Merge tag 'sound-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few fixes: all small and device-specific (ASoC FSL, SOF, and
HD-audio quirks), should be safe to apply at the last minute"
* tag 'sound-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: fsl_asrc_dma: fix potential null-ptr-deref
ASoC: fsl_sai: Fix pins setting for i.MX8QM platform
ALSA: hda/realtek: Remove specific patch for Dell Precision 3260
ASoC: max98373: change power down sequence for smart amp
ASoC: SOF: pm: Tear down pipelines only if DSP was active
ASoC: SOF: ipc4-topology: Clarify bind failure caused by missing fw_module
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3b9f077..f70d6a3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9288,7 +9288,6 @@
SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK),
SND_PCI_QUIRK(0x1028, 0x0a9d, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0a9e, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE),
- SND_PCI_QUIRK(0x1028, 0x0ac9, "Dell Precision 3260", ALC283_FIXUP_CHROME_BOOK),
SND_PCI_QUIRK(0x1028, 0x0b19, "Dell XPS 15 9520", ALC289_FIXUP_DUAL_SPK),
SND_PCI_QUIRK(0x1028, 0x0b1a, "Dell Precision 5570", ALC289_FIXUP_DUAL_SPK),
SND_PCI_QUIRK(0x1028, 0x0b37, "Dell Inspiron 16 Plus 7620 2-in-1", ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS),
@@ -9469,6 +9468,7 @@
SND_PCI_QUIRK(0x103c, 0x8b47, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8b5d, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
SND_PCI_QUIRK(0x103c, 0x8b5e, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
+ SND_PCI_QUIRK(0x103c, 0x8b65, "HP ProBook 455 15.6 inch G10 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
SND_PCI_QUIRK(0x103c, 0x8b66, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
SND_PCI_QUIRK(0x103c, 0x8b7a, "HP", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8b7d, "HP", ALC236_FIXUP_HP_GPIO_LED),
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index f90a6a7..fde055c 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -31,7 +31,7 @@
MAX98373_GLOBAL_EN_MASK, 1);
usleep_range(30000, 31000);
break;
- case SND_SOC_DAPM_POST_PMD:
+ case SND_SOC_DAPM_PRE_PMD:
regmap_update_bits(max98373->regmap,
MAX98373_R20FF_GLOBAL_SHDN,
MAX98373_GLOBAL_EN_MASK, 0);
@@ -64,7 +64,7 @@
static const struct snd_soc_dapm_widget max98373_dapm_widgets[] = {
SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback",
MAX98373_R202B_PCM_RX_EN, 0, 0, max98373_dac_event,
- SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0,
&max98373_dai_controls),
SND_SOC_DAPM_OUTPUT("BE_OUT"),
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 3b81a46..05a7d15 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -209,14 +209,19 @@
be_chan = soc_component_to_pcm(component_be)->chan[substream->stream];
tmp_chan = be_chan;
}
- if (!tmp_chan)
- tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
+ if (!tmp_chan) {
+ tmp_chan = dma_request_chan(dev_be, tx ? "tx" : "rx");
+ if (IS_ERR(tmp_chan)) {
+ dev_err(dev, "failed to request DMA channel for Back-End\n");
+ return -EINVAL;
+ }
+ }
/*
* An EDMA DEV_TO_DEV channel is fixed and bound with DMA event of each
* peripheral, unlike SDMA channel that is allocated dynamically. So no
* need to configure dma_request and dma_request2, but get dma_chan of
- * Back-End device directly via dma_request_slave_channel.
+ * Back-End device directly via dma_request_chan.
*/
if (!asrc->use_edma) {
/* Get DMA request of Back-End */
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 1b19747..990bba0 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -1546,7 +1546,7 @@
.use_imx_pcm = true,
.use_edma = true,
.fifo_depth = 64,
- .pins = 1,
+ .pins = 4,
.reg_offset = 0,
.mclk0_is_mclk1 = false,
.flags = 0,
diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index 669b99a..3a5394c 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -1806,10 +1806,12 @@
int ret;
if (!src_fw_module || !sink_fw_module) {
- /* The NULL module will print as "(efault)" */
- dev_err(sdev->dev, "source %s or sink %s widget weren't set up properly\n",
- src_fw_module->man4_module_entry.name,
- sink_fw_module->man4_module_entry.name);
+ dev_err(sdev->dev,
+ "cannot bind %s -> %s, no firmware module for: %s%s\n",
+ src_widget->widget->name, sink_widget->widget->name,
+ src_fw_module ? "" : " source",
+ sink_fw_module ? "" : " sink");
+
return -ENODEV;
}
diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c
index 8d33830..85412ae 100644
--- a/sound/soc/sof/pm.c
+++ b/sound/soc/sof/pm.c
@@ -183,6 +183,7 @@
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
pm_message_t pm_state;
u32 target_state = snd_sof_dsp_power_target(sdev);
+ u32 old_state = sdev->dsp_power_state.state;
int ret;
/* do nothing if dsp suspend callback is not set */
@@ -192,7 +193,12 @@
if (runtime_suspend && !sof_ops(sdev)->runtime_suspend)
return 0;
- if (tplg_ops && tplg_ops->tear_down_all_pipelines)
+ /* we need to tear down pipelines only if the DSP hardware is
+ * active, which happens for PCI devices. if the device is
+ * suspended, it is brought back to full power and then
+ * suspended again
+ */
+ if (tplg_ops && tplg_ops->tear_down_all_pipelines && (old_state == SOF_DSP_PM_D0))
tplg_ops->tear_down_all_pipelines(sdev, false);
if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
