEF(0xb0, 0x0), WRITE_COEF(0xb1, 0x0), WRITE_COEF(0xb2, 0x0),
+ WRITE_COEF(0xb3, 0x0), WRITE_COEF(0xb4, 0x0), WRITE_COEF(0xb5, 0x1040),
+ WRITE_COEF(0xb6, 0xd697), WRITE_COEF(0xb7, 0x902b), WRITE_COEF(0xb8, 0xd697),
+ WRITE_COEF(0xb9, 0x902b), WRITE_COEF(0xba, 0xb8ba), WRITE_COEF(0xbb, 0xaaab),
+ WRITE_COEF(0xbc, 0xaaaf), WRITE_COEF(0xbd, 0x6aaa), WRITE_COEF(0xbe, 0x1c02),
+ WRITE_COEF(0xc0, 0x00ff), WRITE_COEF(0xc1, 0x0fa6),
+ {}
+};
+
+static void alc668_restore_default_value(struct hda_codec *codec)
+{
+ alc_process_coef_fw(codec, alc668_coefs);
+}
+
enum {
ALC662_FIXUP_ASPIRE,
ALC662_FIXUP_LED_GPIO1,
@@ -6118,8 +6165,15 @@
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- spec->init_hook = alc662_fill_coef;
- alc662_fill_coef(codec);
+ switch (codec->vendor_id) {
+ case 0x10ec0668:
+ spec->init_hook = alc668_restore_default_value;
+ break;
+ default:
+ spec->init_hook = alc662_fill_coef;
+ alc662_fill_coef(codec);
+ break;
+ }
snd_hda_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 7ecd0e8..f61ebb1 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -591,18 +591,19 @@
{
struct snd_card *card;
struct list_head *p;
+ bool was_shutdown;
if (chip == (void *)-1L)
return;
card = chip->card;
down_write(&chip->shutdown_rwsem);
+ was_shutdown = chip->shutdown;
chip->shutdown = 1;
up_write(&chip->shutdown_rwsem);
mutex_lock(®ister_mutex);
- chip->num_interfaces--;
- if (chip->num_interfaces <= 0) {
+ if (!was_shutdown) {
struct snd_usb_endpoint *ep;
snd_card_disconnect(card);
@@ -622,6 +623,10 @@
list_for_each(p, &chip->mixer_list) {
snd_usb_mixer_disconnect(p);
}
+ }
+
+ chip->num_interfaces--;
+ if (chip->num_interfaces <= 0) {
usb_chip[chip->index] = NULL;
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index a8f81c7..5152476 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -82,7 +82,7 @@
}
# Parameters
-DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' '`
+DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' ' | head -1`
TRACING_DIR=$DEBUGFS_DIR/tracing
TOP_DIR=`absdir $0`
TEST_DIR=$TOP_DIR/test.d
