| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Shared application/kernel submission and completion ring pairs, for | |
| * supporting fast/efficient IO. | |
| * | |
| * A note on the read/write ordering memory barriers that are matched between | |
| * the application and kernel side. | |
| * | |
| * After the application reads the CQ ring tail, it must use an | |
| * appropriate smp_rmb() to pair with the smp_wmb() the kernel uses | |
| * before writing the tail (using smp_load_acquire to read the tail will | |
| * do). It also needs a smp_mb() before updating CQ head (ordering the | |
| * entry load(s) with the head store), pairing with an implicit barrier | |
| * through a control-dependency in io_get_cqe (smp_store_release to | |
| * store head will do). Failure to do so could lead to reading invalid | |
| * CQ entries. | |
| * | |
| * Likewise, the application must use an appropriate smp_wmb() before | |
| * writing the SQ tail (ordering SQ entry stores with the tail store), | |
| * which pairs with smp_load_acquire in io_get_sqring (smp_store_release | |
| * to store the tail will do). And it needs a barrier ordering the SQ | |
| * head load before writing new SQ entries (smp_load_acquire to read | |
| * head will do). | |
| * | |
| * When using the SQ poll thread (IORING_SETUP_SQPOLL), the application | |
| * needs to check the SQ flags for IORING_SQ_NEED_WAKEUP *after* | |
| * updating the SQ tail; a full memory barrier smp_mb() is needed | |
| * between. | |
| * | |
| * Also see the examples in the liburing library: | |
| * | |
| * git://git.kernel.org/pub/scm/linux/kernel/git/axboe/liburing.git | |
| * | |
| * io_uring also uses READ/WRITE_ONCE() for _any_ store or load that happens | |
| * from data shared between the kernel and application. This is done both | |
| * for ordering purposes, but also to ensure that once a value is loaded from | |
| * data that the application could potentially modify, it remains stable. | |
| * | |
| * Copyright (C) 2018-2019 Jens Axboe | |
| * Copyright (c) 2018-2019 Christoph Hellwig | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/refcount.h> | |
| #include <linux/bits.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include <linux/percpu.h> | |
| #include <linux/slab.h> | |
| #include <linux/anon_inodes.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/nospec.h> | |
| #include <linux/task_work.h> | |
| #include <linux/io_uring.h> | |
| #include <linux/io_uring/cmd.h> | |
| #include <linux/audit.h> | |
| #include <linux/security.h> | |
| #include <linux/jump_label.h> | |
| #include <linux/kcov.h> | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/io_uring.h> | |
| #include <uapi/linux/io_uring.h> | |
| #include "io-wq.h" | |
| #include "filetable.h" | |
| #include "io_uring.h" | |
| #include "opdef.h" | |
| #include "refs.h" | |
| #include "tctx.h" | |
| #include "register.h" | |
| #include "sqpoll.h" | |
| #include "fdinfo.h" | |
| #include "kbuf.h" | |
| #include "rsrc.h" | |
| #include "cancel.h" | |
| #include "net.h" | |
| #include "notif.h" | |
| #include "waitid.h" | |
| #include "futex.h" | |
| #include "napi.h" | |
| #include "uring_cmd.h" | |
| #include "msg_ring.h" | |
| #include "memmap.h" | |
| #include "zcrx.h" | |
| #include "bpf-ops.h" | |
| #include "timeout.h" | |
| #include "poll.h" | |
| #include "rw.h" | |
| #include "alloc_cache.h" | |
| #include "eventfd.h" | |
| #include "wait.h" | |
| #include "bpf_filter.h" | |
| #include "loop.h" | |
| #define SQE_COMMON_FLAGS (IOSQE_FIXED_FILE | IOSQE_IO_LINK | \ | |
| IOSQE_IO_HARDLINK | IOSQE_ASYNC) | |
| #define IO_REQ_LINK_FLAGS (REQ_F_LINK | REQ_F_HARDLINK) | |
| #define IO_REQ_CLEAN_FLAGS (REQ_F_BUFFER_SELECTED | REQ_F_NEED_CLEANUP | \ | |
| REQ_F_INFLIGHT | REQ_F_CREDS | REQ_F_ASYNC_DATA) | |
| #define IO_REQ_CLEAN_SLOW_FLAGS (REQ_F_REFCOUNT | IO_REQ_LINK_FLAGS | \ | |
| REQ_F_REISSUE | REQ_F_POLLED | \ | |
| IO_REQ_CLEAN_FLAGS) | |
| #define IO_TCTX_REFS_CACHE_NR (1U << 10) | |
| #define IO_COMPL_BATCH 32 | |
| #define IO_REQ_ALLOC_BATCH 8 | |
| /* requests with any of those set should undergo io_disarm_next() */ | |
| #define IO_DISARM_MASK (REQ_F_ARM_LTIMEOUT | REQ_F_LINK_TIMEOUT | REQ_F_FAIL) | |
| static void io_queue_sqe(struct io_kiocb *req, unsigned int extra_flags); | |
| static void __io_req_caches_free(struct io_ring_ctx *ctx); | |
| static __read_mostly DEFINE_STATIC_KEY_DEFERRED_FALSE(io_key_has_sqarray, HZ); | |
| struct kmem_cache *req_cachep; | |
| static struct workqueue_struct *iou_wq __ro_after_init; | |
| static int __read_mostly sysctl_io_uring_disabled; | |
| static int __read_mostly sysctl_io_uring_group = -1; | |
| #ifdef CONFIG_SYSCTL | |
| static const struct ctl_table kernel_io_uring_disabled_table[] = { | |
| { | |
| .procname = "io_uring_disabled", | |
| .data = &sysctl_io_uring_disabled, | |
| .maxlen = sizeof(sysctl_io_uring_disabled), | |
| .mode = 0644, | |
| .proc_handler = proc_dointvec_minmax, | |
| .extra1 = SYSCTL_ZERO, | |
| .extra2 = SYSCTL_TWO, | |
| }, | |
| { | |
| .procname = "io_uring_group", | |
| .data = &sysctl_io_uring_group, | |
| .maxlen = sizeof(gid_t), | |
| .mode = 0644, | |
| .proc_handler = proc_dointvec, | |
| }, | |
| }; | |
| #endif | |
| static void io_poison_cached_req(struct io_kiocb *req) | |
| { | |
| req->ctx = IO_URING_PTR_POISON; | |
| req->tctx = IO_URING_PTR_POISON; | |
| req->file = IO_URING_PTR_POISON; | |
| req->creds = IO_URING_PTR_POISON; | |
| req->io_task_work.func = IO_URING_PTR_POISON; | |
| req->apoll = IO_URING_PTR_POISON; | |
| } | |
| void io_poison_req(struct io_kiocb *req) | |
| { | |
| io_poison_cached_req(req); | |
| req->async_data = IO_URING_PTR_POISON; | |
| req->kbuf = IO_URING_PTR_POISON; | |
| req->comp_list.next = IO_URING_PTR_POISON; | |
| req->file_node = IO_URING_PTR_POISON; | |
| req->link = IO_URING_PTR_POISON; | |
| } | |
| static inline void req_fail_link_node(struct io_kiocb *req, int res) | |
| { | |
| req_set_fail(req); | |
| io_req_set_res(req, res, 0); | |
| } | |
| static inline void io_req_add_to_cache(struct io_kiocb *req, struct io_ring_ctx *ctx) | |
| { | |
| if (IS_ENABLED(CONFIG_KASAN)) | |
| io_poison_cached_req(req); | |
| wq_stack_add_head(&req->comp_list, &ctx->submit_state.free_list); | |
| } | |
| static __cold void io_ring_ctx_ref_free(struct percpu_ref *ref) | |
| { | |
| struct io_ring_ctx *ctx = container_of(ref, struct io_ring_ctx, refs); | |
| complete(&ctx->ref_comp); | |
| } | |
| static int io_alloc_hash_table(struct io_hash_table *table, unsigned bits) | |
| { | |
| unsigned int hash_buckets; | |
| int i; | |
| do { | |
| hash_buckets = 1U << bits; | |
| table->hbs = kvmalloc_objs(table->hbs[0], hash_buckets, | |
| GFP_KERNEL_ACCOUNT); | |
| if (table->hbs) | |
| break; | |
| if (bits == 1) | |
| return -ENOMEM; | |
| bits--; | |
| } while (1); | |
| table->hash_bits = bits; | |
| for (i = 0; i < hash_buckets; i++) | |
| INIT_HLIST_HEAD(&table->hbs[i].list); | |
| return 0; | |
| } | |
| static void io_free_alloc_caches(struct io_ring_ctx *ctx) | |
| { | |
| io_alloc_cache_free(&ctx->apoll_cache, kfree); | |
| io_alloc_cache_free(&ctx->netmsg_cache, io_netmsg_cache_free); | |
| io_alloc_cache_free(&ctx->rw_cache, io_rw_cache_free); | |
| io_alloc_cache_free(&ctx->cmd_cache, io_cmd_cache_free); | |
| io_futex_cache_free(ctx); | |
| io_rsrc_cache_free(ctx); | |
| } | |
| static __cold struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p) | |
| { | |
| struct io_ring_ctx *ctx; | |
| int hash_bits; | |
| bool ret; | |
| ctx = kzalloc_obj(*ctx); | |
| if (!ctx) | |
| return NULL; | |
| xa_init(&ctx->io_bl_xa); | |
| xa_init(&ctx->hpage_acct); | |
| /* | |
| * Use 5 bits less than the max cq entries, that should give us around | |
| * 32 entries per hash list if totally full and uniformly spread, but | |
| * don't keep too many buckets to not overconsume memory. | |
| */ | |
| hash_bits = ilog2(p->cq_entries) - 5; | |
| hash_bits = clamp(hash_bits, 1, 8); | |
| if (io_alloc_hash_table(&ctx->cancel_table, hash_bits)) | |
| goto err; | |
| if (percpu_ref_init(&ctx->refs, io_ring_ctx_ref_free, | |
| 0, GFP_KERNEL)) | |
| goto err; | |
| ctx->flags = p->flags; | |
| ctx->hybrid_poll_time = LLONG_MAX; | |
| atomic_set(&ctx->cq_wait_nr, IO_CQ_WAKE_INIT); | |
| init_waitqueue_head(&ctx->sqo_sq_wait); | |
| INIT_LIST_HEAD(&ctx->sqd_list); | |
| INIT_LIST_HEAD(&ctx->cq_overflow_list); | |
| ret = io_alloc_cache_init(&ctx->apoll_cache, IO_POLL_ALLOC_CACHE_MAX, | |
| sizeof(struct async_poll), 0); | |
| ret |= io_alloc_cache_init(&ctx->netmsg_cache, IO_ALLOC_CACHE_MAX, | |
| sizeof(struct io_async_msghdr), | |
| offsetof(struct io_async_msghdr, clear)); | |
| ret |= io_alloc_cache_init(&ctx->rw_cache, IO_ALLOC_CACHE_MAX, | |
| sizeof(struct io_async_rw), | |
| offsetof(struct io_async_rw, clear)); | |
| ret |= io_alloc_cache_init(&ctx->cmd_cache, IO_ALLOC_CACHE_MAX, | |
| sizeof(struct io_async_cmd), | |
| sizeof(struct io_async_cmd)); | |
| ret |= io_futex_cache_init(ctx); | |
| ret |= io_rsrc_cache_init(ctx); | |
| if (ret) | |
| goto free_ref; | |
| init_completion(&ctx->ref_comp); | |
| xa_init_flags(&ctx->personalities, XA_FLAGS_ALLOC1); | |
| mutex_init(&ctx->uring_lock); | |
| init_waitqueue_head(&ctx->cq_wait); | |
| init_waitqueue_head(&ctx->poll_wq); | |
| spin_lock_init(&ctx->completion_lock); | |
| raw_spin_lock_init(&ctx->timeout_lock); | |
| INIT_LIST_HEAD(&ctx->iopoll_list); | |
| INIT_LIST_HEAD(&ctx->defer_list); | |
| INIT_LIST_HEAD(&ctx->timeout_list); | |
| INIT_LIST_HEAD(&ctx->ltimeout_list); | |
| mpscq_init(&ctx->work_list, &ctx->work_head); | |
| INIT_LIST_HEAD(&ctx->tctx_list); | |
| mutex_init(&ctx->tctx_lock); | |
| ctx->submit_state.free_list.next = NULL; | |
| INIT_HLIST_HEAD(&ctx->waitid_list); | |
| xa_init_flags(&ctx->zcrx_ctxs, XA_FLAGS_ALLOC); | |
| #ifdef CONFIG_FUTEX | |
| INIT_HLIST_HEAD(&ctx->futex_list); | |
| #endif | |
| INIT_WQ_LIST(&ctx->submit_state.compl_reqs); | |
| INIT_HLIST_HEAD(&ctx->cancelable_uring_cmd); | |
| io_napi_init(ctx); | |
| mutex_init(&ctx->mmap_lock); | |
| ctx->kcov_handle = kcov_common_handle(); | |
| return ctx; | |
| free_ref: | |
| percpu_ref_exit(&ctx->refs); | |
| err: | |
| io_free_alloc_caches(ctx); | |
| kvfree(ctx->cancel_table.hbs); | |
| xa_destroy(&ctx->io_bl_xa); | |
| xa_destroy(&ctx->hpage_acct); | |
| kfree(ctx); | |
| return NULL; | |
| } | |
| static void io_clean_op(struct io_kiocb *req) | |
| { | |
| if (unlikely(req->flags & REQ_F_BUFFER_SELECTED)) | |
| io_kbuf_drop_legacy(req); | |
| if (req->flags & REQ_F_NEED_CLEANUP) { | |
| const struct io_cold_def *def = &io_cold_defs[req->opcode]; | |
| if (def->cleanup) | |
| def->cleanup(req); | |
| } | |
| if (req->flags & REQ_F_INFLIGHT) | |
| atomic_dec(&req->tctx->inflight_tracked); | |
| if (req->flags & REQ_F_CREDS) | |
| put_cred(req->creds); | |
| if (req->flags & REQ_F_ASYNC_DATA) { | |
| kfree(req->async_data); | |
| req->async_data = NULL; | |
| } | |
| req->flags &= ~IO_REQ_CLEAN_FLAGS; | |
| } | |
| /* | |
| * Mark the request as inflight, so that file cancelation will find it. | |
| * Can be used if the file is an io_uring instance, or if the request itself | |
| * relies on ->mm being alive for the duration of the request. | |
| */ | |
| inline void io_req_track_inflight(struct io_kiocb *req) | |
| { | |
| if (!(req->flags & REQ_F_INFLIGHT)) { | |
| req->flags |= REQ_F_INFLIGHT; | |
| atomic_inc(&req->tctx->inflight_tracked); | |
| } | |
| } | |
| static struct io_kiocb *__io_prep_linked_timeout(struct io_kiocb *req) | |
| { | |
| if (WARN_ON_ONCE(!req->link)) | |
| return NULL; | |
| req->flags &= ~REQ_F_ARM_LTIMEOUT; | |
| req->flags |= REQ_F_LINK_TIMEOUT; | |
| /* linked timeouts should have two refs once prep'ed */ | |
| io_req_set_refcount(req); | |
| __io_req_set_refcount(req->link, 2); | |
| return req->link; | |
| } | |
| static void io_prep_async_work(struct io_kiocb *req) | |
| { | |
| const struct io_issue_def *def = &io_issue_defs[req->opcode]; | |
| if (!(req->flags & REQ_F_CREDS)) { | |
| req->flags |= REQ_F_CREDS; | |
| req->creds = get_current_cred(); | |
| } | |
| req->work.list.next = NULL; | |
| atomic_set(&req->work.flags, 0); | |
| if (req->flags & REQ_F_FORCE_ASYNC) | |
| atomic_or(IO_WQ_WORK_CONCURRENT, &req->work.flags); | |
| if (req->file && !(req->flags & REQ_F_FIXED_FILE)) | |
| req->flags |= io_file_get_flags(req->file); | |
| if (req->file && (req->flags & REQ_F_ISREG)) { | |
| bool should_hash = def->hash_reg_file; | |
| /* don't serialize this request if the fs doesn't need it */ | |
| if (should_hash && (req->file->f_flags & O_DIRECT) && | |
| (req->file->f_op->fop_flags & FOP_DIO_PARALLEL_WRITE)) | |
| should_hash = false; | |
| if (should_hash || (req->flags & REQ_F_IOPOLL)) | |
| io_wq_hash_work(&req->work, file_inode(req->file)); | |
| } else if (!req->file || !S_ISBLK(file_inode(req->file)->i_mode)) { | |
| if (def->unbound_nonreg_file) | |
| atomic_or(IO_WQ_WORK_UNBOUND, &req->work.flags); | |
| } | |
| } | |
| static void io_prep_async_link(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *cur; | |
| if (req->flags & REQ_F_LINK_TIMEOUT) { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| raw_spin_lock_irq(&ctx->timeout_lock); | |
| io_for_each_link(cur, req) | |
| io_prep_async_work(cur); | |
| raw_spin_unlock_irq(&ctx->timeout_lock); | |
| } else { | |
| io_for_each_link(cur, req) | |
| io_prep_async_work(cur); | |
| } | |
| } | |
| void io_queue_iowq(struct io_kiocb *req) | |
| { | |
| struct io_uring_task *tctx = req->tctx; | |
| BUG_ON(!tctx); | |
| if ((current->flags & PF_KTHREAD) || !tctx->io_wq) { | |
| io_req_task_queue_fail(req, -ECANCELED); | |
| return; | |
| } | |
| /* init ->work of the whole link before punting */ | |
| io_prep_async_link(req); | |
| /* | |
| * Not expected to happen, but if we do have a bug where this _can_ | |
| * happen, catch it here and ensure the request is marked as | |
| * canceled. That will make io-wq go through the usual work cancel | |
| * procedure rather than attempt to run this request (or create a new | |
| * worker for it). | |
| */ | |
| if (WARN_ON_ONCE(!same_thread_group(tctx->task, current))) | |
| atomic_or(IO_WQ_WORK_CANCEL, &req->work.flags); | |
| trace_io_uring_queue_async_work(req, io_wq_is_hashed(&req->work)); | |
| io_wq_enqueue(tctx->io_wq, &req->work); | |
| } | |
| unsigned io_linked_nr(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *tmp; | |
| unsigned nr = 0; | |
| io_for_each_link(tmp, req) | |
| nr++; | |
| return nr; | |
| } | |
| static __cold noinline void io_queue_deferred(struct io_ring_ctx *ctx) | |
| { | |
| bool drain_seen = false, first = true; | |
| lockdep_assert_held(&ctx->uring_lock); | |
| __io_req_caches_free(ctx); | |
| while (!list_empty(&ctx->defer_list)) { | |
| struct io_defer_entry *de = list_first_entry(&ctx->defer_list, | |
| struct io_defer_entry, list); | |
| drain_seen |= de->req->flags & REQ_F_IO_DRAIN; | |
| if ((drain_seen || first) && ctx->nr_req_allocated != ctx->nr_drained) | |
| return; | |
| list_del_init(&de->list); | |
| ctx->nr_drained -= io_linked_nr(de->req); | |
| io_req_task_queue(de->req); | |
| kfree(de); | |
| first = false; | |
| } | |
| } | |
| void __io_commit_cqring_flush(struct io_ring_ctx *ctx) | |
| { | |
| if (ctx->int_flags & IO_RING_F_POLL_ACTIVATED) | |
| io_poll_wq_wake(ctx); | |
| if (ctx->int_flags & IO_RING_F_OFF_TIMEOUT_USED) | |
| io_flush_timeouts(ctx); | |
| if (ctx->int_flags & IO_RING_F_HAS_EVFD) | |
| io_eventfd_signal(ctx, true, false); | |
| } | |
| static inline void __io_cq_lock(struct io_ring_ctx *ctx) | |
| { | |
| if (!(ctx->int_flags & IO_RING_F_LOCKLESS_CQ)) | |
| spin_lock(&ctx->completion_lock); | |
| } | |
| static inline void io_cq_lock(struct io_ring_ctx *ctx) | |
| __acquires(ctx->completion_lock) | |
| { | |
| spin_lock(&ctx->completion_lock); | |
| } | |
| static inline void __io_cq_unlock_post(struct io_ring_ctx *ctx) | |
| { | |
| io_commit_cqring(ctx); | |
| if (!(ctx->int_flags & IO_RING_F_TASK_COMPLETE)) { | |
| if (!(ctx->int_flags & IO_RING_F_LOCKLESS_CQ)) | |
| spin_unlock(&ctx->completion_lock); | |
| /* IOPOLL rings only need to wake up if it's also SQPOLL */ | |
| if (!(ctx->int_flags & IO_RING_F_SYSCALL_IOPOLL)) | |
| io_cqring_wake(ctx); | |
| } | |
| io_commit_cqring_flush(ctx); | |
| } | |
| static void io_cq_unlock_post(struct io_ring_ctx *ctx) | |
| __releases(ctx->completion_lock) | |
| { | |
| io_commit_cqring(ctx); | |
| spin_unlock(&ctx->completion_lock); | |
| io_cqring_wake(ctx); | |
| io_commit_cqring_flush(ctx); | |
| } | |
| static void __io_cqring_overflow_flush(struct io_ring_ctx *ctx, bool dying) | |
| { | |
| lockdep_assert_held(&ctx->uring_lock); | |
| /* don't abort if we're dying, entries must get freed */ | |
| if (!dying && __io_cqring_events(ctx) == ctx->cq_entries) | |
| return; | |
| io_cq_lock(ctx); | |
| while (!list_empty(&ctx->cq_overflow_list)) { | |
| size_t cqe_size = sizeof(struct io_uring_cqe); | |
| struct io_uring_cqe *cqe; | |
| struct io_overflow_cqe *ocqe; | |
| bool is_cqe32 = false; | |
| ocqe = list_first_entry(&ctx->cq_overflow_list, | |
| struct io_overflow_cqe, list); | |
| if (ocqe->cqe.flags & IORING_CQE_F_32 || | |
| ctx->flags & IORING_SETUP_CQE32) { | |
| is_cqe32 = true; | |
| cqe_size <<= 1; | |
| } | |
| if (ctx->flags & IORING_SETUP_CQE32) | |
| is_cqe32 = false; | |
| if (!dying) { | |
| if (!io_get_cqe_overflow(ctx, &cqe, true, is_cqe32)) | |
| break; | |
| memcpy(cqe, &ocqe->cqe, cqe_size); | |
| } | |
| list_del(&ocqe->list); | |
| kfree(ocqe); | |
| /* | |
| * For silly syzbot cases that deliberately overflow by huge | |
| * amounts, check if we need to resched and drop and | |
| * reacquire the locks if so. Nothing real would ever hit this. | |
| * Ideally we'd have a non-posting unlock for this, but hard | |
| * to care for a non-real case. | |
| */ | |
| if (need_resched()) { | |
| ctx->cqe_sentinel = ctx->cqe_cached; | |
| io_cq_unlock_post(ctx); | |
| mutex_unlock(&ctx->uring_lock); | |
| cond_resched(); | |
| mutex_lock(&ctx->uring_lock); | |
| io_cq_lock(ctx); | |
| } | |
| } | |
| if (list_empty(&ctx->cq_overflow_list)) { | |
| clear_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq); | |
| atomic_andnot(IORING_SQ_CQ_OVERFLOW, &ctx->rings->sq_flags); | |
| } | |
| io_cq_unlock_post(ctx); | |
| } | |
| static void io_cqring_overflow_kill(struct io_ring_ctx *ctx) | |
| { | |
| if (ctx->rings) | |
| __io_cqring_overflow_flush(ctx, true); | |
| } | |
| void io_cqring_do_overflow_flush(struct io_ring_ctx *ctx) | |
| { | |
| mutex_lock(&ctx->uring_lock); | |
| __io_cqring_overflow_flush(ctx, false); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| void io_cqring_overflow_flush_locked(struct io_ring_ctx *ctx) | |
| { | |
| __io_cqring_overflow_flush(ctx, false); | |
| } | |
| /* must to be called somewhat shortly after putting a request */ | |
| static inline void io_put_task(struct io_kiocb *req) | |
| { | |
| struct io_uring_task *tctx = req->tctx; | |
| if (likely(tctx->task == current)) { | |
| tctx->cached_refs++; | |
| } else { | |
| percpu_counter_sub(&tctx->inflight, 1); | |
| if (unlikely(atomic_read(&tctx->in_cancel))) | |
| wake_up(&tctx->wait); | |
| put_task_struct(tctx->task); | |
| } | |
| } | |
| void io_task_refs_refill(struct io_uring_task *tctx) | |
| { | |
| unsigned int refill = -tctx->cached_refs + IO_TCTX_REFS_CACHE_NR; | |
| percpu_counter_add(&tctx->inflight, refill); | |
| refcount_add(refill, ¤t->usage); | |
| tctx->cached_refs += refill; | |
| } | |
| __cold void io_uring_drop_tctx_refs(struct task_struct *task) | |
| { | |
| struct io_uring_task *tctx = task->io_uring; | |
| unsigned int refs = tctx->cached_refs; | |
| if (refs) { | |
| tctx->cached_refs = 0; | |
| percpu_counter_sub(&tctx->inflight, refs); | |
| put_task_struct_many(task, refs); | |
| } | |
| } | |
| static __cold bool io_cqring_add_overflow(struct io_ring_ctx *ctx, | |
| struct io_overflow_cqe *ocqe) | |
| { | |
| lockdep_assert_held(&ctx->completion_lock); | |
| if (!ocqe) { | |
| struct io_rings *r = ctx->rings; | |
| /* | |
| * If we're in ring overflow flush mode, or in task cancel mode, | |
| * or cannot allocate an overflow entry, then we need to drop it | |
| * on the floor. | |
| */ | |
| WRITE_ONCE(r->cq_overflow, READ_ONCE(r->cq_overflow) + 1); | |
| set_bit(IO_CHECK_CQ_DROPPED_BIT, &ctx->check_cq); | |
| return false; | |
| } | |
| if (list_empty(&ctx->cq_overflow_list)) { | |
| set_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq); | |
| atomic_or(IORING_SQ_CQ_OVERFLOW, &ctx->rings->sq_flags); | |
| } | |
| list_add_tail(&ocqe->list, &ctx->cq_overflow_list); | |
| return true; | |
| } | |
| static struct io_overflow_cqe *io_alloc_ocqe(struct io_ring_ctx *ctx, | |
| struct io_cqe *cqe, | |
| struct io_big_cqe *big_cqe, gfp_t gfp) | |
| { | |
| struct io_overflow_cqe *ocqe; | |
| size_t ocq_size = sizeof(struct io_overflow_cqe); | |
| bool is_cqe32 = false; | |
| if (cqe->flags & IORING_CQE_F_32 || ctx->flags & IORING_SETUP_CQE32) { | |
| is_cqe32 = true; | |
| ocq_size += sizeof(struct io_uring_cqe); | |
| } | |
| ocqe = kzalloc(ocq_size, gfp | __GFP_ACCOUNT); | |
| trace_io_uring_cqe_overflow(ctx, cqe->user_data, cqe->res, cqe->flags, ocqe); | |
| if (ocqe) { | |
| ocqe->cqe.user_data = cqe->user_data; | |
| ocqe->cqe.res = cqe->res; | |
| ocqe->cqe.flags = cqe->flags; | |
| if (is_cqe32 && big_cqe) { | |
| ocqe->cqe.big_cqe[0] = big_cqe->extra1; | |
| ocqe->cqe.big_cqe[1] = big_cqe->extra2; | |
| } | |
| } | |
| if (big_cqe) | |
| big_cqe->extra1 = big_cqe->extra2 = 0; | |
| return ocqe; | |
| } | |
| /* | |
| * Compute queued CQEs for free-space calculation, clamped to cq_entries. | |
| */ | |
| static unsigned int io_cqring_queued(struct io_ring_ctx *ctx) | |
| { | |
| struct io_rings *rings = io_get_rings(ctx); | |
| int diff; | |
| diff = (int)(ctx->cached_cq_tail - READ_ONCE(rings->cq.head)); | |
| if (diff >= 0) | |
| return min((unsigned int)diff, ctx->cq_entries); | |
| return 0; | |
| } | |
| /* | |
| * Fill an empty dummy CQE, in case alignment is off for posting a 32b CQE | |
| * because the ring is a single 16b entry away from wrapping. | |
| */ | |
| static bool io_fill_nop_cqe(struct io_ring_ctx *ctx, unsigned int off) | |
| { | |
| if (io_cqring_queued(ctx) < ctx->cq_entries) { | |
| struct io_uring_cqe *cqe = &ctx->rings->cqes[off]; | |
| cqe->user_data = 0; | |
| cqe->res = 0; | |
| cqe->flags = IORING_CQE_F_SKIP; | |
| ctx->cached_cq_tail++; | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * writes to the cq entry need to come after reading head; the | |
| * control dependency is enough as we're using WRITE_ONCE to | |
| * fill the cq entry | |
| */ | |
| bool io_cqe_cache_refill(struct io_ring_ctx *ctx, bool overflow, bool cqe32) | |
| { | |
| struct io_rings *rings = ctx->rings; | |
| unsigned int off = ctx->cached_cq_tail & (ctx->cq_entries - 1); | |
| unsigned int free, len; | |
| /* | |
| * Posting into the CQ when there are pending overflowed CQEs may break | |
| * ordering guarantees, which will affect links, F_MORE users and more. | |
| * Force overflow the completion. | |
| */ | |
| if (!overflow && (ctx->check_cq & BIT(IO_CHECK_CQ_OVERFLOW_BIT))) | |
| return false; | |
| /* | |
| * Post dummy CQE if a 32b CQE is needed and there's only room for a | |
| * 16b CQE before the ring wraps. | |
| */ | |
| if (cqe32 && (ctx->flags & IORING_SETUP_CQE_MIXED) && | |
| off + 1 == ctx->cq_entries) { | |
| if (!io_fill_nop_cqe(ctx, off)) | |
| return false; | |
| off = 0; | |
| } | |
| free = ctx->cq_entries - io_cqring_queued(ctx); | |
| /* we need a contiguous range, limit based on the current array offset */ | |
| len = min(free, ctx->cq_entries - off); | |
| if (ctx->flags & IORING_SETUP_CQE32) { | |
| if (!len) | |
| return false; | |
| off <<= 1; | |
| len <<= 1; | |
| } else if (len < (cqe32 + 1)) { | |
| return false; | |
| } | |
| ctx->cqe_cached = &rings->cqes[off]; | |
| ctx->cqe_sentinel = ctx->cqe_cached + len; | |
| return true; | |
| } | |
| static bool io_fill_cqe_aux32(struct io_ring_ctx *ctx, | |
| struct io_uring_cqe src_cqe[2]) | |
| { | |
| struct io_uring_cqe *cqe; | |
| if (WARN_ON_ONCE(!(ctx->flags & (IORING_SETUP_CQE32|IORING_SETUP_CQE_MIXED)))) | |
| return false; | |
| if (unlikely(!io_get_cqe(ctx, &cqe, true))) | |
| return false; | |
| memcpy(cqe, src_cqe, 2 * sizeof(*cqe)); | |
| trace_io_uring_complete(ctx, NULL, cqe); | |
| return true; | |
| } | |
| static bool io_fill_cqe_aux(struct io_ring_ctx *ctx, u64 user_data, s32 res, | |
| u32 cflags) | |
| { | |
| bool cqe32 = cflags & IORING_CQE_F_32; | |
| struct io_uring_cqe *cqe; | |
| if (likely(io_get_cqe(ctx, &cqe, cqe32))) { | |
| WRITE_ONCE(cqe->user_data, user_data); | |
| WRITE_ONCE(cqe->res, res); | |
| WRITE_ONCE(cqe->flags, cflags); | |
| if (cqe32 || (ctx->flags & IORING_SETUP_CQE32)) { | |
| WRITE_ONCE(cqe->big_cqe[0], 0); | |
| WRITE_ONCE(cqe->big_cqe[1], 0); | |
| } | |
| trace_io_uring_complete(ctx, NULL, cqe); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static inline struct io_cqe io_init_cqe(u64 user_data, s32 res, u32 cflags) | |
| { | |
| return (struct io_cqe) { .user_data = user_data, .res = res, .flags = cflags }; | |
| } | |
| static __cold void io_cqe_overflow(struct io_ring_ctx *ctx, struct io_cqe *cqe, | |
| struct io_big_cqe *big_cqe) | |
| { | |
| struct io_overflow_cqe *ocqe; | |
| ocqe = io_alloc_ocqe(ctx, cqe, big_cqe, GFP_KERNEL); | |
| spin_lock(&ctx->completion_lock); | |
| io_cqring_add_overflow(ctx, ocqe); | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| static __cold bool io_cqe_overflow_locked(struct io_ring_ctx *ctx, | |
| struct io_cqe *cqe, | |
| struct io_big_cqe *big_cqe) | |
| { | |
| struct io_overflow_cqe *ocqe; | |
| ocqe = io_alloc_ocqe(ctx, cqe, big_cqe, GFP_NOWAIT); | |
| return io_cqring_add_overflow(ctx, ocqe); | |
| } | |
| bool io_post_aux_cqe(struct io_ring_ctx *ctx, u64 user_data, s32 res, u32 cflags) | |
| { | |
| bool filled; | |
| io_cq_lock(ctx); | |
| filled = io_fill_cqe_aux(ctx, user_data, res, cflags); | |
| if (unlikely(!filled)) { | |
| struct io_cqe cqe = io_init_cqe(user_data, res, cflags); | |
| filled = io_cqe_overflow_locked(ctx, &cqe, NULL); | |
| } | |
| io_cq_unlock_post(ctx); | |
| return filled; | |
| } | |
| /* | |
| * Must be called from inline task_work so we know a flush will happen later, | |
| * and obviously with ctx->uring_lock held (tw always has that). | |
| */ | |
| void io_add_aux_cqe(struct io_ring_ctx *ctx, u64 user_data, s32 res, u32 cflags) | |
| { | |
| lockdep_assert_held(&ctx->uring_lock); | |
| lockdep_assert(ctx->int_flags & IO_RING_F_LOCKLESS_CQ); | |
| if (!io_fill_cqe_aux(ctx, user_data, res, cflags)) { | |
| struct io_cqe cqe = io_init_cqe(user_data, res, cflags); | |
| io_cqe_overflow(ctx, &cqe, NULL); | |
| } | |
| ctx->submit_state.cq_flush = true; | |
| } | |
| /* | |
| * A helper for multishot requests posting additional CQEs. | |
| * Should only be used from a task_work including IO_URING_F_MULTISHOT. | |
| */ | |
| bool io_req_post_cqe(struct io_kiocb *req, s32 res, u32 cflags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| bool posted; | |
| /* | |
| * If multishot has already posted deferred completions, ensure that | |
| * those are flushed first before posting this one. If not, CQEs | |
| * could get reordered. | |
| */ | |
| if (!wq_list_empty(&ctx->submit_state.compl_reqs)) | |
| __io_submit_flush_completions(ctx); | |
| lockdep_assert(!io_wq_current_is_worker()); | |
| lockdep_assert_held(&ctx->uring_lock); | |
| if (!(ctx->int_flags & IO_RING_F_LOCKLESS_CQ)) { | |
| spin_lock(&ctx->completion_lock); | |
| posted = io_fill_cqe_aux(ctx, req->cqe.user_data, res, cflags); | |
| spin_unlock(&ctx->completion_lock); | |
| } else { | |
| posted = io_fill_cqe_aux(ctx, req->cqe.user_data, res, cflags); | |
| } | |
| ctx->submit_state.cq_flush = true; | |
| return posted; | |
| } | |
| /* | |
| * A helper for multishot requests posting additional CQEs. | |
| * Should only be used from a task_work including IO_URING_F_MULTISHOT. | |
| */ | |
| bool io_req_post_cqe32(struct io_kiocb *req, struct io_uring_cqe cqe[2]) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| bool posted; | |
| lockdep_assert(!io_wq_current_is_worker()); | |
| lockdep_assert_held(&ctx->uring_lock); | |
| cqe[0].user_data = req->cqe.user_data; | |
| if (!(ctx->int_flags & IO_RING_F_LOCKLESS_CQ)) { | |
| spin_lock(&ctx->completion_lock); | |
| posted = io_fill_cqe_aux32(ctx, cqe); | |
| spin_unlock(&ctx->completion_lock); | |
| } else { | |
| posted = io_fill_cqe_aux32(ctx, cqe); | |
| } | |
| ctx->submit_state.cq_flush = true; | |
| return posted; | |
| } | |
| static void io_req_complete_post(struct io_kiocb *req, unsigned issue_flags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| bool completed = true; | |
| /* | |
| * All execution paths but io-wq use the deferred completions by | |
| * passing IO_URING_F_COMPLETE_DEFER and thus should not end up here. | |
| */ | |
| if (WARN_ON_ONCE(!(issue_flags & IO_URING_F_IOWQ))) | |
| return; | |
| /* | |
| * Handle special CQ sync cases via task_work. DEFER_TASKRUN requires | |
| * the submitter task context, IOPOLL protects with uring_lock. | |
| */ | |
| if ((ctx->int_flags & IO_RING_F_LOCKLESS_CQ) || (req->flags & REQ_F_REISSUE)) { | |
| defer_complete: | |
| req->io_task_work.func = io_req_task_complete; | |
| io_req_task_work_add(req); | |
| return; | |
| } | |
| io_cq_lock(ctx); | |
| if (!(req->flags & REQ_F_CQE_SKIP)) | |
| completed = io_fill_cqe_req(ctx, req); | |
| io_cq_unlock_post(ctx); | |
| if (!completed) | |
| goto defer_complete; | |
| /* | |
| * We don't free the request here because we know it's called from | |
| * io-wq only, which holds a reference, so it cannot be the last put. | |
| */ | |
| req_ref_put(req); | |
| } | |
| void io_req_defer_failed(struct io_kiocb *req, s32 res) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| const struct io_cold_def *def = &io_cold_defs[req->opcode]; | |
| lockdep_assert_held(&req->ctx->uring_lock); | |
| req_set_fail(req); | |
| io_req_set_res(req, res, io_put_kbuf(req, res, NULL)); | |
| if (def->fail) | |
| def->fail(req); | |
| io_req_complete_defer(req); | |
| } | |
| /* | |
| * A request might get retired back into the request caches even before opcode | |
| * handlers and io_issue_sqe() are done with it, e.g. inline completion path. | |
| * Because of that, io_alloc_req() should be called only under ->uring_lock | |
| * and with extra caution to not get a request that is still worked on. | |
| */ | |
| __cold bool __io_alloc_req_refill(struct io_ring_ctx *ctx) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| gfp_t gfp = GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO; | |
| void *reqs[IO_REQ_ALLOC_BATCH]; | |
| int nr_reqs = ARRAY_SIZE(reqs); | |
| /* | |
| * Bulk alloc is all-or-nothing. If we fail to get a batch, retry a | |
| * single allocation to be on the safe side. | |
| */ | |
| if (!kmem_cache_alloc_bulk(req_cachep, gfp, nr_reqs, reqs)) { | |
| reqs[0] = kmem_cache_alloc(req_cachep, gfp); | |
| if (!reqs[0]) | |
| return false; | |
| nr_reqs = 1; | |
| } | |
| percpu_ref_get_many(&ctx->refs, nr_reqs); | |
| ctx->nr_req_allocated += nr_reqs; | |
| while (nr_reqs--) | |
| io_req_add_to_cache(reqs[nr_reqs], ctx); | |
| return true; | |
| } | |
| __cold void io_free_req(struct io_kiocb *req) | |
| { | |
| /* refs were already put, restore them for io_req_task_complete() */ | |
| req->flags &= ~REQ_F_REFCOUNT; | |
| /* we only want to free it, don't post CQEs */ | |
| req->flags |= REQ_F_CQE_SKIP; | |
| req->io_task_work.func = io_req_task_complete; | |
| io_req_task_work_add(req); | |
| } | |
| static void __io_req_find_next_prep(struct io_kiocb *req) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| spin_lock(&ctx->completion_lock); | |
| io_disarm_next(req); | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| static inline struct io_kiocb *io_req_find_next(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *nxt; | |
| /* | |
| * If LINK is set, we have dependent requests in this chain. If we | |
| * didn't fail this request, queue the first one up, moving any other | |
| * dependencies to the next request. In case of failure, fail the rest | |
| * of the chain. | |
| */ | |
| if (unlikely(req->flags & IO_DISARM_MASK)) | |
| __io_req_find_next_prep(req); | |
| nxt = req->link; | |
| req->link = NULL; | |
| return nxt; | |
| } | |
| static void io_req_task_cancel(struct io_tw_req tw_req, io_tw_token_t tw) | |
| { | |
| struct io_kiocb *req = tw_req.req; | |
| io_tw_lock(req->ctx, tw); | |
| io_req_defer_failed(req, req->cqe.res); | |
| } | |
| void io_req_task_submit(struct io_tw_req tw_req, io_tw_token_t tw) | |
| { | |
| struct io_kiocb *req = tw_req.req; | |
| struct io_ring_ctx *ctx = req->ctx; | |
| io_tw_lock(ctx, tw); | |
| if (unlikely(tw.cancel)) | |
| io_req_defer_failed(req, -EFAULT); | |
| else if (req->flags & REQ_F_FORCE_ASYNC) | |
| io_queue_iowq(req); | |
| else | |
| io_queue_sqe(req, 0); | |
| } | |
| void io_req_task_queue_fail(struct io_kiocb *req, int ret) | |
| { | |
| io_req_set_res(req, ret, 0); | |
| req->io_task_work.func = io_req_task_cancel; | |
| io_req_task_work_add(req); | |
| } | |
| void io_req_task_queue(struct io_kiocb *req) | |
| { | |
| req->io_task_work.func = io_req_task_submit; | |
| io_req_task_work_add(req); | |
| } | |
| void io_queue_next(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *nxt = io_req_find_next(req); | |
| if (nxt) | |
| io_req_task_queue(nxt); | |
| } | |
| static inline void io_req_put_rsrc_nodes(struct io_kiocb *req) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| if (req->file_node) { | |
| io_put_rsrc_node(ctx, req->file_node); | |
| req->file_node = NULL; | |
| } | |
| if (req->flags & REQ_F_BUF_NODE) | |
| io_put_rsrc_node(ctx, req->buf_node); | |
| } | |
| static void io_free_batch_list(struct io_ring_ctx *ctx, | |
| struct io_wq_work_node *node) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| do { | |
| struct io_kiocb *req = container_of(node, struct io_kiocb, | |
| comp_list); | |
| if (unlikely(req->flags & IO_REQ_CLEAN_SLOW_FLAGS)) { | |
| if (req->flags & REQ_F_REISSUE) { | |
| node = req->comp_list.next; | |
| req->flags &= ~REQ_F_REISSUE; | |
| io_queue_iowq(req); | |
| continue; | |
| } | |
| if (req->flags & REQ_F_REFCOUNT) { | |
| node = req->comp_list.next; | |
| if (!req_ref_put_and_test(req)) | |
| continue; | |
| } | |
| if ((req->flags & REQ_F_POLLED) && req->apoll) { | |
| struct async_poll *apoll = req->apoll; | |
| if (apoll->double_poll) | |
| kfree(apoll->double_poll); | |
| io_cache_free(&ctx->apoll_cache, apoll); | |
| req->flags &= ~REQ_F_POLLED; | |
| } | |
| if (req->flags & IO_REQ_LINK_FLAGS) | |
| io_queue_next(req); | |
| if (unlikely(req->flags & IO_REQ_CLEAN_FLAGS)) | |
| io_clean_op(req); | |
| } | |
| io_put_file(req); | |
| io_req_put_rsrc_nodes(req); | |
| io_put_task(req); | |
| node = req->comp_list.next; | |
| io_req_add_to_cache(req, ctx); | |
| } while (node); | |
| } | |
| void __io_submit_flush_completions(struct io_ring_ctx *ctx) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_submit_state *state = &ctx->submit_state; | |
| struct io_wq_work_node *node; | |
| __io_cq_lock(ctx); | |
| __wq_list_for_each(node, &state->compl_reqs) { | |
| struct io_kiocb *req = container_of(node, struct io_kiocb, | |
| comp_list); | |
| /* | |
| * Requests marked with REQUEUE should not post a CQE, they | |
| * will go through the io-wq retry machinery and post one | |
| * later. | |
| */ | |
| if (!(req->flags & (REQ_F_CQE_SKIP | REQ_F_REISSUE)) && | |
| unlikely(!io_fill_cqe_req(ctx, req))) { | |
| if (ctx->int_flags & IO_RING_F_LOCKLESS_CQ) | |
| io_cqe_overflow(ctx, &req->cqe, &req->big_cqe); | |
| else | |
| io_cqe_overflow_locked(ctx, &req->cqe, &req->big_cqe); | |
| } | |
| } | |
| __io_cq_unlock_post(ctx); | |
| if (!wq_list_empty(&state->compl_reqs)) { | |
| io_free_batch_list(ctx, state->compl_reqs.first); | |
| INIT_WQ_LIST(&state->compl_reqs); | |
| } | |
| if (unlikely(ctx->int_flags & IO_RING_F_DRAIN_ACTIVE)) | |
| io_queue_deferred(ctx); | |
| ctx->submit_state.cq_flush = false; | |
| } | |
| /* | |
| * We can't just wait for polled events to come to us, we have to actively | |
| * find and complete them. | |
| */ | |
| __cold void io_iopoll_try_reap_events(struct io_ring_ctx *ctx) | |
| { | |
| if (!(ctx->flags & IORING_SETUP_IOPOLL)) | |
| return; | |
| mutex_lock(&ctx->uring_lock); | |
| while (!list_empty(&ctx->iopoll_list)) { | |
| /* let it sleep and repeat later if can't complete a request */ | |
| if (io_do_iopoll(ctx, true) == 0) | |
| break; | |
| /* | |
| * Ensure we allow local-to-the-cpu processing to take place, | |
| * in this case we need to ensure that we reap all events. | |
| * Also let task_work, etc. to progress by releasing the mutex | |
| */ | |
| if (need_resched()) { | |
| mutex_unlock(&ctx->uring_lock); | |
| cond_resched(); | |
| mutex_lock(&ctx->uring_lock); | |
| } | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) | |
| io_cancel_local_task_work(ctx); | |
| } | |
| static int io_iopoll_check(struct io_ring_ctx *ctx, unsigned int min_events) | |
| { | |
| unsigned long check_cq; | |
| min_events = min(min_events, ctx->cq_entries); | |
| lockdep_assert_held(&ctx->uring_lock); | |
| if (!io_allowed_run_tw(ctx)) | |
| return -EEXIST; | |
| check_cq = READ_ONCE(ctx->check_cq); | |
| if (unlikely(check_cq)) { | |
| if (check_cq & BIT(IO_CHECK_CQ_OVERFLOW_BIT)) | |
| __io_cqring_overflow_flush(ctx, false); | |
| /* | |
| * Similarly do not spin if we have not informed the user of any | |
| * dropped CQE. | |
| */ | |
| if (check_cq & BIT(IO_CHECK_CQ_DROPPED_BIT)) | |
| return -EBADR; | |
| } | |
| /* | |
| * Don't enter poll loop if we already have events pending. | |
| * If we do, we can potentially be spinning for commands that | |
| * already triggered a CQE (eg in error). | |
| */ | |
| if (io_cqring_events(ctx)) | |
| return 0; | |
| do { | |
| int ret = 0; | |
| /* | |
| * If a submit got punted to a workqueue, we can have the | |
| * application entering polling for a command before it gets | |
| * issued. That app will hold the uring_lock for the duration | |
| * of the poll right here, so we need to take a breather every | |
| * now and then to ensure that the issue has a chance to add | |
| * the poll to the issued list. Otherwise we can spin here | |
| * forever, while the workqueue is stuck trying to acquire the | |
| * very same mutex. | |
| */ | |
| if (list_empty(&ctx->iopoll_list) || io_task_work_pending(ctx)) { | |
| (void) io_run_local_work_locked(ctx, min_events); | |
| if (task_work_pending(current) || list_empty(&ctx->iopoll_list)) { | |
| mutex_unlock(&ctx->uring_lock); | |
| io_run_task_work(); | |
| mutex_lock(&ctx->uring_lock); | |
| } | |
| /* some requests don't go through iopoll_list */ | |
| if (list_empty(&ctx->iopoll_list)) | |
| break; | |
| } | |
| ret = io_do_iopoll(ctx, !min_events); | |
| if (unlikely(ret < 0)) | |
| return ret; | |
| if (task_sigpending(current)) | |
| return -EINTR; | |
| if (need_resched()) | |
| break; | |
| } while (io_cqring_events(ctx) < min_events); | |
| return 0; | |
| } | |
| void io_req_task_complete(struct io_tw_req tw_req, io_tw_token_t tw) | |
| { | |
| io_req_complete_defer(tw_req.req); | |
| } | |
| /* | |
| * After the iocb has been issued, it's safe to be found on the poll list. | |
| * Adding the kiocb to the list AFTER submission ensures that we don't | |
| * find it from a io_do_iopoll() thread before the issuer is done | |
| * accessing the kiocb cookie. | |
| */ | |
| static void io_iopoll_req_issued(struct io_kiocb *req, unsigned int issue_flags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| const bool needs_lock = issue_flags & IO_URING_F_UNLOCKED; | |
| /* workqueue context doesn't hold uring_lock, grab it now */ | |
| if (unlikely(needs_lock)) | |
| mutex_lock(&ctx->uring_lock); | |
| /* | |
| * Track whether we have multiple files in our lists. This will impact | |
| * how we do polling eventually, not spinning if we're on potentially | |
| * different devices. | |
| */ | |
| if (list_empty(&ctx->iopoll_list)) { | |
| ctx->poll_multi_queue = false; | |
| } else if (!ctx->poll_multi_queue) { | |
| struct io_kiocb *list_req; | |
| list_req = list_first_entry(&ctx->iopoll_list, struct io_kiocb, iopoll_node); | |
| if (list_req->file != req->file) | |
| ctx->poll_multi_queue = true; | |
| } | |
| list_add_tail(&req->iopoll_node, &ctx->iopoll_list); | |
| if (unlikely(needs_lock)) { | |
| /* | |
| * If IORING_SETUP_SQPOLL is enabled, sqes are either handle | |
| * in sq thread task context or in io worker task context. If | |
| * current task context is sq thread, we don't need to check | |
| * whether should wake up sq thread. | |
| */ | |
| if ((ctx->flags & IORING_SETUP_SQPOLL) && | |
| wq_has_sleeper(&ctx->sq_data->wait)) | |
| wake_up(&ctx->sq_data->wait); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| } | |
| io_req_flags_t io_file_get_flags(struct file *file) | |
| { | |
| io_req_flags_t res = 0; | |
| BUILD_BUG_ON(REQ_F_ISREG_BIT != REQ_F_SUPPORT_NOWAIT_BIT + 1); | |
| if (S_ISREG(file_inode(file)->i_mode)) | |
| res |= REQ_F_ISREG; | |
| if ((file->f_flags & O_NONBLOCK) || (file->f_mode & FMODE_NOWAIT)) | |
| res |= REQ_F_SUPPORT_NOWAIT; | |
| return res; | |
| } | |
| static __cold void io_drain_req(struct io_kiocb *req) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| bool drain = req->flags & IOSQE_IO_DRAIN; | |
| struct io_defer_entry *de; | |
| de = kmalloc_obj(*de, GFP_KERNEL_ACCOUNT); | |
| if (!de) { | |
| io_req_defer_failed(req, -ENOMEM); | |
| return; | |
| } | |
| io_prep_async_link(req); | |
| trace_io_uring_defer(req); | |
| de->req = req; | |
| ctx->nr_drained += io_linked_nr(req); | |
| list_add_tail(&de->list, &ctx->defer_list); | |
| io_queue_deferred(ctx); | |
| if (!drain && list_empty(&ctx->defer_list)) | |
| ctx->int_flags &= ~IO_RING_F_DRAIN_ACTIVE; | |
| } | |
| static bool io_assign_file(struct io_kiocb *req, const struct io_issue_def *def, | |
| unsigned int issue_flags) | |
| { | |
| if (req->file || !def->needs_file) | |
| return true; | |
| if (req->flags & REQ_F_FIXED_FILE) | |
| req->file = io_file_get_fixed(req, req->cqe.fd, issue_flags); | |
| else | |
| req->file = io_file_get_normal(req, req->cqe.fd); | |
| return !!req->file; | |
| } | |
| #define REQ_ISSUE_SLOW_FLAGS (REQ_F_CREDS | REQ_F_ARM_LTIMEOUT) | |
| static inline int __io_issue_sqe(struct io_kiocb *req, | |
| unsigned int issue_flags, | |
| const struct io_issue_def *def) | |
| { | |
| const struct cred *creds = NULL; | |
| struct io_kiocb *link = NULL; | |
| int ret; | |
| if (unlikely(req->flags & REQ_ISSUE_SLOW_FLAGS)) { | |
| if ((req->flags & REQ_F_CREDS) && req->creds != current_cred()) | |
| creds = override_creds(req->creds); | |
| if (req->flags & REQ_F_ARM_LTIMEOUT) | |
| link = __io_prep_linked_timeout(req); | |
| } | |
| if (!def->audit_skip) | |
| audit_uring_entry(req->opcode); | |
| ret = def->issue(req, issue_flags); | |
| if (!def->audit_skip) | |
| audit_uring_exit(!ret, ret); | |
| if (unlikely(creds || link)) { | |
| if (creds) | |
| revert_creds(creds); | |
| if (link) | |
| io_queue_linked_timeout(link); | |
| } | |
| return ret; | |
| } | |
| static int io_issue_sqe(struct io_kiocb *req, unsigned int issue_flags) | |
| { | |
| const struct io_issue_def *def = &io_issue_defs[req->opcode]; | |
| int ret; | |
| if (unlikely(!io_assign_file(req, def, issue_flags))) | |
| return -EBADF; | |
| ret = __io_issue_sqe(req, issue_flags, def); | |
| if (ret == IOU_COMPLETE) { | |
| if (issue_flags & IO_URING_F_COMPLETE_DEFER) | |
| io_req_complete_defer(req); | |
| else | |
| io_req_complete_post(req, issue_flags); | |
| return 0; | |
| } | |
| if (ret == IOU_ISSUE_SKIP_COMPLETE) { | |
| ret = 0; | |
| if (req->flags & REQ_F_IOPOLL) | |
| io_iopoll_req_issued(req, issue_flags); | |
| } | |
| return ret; | |
| } | |
| int io_poll_issue(struct io_kiocb *req, io_tw_token_t tw) | |
| { | |
| const unsigned int issue_flags = IO_URING_F_NONBLOCK | | |
| IO_URING_F_MULTISHOT | | |
| IO_URING_F_COMPLETE_DEFER; | |
| int ret; | |
| io_tw_lock(req->ctx, tw); | |
| WARN_ON_ONCE(!req->file); | |
| if (WARN_ON_ONCE(req->flags & REQ_F_IOPOLL)) | |
| return -EFAULT; | |
| ret = __io_issue_sqe(req, issue_flags, &io_issue_defs[req->opcode]); | |
| WARN_ON_ONCE(ret == IOU_ISSUE_SKIP_COMPLETE); | |
| return ret; | |
| } | |
| struct io_wq_work *io_wq_free_work(struct io_wq_work *work) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| struct io_kiocb *nxt = NULL; | |
| if (req_ref_put_and_test_atomic(req)) { | |
| if (req->flags & IO_REQ_LINK_FLAGS) { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| mutex_lock(&ctx->uring_lock); | |
| nxt = io_req_find_next(req); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| io_free_req(req); | |
| } | |
| return nxt ? &nxt->work : NULL; | |
| } | |
| void io_wq_submit_work(struct io_wq_work *work) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| const struct io_issue_def *def = &io_issue_defs[req->opcode]; | |
| unsigned int issue_flags = IO_URING_F_UNLOCKED | IO_URING_F_IOWQ; | |
| bool needs_poll = false; | |
| int ret = 0, err = -ECANCELED; | |
| /* one will be dropped by io_wq_free_work() after returning to io-wq */ | |
| if (!(req->flags & REQ_F_REFCOUNT)) | |
| __io_req_set_refcount(req, 2); | |
| else | |
| req_ref_get(req); | |
| /* either cancelled or io-wq is dying, so don't touch tctx->iowq */ | |
| if (atomic_read(&work->flags) & IO_WQ_WORK_CANCEL) { | |
| fail: | |
| io_req_task_queue_fail(req, err); | |
| return; | |
| } | |
| if (!io_assign_file(req, def, issue_flags)) { | |
| err = -EBADF; | |
| atomic_or(IO_WQ_WORK_CANCEL, &work->flags); | |
| goto fail; | |
| } | |
| /* | |
| * If DEFER_TASKRUN is set, it's only allowed to post CQEs from the | |
| * submitter task context. Final request completions are handed to the | |
| * right context, however this is not the case of auxiliary CQEs, | |
| * which is the main mean of operation for multishot requests. | |
| * Don't allow any multishot execution from io-wq. It's more restrictive | |
| * than necessary and also cleaner. | |
| */ | |
| if (req->flags & (REQ_F_MULTISHOT|REQ_F_APOLL_MULTISHOT)) { | |
| err = -EBADFD; | |
| if (!io_file_can_poll(req)) | |
| goto fail; | |
| if (req->file->f_flags & O_NONBLOCK || | |
| req->file->f_mode & FMODE_NOWAIT) { | |
| err = -ECANCELED; | |
| if (io_arm_poll_handler(req, issue_flags) != IO_APOLL_OK) | |
| goto fail; | |
| return; | |
| } else { | |
| req->flags &= ~(REQ_F_APOLL_MULTISHOT|REQ_F_MULTISHOT); | |
| } | |
| } | |
| if (req->flags & REQ_F_FORCE_ASYNC) { | |
| bool opcode_poll = def->pollin || def->pollout; | |
| if (opcode_poll && io_file_can_poll(req)) { | |
| needs_poll = true; | |
| issue_flags |= IO_URING_F_NONBLOCK; | |
| } | |
| } | |
| do { | |
| ret = io_issue_sqe(req, issue_flags); | |
| if (ret != -EAGAIN) | |
| break; | |
| /* | |
| * If REQ_F_NOWAIT is set, then don't wait or retry with | |
| * poll. -EAGAIN is final for that case. | |
| */ | |
| if (req->flags & REQ_F_NOWAIT) | |
| break; | |
| /* | |
| * We can get EAGAIN for iopolled IO even though we're | |
| * forcing a sync submission from here, since we can't | |
| * wait for request slots on the block side. | |
| */ | |
| if (!needs_poll) { | |
| if (!(req->flags & REQ_F_IOPOLL)) | |
| break; | |
| if (io_wq_worker_stopped()) | |
| break; | |
| cond_resched(); | |
| continue; | |
| } | |
| if (io_arm_poll_handler(req, issue_flags) == IO_APOLL_OK) | |
| return; | |
| /* aborted or ready, in either case retry blocking */ | |
| needs_poll = false; | |
| issue_flags &= ~IO_URING_F_NONBLOCK; | |
| } while (1); | |
| /* avoid locking problems by failing it from a clean context */ | |
| if (ret) | |
| io_req_task_queue_fail(req, ret); | |
| } | |
| inline struct file *io_file_get_fixed(struct io_kiocb *req, int fd, | |
| unsigned int issue_flags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_rsrc_node *node; | |
| struct file *file = NULL; | |
| io_ring_submit_lock(ctx, issue_flags); | |
| node = io_rsrc_node_lookup(&ctx->file_table.data, fd); | |
| if (node) { | |
| node->refs++; | |
| req->file_node = node; | |
| req->flags |= io_slot_flags(node); | |
| file = io_slot_file(node); | |
| } | |
| io_ring_submit_unlock(ctx, issue_flags); | |
| return file; | |
| } | |
| struct file *io_file_get_normal(struct io_kiocb *req, int fd) | |
| { | |
| struct file *file = fget(fd); | |
| trace_io_uring_file_get(req, fd); | |
| /* we don't allow fixed io_uring files */ | |
| if (file && io_is_uring_fops(file)) | |
| io_req_track_inflight(req); | |
| return file; | |
| } | |
| static int io_req_sqe_copy(struct io_kiocb *req, unsigned int issue_flags) | |
| { | |
| const struct io_cold_def *def = &io_cold_defs[req->opcode]; | |
| if (req->flags & REQ_F_SQE_COPIED) | |
| return 0; | |
| req->flags |= REQ_F_SQE_COPIED; | |
| if (!def->sqe_copy) | |
| return 0; | |
| if (WARN_ON_ONCE(!(issue_flags & IO_URING_F_INLINE))) | |
| return -EFAULT; | |
| def->sqe_copy(req); | |
| return 0; | |
| } | |
| static void io_queue_async(struct io_kiocb *req, unsigned int issue_flags, int ret) | |
| __must_hold(&req->ctx->uring_lock) | |
| { | |
| if (ret != -EAGAIN || (req->flags & REQ_F_NOWAIT)) { | |
| fail: | |
| io_req_defer_failed(req, ret); | |
| return; | |
| } | |
| ret = io_req_sqe_copy(req, issue_flags); | |
| if (unlikely(ret)) | |
| goto fail; | |
| switch (io_arm_poll_handler(req, 0)) { | |
| case IO_APOLL_READY: | |
| io_req_task_queue(req); | |
| break; | |
| case IO_APOLL_ABORTED: | |
| io_queue_iowq(req); | |
| break; | |
| case IO_APOLL_OK: | |
| break; | |
| } | |
| } | |
| static inline void io_queue_sqe(struct io_kiocb *req, unsigned int extra_flags) | |
| __must_hold(&req->ctx->uring_lock) | |
| { | |
| unsigned int issue_flags = IO_URING_F_NONBLOCK | | |
| IO_URING_F_COMPLETE_DEFER | extra_flags; | |
| int ret; | |
| ret = io_issue_sqe(req, issue_flags); | |
| /* | |
| * We async punt it if the file wasn't marked NOWAIT, or if the file | |
| * doesn't support non-blocking read/write attempts | |
| */ | |
| if (unlikely(ret)) | |
| io_queue_async(req, issue_flags, ret); | |
| } | |
| static void io_queue_sqe_fallback(struct io_kiocb *req) | |
| __must_hold(&req->ctx->uring_lock) | |
| { | |
| if (unlikely(req->flags & REQ_F_FAIL)) { | |
| /* | |
| * We don't submit, fail them all, for that replace hardlinks | |
| * with normal links. Extra REQ_F_LINK is tolerated. | |
| */ | |
| req->flags &= ~REQ_F_HARDLINK; | |
| req->flags |= REQ_F_LINK; | |
| io_req_defer_failed(req, req->cqe.res); | |
| } else { | |
| /* can't fail with IO_URING_F_INLINE */ | |
| io_req_sqe_copy(req, IO_URING_F_INLINE); | |
| if (unlikely(req->ctx->int_flags & IO_RING_F_DRAIN_ACTIVE)) | |
| io_drain_req(req); | |
| else | |
| io_queue_iowq(req); | |
| } | |
| } | |
| /* | |
| * Check SQE restrictions (opcode and flags). | |
| * | |
| * Returns 'true' if SQE is allowed, 'false' otherwise. | |
| */ | |
| static inline bool io_check_restriction(struct io_ring_ctx *ctx, | |
| struct io_kiocb *req, | |
| unsigned int sqe_flags) | |
| { | |
| if (!(ctx->int_flags & IO_RING_F_OP_RESTRICTED)) | |
| return true; | |
| if (!test_bit(req->opcode, ctx->restrictions.sqe_op)) | |
| return false; | |
| if ((sqe_flags & ctx->restrictions.sqe_flags_required) != | |
| ctx->restrictions.sqe_flags_required) | |
| return false; | |
| if (sqe_flags & ~(ctx->restrictions.sqe_flags_allowed | | |
| ctx->restrictions.sqe_flags_required)) | |
| return false; | |
| return true; | |
| } | |
| static void io_init_drain(struct io_ring_ctx *ctx) | |
| { | |
| struct io_kiocb *head = ctx->submit_state.link.head; | |
| ctx->int_flags |= IO_RING_F_DRAIN_ACTIVE; | |
| if (head) { | |
| /* | |
| * If we need to drain a request in the middle of a link, drain | |
| * the head request and the next request/link after the current | |
| * link. Considering sequential execution of links, | |
| * REQ_F_IO_DRAIN will be maintained for every request of our | |
| * link. | |
| */ | |
| head->flags |= REQ_F_IO_DRAIN | REQ_F_FORCE_ASYNC; | |
| ctx->int_flags |= IO_RING_F_DRAIN_NEXT; | |
| } | |
| } | |
| static __cold int io_init_fail_req(struct io_kiocb *req, int err) | |
| { | |
| /* ensure per-opcode data is cleared if we fail before prep */ | |
| memset(&req->cmd.data, 0, sizeof(req->cmd.data)); | |
| return err; | |
| } | |
| static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| const struct io_uring_sqe *sqe, unsigned int *left) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| const struct io_issue_def *def; | |
| unsigned int sqe_flags; | |
| int personality; | |
| req->ctx = ctx; | |
| req->opcode = READ_ONCE(sqe->opcode); | |
| /* same numerical values with corresponding REQ_F_*, safe to copy */ | |
| sqe_flags = READ_ONCE(sqe->flags); | |
| req->flags = (__force io_req_flags_t) sqe_flags; | |
| req->cqe.user_data = READ_ONCE(sqe->user_data); | |
| req->file = NULL; | |
| req->tctx = current->io_uring; | |
| req->cancel_seq_set = false; | |
| req->async_data = NULL; | |
| if (unlikely(req->opcode >= IORING_OP_LAST)) { | |
| req->opcode = 0; | |
| return io_init_fail_req(req, -EINVAL); | |
| } | |
| req->opcode = array_index_nospec(req->opcode, IORING_OP_LAST); | |
| def = &io_issue_defs[req->opcode]; | |
| if (def->is_128 && !(ctx->flags & IORING_SETUP_SQE128)) { | |
| /* | |
| * A 128b op on a non-128b SQ requires mixed SQE support as | |
| * well as 2 contiguous entries. | |
| */ | |
| if (!(ctx->flags & IORING_SETUP_SQE_MIXED) || *left < 2 || | |
| (unsigned)(sqe - ctx->sq_sqes) >= ctx->sq_entries - 1) | |
| return io_init_fail_req(req, -EINVAL); | |
| /* | |
| * A 128b operation on a mixed SQ uses two entries, so we have | |
| * to increment the head and cached refs, and decrement what's | |
| * left. | |
| */ | |
| current->io_uring->cached_refs++; | |
| ctx->cached_sq_head++; | |
| (*left)--; | |
| } | |
| if (unlikely(sqe_flags & ~SQE_COMMON_FLAGS)) { | |
| /* enforce forwards compatibility on users */ | |
| if (sqe_flags & ~SQE_VALID_FLAGS) | |
| return io_init_fail_req(req, -EINVAL); | |
| if (sqe_flags & IOSQE_BUFFER_SELECT) { | |
| if (!def->buffer_select) | |
| return io_init_fail_req(req, -EOPNOTSUPP); | |
| req->buf_index = READ_ONCE(sqe->buf_group); | |
| } | |
| if (sqe_flags & IOSQE_CQE_SKIP_SUCCESS) | |
| ctx->int_flags |= IO_RING_F_DRAIN_DISABLED; | |
| if (sqe_flags & IOSQE_IO_DRAIN) { | |
| if (ctx->int_flags & IO_RING_F_DRAIN_DISABLED) | |
| return io_init_fail_req(req, -EOPNOTSUPP); | |
| io_init_drain(ctx); | |
| } | |
| } | |
| if (unlikely(ctx->int_flags & (IO_RING_F_OP_RESTRICTED | IO_RING_F_DRAIN_ACTIVE | IO_RING_F_DRAIN_NEXT))) { | |
| if (!io_check_restriction(ctx, req, sqe_flags)) | |
| return io_init_fail_req(req, -EACCES); | |
| /* knock it to the slow queue path, will be drained there */ | |
| if (ctx->int_flags & IO_RING_F_DRAIN_ACTIVE) | |
| req->flags |= REQ_F_FORCE_ASYNC; | |
| /* if there is no link, we're at "next" request and need to drain */ | |
| if (unlikely(ctx->int_flags & IO_RING_F_DRAIN_NEXT) && !ctx->submit_state.link.head) { | |
| ctx->int_flags &= ~IO_RING_F_DRAIN_NEXT; | |
| ctx->int_flags |= IO_RING_F_DRAIN_ACTIVE; | |
| req->flags |= REQ_F_IO_DRAIN | REQ_F_FORCE_ASYNC; | |
| } | |
| } | |
| if (!def->ioprio && sqe->ioprio) | |
| return io_init_fail_req(req, -EINVAL); | |
| if (!def->iopoll && (ctx->flags & IORING_SETUP_IOPOLL)) | |
| return io_init_fail_req(req, -EINVAL); | |
| if (def->needs_file) { | |
| struct io_submit_state *state = &ctx->submit_state; | |
| req->cqe.fd = READ_ONCE(sqe->fd); | |
| /* | |
| * Plug now if we have more than 2 IO left after this, and the | |
| * target is potentially a read/write to block based storage. | |
| */ | |
| if (state->need_plug && def->plug) { | |
| state->plug_started = true; | |
| state->need_plug = false; | |
| blk_start_plug_nr_ios(&state->plug, state->submit_nr); | |
| } | |
| } | |
| personality = READ_ONCE(sqe->personality); | |
| if (personality) { | |
| int ret; | |
| req->creds = xa_load(&ctx->personalities, personality); | |
| if (!req->creds) | |
| return io_init_fail_req(req, -EINVAL); | |
| get_cred(req->creds); | |
| ret = security_uring_override_creds(req->creds); | |
| if (ret) { | |
| put_cred(req->creds); | |
| return io_init_fail_req(req, ret); | |
| } | |
| req->flags |= REQ_F_CREDS; | |
| } | |
| return def->prep(req, sqe); | |
| } | |
| static __cold int io_submit_fail_init(const struct io_uring_sqe *sqe, | |
| struct io_kiocb *req, int ret) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_submit_link *link = &ctx->submit_state.link; | |
| struct io_kiocb *head = link->head; | |
| trace_io_uring_req_failed(sqe, req, ret); | |
| /* | |
| * Avoid breaking links in the middle as it renders links with SQPOLL | |
| * unusable. Instead of failing eagerly, continue assembling the link if | |
| * applicable and mark the head with REQ_F_FAIL. The link flushing code | |
| * should find the flag and handle the rest. | |
| */ | |
| req_fail_link_node(req, ret); | |
| if (head && !(head->flags & REQ_F_FAIL)) | |
| req_fail_link_node(head, -ECANCELED); | |
| if (!(req->flags & IO_REQ_LINK_FLAGS)) { | |
| if (head) { | |
| link->last->link = req; | |
| link->head = NULL; | |
| req = head; | |
| } | |
| io_queue_sqe_fallback(req); | |
| return ret; | |
| } | |
| if (head) | |
| link->last->link = req; | |
| else | |
| link->head = req; | |
| link->last = req; | |
| return 0; | |
| } | |
| static inline int io_submit_sqe(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| const struct io_uring_sqe *sqe, unsigned int *left) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_submit_link *link = &ctx->submit_state.link; | |
| int ret; | |
| ret = io_init_req(ctx, req, sqe, left); | |
| if (unlikely(ret)) | |
| return io_submit_fail_init(sqe, req, ret); | |
| if (unlikely(ctx->bpf_filters)) { | |
| ret = io_uring_run_bpf_filters(ctx->bpf_filters, req); | |
| if (ret) | |
| return io_submit_fail_init(sqe, req, ret); | |
| } | |
| trace_io_uring_submit_req(req); | |
| /* | |
| * If we already have a head request, queue this one for async | |
| * submittal once the head completes. If we don't have a head but | |
| * IOSQE_IO_LINK is set in the sqe, start a new head. This one will be | |
| * submitted sync once the chain is complete. If none of those | |
| * conditions are true (normal request), then just queue it. | |
| */ | |
| if (unlikely(link->head)) { | |
| trace_io_uring_link(req, link->last); | |
| io_req_sqe_copy(req, IO_URING_F_INLINE); | |
| link->last->link = req; | |
| link->last = req; | |
| if (req->flags & IO_REQ_LINK_FLAGS) | |
| return 0; | |
| /* last request of the link, flush it */ | |
| req = link->head; | |
| link->head = NULL; | |
| if (req->flags & (REQ_F_FORCE_ASYNC | REQ_F_FAIL)) | |
| goto fallback; | |
| } else if (unlikely(req->flags & (IO_REQ_LINK_FLAGS | | |
| REQ_F_FORCE_ASYNC | REQ_F_FAIL))) { | |
| if (req->flags & IO_REQ_LINK_FLAGS) { | |
| link->head = req; | |
| link->last = req; | |
| } else { | |
| fallback: | |
| io_queue_sqe_fallback(req); | |
| } | |
| return 0; | |
| } | |
| io_queue_sqe(req, IO_URING_F_INLINE); | |
| return 0; | |
| } | |
| /* | |
| * Batched submission is done, ensure local IO is flushed out. | |
| */ | |
| static void io_submit_state_end(struct io_ring_ctx *ctx) | |
| { | |
| struct io_submit_state *state = &ctx->submit_state; | |
| if (unlikely(state->link.head)) | |
| io_queue_sqe_fallback(state->link.head); | |
| /* flush only after queuing links as they can generate completions */ | |
| io_submit_flush_completions(ctx); | |
| if (state->plug_started) | |
| blk_finish_plug(&state->plug); | |
| } | |
| /* | |
| * Start submission side cache. | |
| */ | |
| static void io_submit_state_start(struct io_submit_state *state, | |
| unsigned int max_ios) | |
| { | |
| state->plug_started = false; | |
| state->need_plug = max_ios > 2; | |
| state->submit_nr = max_ios; | |
| /* set only head, no need to init link_last in advance */ | |
| state->link.head = NULL; | |
| } | |
| static void io_commit_sqring(struct io_ring_ctx *ctx) | |
| { | |
| struct io_rings *rings = ctx->rings; | |
| if (ctx->flags & IORING_SETUP_SQ_REWIND) { | |
| ctx->cached_sq_head = 0; | |
| } else { | |
| /* | |
| * Ensure any loads from the SQEs are done at this point, | |
| * since once we write the new head, the application could | |
| * write new data to them. | |
| */ | |
| smp_store_release(&rings->sq.head, ctx->cached_sq_head); | |
| } | |
| } | |
| /* | |
| * Fetch an sqe, if one is available. Note this returns a pointer to memory | |
| * that is mapped by userspace. This means that care needs to be taken to | |
| * ensure that reads are stable, as we cannot rely on userspace always | |
| * being a good citizen. If members of the sqe are validated and then later | |
| * used, it's important that those reads are done through READ_ONCE() to | |
| * prevent a re-load down the line. | |
| */ | |
| static bool io_get_sqe(struct io_ring_ctx *ctx, const struct io_uring_sqe **sqe) | |
| { | |
| unsigned mask = ctx->sq_entries - 1; | |
| unsigned head = ctx->cached_sq_head++ & mask; | |
| if (static_branch_unlikely(&io_key_has_sqarray.key) && | |
| (!(ctx->flags & IORING_SETUP_NO_SQARRAY))) { | |
| head = READ_ONCE(ctx->sq_array[head]); | |
| if (unlikely(head >= ctx->sq_entries)) { | |
| WRITE_ONCE(ctx->rings->sq_dropped, | |
| READ_ONCE(ctx->rings->sq_dropped) + 1); | |
| return false; | |
| } | |
| head = array_index_nospec(head, ctx->sq_entries); | |
| } | |
| /* | |
| * The cached sq head (or cq tail) serves two purposes: | |
| * | |
| * 1) allows us to batch the cost of updating the user visible | |
| * head updates. | |
| * 2) allows the kernel side to track the head on its own, even | |
| * though the application is the one updating it. | |
| */ | |
| /* double index for 128-byte SQEs, twice as long */ | |
| if (ctx->flags & IORING_SETUP_SQE128) | |
| head <<= 1; | |
| *sqe = &ctx->sq_sqes[head]; | |
| return true; | |
| } | |
| int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| unsigned int entries; | |
| unsigned int left; | |
| int ret; | |
| if (ctx->flags & IORING_SETUP_SQ_REWIND) | |
| entries = ctx->sq_entries; | |
| else | |
| entries = __io_sqring_entries(ctx); | |
| entries = min(nr, entries); | |
| if (unlikely(!entries)) | |
| return 0; | |
| ret = left = entries; | |
| io_get_task_refs(left); | |
| io_submit_state_start(&ctx->submit_state, left); | |
| do { | |
| const struct io_uring_sqe *sqe; | |
| struct io_kiocb *req; | |
| if (unlikely(!io_alloc_req(ctx, &req))) | |
| break; | |
| if (unlikely(!io_get_sqe(ctx, &sqe))) { | |
| io_req_add_to_cache(req, ctx); | |
| break; | |
| } | |
| /* | |
| * Continue submitting even for sqe failure if the | |
| * ring was setup with IORING_SETUP_SUBMIT_ALL | |
| */ | |
| if (unlikely(io_submit_sqe(ctx, req, sqe, &left)) && | |
| !(ctx->flags & IORING_SETUP_SUBMIT_ALL)) { | |
| left--; | |
| break; | |
| } | |
| } while (--left); | |
| if (unlikely(left)) { | |
| ret -= left; | |
| /* try again if it submitted nothing and can't allocate a req */ | |
| if (!ret && io_req_cache_empty(ctx)) | |
| ret = -EAGAIN; | |
| current->io_uring->cached_refs += left; | |
| } | |
| io_submit_state_end(ctx); | |
| /* Commit SQ ring head once we've consumed and submitted all SQEs */ | |
| io_commit_sqring(ctx); | |
| return ret; | |
| } | |
| static void io_rings_free(struct io_ring_ctx *ctx) | |
| { | |
| /* ring memory is not charged to RLIMIT_MEMLOCK, hence no user */ | |
| io_free_region(NULL, &ctx->sq_region); | |
| io_free_region(NULL, &ctx->ring_region); | |
| ctx->rings = NULL; | |
| RCU_INIT_POINTER(ctx->rings_rcu, NULL); | |
| ctx->sq_sqes = NULL; | |
| } | |
| static int rings_size(unsigned int flags, unsigned int sq_entries, | |
| unsigned int cq_entries, struct io_rings_layout *rl) | |
| { | |
| struct io_rings *rings; | |
| size_t sqe_size; | |
| size_t off; | |
| if (flags & IORING_SETUP_CQE_MIXED) { | |
| if (cq_entries < 2) | |
| return -EOVERFLOW; | |
| } | |
| if (flags & IORING_SETUP_SQE_MIXED) { | |
| if (sq_entries < 2) | |
| return -EOVERFLOW; | |
| } | |
| rl->sq_array_offset = SIZE_MAX; | |
| sqe_size = sizeof(struct io_uring_sqe); | |
| if (flags & IORING_SETUP_SQE128) | |
| sqe_size *= 2; | |
| rl->sq_size = array_size(sqe_size, sq_entries); | |
| if (rl->sq_size == SIZE_MAX) | |
| return -EOVERFLOW; | |
| off = struct_size(rings, cqes, cq_entries); | |
| if (flags & IORING_SETUP_CQE32) | |
| off = size_mul(off, 2); | |
| if (off == SIZE_MAX) | |
| return -EOVERFLOW; | |
| #ifdef CONFIG_SMP | |
| off = ALIGN(off, SMP_CACHE_BYTES); | |
| if (off == 0) | |
| return -EOVERFLOW; | |
| #endif | |
| if (!(flags & IORING_SETUP_NO_SQARRAY)) { | |
| size_t sq_array_size; | |
| rl->sq_array_offset = off; | |
| sq_array_size = array_size(sizeof(u32), sq_entries); | |
| off = size_add(off, sq_array_size); | |
| if (off == SIZE_MAX) | |
| return -EOVERFLOW; | |
| } | |
| rl->rings_size = off; | |
| return 0; | |
| } | |
| static __cold void __io_req_caches_free(struct io_ring_ctx *ctx) | |
| { | |
| struct io_kiocb *req; | |
| int nr = 0; | |
| while (!io_req_cache_empty(ctx)) { | |
| req = io_extract_req(ctx); | |
| io_poison_req(req); | |
| kmem_cache_free(req_cachep, req); | |
| nr++; | |
| } | |
| if (nr) { | |
| ctx->nr_req_allocated -= nr; | |
| percpu_ref_put_many(&ctx->refs, nr); | |
| } | |
| } | |
| static __cold void io_req_caches_free(struct io_ring_ctx *ctx) | |
| { | |
| guard(mutex)(&ctx->uring_lock); | |
| __io_req_caches_free(ctx); | |
| } | |
| static __cold void io_ring_ctx_free(struct io_ring_ctx *ctx) | |
| { | |
| io_unregister_bpf_ops(ctx); | |
| io_sq_thread_finish(ctx); | |
| mutex_lock(&ctx->uring_lock); | |
| io_sqe_buffers_unregister(ctx); | |
| io_sqe_files_unregister(ctx); | |
| io_unregister_zcrx(ctx); | |
| io_cqring_overflow_kill(ctx); | |
| io_eventfd_unregister(ctx); | |
| io_free_alloc_caches(ctx); | |
| io_destroy_buffers(ctx); | |
| io_free_region(ctx->user, &ctx->param_region); | |
| mutex_unlock(&ctx->uring_lock); | |
| if (ctx->sq_creds) | |
| put_cred(ctx->sq_creds); | |
| if (ctx->submitter_task) | |
| put_task_struct(ctx->submitter_task); | |
| WARN_ON_ONCE(!list_empty(&ctx->ltimeout_list)); | |
| if (ctx->mm_account) { | |
| mmdrop(ctx->mm_account); | |
| ctx->mm_account = NULL; | |
| } | |
| io_rings_free(ctx); | |
| if (!(ctx->flags & IORING_SETUP_NO_SQARRAY)) | |
| static_branch_slow_dec_deferred(&io_key_has_sqarray); | |
| percpu_ref_exit(&ctx->refs); | |
| free_uid(ctx->user); | |
| io_req_caches_free(ctx); | |
| if (ctx->restrictions.bpf_filters) { | |
| WARN_ON_ONCE(ctx->bpf_filters != | |
| ctx->restrictions.bpf_filters->filters); | |
| } else { | |
| WARN_ON_ONCE(ctx->bpf_filters); | |
| } | |
| io_put_bpf_filters(&ctx->restrictions); | |
| WARN_ON_ONCE(ctx->nr_req_allocated); | |
| if (ctx->hash_map) | |
| io_wq_put_hash(ctx->hash_map); | |
| io_napi_free(ctx); | |
| kvfree(ctx->cancel_table.hbs); | |
| xa_destroy(&ctx->io_bl_xa); | |
| xa_destroy(&ctx->hpage_acct); | |
| kfree(ctx); | |
| } | |
| static __cold void io_activate_pollwq_cb(struct callback_head *cb) | |
| { | |
| struct io_ring_ctx *ctx = container_of(cb, struct io_ring_ctx, | |
| poll_wq_task_work); | |
| mutex_lock(&ctx->uring_lock); | |
| ctx->int_flags |= IO_RING_F_POLL_ACTIVATED; | |
| mutex_unlock(&ctx->uring_lock); | |
| /* | |
| * Wake ups for some events between start of polling and activation | |
| * might've been lost due to loose synchronisation. | |
| */ | |
| wake_up_all(&ctx->poll_wq); | |
| percpu_ref_put(&ctx->refs); | |
| } | |
| __cold void io_activate_pollwq(struct io_ring_ctx *ctx) | |
| { | |
| spin_lock(&ctx->completion_lock); | |
| /* already activated or in progress */ | |
| if ((ctx->int_flags & IO_RING_F_POLL_ACTIVATED) || ctx->poll_wq_task_work.func) | |
| goto out; | |
| if (WARN_ON_ONCE(!(ctx->int_flags & IO_RING_F_TASK_COMPLETE))) | |
| goto out; | |
| if (!ctx->submitter_task) | |
| goto out; | |
| /* | |
| * with ->submitter_task only the submitter task completes requests, we | |
| * only need to sync with it, which is done by injecting a tw | |
| */ | |
| init_task_work(&ctx->poll_wq_task_work, io_activate_pollwq_cb); | |
| percpu_ref_get(&ctx->refs); | |
| if (task_work_add(ctx->submitter_task, &ctx->poll_wq_task_work, TWA_SIGNAL)) | |
| percpu_ref_put(&ctx->refs); | |
| out: | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| static __poll_t io_uring_poll(struct file *file, poll_table *wait) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| __poll_t mask = 0; | |
| if (unlikely(!(data_race(ctx->int_flags) & IO_RING_F_POLL_ACTIVATED))) | |
| io_activate_pollwq(ctx); | |
| /* | |
| * provides mb() which pairs with barrier from wq_has_sleeper | |
| * call in io_commit_cqring | |
| */ | |
| poll_wait(file, &ctx->poll_wq, wait); | |
| rcu_read_lock(); | |
| if (!__io_sqring_full(ctx)) | |
| mask |= EPOLLOUT | EPOLLWRNORM; | |
| /* | |
| * Don't flush cqring overflow list here, just do a simple check. | |
| * Otherwise there could possible be ABBA deadlock: | |
| * CPU0 CPU1 | |
| * ---- ---- | |
| * lock(&ctx->uring_lock); | |
| * lock(&ep->mtx); | |
| * lock(&ctx->uring_lock); | |
| * lock(&ep->mtx); | |
| * | |
| * Users may get EPOLLIN meanwhile seeing nothing in cqring, this | |
| * pushes them to do the flush. | |
| */ | |
| if (__io_cqring_events_user(ctx) || io_has_work(ctx)) | |
| mask |= EPOLLIN | EPOLLRDNORM; | |
| rcu_read_unlock(); | |
| return mask; | |
| } | |
| struct io_tctx_exit { | |
| struct callback_head task_work; | |
| struct completion completion; | |
| struct io_ring_ctx *ctx; | |
| }; | |
| static __cold void io_tctx_exit_cb(struct callback_head *cb) | |
| { | |
| struct io_uring_task *tctx = current->io_uring; | |
| struct io_tctx_exit *work; | |
| work = container_of(cb, struct io_tctx_exit, task_work); | |
| /* | |
| * When @in_cancel, we're in cancellation and it's racy to remove the | |
| * node. It'll be removed by the end of cancellation, just ignore it. | |
| * tctx can be NULL if the queueing of this task_work raced with | |
| * work cancelation off the exec path. | |
| */ | |
| if (tctx && !atomic_read(&tctx->in_cancel)) | |
| io_uring_del_tctx_node((unsigned long)work->ctx); | |
| complete(&work->completion); | |
| } | |
| static __cold void io_ring_exit_work(struct work_struct *work) | |
| { | |
| struct io_ring_ctx *ctx = container_of(work, struct io_ring_ctx, exit_work); | |
| unsigned long timeout = jiffies + IO_URING_EXIT_WAIT_MAX; | |
| unsigned long interval = HZ / 20; | |
| struct io_tctx_exit exit; | |
| struct io_tctx_node *node; | |
| int ret; | |
| mutex_lock(&ctx->uring_lock); | |
| io_terminate_zcrx(ctx); | |
| mutex_unlock(&ctx->uring_lock); | |
| /* | |
| * If we're doing polled IO and end up having requests being | |
| * submitted async (out-of-line), then completions can come in while | |
| * we're waiting for refs to drop. We need to reap these manually, | |
| * as nobody else will be looking for them. | |
| */ | |
| do { | |
| if (test_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq)) { | |
| mutex_lock(&ctx->uring_lock); | |
| io_cqring_overflow_kill(ctx); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| /* The SQPOLL thread never reaches this path */ | |
| do { | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) | |
| io_cancel_local_task_work(ctx); | |
| cond_resched(); | |
| } while (io_uring_try_cancel_requests(ctx, NULL, true, false)); | |
| if (ctx->sq_data) { | |
| struct io_sq_data *sqd = ctx->sq_data; | |
| struct task_struct *tsk; | |
| io_sq_thread_park(sqd); | |
| tsk = sqpoll_task_locked(sqd); | |
| if (tsk && tsk->io_uring && tsk->io_uring->io_wq) | |
| io_wq_cancel_cb(tsk->io_uring->io_wq, | |
| io_cancel_ctx_cb, ctx, true); | |
| io_sq_thread_unpark(sqd); | |
| } | |
| io_req_caches_free(ctx); | |
| if (WARN_ON_ONCE(time_after(jiffies, timeout))) { | |
| /* there is little hope left, don't run it too often */ | |
| interval = HZ * 60; | |
| } | |
| /* | |
| * This is really an uninterruptible wait, as it has to be | |
| * complete. But it's also run from a kworker, which doesn't | |
| * take signals, so it's fine to make it interruptible. This | |
| * avoids scenarios where we knowingly can wait much longer | |
| * on completions, for example if someone does a SIGSTOP on | |
| * a task that needs to finish task_work to make this loop | |
| * complete. That's a synthetic situation that should not | |
| * cause a stuck task backtrace, and hence a potential panic | |
| * on stuck tasks if that is enabled. | |
| */ | |
| } while (!wait_for_completion_interruptible_timeout(&ctx->ref_comp, interval)); | |
| init_completion(&exit.completion); | |
| init_task_work(&exit.task_work, io_tctx_exit_cb); | |
| exit.ctx = ctx; | |
| mutex_lock(&ctx->uring_lock); | |
| mutex_lock(&ctx->tctx_lock); | |
| while (!list_empty(&ctx->tctx_list)) { | |
| WARN_ON_ONCE(time_after(jiffies, timeout)); | |
| node = list_first_entry(&ctx->tctx_list, struct io_tctx_node, | |
| ctx_node); | |
| /* don't spin on a single task if cancellation failed */ | |
| list_rotate_left(&ctx->tctx_list); | |
| ret = task_work_add(node->task, &exit.task_work, TWA_SIGNAL); | |
| if (WARN_ON_ONCE(ret)) | |
| continue; | |
| mutex_unlock(&ctx->tctx_lock); | |
| mutex_unlock(&ctx->uring_lock); | |
| /* | |
| * See comment above for | |
| * wait_for_completion_interruptible_timeout() on why this | |
| * wait is marked as interruptible. | |
| */ | |
| wait_for_completion_interruptible(&exit.completion); | |
| mutex_lock(&ctx->uring_lock); | |
| mutex_lock(&ctx->tctx_lock); | |
| } | |
| mutex_unlock(&ctx->tctx_lock); | |
| mutex_unlock(&ctx->uring_lock); | |
| spin_lock(&ctx->completion_lock); | |
| spin_unlock(&ctx->completion_lock); | |
| /* pairs with the RCU read sections in the task_work add paths */ | |
| if (ctx->flags & (IORING_SETUP_DEFER_TASKRUN | IORING_SETUP_SQPOLL)) | |
| synchronize_rcu(); | |
| io_ring_ctx_free(ctx); | |
| } | |
| static __cold void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx) | |
| { | |
| unsigned long index; | |
| struct cred *creds; | |
| mutex_lock(&ctx->uring_lock); | |
| percpu_ref_kill(&ctx->refs); | |
| xa_for_each(&ctx->personalities, index, creds) | |
| io_unregister_personality(ctx, index); | |
| mutex_unlock(&ctx->uring_lock); | |
| INIT_WORK(&ctx->exit_work, io_ring_exit_work); | |
| /* | |
| * Use system_dfl_wq to avoid spawning tons of event kworkers | |
| * if we're exiting a ton of rings at the same time. It just adds | |
| * noise and overhead, there's no discernable change in runtime | |
| * over using system_percpu_wq. | |
| */ | |
| queue_work(iou_wq, &ctx->exit_work); | |
| } | |
| static int io_uring_release(struct inode *inode, struct file *file) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| file->private_data = NULL; | |
| io_ring_ctx_wait_and_kill(ctx); | |
| return 0; | |
| } | |
| static struct io_uring_reg_wait *io_get_ext_arg_reg(struct io_ring_ctx *ctx, | |
| const struct io_uring_getevents_arg __user *uarg) | |
| { | |
| unsigned long size = sizeof(struct io_uring_reg_wait); | |
| unsigned long offset = (uintptr_t)uarg; | |
| unsigned long end; | |
| if (unlikely(offset % sizeof(long))) | |
| return ERR_PTR(-EFAULT); | |
| /* also protects from NULL ->cq_wait_arg as the size would be 0 */ | |
| if (unlikely(check_add_overflow(offset, size, &end) || | |
| end > ctx->cq_wait_size)) | |
| return ERR_PTR(-EFAULT); | |
| offset = array_index_nospec(offset, ctx->cq_wait_size - size); | |
| return ctx->cq_wait_arg + offset; | |
| } | |
| static int io_validate_ext_arg(struct io_ring_ctx *ctx, unsigned flags, | |
| const void __user *argp, size_t argsz) | |
| { | |
| struct io_uring_getevents_arg arg; | |
| if (!(flags & IORING_ENTER_EXT_ARG)) | |
| return 0; | |
| if (flags & IORING_ENTER_EXT_ARG_REG) | |
| return -EINVAL; | |
| if (argsz != sizeof(arg)) | |
| return -EINVAL; | |
| if (copy_from_user(&arg, argp, sizeof(arg))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int io_get_ext_arg(struct io_ring_ctx *ctx, unsigned flags, | |
| const void __user *argp, struct ext_arg *ext_arg) | |
| { | |
| const struct io_uring_getevents_arg __user *uarg = argp; | |
| struct io_uring_getevents_arg arg; | |
| ext_arg->iowait = !(flags & IORING_ENTER_NO_IOWAIT); | |
| /* | |
| * If EXT_ARG isn't set, then we have no timespec and the argp pointer | |
| * is just a pointer to the sigset_t. | |
| */ | |
| if (!(flags & IORING_ENTER_EXT_ARG)) { | |
| ext_arg->sig = (const sigset_t __user *) argp; | |
| return 0; | |
| } | |
| if (flags & IORING_ENTER_EXT_ARG_REG) { | |
| struct io_uring_reg_wait *w; | |
| if (ext_arg->argsz != sizeof(struct io_uring_reg_wait)) | |
| return -EINVAL; | |
| w = io_get_ext_arg_reg(ctx, argp); | |
| if (IS_ERR(w)) | |
| return PTR_ERR(w); | |
| if (w->flags & ~IORING_REG_WAIT_TS) | |
| return -EINVAL; | |
| ext_arg->min_time = READ_ONCE(w->min_wait_usec) * NSEC_PER_USEC; | |
| ext_arg->sig = u64_to_user_ptr(READ_ONCE(w->sigmask)); | |
| ext_arg->argsz = READ_ONCE(w->sigmask_sz); | |
| if (w->flags & IORING_REG_WAIT_TS) { | |
| ext_arg->ts.tv_sec = READ_ONCE(w->ts.tv_sec); | |
| ext_arg->ts.tv_nsec = READ_ONCE(w->ts.tv_nsec); | |
| ext_arg->ts_set = true; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * EXT_ARG is set - ensure we agree on the size of it and copy in our | |
| * timespec and sigset_t pointers if good. | |
| */ | |
| if (ext_arg->argsz != sizeof(arg)) | |
| return -EINVAL; | |
| #ifdef CONFIG_64BIT | |
| if (!user_access_begin(uarg, sizeof(*uarg))) | |
| return -EFAULT; | |
| unsafe_get_user(arg.sigmask, &uarg->sigmask, uaccess_end); | |
| unsafe_get_user(arg.sigmask_sz, &uarg->sigmask_sz, uaccess_end); | |
| unsafe_get_user(arg.min_wait_usec, &uarg->min_wait_usec, uaccess_end); | |
| unsafe_get_user(arg.ts, &uarg->ts, uaccess_end); | |
| user_access_end(); | |
| #else | |
| if (copy_from_user(&arg, uarg, sizeof(arg))) | |
| return -EFAULT; | |
| #endif | |
| ext_arg->min_time = arg.min_wait_usec * NSEC_PER_USEC; | |
| ext_arg->sig = u64_to_user_ptr(arg.sigmask); | |
| ext_arg->argsz = arg.sigmask_sz; | |
| if (arg.ts) { | |
| if (get_timespec64(&ext_arg->ts, u64_to_user_ptr(arg.ts))) | |
| return -EFAULT; | |
| ext_arg->ts_set = true; | |
| } | |
| return 0; | |
| #ifdef CONFIG_64BIT | |
| uaccess_end: | |
| user_access_end(); | |
| return -EFAULT; | |
| #endif | |
| } | |
| /* | |
| * Given an 'fd' value, return the ctx associated with if. If 'registered' is | |
| * true, then the registered index is used. Otherwise, the normal fd table. | |
| * Caller must call fput() on the returned file if it isn't a registered file, | |
| * unless it's an ERR_PTR. | |
| */ | |
| struct file *io_uring_ctx_get_file(unsigned int fd, bool registered) | |
| { | |
| struct file *file; | |
| if (registered) { | |
| /* | |
| * Ring fd has been registered via IORING_REGISTER_RING_FDS, we | |
| * need only dereference our task private array to find it. | |
| */ | |
| struct io_uring_task *tctx = current->io_uring; | |
| if (unlikely(!tctx || fd >= IO_RINGFD_REG_MAX)) | |
| return ERR_PTR(-EINVAL); | |
| fd = array_index_nospec(fd, IO_RINGFD_REG_MAX); | |
| file = tctx->registered_rings[fd]; | |
| } else { | |
| file = fget(fd); | |
| } | |
| if (unlikely(!file)) | |
| return ERR_PTR(-EBADF); | |
| if (io_is_uring_fops(file)) | |
| return file; | |
| if (!registered) | |
| fput(file); | |
| return ERR_PTR(-EOPNOTSUPP); | |
| } | |
| SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit, | |
| u32, min_complete, u32, flags, const void __user *, argp, | |
| size_t, argsz) | |
| { | |
| struct io_ring_ctx *ctx; | |
| struct file *file; | |
| long ret; | |
| if (unlikely(flags & ~IORING_ENTER_FLAGS)) | |
| return -EINVAL; | |
| file = io_uring_ctx_get_file(fd, flags & IORING_ENTER_REGISTERED_RING); | |
| if (IS_ERR(file)) | |
| return PTR_ERR(file); | |
| ctx = file->private_data; | |
| ret = -EBADFD; | |
| /* | |
| * Keep IORING_SETUP_R_DISABLED check before submitter_task load | |
| * in io_uring_add_tctx_node() -> __io_uring_add_tctx_node_from_submit() | |
| */ | |
| if (unlikely(smp_load_acquire(&ctx->flags) & IORING_SETUP_R_DISABLED)) | |
| goto out; | |
| if (io_has_loop_ops(ctx)) { | |
| ret = io_run_loop(ctx); | |
| goto out; | |
| } | |
| /* | |
| * For SQ polling, the thread will do all submissions and completions. | |
| * Just return the requested submit count, and wake the thread if | |
| * we were asked to. | |
| */ | |
| ret = 0; | |
| if (ctx->flags & IORING_SETUP_SQPOLL) { | |
| if (unlikely(ctx->sq_data->thread == NULL)) { | |
| ret = -EOWNERDEAD; | |
| goto out; | |
| } | |
| if (flags & IORING_ENTER_SQ_WAKEUP) | |
| wake_up(&ctx->sq_data->wait); | |
| if (flags & IORING_ENTER_SQ_WAIT) | |
| io_sqpoll_wait_sq(ctx); | |
| ret = to_submit; | |
| } else if (to_submit) { | |
| ret = io_uring_add_tctx_node(ctx); | |
| if (unlikely(ret)) | |
| goto out; | |
| mutex_lock(&ctx->uring_lock); | |
| ret = io_submit_sqes(ctx, to_submit); | |
| if (ret != to_submit) { | |
| mutex_unlock(&ctx->uring_lock); | |
| goto out; | |
| } | |
| if (flags & IORING_ENTER_GETEVENTS) { | |
| if (ctx->int_flags & IO_RING_F_SYSCALL_IOPOLL) | |
| goto iopoll_locked; | |
| /* | |
| * Ignore errors, we'll soon call io_cqring_wait() and | |
| * it should handle ownership problems if any. | |
| */ | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) | |
| (void)io_run_local_work_locked(ctx, min_complete); | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| if (flags & IORING_ENTER_GETEVENTS) { | |
| int ret2; | |
| if (ctx->int_flags & IO_RING_F_SYSCALL_IOPOLL) { | |
| /* | |
| * We disallow the app entering submit/complete with | |
| * polling, but we still need to lock the ring to | |
| * prevent racing with polled issue that got punted to | |
| * a workqueue. | |
| */ | |
| mutex_lock(&ctx->uring_lock); | |
| iopoll_locked: | |
| ret2 = io_validate_ext_arg(ctx, flags, argp, argsz); | |
| if (likely(!ret2)) | |
| ret2 = io_iopoll_check(ctx, min_complete); | |
| mutex_unlock(&ctx->uring_lock); | |
| } else { | |
| struct ext_arg ext_arg = { .argsz = argsz }; | |
| ret2 = io_get_ext_arg(ctx, flags, argp, &ext_arg); | |
| if (likely(!ret2)) | |
| ret2 = io_cqring_wait(ctx, min_complete, flags, | |
| &ext_arg); | |
| } | |
| if (!ret) { | |
| ret = ret2; | |
| /* | |
| * EBADR indicates that one or more CQE were dropped. | |
| * Once the user has been informed we can clear the bit | |
| * as they are obviously ok with those drops. | |
| */ | |
| if (unlikely(ret2 == -EBADR)) | |
| clear_bit(IO_CHECK_CQ_DROPPED_BIT, | |
| &ctx->check_cq); | |
| } | |
| } | |
| out: | |
| if (!(flags & IORING_ENTER_REGISTERED_RING)) | |
| fput(file); | |
| return ret; | |
| } | |
| static const struct file_operations io_uring_fops = { | |
| .release = io_uring_release, | |
| .mmap = io_uring_mmap, | |
| .get_unmapped_area = io_uring_get_unmapped_area, | |
| #ifndef CONFIG_MMU | |
| .mmap_capabilities = io_uring_nommu_mmap_capabilities, | |
| #endif | |
| .poll = io_uring_poll, | |
| #ifdef CONFIG_PROC_FS | |
| .show_fdinfo = io_uring_show_fdinfo, | |
| #endif | |
| }; | |
| bool io_is_uring_fops(struct file *file) | |
| { | |
| return file->f_op == &io_uring_fops; | |
| } | |
| static __cold int io_allocate_scq_urings(struct io_ring_ctx *ctx, | |
| struct io_ctx_config *config) | |
| { | |
| struct io_uring_params *p = &config->p; | |
| struct io_rings_layout *rl = &config->layout; | |
| struct io_uring_region_desc rd; | |
| struct io_rings *rings; | |
| int ret; | |
| /* make sure these are sane, as we already accounted them */ | |
| ctx->sq_entries = p->sq_entries; | |
| ctx->cq_entries = p->cq_entries; | |
| memset(&rd, 0, sizeof(rd)); | |
| rd.size = PAGE_ALIGN(rl->rings_size); | |
| if (ctx->flags & IORING_SETUP_NO_MMAP) { | |
| rd.user_addr = p->cq_off.user_addr; | |
| rd.flags |= IORING_MEM_REGION_TYPE_USER; | |
| } | |
| /* ring memory is not charged to RLIMIT_MEMLOCK, hence no user */ | |
| ret = io_create_region(NULL, &ctx->ring_region, &rd, IORING_OFF_CQ_RING); | |
| if (ret) | |
| return ret; | |
| ctx->rings = rings = io_region_get_ptr(&ctx->ring_region); | |
| rcu_assign_pointer(ctx->rings_rcu, rings); | |
| if (!(ctx->flags & IORING_SETUP_NO_SQARRAY)) | |
| ctx->sq_array = (u32 *)((char *)rings + rl->sq_array_offset); | |
| memset(&rd, 0, sizeof(rd)); | |
| rd.size = PAGE_ALIGN(rl->sq_size); | |
| if (ctx->flags & IORING_SETUP_NO_MMAP) { | |
| rd.user_addr = p->sq_off.user_addr; | |
| rd.flags |= IORING_MEM_REGION_TYPE_USER; | |
| } | |
| ret = io_create_region(NULL, &ctx->sq_region, &rd, IORING_OFF_SQES); | |
| if (ret) { | |
| io_rings_free(ctx); | |
| return ret; | |
| } | |
| ctx->sq_sqes = io_region_get_ptr(&ctx->sq_region); | |
| memset(rings, 0, sizeof(*rings)); | |
| WRITE_ONCE(rings->sq_ring_mask, ctx->sq_entries - 1); | |
| WRITE_ONCE(rings->cq_ring_mask, ctx->cq_entries - 1); | |
| WRITE_ONCE(rings->sq_ring_entries, ctx->sq_entries); | |
| WRITE_ONCE(rings->cq_ring_entries, ctx->cq_entries); | |
| return 0; | |
| } | |
| static int io_uring_install_fd(struct file *file) | |
| { | |
| int fd; | |
| fd = get_unused_fd_flags(O_RDWR | O_CLOEXEC); | |
| if (fd < 0) | |
| return fd; | |
| fd_install(fd, file); | |
| return fd; | |
| } | |
| /* | |
| * Allocate an anonymous fd, this is what constitutes the application | |
| * visible backing of an io_uring instance. The application mmaps this | |
| * fd to gain access to the SQ/CQ ring details. | |
| */ | |
| static struct file *io_uring_get_file(struct io_ring_ctx *ctx) | |
| { | |
| /* Create a new inode so that the LSM can block the creation. */ | |
| return anon_inode_create_getfile("[io_uring]", &io_uring_fops, ctx, | |
| O_RDWR | O_CLOEXEC, NULL); | |
| } | |
| static int io_uring_sanitise_params(struct io_uring_params *p) | |
| { | |
| unsigned flags = p->flags; | |
| if (flags & ~IORING_SETUP_FLAGS) | |
| return -EINVAL; | |
| if (flags & IORING_SETUP_SQ_REWIND) { | |
| if ((flags & IORING_SETUP_SQPOLL) || | |
| !(flags & IORING_SETUP_NO_SQARRAY)) | |
| return -EINVAL; | |
| } | |
| /* There is no way to mmap rings without a real fd */ | |
| if ((flags & IORING_SETUP_REGISTERED_FD_ONLY) && | |
| !(flags & IORING_SETUP_NO_MMAP)) | |
| return -EINVAL; | |
| if (flags & IORING_SETUP_SQPOLL) { | |
| /* IPI related flags don't make sense with SQPOLL */ | |
| if (flags & (IORING_SETUP_COOP_TASKRUN | | |
| IORING_SETUP_TASKRUN_FLAG | | |
| IORING_SETUP_DEFER_TASKRUN)) | |
| return -EINVAL; | |
| } | |
| if (flags & IORING_SETUP_TASKRUN_FLAG) { | |
| if (!(flags & (IORING_SETUP_COOP_TASKRUN | | |
| IORING_SETUP_DEFER_TASKRUN))) | |
| return -EINVAL; | |
| } | |
| /* HYBRID_IOPOLL only valid with IOPOLL */ | |
| if ((flags & IORING_SETUP_HYBRID_IOPOLL) && !(flags & IORING_SETUP_IOPOLL)) | |
| return -EINVAL; | |
| /* | |
| * For DEFER_TASKRUN we require the completion task to be the same as | |
| * the submission task. This implies that there is only one submitter. | |
| */ | |
| if ((flags & IORING_SETUP_DEFER_TASKRUN) && | |
| !(flags & IORING_SETUP_SINGLE_ISSUER)) | |
| return -EINVAL; | |
| /* | |
| * Nonsensical to ask for CQE32 and mixed CQE support, it's not | |
| * supported to post 16b CQEs on a ring setup with CQE32. | |
| */ | |
| if ((flags & (IORING_SETUP_CQE32|IORING_SETUP_CQE_MIXED)) == | |
| (IORING_SETUP_CQE32|IORING_SETUP_CQE_MIXED)) | |
| return -EINVAL; | |
| /* | |
| * Nonsensical to ask for SQE128 and mixed SQE support, it's not | |
| * supported to post 64b SQEs on a ring setup with SQE128. | |
| */ | |
| if ((flags & (IORING_SETUP_SQE128|IORING_SETUP_SQE_MIXED)) == | |
| (IORING_SETUP_SQE128|IORING_SETUP_SQE_MIXED)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int io_uring_fill_params(struct io_uring_params *p) | |
| { | |
| unsigned entries = p->sq_entries; | |
| if (!entries) | |
| return -EINVAL; | |
| if (entries > IORING_MAX_ENTRIES) { | |
| if (!(p->flags & IORING_SETUP_CLAMP)) | |
| return -EINVAL; | |
| entries = IORING_MAX_ENTRIES; | |
| } | |
| /* | |
| * Use twice as many entries for the CQ ring. It's possible for the | |
| * application to drive a higher depth than the size of the SQ ring, | |
| * since the sqes are only used at submission time. This allows for | |
| * some flexibility in overcommitting a bit. If the application has | |
| * set IORING_SETUP_CQSIZE, it will have passed in the desired number | |
| * of CQ ring entries manually. | |
| */ | |
| p->sq_entries = roundup_pow_of_two(entries); | |
| if (p->flags & IORING_SETUP_CQSIZE) { | |
| /* | |
| * If IORING_SETUP_CQSIZE is set, we do the same roundup | |
| * to a power-of-two, if it isn't already. We do NOT impose | |
| * any cq vs sq ring sizing. | |
| */ | |
| if (!p->cq_entries) | |
| return -EINVAL; | |
| if (p->cq_entries > IORING_MAX_CQ_ENTRIES) { | |
| if (!(p->flags & IORING_SETUP_CLAMP)) | |
| return -EINVAL; | |
| p->cq_entries = IORING_MAX_CQ_ENTRIES; | |
| } | |
| p->cq_entries = roundup_pow_of_two(p->cq_entries); | |
| if (p->cq_entries < p->sq_entries) | |
| return -EINVAL; | |
| } else { | |
| p->cq_entries = 2 * p->sq_entries; | |
| } | |
| return 0; | |
| } | |
| int io_prepare_config(struct io_ctx_config *config) | |
| { | |
| struct io_uring_params *p = &config->p; | |
| int ret; | |
| ret = io_uring_sanitise_params(p); | |
| if (ret) | |
| return ret; | |
| ret = io_uring_fill_params(p); | |
| if (ret) | |
| return ret; | |
| ret = rings_size(p->flags, p->sq_entries, p->cq_entries, | |
| &config->layout); | |
| if (ret) | |
| return ret; | |
| p->sq_off.head = offsetof(struct io_rings, sq.head); | |
| p->sq_off.tail = offsetof(struct io_rings, sq.tail); | |
| p->sq_off.ring_mask = offsetof(struct io_rings, sq_ring_mask); | |
| p->sq_off.ring_entries = offsetof(struct io_rings, sq_ring_entries); | |
| p->sq_off.flags = offsetof(struct io_rings, sq_flags); | |
| p->sq_off.dropped = offsetof(struct io_rings, sq_dropped); | |
| p->sq_off.resv1 = 0; | |
| if (!(p->flags & IORING_SETUP_NO_MMAP)) | |
| p->sq_off.user_addr = 0; | |
| p->cq_off.head = offsetof(struct io_rings, cq.head); | |
| p->cq_off.tail = offsetof(struct io_rings, cq.tail); | |
| p->cq_off.ring_mask = offsetof(struct io_rings, cq_ring_mask); | |
| p->cq_off.ring_entries = offsetof(struct io_rings, cq_ring_entries); | |
| p->cq_off.overflow = offsetof(struct io_rings, cq_overflow); | |
| p->cq_off.cqes = offsetof(struct io_rings, cqes); | |
| p->cq_off.flags = offsetof(struct io_rings, cq_flags); | |
| p->cq_off.resv1 = 0; | |
| if (!(p->flags & IORING_SETUP_NO_MMAP)) | |
| p->cq_off.user_addr = 0; | |
| if (!(p->flags & IORING_SETUP_NO_SQARRAY)) | |
| p->sq_off.array = config->layout.sq_array_offset; | |
| return 0; | |
| } | |
| void io_restriction_clone(struct io_restriction *dst, struct io_restriction *src) | |
| { | |
| memcpy(&dst->register_op, &src->register_op, sizeof(dst->register_op)); | |
| memcpy(&dst->sqe_op, &src->sqe_op, sizeof(dst->sqe_op)); | |
| dst->sqe_flags_allowed = src->sqe_flags_allowed; | |
| dst->sqe_flags_required = src->sqe_flags_required; | |
| dst->op_registered = src->op_registered; | |
| dst->reg_registered = src->reg_registered; | |
| io_bpf_filter_clone(dst, src); | |
| } | |
| static void io_ctx_restriction_clone(struct io_ring_ctx *ctx, | |
| struct io_restriction *src) | |
| { | |
| struct io_restriction *dst = &ctx->restrictions; | |
| io_restriction_clone(dst, src); | |
| if (dst->bpf_filters) | |
| WRITE_ONCE(ctx->bpf_filters, dst->bpf_filters->filters); | |
| if (dst->op_registered) | |
| ctx->int_flags |= IO_RING_F_OP_RESTRICTED; | |
| if (dst->reg_registered) | |
| ctx->int_flags |= IO_RING_F_REG_RESTRICTED | | |
| IO_RING_F_RESTRICT_INHERITED; | |
| } | |
| static __cold int io_uring_create(struct io_ctx_config *config) | |
| { | |
| struct io_uring_params *p = &config->p; | |
| struct io_ring_ctx *ctx; | |
| struct io_uring_task *tctx; | |
| struct file *file; | |
| int ret; | |
| ret = io_prepare_config(config); | |
| if (ret) | |
| return ret; | |
| ctx = io_ring_ctx_alloc(p); | |
| if (!ctx) | |
| return -ENOMEM; | |
| ctx->clockid = CLOCK_MONOTONIC; | |
| ctx->clock_offset = 0; | |
| if (!(ctx->flags & IORING_SETUP_NO_SQARRAY)) | |
| static_branch_deferred_inc(&io_key_has_sqarray); | |
| if ((ctx->flags & IORING_SETUP_DEFER_TASKRUN) && | |
| !(ctx->flags & IORING_SETUP_IOPOLL)) | |
| ctx->int_flags |= IO_RING_F_TASK_COMPLETE; | |
| if ((ctx->int_flags & IO_RING_F_TASK_COMPLETE) || | |
| (ctx->flags & IORING_SETUP_IOPOLL)) | |
| ctx->int_flags |= IO_RING_F_LOCKLESS_CQ; | |
| /* | |
| * lazy poll_wq activation relies on ->task_complete for synchronisation | |
| * purposes, see io_activate_pollwq() | |
| */ | |
| if (!(ctx->int_flags & IO_RING_F_TASK_COMPLETE)) | |
| ctx->int_flags |= IO_RING_F_POLL_ACTIVATED; | |
| /* | |
| * When SETUP_IOPOLL and SETUP_SQPOLL are both enabled, user | |
| * space applications don't need to do io completion events | |
| * polling again, they can rely on io_sq_thread to do polling | |
| * work, which can reduce cpu usage and uring_lock contention. | |
| */ | |
| if (ctx->flags & IORING_SETUP_IOPOLL && | |
| !(ctx->flags & IORING_SETUP_SQPOLL)) | |
| ctx->int_flags |= IO_RING_F_SYSCALL_IOPOLL; | |
| if (in_compat_syscall()) | |
| ctx->int_flags |= IO_RING_F_COMPAT; | |
| if (!ns_capable_noaudit(&init_user_ns, CAP_IPC_LOCK)) | |
| ctx->user = get_uid(current_user()); | |
| /* | |
| * For SQPOLL, we just need a wakeup, always. For !SQPOLL, if | |
| * COOP_TASKRUN is set, then IPIs are never needed by the app. | |
| */ | |
| if (ctx->flags & (IORING_SETUP_SQPOLL|IORING_SETUP_COOP_TASKRUN)) | |
| ctx->notify_method = TWA_SIGNAL_NO_IPI; | |
| else | |
| ctx->notify_method = TWA_SIGNAL; | |
| /* | |
| * If the current task has restrictions enabled, then copy them to | |
| * our newly created ring and mark it as registered. | |
| */ | |
| if (current->io_uring_restrict) | |
| io_ctx_restriction_clone(ctx, current->io_uring_restrict); | |
| /* | |
| * This is just grabbed for accounting purposes. When a process exits, | |
| * the mm is exited and dropped before the files, hence we need to hang | |
| * on to this mm purely for the purposes of being able to unaccount | |
| * memory (locked/pinned vm). It's not used for anything else. | |
| */ | |
| mmgrab(current->mm); | |
| ctx->mm_account = current->mm; | |
| ret = io_allocate_scq_urings(ctx, config); | |
| if (ret) | |
| goto err; | |
| ret = io_sq_offload_create(ctx, p); | |
| if (ret) | |
| goto err; | |
| p->features = IORING_FEAT_FLAGS; | |
| if (copy_to_user(config->uptr, p, sizeof(*p))) { | |
| ret = -EFAULT; | |
| goto err; | |
| } | |
| if (ctx->flags & IORING_SETUP_SINGLE_ISSUER | |
| && !(ctx->flags & IORING_SETUP_R_DISABLED)) | |
| ctx->submitter_task = get_task_struct(current); | |
| file = io_uring_get_file(ctx); | |
| if (IS_ERR(file)) { | |
| ret = PTR_ERR(file); | |
| goto err; | |
| } | |
| ret = __io_uring_add_tctx_node(ctx); | |
| if (ret) | |
| goto err_fput; | |
| tctx = current->io_uring; | |
| /* | |
| * Install ring fd as the very last thing, so we don't risk someone | |
| * having closed it before we finish setup | |
| */ | |
| if (p->flags & IORING_SETUP_REGISTERED_FD_ONLY) | |
| ret = io_ring_add_registered_file(tctx, file, 0, IO_RINGFD_REG_MAX); | |
| else | |
| ret = io_uring_install_fd(file); | |
| if (ret < 0) | |
| goto err_fput; | |
| trace_io_uring_create(ret, ctx, p->sq_entries, p->cq_entries, p->flags); | |
| return ret; | |
| err: | |
| io_ring_ctx_wait_and_kill(ctx); | |
| return ret; | |
| err_fput: | |
| fput(file); | |
| return ret; | |
| } | |
| /* | |
| * Sets up an aio uring context, and returns the fd. Applications asks for a | |
| * ring size, we return the actual sq/cq ring sizes (among other things) in the | |
| * params structure passed in. | |
| */ | |
| static long io_uring_setup(u32 entries, struct io_uring_params __user *params) | |
| { | |
| struct io_ctx_config config; | |
| memset(&config, 0, sizeof(config)); | |
| if (copy_from_user(&config.p, params, sizeof(config.p))) | |
| return -EFAULT; | |
| if (!mem_is_zero(&config.p.resv, sizeof(config.p.resv))) | |
| return -EINVAL; | |
| config.p.sq_entries = entries; | |
| config.uptr = params; | |
| return io_uring_create(&config); | |
| } | |
| static inline int io_uring_allowed(void) | |
| { | |
| int disabled = READ_ONCE(sysctl_io_uring_disabled); | |
| kgid_t io_uring_group; | |
| if (disabled == 2) | |
| return -EPERM; | |
| if (disabled == 0 || capable(CAP_SYS_ADMIN)) | |
| goto allowed_lsm; | |
| io_uring_group = make_kgid(&init_user_ns, sysctl_io_uring_group); | |
| if (!gid_valid(io_uring_group)) | |
| return -EPERM; | |
| if (!in_group_p(io_uring_group)) | |
| return -EPERM; | |
| allowed_lsm: | |
| return security_uring_allowed(); | |
| } | |
| SYSCALL_DEFINE2(io_uring_setup, u32, entries, | |
| struct io_uring_params __user *, params) | |
| { | |
| int ret; | |
| ret = io_uring_allowed(); | |
| if (ret) | |
| return ret; | |
| return io_uring_setup(entries, params); | |
| } | |
| static int __init io_uring_init(void) | |
| { | |
| struct kmem_cache_args kmem_args = { | |
| .useroffset = offsetof(struct io_kiocb, cmd.data), | |
| .usersize = sizeof_field(struct io_kiocb, cmd.data), | |
| .freeptr_offset = offsetof(struct io_kiocb, work), | |
| .use_freeptr_offset = true, | |
| }; | |
| #define __BUILD_BUG_VERIFY_OFFSET_SIZE(stype, eoffset, esize, ename) do { \ | |
| BUILD_BUG_ON(offsetof(stype, ename) != eoffset); \ | |
| BUILD_BUG_ON(sizeof_field(stype, ename) != esize); \ | |
| } while (0) | |
| #define BUILD_BUG_SQE_ELEM(eoffset, etype, ename) \ | |
| __BUILD_BUG_VERIFY_OFFSET_SIZE(struct io_uring_sqe, eoffset, sizeof(etype), ename) | |
| #define BUILD_BUG_SQE_ELEM_SIZE(eoffset, esize, ename) \ | |
| __BUILD_BUG_VERIFY_OFFSET_SIZE(struct io_uring_sqe, eoffset, esize, ename) | |
| BUILD_BUG_ON(sizeof(struct io_uring_sqe) != 64); | |
| BUILD_BUG_SQE_ELEM(0, __u8, opcode); | |
| BUILD_BUG_SQE_ELEM(1, __u8, flags); | |
| BUILD_BUG_SQE_ELEM(2, __u16, ioprio); | |
| BUILD_BUG_SQE_ELEM(4, __s32, fd); | |
| BUILD_BUG_SQE_ELEM(8, __u64, off); | |
| BUILD_BUG_SQE_ELEM(8, __u64, addr2); | |
| BUILD_BUG_SQE_ELEM(8, __u32, cmd_op); | |
| BUILD_BUG_SQE_ELEM(12, __u32, __pad1); | |
| BUILD_BUG_SQE_ELEM(16, __u64, addr); | |
| BUILD_BUG_SQE_ELEM(16, __u64, splice_off_in); | |
| BUILD_BUG_SQE_ELEM(24, __u32, len); | |
| BUILD_BUG_SQE_ELEM(28, __kernel_rwf_t, rw_flags); | |
| BUILD_BUG_SQE_ELEM(28, /* compat */ int, rw_flags); | |
| BUILD_BUG_SQE_ELEM(28, /* compat */ __u32, rw_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, fsync_flags); | |
| BUILD_BUG_SQE_ELEM(28, /* compat */ __u16, poll_events); | |
| BUILD_BUG_SQE_ELEM(28, __u32, poll32_events); | |
| BUILD_BUG_SQE_ELEM(28, __u32, sync_range_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, msg_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, timeout_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, accept_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, cancel_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, open_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, statx_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, fadvise_advice); | |
| BUILD_BUG_SQE_ELEM(28, __u32, splice_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, rename_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, unlink_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, hardlink_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, xattr_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, msg_ring_flags); | |
| BUILD_BUG_SQE_ELEM(32, __u64, user_data); | |
| BUILD_BUG_SQE_ELEM(40, __u16, buf_index); | |
| BUILD_BUG_SQE_ELEM(40, __u16, buf_group); | |
| BUILD_BUG_SQE_ELEM(42, __u16, personality); | |
| BUILD_BUG_SQE_ELEM(44, __s32, splice_fd_in); | |
| BUILD_BUG_SQE_ELEM(44, __u32, file_index); | |
| BUILD_BUG_SQE_ELEM(44, __u16, addr_len); | |
| BUILD_BUG_SQE_ELEM(44, __u8, write_stream); | |
| BUILD_BUG_SQE_ELEM(45, __u8, __pad4[0]); | |
| BUILD_BUG_SQE_ELEM(46, __u16, __pad3[0]); | |
| BUILD_BUG_SQE_ELEM(48, __u64, addr3); | |
| BUILD_BUG_SQE_ELEM_SIZE(48, 0, cmd); | |
| BUILD_BUG_SQE_ELEM(48, __u64, attr_ptr); | |
| BUILD_BUG_SQE_ELEM(56, __u64, attr_type_mask); | |
| BUILD_BUG_SQE_ELEM(56, __u64, __pad2); | |
| BUILD_BUG_ON(sizeof(struct io_uring_files_update) != | |
| sizeof(struct io_uring_rsrc_update)); | |
| BUILD_BUG_ON(sizeof(struct io_uring_rsrc_update) > | |
| sizeof(struct io_uring_rsrc_update2)); | |
| /* ->buf_index is u16 */ | |
| BUILD_BUG_ON(offsetof(struct io_uring_buf_ring, bufs) != 0); | |
| BUILD_BUG_ON(offsetof(struct io_uring_buf, resv) != | |
| offsetof(struct io_uring_buf_ring, tail)); | |
| /* should fit into one byte */ | |
| BUILD_BUG_ON(SQE_VALID_FLAGS >= (1 << 8)); | |
| BUILD_BUG_ON(SQE_COMMON_FLAGS >= (1 << 8)); | |
| BUILD_BUG_ON((SQE_VALID_FLAGS | SQE_COMMON_FLAGS) != SQE_VALID_FLAGS); | |
| BUILD_BUG_ON(__REQ_F_LAST_BIT > 8 * sizeof_field(struct io_kiocb, flags)); | |
| BUILD_BUG_ON(sizeof(atomic_t) != sizeof(u32)); | |
| /* top 8bits are for internal use */ | |
| BUILD_BUG_ON((IORING_URING_CMD_MASK & 0xff000000) != 0); | |
| io_uring_optable_init(); | |
| /* imu->dir is u8 */ | |
| BUILD_BUG_ON((IO_BUF_DEST | IO_BUF_SOURCE) > U8_MAX); | |
| /* | |
| * Allow user copy in the per-command field, which starts after the | |
| * file in io_kiocb and until the opcode field. The openat2 handling | |
| * requires copying in user memory into the io_kiocb object in that | |
| * range, and HARDENED_USERCOPY will complain if we haven't | |
| * correctly annotated this range. | |
| */ | |
| req_cachep = kmem_cache_create("io_kiocb", sizeof(struct io_kiocb), &kmem_args, | |
| SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT | | |
| SLAB_TYPESAFE_BY_RCU); | |
| iou_wq = alloc_workqueue("iou_exit", WQ_UNBOUND, 64); | |
| BUG_ON(!iou_wq); | |
| #ifdef CONFIG_SYSCTL | |
| register_sysctl_init("kernel", kernel_io_uring_disabled_table); | |
| #endif | |
| return 0; | |
| }; | |
| __initcall(io_uring_init); |