| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * linux/fs/file.c | |
| * | |
| * Copyright (C) 1998-1999, Stephen Tweedie and Bill Hawes | |
| * | |
| * Manage the dynamic fd arrays in the process files_struct. | |
| */ | |
| #include <linux/syscalls.h> | |
| #include <linux/export.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/slab.h> | |
| #include <linux/file.h> | |
| #include <linux/fdtable.h> | |
| #include <linux/bitops.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/close_range.h> | |
| #include <linux/file_ref.h> | |
| #include <net/sock.h> | |
| #include <linux/init_task.h> | |
| #include "internal.h" | |
| static noinline bool __file_ref_put_badval(file_ref_t *ref, unsigned long cnt) | |
| { | |
| /* | |
| * If the reference count was already in the dead zone, then this | |
| * put() operation is imbalanced. Warn, put the reference count back to | |
| * DEAD and tell the caller to not deconstruct the object. | |
| */ | |
| if (WARN_ONCE(cnt >= FILE_REF_RELEASED, "imbalanced put on file reference count")) { | |
| atomic_long_set(&ref->refcnt, FILE_REF_DEAD); | |
| return false; | |
| } | |
| /* | |
| * This is a put() operation on a saturated refcount. Restore the | |
| * mean saturation value and tell the caller to not deconstruct the | |
| * object. | |
| */ | |
| if (cnt > FILE_REF_MAXREF) | |
| atomic_long_set(&ref->refcnt, FILE_REF_SATURATED); | |
| return false; | |
| } | |
| /** | |
| * __file_ref_put - Slowpath of file_ref_put() | |
| * @ref: Pointer to the reference count | |
| * @cnt: Current reference count | |
| * | |
| * Invoked when the reference count is outside of the valid zone. | |
| * | |
| * Return: | |
| * True if this was the last reference with no future references | |
| * possible. This signals the caller that it can safely schedule the | |
| * object, which is protected by the reference counter, for | |
| * deconstruction. | |
| * | |
| * False if there are still active references or the put() raced | |
| * with a concurrent get()/put() pair. Caller is not allowed to | |
| * deconstruct the protected object. | |
| */ | |
| bool __file_ref_put(file_ref_t *ref, unsigned long cnt) | |
| { | |
| /* Did this drop the last reference? */ | |
| if (likely(cnt == FILE_REF_NOREF)) { | |
| /* | |
| * Carefully try to set the reference count to FILE_REF_DEAD. | |
| * | |
| * This can fail if a concurrent get() operation has | |
| * elevated it again or the corresponding put() even marked | |
| * it dead already. Both are valid situations and do not | |
| * require a retry. If this fails the caller is not | |
| * allowed to deconstruct the object. | |
| */ | |
| if (!atomic_long_try_cmpxchg_release(&ref->refcnt, &cnt, FILE_REF_DEAD)) | |
| return false; | |
| /* | |
| * The caller can safely schedule the object for | |
| * deconstruction. Provide acquire ordering. | |
| */ | |
| smp_acquire__after_ctrl_dep(); | |
| return true; | |
| } | |
| return __file_ref_put_badval(ref, cnt); | |
| } | |
| EXPORT_SYMBOL_GPL(__file_ref_put); | |
| unsigned int sysctl_nr_open __read_mostly = 1024*1024; | |
| unsigned int sysctl_nr_open_min = BITS_PER_LONG; | |
| /* our min() is unusable in constant expressions ;-/ */ | |
| #define __const_min(x, y) ((x) < (y) ? (x) : (y)) | |
| unsigned int sysctl_nr_open_max = | |
| __const_min(INT_MAX, ~(size_t)0/sizeof(void *)) & -BITS_PER_LONG; | |
| static void __free_fdtable(struct fdtable *fdt) | |
| { | |
| kvfree(fdt->fd); | |
| kvfree(fdt->open_fds); | |
| kfree(fdt); | |
| } | |
| static void free_fdtable_rcu(struct rcu_head *rcu) | |
| { | |
| __free_fdtable(container_of(rcu, struct fdtable, rcu)); | |
| } | |
| #define BITBIT_NR(nr) BITS_TO_LONGS(BITS_TO_LONGS(nr)) | |
| #define BITBIT_SIZE(nr) (BITBIT_NR(nr) * sizeof(long)) | |
| #define fdt_words(fdt) ((fdt)->max_fds / BITS_PER_LONG) // words in ->open_fds | |
| /* | |
| * Copy 'count' fd bits from the old table to the new table and clear the extra | |
| * space if any. This does not copy the file pointers. Called with the files | |
| * spinlock held for write. | |
| */ | |
| static inline void copy_fd_bitmaps(struct fdtable *nfdt, struct fdtable *ofdt, | |
| unsigned int copy_words) | |
| { | |
| unsigned int nwords = fdt_words(nfdt); | |
| bitmap_copy_and_extend(nfdt->open_fds, ofdt->open_fds, | |
| copy_words * BITS_PER_LONG, nwords * BITS_PER_LONG); | |
| bitmap_copy_and_extend(nfdt->close_on_exec, ofdt->close_on_exec, | |
| copy_words * BITS_PER_LONG, nwords * BITS_PER_LONG); | |
| bitmap_copy_and_extend(nfdt->full_fds_bits, ofdt->full_fds_bits, | |
| copy_words, nwords); | |
| } | |
| /* | |
| * Copy all file descriptors from the old table to the new, expanded table and | |
| * clear the extra space. Called with the files spinlock held for write. | |
| */ | |
| static void copy_fdtable(struct fdtable *nfdt, struct fdtable *ofdt) | |
| { | |
| size_t cpy, set; | |
| BUG_ON(nfdt->max_fds < ofdt->max_fds); | |
| cpy = ofdt->max_fds * sizeof(struct file *); | |
| set = (nfdt->max_fds - ofdt->max_fds) * sizeof(struct file *); | |
| memcpy(nfdt->fd, ofdt->fd, cpy); | |
| memset((char *)nfdt->fd + cpy, 0, set); | |
| copy_fd_bitmaps(nfdt, ofdt, fdt_words(ofdt)); | |
| } | |
| /* | |
| * Note how the fdtable bitmap allocations very much have to be a multiple of | |
| * BITS_PER_LONG. This is not only because we walk those things in chunks of | |
| * 'unsigned long' in some places, but simply because that is how the Linux | |
| * kernel bitmaps are defined to work: they are not "bits in an array of bytes", | |
| * they are very much "bits in an array of unsigned long". | |
| */ | |
| static struct fdtable *alloc_fdtable(unsigned int slots_wanted) | |
| { | |
| struct fdtable *fdt; | |
| unsigned int nr; | |
| void *data; | |
| /* | |
| * Figure out how many fds we actually want to support in this fdtable. | |
| * Allocation steps are keyed to the size of the fdarray, since it | |
| * grows far faster than any of the other dynamic data. We try to fit | |
| * the fdarray into comfortable page-tuned chunks: starting at 1024B | |
| * and growing in powers of two from there on. Since we called only | |
| * with slots_wanted > BITS_PER_LONG (embedded instance in files->fdtab | |
| * already gives BITS_PER_LONG slots), the above boils down to | |
| * 1. use the smallest power of two large enough to give us that many | |
| * slots. | |
| * 2. on 32bit skip 64 and 128 - the minimal capacity we want there is | |
| * 256 slots (i.e. 1Kb fd array). | |
| * 3. on 64bit don't skip anything, 1Kb fd array means 128 slots there | |
| * and we are never going to be asked for 64 or less. | |
| */ | |
| if (IS_ENABLED(CONFIG_32BIT) && slots_wanted < 256) | |
| nr = 256; | |
| else | |
| nr = roundup_pow_of_two(slots_wanted); | |
| /* | |
| * Note that this can drive nr *below* what we had passed if sysctl_nr_open | |
| * had been set lower between the check in expand_files() and here. | |
| * | |
| * We make sure that nr remains a multiple of BITS_PER_LONG - otherwise | |
| * bitmaps handling below becomes unpleasant, to put it mildly... | |
| */ | |
| if (unlikely(nr > sysctl_nr_open)) { | |
| nr = round_down(sysctl_nr_open, BITS_PER_LONG); | |
| if (nr < slots_wanted) | |
| return ERR_PTR(-EMFILE); | |
| } | |
| /* | |
| * Check if the allocation size would exceed INT_MAX. kvmalloc_array() | |
| * and kvmalloc() will warn if the allocation size is greater than | |
| * INT_MAX, as filp_cache objects are not __GFP_NOWARN. | |
| * | |
| * This can happen when sysctl_nr_open is set to a very high value and | |
| * a process tries to use a file descriptor near that limit. For example, | |
| * if sysctl_nr_open is set to 1073741816 (0x3ffffff8) - which is what | |
| * systemd typically sets it to - then trying to use a file descriptor | |
| * close to that value will require allocating a file descriptor table | |
| * that exceeds 8GB in size. | |
| */ | |
| if (unlikely(nr > INT_MAX / sizeof(struct file *))) | |
| return ERR_PTR(-EMFILE); | |
| fdt = kmalloc_obj(struct fdtable, GFP_KERNEL_ACCOUNT); | |
| if (!fdt) | |
| goto out; | |
| fdt->max_fds = nr; | |
| data = kvmalloc_objs(struct file *, nr, GFP_KERNEL_ACCOUNT); | |
| if (!data) | |
| goto out_fdt; | |
| fdt->fd = data; | |
| data = kvmalloc(max_t(size_t, | |
| 2 * nr / BITS_PER_BYTE + BITBIT_SIZE(nr), L1_CACHE_BYTES), | |
| GFP_KERNEL_ACCOUNT); | |
| if (!data) | |
| goto out_arr; | |
| fdt->open_fds = data; | |
| data += nr / BITS_PER_BYTE; | |
| fdt->close_on_exec = data; | |
| data += nr / BITS_PER_BYTE; | |
| fdt->full_fds_bits = data; | |
| return fdt; | |
| out_arr: | |
| kvfree(fdt->fd); | |
| out_fdt: | |
| kfree(fdt); | |
| out: | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| /* | |
| * Expand the file descriptor table. | |
| * This function will allocate a new fdtable and both fd array and fdset, of | |
| * the given size. | |
| * Return <0 error code on error; 0 on successful completion. | |
| * The files->file_lock should be held on entry, and will be held on exit. | |
| */ | |
| static int expand_fdtable(struct files_struct *files, unsigned int nr) | |
| __releases(files->file_lock) | |
| __acquires(files->file_lock) | |
| { | |
| struct fdtable *new_fdt, *cur_fdt; | |
| spin_unlock(&files->file_lock); | |
| new_fdt = alloc_fdtable(nr + 1); | |
| /* make sure all fd_install() have seen resize_in_progress | |
| * or have finished their rcu_read_lock_sched() section. | |
| */ | |
| if (atomic_read(&files->count) > 1) | |
| synchronize_rcu(); | |
| spin_lock(&files->file_lock); | |
| if (IS_ERR(new_fdt)) | |
| return PTR_ERR(new_fdt); | |
| cur_fdt = files_fdtable(files); | |
| BUG_ON(nr < cur_fdt->max_fds); | |
| copy_fdtable(new_fdt, cur_fdt); | |
| rcu_assign_pointer(files->fdt, new_fdt); | |
| if (cur_fdt != &files->fdtab) | |
| call_rcu(&cur_fdt->rcu, free_fdtable_rcu); | |
| /* coupled with smp_rmb() in fd_install() */ | |
| smp_wmb(); | |
| return 0; | |
| } | |
| /* | |
| * Expand files. | |
| * This function will expand the file structures, if the requested size exceeds | |
| * the current capacity and there is room for expansion. | |
| * Return <0 error code on error; 0 on success. | |
| * The files->file_lock should be held on entry, and will be held on exit. | |
| */ | |
| static int expand_files(struct files_struct *files, unsigned int nr) | |
| __releases(files->file_lock) | |
| __acquires(files->file_lock) | |
| { | |
| struct fdtable *fdt; | |
| int error; | |
| repeat: | |
| fdt = files_fdtable(files); | |
| /* Do we need to expand? */ | |
| if (nr < fdt->max_fds) | |
| return 0; | |
| if (unlikely(files->resize_in_progress)) { | |
| spin_unlock(&files->file_lock); | |
| wait_event(files->resize_wait, !files->resize_in_progress); | |
| spin_lock(&files->file_lock); | |
| goto repeat; | |
| } | |
| /* Can we expand? */ | |
| if (unlikely(nr >= sysctl_nr_open)) | |
| return -EMFILE; | |
| /* All good, so we try */ | |
| files->resize_in_progress = true; | |
| error = expand_fdtable(files, nr); | |
| files->resize_in_progress = false; | |
| wake_up_all(&files->resize_wait); | |
| return error; | |
| } | |
| static inline void __set_close_on_exec(unsigned int fd, struct fdtable *fdt, | |
| bool set) | |
| { | |
| if (set) { | |
| __set_bit(fd, fdt->close_on_exec); | |
| } else { | |
| if (test_bit(fd, fdt->close_on_exec)) | |
| __clear_bit(fd, fdt->close_on_exec); | |
| } | |
| } | |
| static inline void __set_open_fd(unsigned int fd, struct fdtable *fdt, bool set) | |
| { | |
| __set_bit(fd, fdt->open_fds); | |
| __set_close_on_exec(fd, fdt, set); | |
| fd /= BITS_PER_LONG; | |
| if (!~fdt->open_fds[fd]) | |
| __set_bit(fd, fdt->full_fds_bits); | |
| } | |
| static inline void __clear_open_fd(unsigned int fd, struct fdtable *fdt) | |
| { | |
| __clear_bit(fd, fdt->open_fds); | |
| fd /= BITS_PER_LONG; | |
| if (test_bit(fd, fdt->full_fds_bits)) | |
| __clear_bit(fd, fdt->full_fds_bits); | |
| } | |
| static inline bool fd_is_open(unsigned int fd, const struct fdtable *fdt) | |
| { | |
| return test_bit(fd, fdt->open_fds); | |
| } | |
| /* | |
| * Note that a sane fdtable size always has to be a multiple of | |
| * BITS_PER_LONG, since we have bitmaps that are sized by this. | |
| * | |
| * punch_hole is optional - when close_range() is asked to unshare | |
| * and close, we don't need to copy descriptors in that range, so | |
| * a smaller cloned descriptor table might suffice if the last | |
| * currently opened descriptor falls into that range. | |
| */ | |
| static unsigned int sane_fdtable_size(struct fdtable *fdt, struct fd_range *punch_hole) | |
| { | |
| unsigned int last = find_last_bit(fdt->open_fds, fdt->max_fds); | |
| if (last == fdt->max_fds) | |
| return NR_OPEN_DEFAULT; | |
| if (punch_hole && punch_hole->to >= last && punch_hole->from <= last) { | |
| last = find_last_bit(fdt->open_fds, punch_hole->from); | |
| if (last == punch_hole->from) | |
| return NR_OPEN_DEFAULT; | |
| } | |
| return ALIGN(last + 1, BITS_PER_LONG); | |
| } | |
| /* | |
| * Allocate a new descriptor table and copy contents from the passed in | |
| * instance. Returns a pointer to cloned table on success, ERR_PTR() | |
| * on failure. For 'punch_hole' see sane_fdtable_size(). | |
| */ | |
| struct files_struct *dup_fd(struct files_struct *oldf, struct fd_range *punch_hole) | |
| { | |
| struct files_struct *newf; | |
| struct file **old_fds, **new_fds; | |
| unsigned int open_files, i; | |
| struct fdtable *old_fdt, *new_fdt; | |
| newf = kmem_cache_alloc(files_cachep, GFP_KERNEL); | |
| if (!newf) | |
| return ERR_PTR(-ENOMEM); | |
| atomic_set(&newf->count, 1); | |
| spin_lock_init(&newf->file_lock); | |
| newf->resize_in_progress = false; | |
| init_waitqueue_head(&newf->resize_wait); | |
| newf->next_fd = 0; | |
| new_fdt = &newf->fdtab; | |
| new_fdt->max_fds = NR_OPEN_DEFAULT; | |
| new_fdt->close_on_exec = newf->close_on_exec_init; | |
| new_fdt->open_fds = newf->open_fds_init; | |
| new_fdt->full_fds_bits = newf->full_fds_bits_init; | |
| new_fdt->fd = &newf->fd_array[0]; | |
| spin_lock(&oldf->file_lock); | |
| old_fdt = files_fdtable(oldf); | |
| open_files = sane_fdtable_size(old_fdt, punch_hole); | |
| /* | |
| * Check whether we need to allocate a larger fd array and fd set. | |
| */ | |
| while (unlikely(open_files > new_fdt->max_fds)) { | |
| spin_unlock(&oldf->file_lock); | |
| if (new_fdt != &newf->fdtab) | |
| __free_fdtable(new_fdt); | |
| new_fdt = alloc_fdtable(open_files); | |
| if (IS_ERR(new_fdt)) { | |
| kmem_cache_free(files_cachep, newf); | |
| return ERR_CAST(new_fdt); | |
| } | |
| /* | |
| * Reacquire the oldf lock and a pointer to its fd table | |
| * who knows it may have a new bigger fd table. We need | |
| * the latest pointer. | |
| */ | |
| spin_lock(&oldf->file_lock); | |
| old_fdt = files_fdtable(oldf); | |
| open_files = sane_fdtable_size(old_fdt, punch_hole); | |
| } | |
| copy_fd_bitmaps(new_fdt, old_fdt, open_files / BITS_PER_LONG); | |
| old_fds = old_fdt->fd; | |
| new_fds = new_fdt->fd; | |
| /* | |
| * We may be racing against fd allocation from other threads using this | |
| * files_struct, despite holding ->file_lock. | |
| * | |
| * alloc_fd() might have already claimed a slot, while fd_install() | |
| * did not populate it yet. Note the latter operates locklessly, so | |
| * the file can show up as we are walking the array below. | |
| * | |
| * At the same time we know no files will disappear as all other | |
| * operations take the lock. | |
| * | |
| * Instead of trying to placate userspace racing with itself, we | |
| * ref the file if we see it and mark the fd slot as unused otherwise. | |
| */ | |
| for (i = open_files; i != 0; i--) { | |
| struct file *f = rcu_dereference_raw(*old_fds++); | |
| if (f) { | |
| get_file(f); | |
| } else { | |
| __clear_open_fd(open_files - i, new_fdt); | |
| } | |
| rcu_assign_pointer(*new_fds++, f); | |
| } | |
| spin_unlock(&oldf->file_lock); | |
| /* clear the remainder */ | |
| memset(new_fds, 0, (new_fdt->max_fds - open_files) * sizeof(struct file *)); | |
| rcu_assign_pointer(newf->fdt, new_fdt); | |
| return newf; | |
| } | |
| static struct fdtable *close_files(struct files_struct * files) | |
| { | |
| /* | |
| * It is safe to dereference the fd table without RCU or | |
| * ->file_lock because this is the last reference to the | |
| * files structure. | |
| */ | |
| struct fdtable *fdt = rcu_dereference_raw(files->fdt); | |
| unsigned int i, j = 0; | |
| for (;;) { | |
| unsigned long set; | |
| i = j * BITS_PER_LONG; | |
| if (i >= fdt->max_fds) | |
| break; | |
| set = fdt->open_fds[j++]; | |
| while (set) { | |
| if (set & 1) { | |
| struct file *file = fdt->fd[i]; | |
| if (file) { | |
| filp_close(file, files); | |
| cond_resched(); | |
| } | |
| } | |
| i++; | |
| set >>= 1; | |
| } | |
| } | |
| return fdt; | |
| } | |
| void put_files_struct(struct files_struct *files) | |
| { | |
| if (atomic_dec_and_test(&files->count)) { | |
| struct fdtable *fdt = close_files(files); | |
| /* free the arrays if they are not embedded */ | |
| if (fdt != &files->fdtab) | |
| __free_fdtable(fdt); | |
| kmem_cache_free(files_cachep, files); | |
| } | |
| } | |
| void exit_files(struct task_struct *tsk) | |
| { | |
| struct files_struct * files = tsk->files; | |
| if (files) { | |
| task_lock(tsk); | |
| tsk->files = NULL; | |
| task_unlock(tsk); | |
| put_files_struct(files); | |
| } | |
| } | |
| struct files_struct init_files = { | |
| .count = ATOMIC_INIT(1), | |
| .fdt = &init_files.fdtab, | |
| .fdtab = { | |
| .max_fds = NR_OPEN_DEFAULT, | |
| .fd = &init_files.fd_array[0], | |
| .close_on_exec = init_files.close_on_exec_init, | |
| .open_fds = init_files.open_fds_init, | |
| .full_fds_bits = init_files.full_fds_bits_init, | |
| }, | |
| .file_lock = __SPIN_LOCK_UNLOCKED(init_files.file_lock), | |
| .resize_wait = __WAIT_QUEUE_HEAD_INITIALIZER(init_files.resize_wait), | |
| }; | |
| static unsigned int find_next_fd(struct fdtable *fdt, unsigned int start) | |
| { | |
| unsigned int maxfd = fdt->max_fds; /* always multiple of BITS_PER_LONG */ | |
| unsigned int max_fds_words = maxfd / BITS_PER_LONG; | |
| unsigned int fds_word_idx = start / BITS_PER_LONG; | |
| unsigned int bit; | |
| /* | |
| * Try to avoid looking at the second level bitmap | |
| */ | |
| bit = find_next_zero_bit(&fdt->open_fds[fds_word_idx], BITS_PER_LONG, | |
| start & (BITS_PER_LONG - 1)); | |
| if (bit < BITS_PER_LONG) | |
| return bit + (fds_word_idx * BITS_PER_LONG); | |
| bit = BITS_PER_LONG * | |
| find_next_zero_bit(fdt->full_fds_bits, max_fds_words, fds_word_idx + 1); | |
| if (bit >= maxfd) | |
| return maxfd; | |
| return find_next_zero_bit(fdt->open_fds, maxfd, bit); | |
| } | |
| /* | |
| * allocate a file descriptor, mark it busy. | |
| */ | |
| static int alloc_fd(unsigned start, unsigned end, unsigned flags) | |
| { | |
| struct files_struct *files = current->files; | |
| unsigned int fd; | |
| int error; | |
| struct fdtable *fdt; | |
| spin_lock(&files->file_lock); | |
| repeat: | |
| fdt = files_fdtable(files); | |
| fd = start; | |
| if (fd < files->next_fd) | |
| fd = files->next_fd; | |
| if (likely(fd < fdt->max_fds)) | |
| fd = find_next_fd(fdt, fd); | |
| /* | |
| * N.B. For clone tasks sharing a files structure, this test | |
| * will limit the total number of files that can be opened. | |
| */ | |
| error = -EMFILE; | |
| if (unlikely(fd >= end)) | |
| goto out; | |
| if (unlikely(fd >= fdt->max_fds)) { | |
| error = expand_files(files, fd); | |
| if (error < 0) | |
| goto out; | |
| goto repeat; | |
| } | |
| if (start <= files->next_fd) | |
| files->next_fd = fd + 1; | |
| __set_open_fd(fd, fdt, flags & O_CLOEXEC); | |
| error = fd; | |
| VFS_BUG_ON(rcu_access_pointer(fdt->fd[fd]) != NULL); | |
| out: | |
| spin_unlock(&files->file_lock); | |
| return error; | |
| } | |
| int __get_unused_fd_flags(unsigned flags, unsigned long nofile) | |
| { | |
| return alloc_fd(0, nofile, flags); | |
| } | |
| int get_unused_fd_flags(unsigned flags) | |
| { | |
| return __get_unused_fd_flags(flags, rlimit(RLIMIT_NOFILE)); | |
| } | |
| EXPORT_SYMBOL(get_unused_fd_flags); | |
| static void __put_unused_fd(struct files_struct *files, unsigned int fd) | |
| { | |
| struct fdtable *fdt = files_fdtable(files); | |
| __clear_open_fd(fd, fdt); | |
| if (fd < files->next_fd) | |
| files->next_fd = fd; | |
| } | |
| void put_unused_fd(unsigned int fd) | |
| { | |
| struct files_struct *files = current->files; | |
| spin_lock(&files->file_lock); | |
| __put_unused_fd(files, fd); | |
| spin_unlock(&files->file_lock); | |
| } | |
| EXPORT_SYMBOL(put_unused_fd); | |
| /* | |
| * Install a file pointer in the fd array while it is being resized. | |
| * | |
| * We need to make sure our update to the array does not get lost as the resizing | |
| * thread can be copying the content as we modify it. | |
| * | |
| * We have two ways to do it: | |
| * - go off CPU waiting for resize_in_progress to clear | |
| * - take the spin lock | |
| * | |
| * The latter is trivial to implement and saves us from having to might_sleep() | |
| * for debugging purposes. | |
| * | |
| * This is moved out of line from fd_install() to convince gcc to optimize that | |
| * routine better. | |
| */ | |
| static void noinline fd_install_slowpath(unsigned int fd, struct file *file) | |
| { | |
| struct files_struct *files = current->files; | |
| struct fdtable *fdt; | |
| spin_lock(&files->file_lock); | |
| fdt = files_fdtable(files); | |
| VFS_BUG_ON(rcu_access_pointer(fdt->fd[fd]) != NULL); | |
| rcu_assign_pointer(fdt->fd[fd], file); | |
| spin_unlock(&files->file_lock); | |
| } | |
| /** | |
| * fd_install - install a file pointer in the fd array | |
| * @fd: file descriptor to install the file in | |
| * @file: the file to install | |
| * | |
| * This consumes the "file" refcount, so callers should treat it | |
| * as if they had called fput(file). | |
| */ | |
| void fd_install(unsigned int fd, struct file *file) | |
| { | |
| struct files_struct *files = current->files; | |
| struct fdtable *fdt; | |
| if (WARN_ON_ONCE(unlikely(file->f_mode & FMODE_BACKING))) | |
| return; | |
| rcu_read_lock_sched(); | |
| if (unlikely(files->resize_in_progress)) { | |
| rcu_read_unlock_sched(); | |
| fd_install_slowpath(fd, file); | |
| return; | |
| } | |
| /* coupled with smp_wmb() in expand_fdtable() */ | |
| smp_rmb(); | |
| fdt = rcu_dereference_sched(files->fdt); | |
| VFS_BUG_ON(rcu_access_pointer(fdt->fd[fd]) != NULL); | |
| rcu_assign_pointer(fdt->fd[fd], file); | |
| rcu_read_unlock_sched(); | |
| } | |
| EXPORT_SYMBOL(fd_install); | |
| /** | |
| * file_close_fd_locked - return file associated with fd | |
| * @files: file struct to retrieve file from | |
| * @fd: file descriptor to retrieve file for | |
| * | |
| * Doesn't take a separate reference count. | |
| * | |
| * Context: files_lock must be held. | |
| * | |
| * Returns: The file associated with @fd (NULL if @fd is not open) | |
| */ | |
| struct file *file_close_fd_locked(struct files_struct *files, unsigned fd) | |
| { | |
| struct fdtable *fdt = files_fdtable(files); | |
| struct file *file; | |
| lockdep_assert_held(&files->file_lock); | |
| if (fd >= fdt->max_fds) | |
| return NULL; | |
| fd = array_index_nospec(fd, fdt->max_fds); | |
| file = rcu_dereference_raw(fdt->fd[fd]); | |
| if (file) { | |
| rcu_assign_pointer(fdt->fd[fd], NULL); | |
| __put_unused_fd(files, fd); | |
| } | |
| return file; | |
| } | |
| int close_fd(unsigned fd) | |
| { | |
| struct files_struct *files = current->files; | |
| struct file *file; | |
| spin_lock(&files->file_lock); | |
| file = file_close_fd_locked(files, fd); | |
| spin_unlock(&files->file_lock); | |
| if (!file) | |
| return -EBADF; | |
| return filp_close(file, files); | |
| } | |
| EXPORT_SYMBOL(close_fd); | |
| /** | |
| * last_fd - return last valid index into fd table | |
| * @fdt: File descriptor table. | |
| * | |
| * Context: Either rcu read lock or files_lock must be held. | |
| * | |
| * Returns: Last valid index into fdtable. | |
| */ | |
| static inline unsigned last_fd(struct fdtable *fdt) | |
| { | |
| return fdt->max_fds - 1; | |
| } | |
| static inline void __range_cloexec(struct files_struct *cur_fds, | |
| unsigned int fd, unsigned int max_fd) | |
| { | |
| struct fdtable *fdt; | |
| /* make sure we're using the correct maximum value */ | |
| spin_lock(&cur_fds->file_lock); | |
| fdt = files_fdtable(cur_fds); | |
| max_fd = min(last_fd(fdt), max_fd); | |
| if (fd <= max_fd) | |
| bitmap_set(fdt->close_on_exec, fd, max_fd - fd + 1); | |
| spin_unlock(&cur_fds->file_lock); | |
| } | |
| static inline void __range_close(struct files_struct *files, unsigned int fd, | |
| unsigned int max_fd) | |
| { | |
| struct file *file; | |
| struct fdtable *fdt; | |
| unsigned n; | |
| spin_lock(&files->file_lock); | |
| fdt = files_fdtable(files); | |
| n = last_fd(fdt); | |
| max_fd = min(max_fd, n); | |
| for (fd = find_next_bit(fdt->open_fds, max_fd + 1, fd); | |
| fd <= max_fd; | |
| fd = find_next_bit(fdt->open_fds, max_fd + 1, fd + 1)) { | |
| file = file_close_fd_locked(files, fd); | |
| if (file) { | |
| spin_unlock(&files->file_lock); | |
| filp_close(file, files); | |
| cond_resched(); | |
| spin_lock(&files->file_lock); | |
| fdt = files_fdtable(files); | |
| } else if (need_resched()) { | |
| spin_unlock(&files->file_lock); | |
| cond_resched(); | |
| spin_lock(&files->file_lock); | |
| fdt = files_fdtable(files); | |
| } | |
| } | |
| spin_unlock(&files->file_lock); | |
| } | |
| /** | |
| * sys_close_range() - Close all file descriptors in a given range. | |
| * | |
| * @fd: starting file descriptor to close | |
| * @max_fd: last file descriptor to close | |
| * @flags: CLOSE_RANGE flags. | |
| * | |
| * This closes a range of file descriptors. All file descriptors | |
| * from @fd up to and including @max_fd are closed. | |
| * Currently, errors to close a given file descriptor are ignored. | |
| */ | |
| SYSCALL_DEFINE3(close_range, unsigned int, fd, unsigned int, max_fd, | |
| unsigned int, flags) | |
| { | |
| struct task_struct *me = current; | |
| struct files_struct *cur_fds = me->files, *fds = NULL; | |
| if (flags & ~(CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC)) | |
| return -EINVAL; | |
| if (fd > max_fd) | |
| return -EINVAL; | |
| if ((flags & CLOSE_RANGE_UNSHARE) && atomic_read(&cur_fds->count) > 1) { | |
| struct fd_range range = {fd, max_fd}, *punch_hole = ⦥ | |
| /* | |
| * If the caller requested all fds to be made cloexec we always | |
| * copy all of the file descriptors since they still want to | |
| * use them. | |
| */ | |
| if (flags & CLOSE_RANGE_CLOEXEC) | |
| punch_hole = NULL; | |
| fds = dup_fd(cur_fds, punch_hole); | |
| if (IS_ERR(fds)) | |
| return PTR_ERR(fds); | |
| /* | |
| * We used to share our file descriptor table, and have now | |
| * created a private one, make sure we're using it below. | |
| */ | |
| swap(cur_fds, fds); | |
| } | |
| if (flags & CLOSE_RANGE_CLOEXEC) | |
| __range_cloexec(cur_fds, fd, max_fd); | |
| else | |
| __range_close(cur_fds, fd, max_fd); | |
| if (fds) { | |
| /* | |
| * We're done closing the files we were supposed to. Time to install | |
| * the new file descriptor table and drop the old one. | |
| */ | |
| task_lock(me); | |
| me->files = cur_fds; | |
| task_unlock(me); | |
| put_files_struct(fds); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * file_close_fd - return file associated with fd | |
| * @fd: file descriptor to retrieve file for | |
| * | |
| * Doesn't take a separate reference count. | |
| * | |
| * Returns: The file associated with @fd (NULL if @fd is not open) | |
| */ | |
| struct file *file_close_fd(unsigned int fd) | |
| { | |
| struct files_struct *files = current->files; | |
| struct file *file; | |
| spin_lock(&files->file_lock); | |
| file = file_close_fd_locked(files, fd); | |
| spin_unlock(&files->file_lock); | |
| return file; | |
| } | |
| void do_close_on_exec(struct files_struct *files) | |
| { | |
| unsigned i; | |
| struct fdtable *fdt; | |
| /* exec unshares first */ | |
| spin_lock(&files->file_lock); | |
| for (i = 0; ; i++) { | |
| unsigned long set; | |
| unsigned fd = i * BITS_PER_LONG; | |
| fdt = files_fdtable(files); | |
| if (fd >= fdt->max_fds) | |
| break; | |
| set = fdt->close_on_exec[i]; | |
| if (!set) | |
| continue; | |
| fdt->close_on_exec[i] = 0; | |
| for ( ; set ; fd++, set >>= 1) { | |
| struct file *file; | |
| if (!(set & 1)) | |
| continue; | |
| file = fdt->fd[fd]; | |
| if (!file) | |
| continue; | |
| rcu_assign_pointer(fdt->fd[fd], NULL); | |
| __put_unused_fd(files, fd); | |
| spin_unlock(&files->file_lock); | |
| filp_close(file, files); | |
| cond_resched(); | |
| spin_lock(&files->file_lock); | |
| } | |
| } | |
| spin_unlock(&files->file_lock); | |
| } | |
| static struct file *__get_file_rcu(struct file __rcu **f) | |
| { | |
| struct file __rcu *file; | |
| struct file __rcu *file_reloaded; | |
| struct file __rcu *file_reloaded_cmp; | |
| file = rcu_dereference_raw(*f); | |
| if (!file) | |
| return NULL; | |
| if (unlikely(!file_ref_get(&file->f_ref))) | |
| return ERR_PTR(-EAGAIN); | |
| file_reloaded = rcu_dereference_raw(*f); | |
| /* | |
| * Ensure that all accesses have a dependency on the load from | |
| * rcu_dereference_raw() above so we get correct ordering | |
| * between reuse/allocation and the pointer check below. | |
| */ | |
| file_reloaded_cmp = file_reloaded; | |
| OPTIMIZER_HIDE_VAR(file_reloaded_cmp); | |
| /* | |
| * file_ref_get() above provided a full memory barrier when we | |
| * acquired a reference. | |
| * | |
| * This is paired with the write barrier from assigning to the | |
| * __rcu protected file pointer so that if that pointer still | |
| * matches the current file, we know we have successfully | |
| * acquired a reference to the right file. | |
| * | |
| * If the pointers don't match the file has been reallocated by | |
| * SLAB_TYPESAFE_BY_RCU. | |
| */ | |
| if (file == file_reloaded_cmp) | |
| return file_reloaded; | |
| fput(file); | |
| return ERR_PTR(-EAGAIN); | |
| } | |
| /** | |
| * get_file_rcu - try go get a reference to a file under rcu | |
| * @f: the file to get a reference on | |
| * | |
| * This function tries to get a reference on @f carefully verifying that | |
| * @f hasn't been reused. | |
| * | |
| * This function should rarely have to be used and only by users who | |
| * understand the implications of SLAB_TYPESAFE_BY_RCU. Try to avoid it. | |
| * | |
| * Return: Returns @f with the reference count increased or NULL. | |
| */ | |
| struct file *get_file_rcu(struct file __rcu **f) | |
| { | |
| for (;;) { | |
| struct file __rcu *file; | |
| file = __get_file_rcu(f); | |
| if (!IS_ERR(file)) | |
| return file; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(get_file_rcu); | |
| /** | |
| * get_file_active - try go get a reference to a file | |
| * @f: the file to get a reference on | |
| * | |
| * In contast to get_file_rcu() the pointer itself isn't part of the | |
| * reference counting. | |
| * | |
| * This function should rarely have to be used and only by users who | |
| * understand the implications of SLAB_TYPESAFE_BY_RCU. Try to avoid it. | |
| * | |
| * Return: Returns @f with the reference count increased or NULL. | |
| */ | |
| struct file *get_file_active(struct file **f) | |
| { | |
| struct file __rcu *file; | |
| rcu_read_lock(); | |
| file = __get_file_rcu(f); | |
| rcu_read_unlock(); | |
| if (IS_ERR(file)) | |
| file = NULL; | |
| return file; | |
| } | |
| EXPORT_SYMBOL_GPL(get_file_active); | |
| static inline struct file *__fget_files_rcu(struct files_struct *files, | |
| unsigned int fd, fmode_t mask) | |
| { | |
| for (;;) { | |
| struct file *file; | |
| struct fdtable *fdt = rcu_dereference_raw(files->fdt); | |
| struct file __rcu **fdentry; | |
| unsigned long nospec_mask; | |
| /* Mask is a 0 for invalid fd's, ~0 for valid ones */ | |
| nospec_mask = array_index_mask_nospec(fd, fdt->max_fds); | |
| /* | |
| * fdentry points to the 'fd' offset, or fdt->fd[0]. | |
| * Loading from fdt->fd[0] is always safe, because the | |
| * array always exists. | |
| */ | |
| fdentry = fdt->fd + (fd & nospec_mask); | |
| /* Do the load, then mask any invalid result */ | |
| file = rcu_dereference_raw(*fdentry); | |
| file = (void *)(nospec_mask & (unsigned long)file); | |
| if (unlikely(!file)) | |
| return NULL; | |
| /* | |
| * Ok, we have a file pointer that was valid at | |
| * some point, but it might have become stale since. | |
| * | |
| * We need to confirm it by incrementing the refcount | |
| * and then check the lookup again. | |
| * | |
| * file_ref_get() gives us a full memory barrier. We | |
| * only really need an 'acquire' one to protect the | |
| * loads below, but we don't have that. | |
| */ | |
| if (unlikely(!file_ref_get(&file->f_ref))) | |
| continue; | |
| /* | |
| * Such a race can take two forms: | |
| * | |
| * (a) the file ref already went down to zero and the | |
| * file hasn't been reused yet or the file count | |
| * isn't zero but the file has already been reused. | |
| * | |
| * (b) the file table entry has changed under us. | |
| * Note that we don't need to re-check the 'fdt->fd' | |
| * pointer having changed, because it always goes | |
| * hand-in-hand with 'fdt'. | |
| * | |
| * If so, we need to put our ref and try again. | |
| */ | |
| if (unlikely(file != rcu_dereference_raw(*fdentry)) || | |
| unlikely(rcu_dereference_raw(files->fdt) != fdt)) { | |
| fput(file); | |
| continue; | |
| } | |
| /* | |
| * This isn't the file we're looking for or we're not | |
| * allowed to get a reference to it. | |
| */ | |
| if (unlikely(file->f_mode & mask)) { | |
| fput(file); | |
| return NULL; | |
| } | |
| /* | |
| * Ok, we have a ref to the file, and checked that it | |
| * still exists. | |
| */ | |
| return file; | |
| } | |
| } | |
| static struct file *__fget_files(struct files_struct *files, unsigned int fd, | |
| fmode_t mask) | |
| { | |
| struct file *file; | |
| rcu_read_lock(); | |
| file = __fget_files_rcu(files, fd, mask); | |
| rcu_read_unlock(); | |
| return file; | |
| } | |
| static inline struct file *__fget(unsigned int fd, fmode_t mask) | |
| { | |
| return __fget_files(current->files, fd, mask); | |
| } | |
| struct file *fget(unsigned int fd) | |
| { | |
| return __fget(fd, FMODE_PATH); | |
| } | |
| EXPORT_SYMBOL(fget); | |
| struct file *fget_raw(unsigned int fd) | |
| { | |
| return __fget(fd, 0); | |
| } | |
| EXPORT_SYMBOL(fget_raw); | |
| struct file *fget_task(struct task_struct *task, unsigned int fd) | |
| { | |
| struct file *file = NULL; | |
| task_lock(task); | |
| if (task->files) | |
| file = __fget_files(task->files, fd, 0); | |
| task_unlock(task); | |
| return file; | |
| } | |
| struct file *fget_task_next(struct task_struct *task, unsigned int *ret_fd) | |
| { | |
| struct files_struct *files; | |
| unsigned int fd = *ret_fd; | |
| struct file *file = NULL; | |
| task_lock(task); | |
| files = task->files; | |
| if (files) { | |
| rcu_read_lock(); | |
| for (; fd < files_fdtable(files)->max_fds; fd++) { | |
| file = __fget_files_rcu(files, fd, 0); | |
| if (file) | |
| break; | |
| } | |
| rcu_read_unlock(); | |
| } | |
| task_unlock(task); | |
| *ret_fd = fd; | |
| return file; | |
| } | |
| EXPORT_SYMBOL(fget_task_next); | |
| /* | |
| * Lightweight file lookup - no refcnt increment if fd table isn't shared. | |
| * | |
| * You can use this instead of fget if you satisfy all of the following | |
| * conditions: | |
| * 1) You must call fput_light before exiting the syscall and returning control | |
| * to userspace (i.e. you cannot remember the returned struct file * after | |
| * returning to userspace). | |
| * 2) You must not call filp_close on the returned struct file * in between | |
| * calls to fget_light and fput_light. | |
| * 3) You must not clone the current task in between the calls to fget_light | |
| * and fput_light. | |
| * | |
| * The fput_needed flag returned by fget_light should be passed to the | |
| * corresponding fput_light. | |
| * | |
| * (As an exception to rule 2, you can call filp_close between fget_light and | |
| * fput_light provided that you capture a real refcount with get_file before | |
| * the call to filp_close, and ensure that this real refcount is fput *after* | |
| * the fput_light call.) | |
| * | |
| * See also the documentation in rust/kernel/file.rs. | |
| */ | |
| static inline struct fd __fget_light(unsigned int fd, fmode_t mask) | |
| { | |
| struct files_struct *files = current->files; | |
| struct file *file; | |
| /* | |
| * If another thread is concurrently calling close_fd() followed | |
| * by put_files_struct(), we must not observe the old table | |
| * entry combined with the new refcount - otherwise we could | |
| * return a file that is concurrently being freed. | |
| * | |
| * atomic_read_acquire() pairs with atomic_dec_and_test() in | |
| * put_files_struct(). | |
| */ | |
| if (likely(atomic_read_acquire(&files->count) == 1)) { | |
| file = files_lookup_fd_raw(files, fd); | |
| if (!file || unlikely(file->f_mode & mask)) | |
| return EMPTY_FD; | |
| return BORROWED_FD(file); | |
| } else { | |
| file = __fget_files(files, fd, mask); | |
| if (!file) | |
| return EMPTY_FD; | |
| return CLONED_FD(file); | |
| } | |
| } | |
| struct fd fdget(unsigned int fd) | |
| { | |
| return __fget_light(fd, FMODE_PATH); | |
| } | |
| EXPORT_SYMBOL(fdget); | |
| struct fd fdget_raw(unsigned int fd) | |
| { | |
| return __fget_light(fd, 0); | |
| } | |
| /* | |
| * Try to avoid f_pos locking. We only need it if the | |
| * file is marked for FMODE_ATOMIC_POS, and it can be | |
| * accessed multiple ways. | |
| * | |
| * Always do it for directories, because pidfd_getfd() | |
| * can make a file accessible even if it otherwise would | |
| * not be, and for directories this is a correctness | |
| * issue, not a "POSIX requirement". | |
| */ | |
| static inline bool file_needs_f_pos_lock(struct file *file) | |
| { | |
| if (!(file->f_mode & FMODE_ATOMIC_POS)) | |
| return false; | |
| if (__file_ref_read_raw(&file->f_ref) != FILE_REF_ONEREF) | |
| return true; | |
| if (file->f_op->iterate_shared) | |
| return true; | |
| return false; | |
| } | |
| bool file_seek_cur_needs_f_lock(struct file *file) | |
| { | |
| if (!(file->f_mode & FMODE_ATOMIC_POS) && !file->f_op->iterate_shared) | |
| return false; | |
| /* | |
| * Note that we are not guaranteed to be called after fdget_pos() on | |
| * this file obj, in which case the caller is expected to provide the | |
| * appropriate locking. | |
| */ | |
| return true; | |
| } | |
| struct fd fdget_pos(unsigned int fd) | |
| { | |
| struct fd f = fdget(fd); | |
| struct file *file = fd_file(f); | |
| if (likely(file) && file_needs_f_pos_lock(file)) { | |
| f.word |= FDPUT_POS_UNLOCK; | |
| mutex_lock(&file->f_pos_lock); | |
| } | |
| return f; | |
| } | |
| void __f_unlock_pos(struct file *f) | |
| { | |
| mutex_unlock(&f->f_pos_lock); | |
| } | |
| /* | |
| * We only lock f_pos if we have threads or if the file might be | |
| * shared with another process. In both cases we'll have an elevated | |
| * file count (done either by fdget() or by fork()). | |
| */ | |
| void set_close_on_exec(unsigned int fd, int flag) | |
| { | |
| struct files_struct *files = current->files; | |
| spin_lock(&files->file_lock); | |
| __set_close_on_exec(fd, files_fdtable(files), flag); | |
| spin_unlock(&files->file_lock); | |
| } | |
| bool get_close_on_exec(unsigned int fd) | |
| { | |
| bool res; | |
| rcu_read_lock(); | |
| res = close_on_exec(fd, current->files); | |
| rcu_read_unlock(); | |
| return res; | |
| } | |
| static int do_dup2(struct files_struct *files, | |
| struct file *file, unsigned fd, unsigned flags) | |
| __releases(&files->file_lock) | |
| { | |
| struct file *tofree; | |
| struct fdtable *fdt; | |
| /* | |
| * dup2() is expected to close the file installed in the target fd slot | |
| * (if any). However, userspace hand-picking a fd may be racing against | |
| * its own threads which happened to allocate it in open() et al but did | |
| * not populate it yet. | |
| * | |
| * Broadly speaking we may be racing against the following: | |
| * fd = get_unused_fd_flags(); // fd slot reserved, ->fd[fd] == NULL | |
| * file = hard_work_goes_here(); | |
| * fd_install(fd, file); // only now ->fd[fd] == file | |
| * | |
| * It is an invariant that a successfully allocated fd has a NULL entry | |
| * in the array until the matching fd_install(). | |
| * | |
| * If we fit the window, we have the fd to populate, yet no target file | |
| * to close. Trying to ignore it and install our new file would violate | |
| * the invariant and make fd_install() overwrite our file. | |
| * | |
| * Things can be done(tm) to handle this. However, the issue does not | |
| * concern legitimate programs and we only need to make sure the kernel | |
| * does not trip over it. | |
| * | |
| * The simplest way out is to return an error if we find ourselves here. | |
| * | |
| * POSIX is silent on the issue, we return -EBUSY. | |
| */ | |
| fdt = files_fdtable(files); | |
| fd = array_index_nospec(fd, fdt->max_fds); | |
| tofree = rcu_dereference_raw(fdt->fd[fd]); | |
| if (!tofree && fd_is_open(fd, fdt)) | |
| goto Ebusy; | |
| get_file(file); | |
| rcu_assign_pointer(fdt->fd[fd], file); | |
| __set_open_fd(fd, fdt, flags & O_CLOEXEC); | |
| spin_unlock(&files->file_lock); | |
| if (tofree) | |
| filp_close(tofree, files); | |
| return fd; | |
| Ebusy: | |
| spin_unlock(&files->file_lock); | |
| return -EBUSY; | |
| } | |
| int replace_fd(unsigned fd, struct file *file, unsigned flags) | |
| { | |
| int err; | |
| struct files_struct *files = current->files; | |
| if (!file) | |
| return close_fd(fd); | |
| if (fd >= rlimit(RLIMIT_NOFILE)) | |
| return -EBADF; | |
| spin_lock(&files->file_lock); | |
| err = expand_files(files, fd); | |
| if (unlikely(err < 0)) | |
| goto out_unlock; | |
| err = do_dup2(files, file, fd, flags); | |
| if (err < 0) | |
| return err; | |
| return 0; | |
| out_unlock: | |
| spin_unlock(&files->file_lock); | |
| return err; | |
| } | |
| /** | |
| * receive_fd() - Install received file into file descriptor table | |
| * @file: struct file that was received from another process | |
| * @ufd: __user pointer to write new fd number to | |
| * @o_flags: the O_* flags to apply to the new fd entry | |
| * | |
| * Installs a received file into the file descriptor table, with appropriate | |
| * checks and count updates. Optionally writes the fd number to userspace, if | |
| * @ufd is non-NULL. | |
| * | |
| * This helper handles its own reference counting of the incoming | |
| * struct file. | |
| * | |
| * Returns newly install fd or -ve on error. | |
| */ | |
| int receive_fd(struct file *file, int __user *ufd, unsigned int o_flags) | |
| { | |
| int error; | |
| error = security_file_receive(file); | |
| if (error) | |
| return error; | |
| FD_PREPARE(fdf, o_flags, file); | |
| if (fdf.err) | |
| return fdf.err; | |
| get_file(file); | |
| if (ufd) { | |
| error = put_user(fd_prepare_fd(fdf), ufd); | |
| if (error) | |
| return error; | |
| } | |
| __receive_sock(fd_prepare_file(fdf)); | |
| return fd_publish(fdf); | |
| } | |
| EXPORT_SYMBOL_GPL(receive_fd); | |
| int receive_fd_replace(int new_fd, struct file *file, unsigned int o_flags) | |
| { | |
| int error; | |
| error = security_file_receive(file); | |
| if (error) | |
| return error; | |
| error = replace_fd(new_fd, file, o_flags); | |
| if (error) | |
| return error; | |
| __receive_sock(file); | |
| return new_fd; | |
| } | |
| static int ksys_dup3(unsigned int oldfd, unsigned int newfd, int flags) | |
| { | |
| int err = -EBADF; | |
| struct file *file; | |
| struct files_struct *files = current->files; | |
| if ((flags & ~O_CLOEXEC) != 0) | |
| return -EINVAL; | |
| if (unlikely(oldfd == newfd)) | |
| return -EINVAL; | |
| if (newfd >= rlimit(RLIMIT_NOFILE)) | |
| return -EBADF; | |
| spin_lock(&files->file_lock); | |
| err = expand_files(files, newfd); | |
| file = files_lookup_fd_locked(files, oldfd); | |
| if (unlikely(!file)) | |
| goto Ebadf; | |
| if (unlikely(err < 0)) { | |
| if (err == -EMFILE) | |
| goto Ebadf; | |
| goto out_unlock; | |
| } | |
| return do_dup2(files, file, newfd, flags); | |
| Ebadf: | |
| err = -EBADF; | |
| out_unlock: | |
| spin_unlock(&files->file_lock); | |
| return err; | |
| } | |
| SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags) | |
| { | |
| return ksys_dup3(oldfd, newfd, flags); | |
| } | |
| SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd) | |
| { | |
| if (unlikely(newfd == oldfd)) { /* corner case */ | |
| struct files_struct *files = current->files; | |
| struct file *f; | |
| int retval = oldfd; | |
| rcu_read_lock(); | |
| f = __fget_files_rcu(files, oldfd, 0); | |
| if (!f) | |
| retval = -EBADF; | |
| rcu_read_unlock(); | |
| if (f) | |
| fput(f); | |
| return retval; | |
| } | |
| return ksys_dup3(oldfd, newfd, 0); | |
| } | |
| SYSCALL_DEFINE1(dup, unsigned int, fildes) | |
| { | |
| int ret = -EBADF; | |
| struct file *file = fget_raw(fildes); | |
| if (file) { | |
| ret = get_unused_fd_flags(0); | |
| if (ret >= 0) | |
| fd_install(ret, file); | |
| else | |
| fput(file); | |
| } | |
| return ret; | |
| } | |
| int f_dupfd(unsigned int from, struct file *file, unsigned flags) | |
| { | |
| unsigned long nofile = rlimit(RLIMIT_NOFILE); | |
| int err; | |
| if (from >= nofile) | |
| return -EINVAL; | |
| err = alloc_fd(from, nofile, flags); | |
| if (err >= 0) { | |
| get_file(file); | |
| fd_install(err, file); | |
| } | |
| return err; | |
| } | |
| int iterate_fd(struct files_struct *files, unsigned n, | |
| int (*f)(const void *, struct file *, unsigned), | |
| const void *p) | |
| { | |
| struct fdtable *fdt; | |
| int res = 0; | |
| if (!files) | |
| return 0; | |
| spin_lock(&files->file_lock); | |
| for (fdt = files_fdtable(files); n < fdt->max_fds; n++) { | |
| struct file *file; | |
| file = rcu_dereference_check_fdtable(files, fdt->fd[n]); | |
| if (!file) | |
| continue; | |
| res = f(p, file, n); | |
| if (res) | |
| break; | |
| } | |
| spin_unlock(&files->file_lock); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(iterate_fd); |